Merge to Fedora kernel-2.6.18-1.2224_FC5 patched with stable patch-2.6.18.1-vs2.0...

[linux-2.6.git] / drivers / serial / Kconfig

diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index d271617..48f0eef 100644 (file)
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -301,21 +301,22 @@ config SERIAL_AMBA_PL011_CONSOLE
          kernel at boot time.)
 
 config SERIAL_AT91
-       bool "AT91RM9200 serial port support"
-       depends on ARM && ARCH_AT91RM9200
+       bool "AT91RM9200 / AT91SAM9261 serial port support"
+       depends on ARM && (ARCH_AT91RM9200 || ARCH_AT91SAM9261)
        select SERIAL_CORE
        help
-         This enables the driver for the on-chip UARTs of the AT91RM9200
-         processor.
+         This enables the driver for the on-chip UARTs of the Atmel
+         AT91RM9200 and AT91SAM926 processor.
 
 config SERIAL_AT91_CONSOLE
-       bool "Support for console on AT91RM9200 serial port"
+       bool "Support for console on AT91RM9200 / AT91SAM9261 serial port"
        depends on SERIAL_AT91=y
        select SERIAL_CORE_CONSOLE
        help
-         Say Y here if you wish to use a UART on the AT91RM9200 as the system
-         console (the system console is the device which receives all kernel
-         messages and warnings and which allows logins in single user mode).
+         Say Y here if you wish to use a UART on the Atmel AT91RM9200 or
+         AT91SAM9261 as the system console (the system console is the device
+         which receives all kernel messages and warnings and which allows
+         logins in single user mode).
 
 config SERIAL_AT91_TTYAT
        bool "Install as device ttyAT0-4 instead of ttyS0-4"
@@ -354,21 +355,24 @@ config SERIAL_CLPS711X_CONSOLE
          kernel at boot time.)
 
 config SERIAL_S3C2410
-       tristate "Samsung S3C2410 Serial port support"
+       tristate "Samsung S3C2410/S3C2440/S3C2442/S3C2412 Serial port support"
        depends on ARM && ARCH_S3C2410
        select SERIAL_CORE
        help
-         Support for the on-chip UARTs on the Samsung S3C2410X CPU,
+         Support for the on-chip UARTs on the Samsung S3C24XX series CPUs,
          providing /dev/ttySAC0, 1 and 2 (note, some machines may not
          provide all of these ports, depending on how the serial port
          pins are configured.
 
+         Currently this driver supports the UARTS on the S3C2410, S3C2440,
+         S3C2442, S3C2412 and S3C2413 CPUs.
+
 config SERIAL_S3C2410_CONSOLE
        bool "Support for console on S3C2410 serial port"
        depends on SERIAL_S3C2410=y
        select SERIAL_CORE_CONSOLE
        help
-         Allow selection of the S3C2410 on-board serial ports for use as
+         Allow selection of the S3C24XX on-board serial ports for use as
          an virtual console.
 
          Even if you say Y here, the currently visible virtual console
@@ -804,7 +808,6 @@ config SERIAL_MPC52xx
        tristate "Freescale MPC52xx family PSC serial support"
        depends on PPC_MPC52xx
        select SERIAL_CORE
-       select FW_LOADER
        help
          This drivers support the MPC52xx PSC serial ports. If you would
          like to use them, you must answer Y or M to this option. Not that
@@ -938,4 +941,23 @@ config SERIAL_SGI_IOC3
          If you have an SGI Altix with an IOC3 serial card,
          say Y or M.  Otherwise, say N.
 
+config SERIAL_NETX
+       bool "NetX serial port support"
+       depends on ARM && ARCH_NETX
+       select SERIAL_CORE
+       help
+         If you have a machine based on a Hilscher NetX SoC you
+         can enable its onboard serial port by enabling this option.
+
+          To compile this driver as a module, choose M here: the
+          module will be called netx-serial.
+
+config SERIAL_NETX_CONSOLE
+       bool "Console on NetX serial port"
+       depends on SERIAL_NETX
+       select SERIAL_CORE_CONSOLE
+       help
+         If you have enabled the serial port on the Motorola IMX
+         CPU you can make it the console by answering Y to this option.
+
 endmenu