# The new 8250/16550 serial drivers
config SERIAL_8250
tristate "8250/16550 and compatible serial support"
+ depends on (BROKEN || !SPARC64)
select SERIAL_CORE
---help---
This selects whether you want to include the driver for the standard
If unsure, say N.
-config SERIAL_8250_HCDP
- bool "Console device discovery via EFI HCDP table"
- depends on IA64
- depends on SERIAL_8250_CONSOLE=y
- ---help---
- If you wish to make the serial console port described by the EFI
- HCDP table available for use as serial console, say Y here. See
- <http://www.dig64.org/specifications/DIG64_HCDPv10a_01.pdf>.
-
config SERIAL_8250_CS
tristate "8250/16550 PCMCIA device support"
depends on PCMCIA && SERIAL_8250
depends on V850E_UART
select SERIAL_CORE_CONSOLE
-config SERIAL98
- tristate "PC-9800 8251-based primary serial port support"
- depends on X86_PC9800
- select SERIAL_CORE
- help
- If you want to use standard primary serial ports on PC-9800,
- say Y. Otherwise, say N.
-
-config SERIAL98_CONSOLE
- bool "Support for console on PC-9800 standard serial port"
- depends on SERIAL98=y
- select SERIAL_CORE_CONSOLE
-
config SERIAL_SH_SCI
tristate "SH SCI(F) serial port support"
depends on SUPERH || H8300
on your PowerMac as the console, you can do so by answering
Y to this option.
-endmenu
+config SERIAL_LH7A40X
+ tristate "Sharp LH7A40X embedded UART support"
+ depends on ARM && ARCH_LH7A40X
+ select SERIAL_CORE
+ help
+ This enables support for the three on-board UARTs of the
+ Sharp LH7A40X series CPUs. Choose Y or M.
+config SERIAL_LH7A40X_CONSOLE
+ bool "Support for connsole on Sharp LH7A40X serial port"
+ depends on SERIAL_LH7A40X=y
+ select SERIAL_CORE_CONSOLE
+ help
+ Say Y here if you wish to use one of the serial ports as the
+ system console--the system console is the device which
+ receives all kernel messages and warnings and which allows
+ logins in single user mode.
+
+ Even if you say Y here, the currently visible framebuffer console
+ (/dev/tty0) will still be used as the default system console, but
+ you can alter that using a kernel command line, for example
+ "console=ttyAM1".
+
+config SERIAL_CPM
+ tristate "CPM SCC/SMC serial port support"
+ depends on CPM2 || 8xx
+ select SERIAL_CORE
+ help
+ This driver supports the SCC and SMC serial ports on Motorola
+ embedded PowerPC that contain a CPM1 (8xx) or CPM2 (8xxx)
+
+config SERIAL_CPM_CONSOLE
+ bool "Support for console on CPM SCC/SMC serial port"
+ depends on SERIAL_CPM=y
+ select SERIAL_CORE_CONSOLE
+ help
+ Say Y here if you wish to use a SCC or SMC CPM UART as the system
+ console (the system console is the device which receives all kernel
+ messages and warnings and which allows logins in single user mode).
+
+ Even if you say Y here, the currently visible framebuffer console
+ (/dev/tty0) will still be used as the system console by default, but
+ you can alter that using a kernel command line option such as
+ "console=ttyCPM0". (Try "man bootparam" or see the documentation of
+ your boot loader (lilo or loadlin) about how to pass options to the
+ kernel at boot time.)
+
+config SERIAL_CPM_SCC1
+ bool "Support for SCC1 serial port"
+ depends on SERIAL_CPM=y
+ help
+ Select the is option to use SCC1 as a serial port
+
+config SERIAL_CPM_SCC2
+ bool "Support for SCC2 serial port"
+ depends on SERIAL_CPM=y
+ help
+ Select the is option to use SCC2 as a serial port
+
+config SERIAL_CPM_SCC3
+ bool "Support for SCC3 serial port"
+ depends on SERIAL_CPM=y
+ help
+ Select the is option to use SCC3 as a serial port
+
+config SERIAL_CPM_SCC4
+ bool "Support for SCC4 serial port"
+ depends on SERIAL_CPM=y
+ help
+ Select the is option to use SCC4 as a serial port
+
+config SERIAL_CPM_SMC1
+ bool "Support for SMC1 serial port"
+ depends on SERIAL_CPM=y
+ help
+ Select the is option to use SMC1 as a serial port
+
+config SERIAL_CPM_SMC2
+ bool "Support for SMC2 serial port"
+ depends on SERIAL_CPM=y
+ help
+ Select the is option to use SMC2 as a serial port
+
+config SERIAL_SGI_L1_CONSOLE
+ bool "SGI Altix L1 serial console support"
+ depends on IA64_GENERIC || IA64_SGI_SN2
+ select SERIAL_CORE
+ help
+ If you have an SGI Altix and you would like to use the system
+ controller serial port as your console (you want this!),
+ say Y. Otherwise, say N.
+
+config SERIAL_MPC52xx
+ tristate "Freescale MPC52xx family PSC serial support"
+ depends on PPC_MPC52xx
+ select SERIAL_CORE
+ help
+ This drivers support the MPC52xx PSC serial ports. If you would
+ like to use them, you must answer Y or M to this option. Not that
+ for use as console, it must be included in kernel and not as a
+ module.
+
+config SERIAL_MPC52xx_CONSOLE
+ bool "Console on a Freescale MPC52xx family PSC serial port"
+ depends on SERIAL_MPC52xx=y
+ select SERIAL_CORE_CONSOLE
+ help
+ Select this options if you'd like to use one of the PSC serial port
+ of the Freescale MPC52xx family as a console.
+
+config SERIAL_MPC52xx_CONSOLE_BAUD
+ int "Freescale MPC52xx family PSC serial port baud"
+ depends on SERIAL_MPC52xx_CONSOLE=y
+ default "9600"
+ help
+ Select the MPC52xx console baud rate.
+ This value is only used if the bootloader doesn't pass in the
+ console baudrate
+
+endmenu
git://git.onelab.eu / linux-2.6.git / blobdiff