#include <asm/io.h>
#include <asm/irq.h>
#include <asm/hardware/amba.h>
+#include <asm/hardware/clock.h>
#if defined(CONFIG_SERIAL_AMBA_PL011_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
#define SUPPORT_SYSRQ
*/
struct uart_amba_port {
struct uart_port port;
+ struct clk *clk;
unsigned int im; /* interrupt mask */
unsigned int old_status;
};
unsigned int cr;
int retval;
+ /*
+ * Try to enable the clock producer.
+ */
+ retval = clk_enable(uap->clk);
+ if (retval)
+ goto out;
+
+ uap->port.uartclk = clk_get_rate(uap->clk);
+
/*
* Allocate the IRQ
*/
retval = request_irq(uap->port.irq, pl011_int, 0, "uart-pl011", uap);
if (retval)
- goto out;
+ goto clk_dis;
writew(UART011_IFLS_RX4_8|UART011_IFLS_TX4_8,
uap->port.membase + UART011_IFLS);
return 0;
+ clk_dis:
+ clk_disable(uap->clk);
out:
return retval;
}
val = readw(uap->port.membase + UART011_LCRH);
val &= ~(UART01x_LCRH_BRK | UART01x_LCRH_FEN);
writew(val, uap->port.membase + UART011_LCRH);
+
+ /*
+ * Shut down the clock producer
+ */
+ clk_disable(uap->clk);
}
static void
#ifdef CONFIG_SERIAL_AMBA_PL011_CONSOLE
static inline void
-pl011_console_write_char(struct uart_port *port, char ch)
+pl011_console_write_char(struct uart_amba_port *uap, char ch)
{
unsigned int status;
do {
- status = readw(port->membase + UART01x_FR);
+ status = readw(uap->port.membase + UART01x_FR);
} while (status & UART01x_FR_TXFF);
- writew(ch, port->membase + UART01x_DR);
+ writew(ch, uap->port.membase + UART01x_DR);
}
static void
pl011_console_write(struct console *co, const char *s, unsigned int count)
{
- struct uart_port *port = &amba_ports[co->index]->port;
+ struct uart_amba_port *uap = amba_ports[co->index];
unsigned int status, old_cr, new_cr;
int i;
+ clk_enable(uap->clk);
+
/*
* First save the CR then disable the interrupts
*/
- old_cr = readw(port->membase + UART011_CR);
+ old_cr = readw(uap->port.membase + UART011_CR);
new_cr = old_cr & ~UART011_CR_CTSEN;
new_cr |= UART01x_CR_UARTEN | UART011_CR_TXE;
- writew(new_cr, port->membase + UART011_CR);
+ writew(new_cr, uap->port.membase + UART011_CR);
/*
* Now, do each character
*/
for (i = 0; i < count; i++) {
- pl011_console_write_char(port, s[i]);
+ pl011_console_write_char(uap, s[i]);
if (s[i] == '\n')
- pl011_console_write_char(port, '\r');
+ pl011_console_write_char(uap, '\r');
}
/*
* and restore the TCR
*/
do {
- status = readw(port->membase + UART01x_FR);
+ status = readw(uap->port.membase + UART01x_FR);
} while (status & UART01x_FR_BUSY);
- writew(old_cr, port->membase + UART011_CR);
+ writew(old_cr, uap->port.membase + UART011_CR);
+
+ clk_disable(uap->clk);
}
static void __init
-pl011_console_get_options(struct uart_port *port, int *baud,
+pl011_console_get_options(struct uart_amba_port *uap, int *baud,
int *parity, int *bits)
{
- if (readw(port->membase + UART011_CR) & UART01x_CR_UARTEN) {
+ if (readw(uap->port.membase + UART011_CR) & UART01x_CR_UARTEN) {
unsigned int lcr_h, ibrd, fbrd;
- lcr_h = readw(port->membase + UART011_LCRH);
+ lcr_h = readw(uap->port.membase + UART011_LCRH);
*parity = 'n';
if (lcr_h & UART01x_LCRH_PEN) {
else
*bits = 8;
- ibrd = readw(port->membase + UART011_IBRD);
- fbrd = readw(port->membase + UART011_FBRD);
+ ibrd = readw(uap->port.membase + UART011_IBRD);
+ fbrd = readw(uap->port.membase + UART011_FBRD);
- *baud = port->uartclk * 4 / (64 * ibrd + fbrd);
+ *baud = uap->port.uartclk * 4 / (64 * ibrd + fbrd);
}
}
co->index = 0;
uap = amba_ports[co->index];
+ uap->port.uartclk = clk_get_rate(uap->clk);
+
if (options)
uart_parse_options(options, &baud, &parity, &bits, &flow);
else
- pl011_console_get_options(&uap->port, &baud, &parity, &bits);
+ pl011_console_get_options(uap, &baud, &parity, &bits);
return uart_set_options(&uap->port, co, baud, parity, bits, flow);
}
}
memset(uap, 0, sizeof(struct uart_amba_port));
+ uap->clk = clk_get(&dev->dev, "UARTCLK");
+ if (IS_ERR(uap->clk)) {
+ ret = PTR_ERR(uap->clk);
+ goto unmap;
+ }
+
+ ret = clk_use(uap->clk);
+ if (ret)
+ goto putclk;
+
uap->port.dev = &dev->dev;
uap->port.mapbase = dev->res.start;
uap->port.membase = base;
uap->port.iotype = UPIO_MEM;
uap->port.irq = dev->irq[0];
-#if 0 /* FIXME */
- uap->port.uartclk = 14745600;
-#else
- uap->port.uartclk = 24000000;
-#endif
uap->port.fifosize = 16;
uap->port.ops = &amba_pl011_pops;
uap->port.flags = UPF_BOOT_AUTOCONF;
if (ret) {
amba_set_drvdata(dev, NULL);
amba_ports[i] = NULL;
+ clk_unuse(uap->clk);
+ putclk:
+ clk_put(uap->clk);
+ unmap:
iounmap(base);
free:
kfree(uap);
amba_ports[i] = NULL;
iounmap(uap->port.membase);
+ clk_unuse(uap->clk);
+ clk_put(uap->clk);
kfree(uap);
return 0;
}