*
* Copyright (C) 2004 Freescale Semiconductor, Inc.
* (C) 2004 Intracom, S.A.
- * (C) 2005 MontaVista Software, Inc. by Vitaly Bordug <vbordug@ru.mvista.com>
+ * (C) 2005-2006 MontaVista Software, Inc.
+ * Vitaly Bordug <vbordug@ru.mvista.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
*
*/
-#include <linux/config.h>
#include <linux/module.h>
#include <linux/tty.h>
#include <linux/ioport.h>
#include <linux/device.h>
#include <linux/bootmem.h>
#include <linux/dma-mapping.h>
+#include <linux/fs_uart_pd.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/delay.h>
+#include <asm/fs_pd.h>
#if defined(CONFIG_SERIAL_CPM_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
#define SUPPORT_SYSRQ
/* Track which ports are configured as uarts */
int cpm_uart_port_map[UART_NR];
/* How many ports did we config as uarts */
-int cpm_uart_nr;
+int cpm_uart_nr = 0;
/**************************************************************/
/**************************************************************/
-static inline unsigned long cpu2cpm_addr(void *addr)
+
+/* Place-holder for board-specific stuff */
+struct platform_device* __attribute__ ((weak)) __init
+early_uart_get_pdev(int index)
+{
+ return NULL;
+}
+
+
+static void cpm_uart_count(void)
{
- if ((unsigned long)addr >= CPM_ADDR)
- return (unsigned long)addr;
- return virt_to_bus(addr);
+ cpm_uart_nr = 0;
+#ifdef CONFIG_SERIAL_CPM_SMC1
+ cpm_uart_port_map[cpm_uart_nr++] = UART_SMC1;
+#endif
+#ifdef CONFIG_SERIAL_CPM_SMC2
+ cpm_uart_port_map[cpm_uart_nr++] = UART_SMC2;
+#endif
+#ifdef CONFIG_SERIAL_CPM_SCC1
+ cpm_uart_port_map[cpm_uart_nr++] = UART_SCC1;
+#endif
+#ifdef CONFIG_SERIAL_CPM_SCC2
+ cpm_uart_port_map[cpm_uart_nr++] = UART_SCC2;
+#endif
+#ifdef CONFIG_SERIAL_CPM_SCC3
+ cpm_uart_port_map[cpm_uart_nr++] = UART_SCC3;
+#endif
+#ifdef CONFIG_SERIAL_CPM_SCC4
+ cpm_uart_port_map[cpm_uart_nr++] = UART_SCC4;
+#endif
}
-static inline void *cpm2cpu_addr(unsigned long addr)
+/* Get UART number by its id */
+static int cpm_uart_id2nr(int id)
{
- if (addr >= CPM_ADDR)
- return (void *)addr;
- return bus_to_virt(addr);
+ int i;
+ if (id < UART_NR) {
+ for (i=0; i<UART_NR; i++) {
+ if (cpm_uart_port_map[i] == id)
+ return i;
+ }
+ }
+
+ /* not found or invalid argument */
+ return -1;
}
/*
if (cpm_uart_tx_pump(port) != 0) {
if (IS_SMC(pinfo)) {
smcp->smc_smcm |= SMCM_TX;
- smcp->smc_smcmr |= SMCMR_TEN;
} else {
sccp->scc_sccm |= UART_SCCM_TX;
- pinfo->sccp->scc_gsmrl |= SCC_GSMRL_ENT;
}
}
}
/*
* Transmit characters, refill buffer descriptor, if possible
*/
-static void cpm_uart_int_tx(struct uart_port *port, struct pt_regs *regs)
+static void cpm_uart_int_tx(struct uart_port *port)
{
pr_debug("CPM uart[%d]:TX INT\n", port->line);
/*
* Receive characters
*/
-static void cpm_uart_int_rx(struct uart_port *port, struct pt_regs *regs)
+static void cpm_uart_int_rx(struct uart_port *port)
{
int i;
unsigned char ch, *cp;
}
/* get pointer */
- cp = cpm2cpu_addr(bdp->cbd_bufaddr);
+ cp = cpm2cpu_addr(bdp->cbd_bufaddr, pinfo);
/* loop through the buffer */
while (i-- > 0) {
if (status &
(BD_SC_BR | BD_SC_FR | BD_SC_PR | BD_SC_OV))
goto handle_error;
- if (uart_handle_sysrq_char(port, ch, regs))
+ if (uart_handle_sysrq_char(port, ch))
continue;
error_return:
/*
* Asynchron mode interrupt handler
*/
-static irqreturn_t cpm_uart_int(int irq, void *data, struct pt_regs *regs)
+static irqreturn_t cpm_uart_int(int irq, void *data)
{
u8 events;
struct uart_port *port = (struct uart_port *)data;
if (events & SMCM_BRKE)
uart_handle_break(port);
if (events & SMCM_RX)
- cpm_uart_int_rx(port, regs);
+ cpm_uart_int_rx(port);
if (events & SMCM_TX)
- cpm_uart_int_tx(port, regs);
+ cpm_uart_int_tx(port);
} else {
events = sccp->scc_scce;
sccp->scc_scce = events;
if (events & UART_SCCM_BRKE)
uart_handle_break(port);
if (events & UART_SCCM_RX)
- cpm_uart_int_rx(port, regs);
+ cpm_uart_int_rx(port);
if (events & UART_SCCM_TX)
- cpm_uart_int_tx(port, regs);
+ cpm_uart_int_tx(port);
}
return (events) ? IRQ_HANDLED : IRQ_NONE;
}
/* Startup rx-int */
if (IS_SMC(pinfo)) {
pinfo->smcp->smc_smcm |= SMCM_RX;
- pinfo->smcp->smc_smcmr |= SMCMR_REN;
+ pinfo->smcp->smc_smcmr |= (SMCMR_REN | SMCMR_TEN);
} else {
pinfo->sccp->scc_sccm |= UART_SCCM_RX;
+ pinfo->sccp->scc_gsmrl |= (SCC_GSMRL_ENR | SCC_GSMRL_ENT);
}
if (!(pinfo->flags & FLAG_CONSOLE))
}
/* Shut them really down and reinit buffer descriptors */
- cpm_line_cr_cmd(line, CPM_CR_STOP_TX);
+ if (IS_SMC(pinfo))
+ cpm_line_cr_cmd(line, CPM_CR_STOP_TX);
+ else
+ cpm_line_cr_cmd(line, CPM_CR_GRA_STOP_TX);
+
cpm_uart_initbd(pinfo);
}
}
/* Pick next descriptor and fill from buffer */
bdp = pinfo->tx_cur;
- p = cpm2cpu_addr(bdp->cbd_bufaddr);
+ p = cpm2cpu_addr(bdp->cbd_bufaddr, pinfo);
*p++ = port->x_char;
bdp->cbd_datlen = 1;
while (!(bdp->cbd_sc & BD_SC_READY) && (xmit->tail != xmit->head)) {
count = 0;
- p = cpm2cpu_addr(bdp->cbd_bufaddr);
+ p = cpm2cpu_addr(bdp->cbd_bufaddr, pinfo);
while (count < pinfo->tx_fifosize) {
*p++ = xmit->buf[xmit->tail];
xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
mem_addr = pinfo->mem_addr;
bdp = pinfo->rx_cur = pinfo->rx_bd_base;
for (i = 0; i < (pinfo->rx_nrfifos - 1); i++, bdp++) {
- bdp->cbd_bufaddr = cpu2cpm_addr(mem_addr);
+ bdp->cbd_bufaddr = cpu2cpm_addr(mem_addr, pinfo);
bdp->cbd_sc = BD_SC_EMPTY | BD_SC_INTRPT;
mem_addr += pinfo->rx_fifosize;
}
- bdp->cbd_bufaddr = cpu2cpm_addr(mem_addr);
+ bdp->cbd_bufaddr = cpu2cpm_addr(mem_addr, pinfo);
bdp->cbd_sc = BD_SC_WRAP | BD_SC_EMPTY | BD_SC_INTRPT;
/* Set the physical address of the host memory
mem_addr = pinfo->mem_addr + L1_CACHE_ALIGN(pinfo->rx_nrfifos * pinfo->rx_fifosize);
bdp = pinfo->tx_cur = pinfo->tx_bd_base;
for (i = 0; i < (pinfo->tx_nrfifos - 1); i++, bdp++) {
- bdp->cbd_bufaddr = cpu2cpm_addr(mem_addr);
+ bdp->cbd_bufaddr = cpu2cpm_addr(mem_addr, pinfo);
bdp->cbd_sc = BD_SC_INTRPT;
mem_addr += pinfo->tx_fifosize;
}
- bdp->cbd_bufaddr = cpu2cpm_addr(mem_addr);
+ bdp->cbd_bufaddr = cpu2cpm_addr(mem_addr, pinfo);
bdp->cbd_sc = BD_SC_WRAP | BD_SC_INTRPT;
}
if (pinfo->flags & FLAG_CONSOLE)
return 0;
- /*
- * Setup any port IO, connect any baud rate generators,
- * etc. This is expected to be handled by board
- * dependant code
- */
- if (pinfo->set_lineif)
- pinfo->set_lineif(pinfo);
-
if (IS_SMC(pinfo)) {
pinfo->smcp->smc_smcm &= ~(SMCM_RX | SMCM_TX);
pinfo->smcp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
},
};
+int cpm_uart_drv_get_platform_data(struct platform_device *pdev, int is_con)
+{
+ struct resource *r;
+ struct fs_uart_platform_info *pdata = pdev->dev.platform_data;
+ int idx; /* It is UART_SMCx or UART_SCCx index */
+ struct uart_cpm_port *pinfo;
+ int line;
+ u32 mem, pram;
+
+ idx = pdata->fs_no = fs_uart_get_id(pdata);
+
+ line = cpm_uart_id2nr(idx);
+ if(line < 0) {
+ printk(KERN_ERR"%s(): port %d is not registered", __FUNCTION__, idx);
+ return -EINVAL;
+ }
+
+ pinfo = (struct uart_cpm_port *) &cpm_uart_ports[idx];
+
+ pinfo->brg = pdata->brg;
+
+ if (!is_con) {
+ pinfo->port.line = line;
+ pinfo->port.flags = UPF_BOOT_AUTOCONF;
+ }
+
+ if (!(r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "regs")))
+ return -EINVAL;
+ mem = (u32)ioremap(r->start, r->end - r->start + 1);
+
+ if (!(r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pram")))
+ return -EINVAL;
+ pram = (u32)ioremap(r->start, r->end - r->start + 1);
+
+ if(idx > fsid_smc2_uart) {
+ pinfo->sccp = (scc_t *)mem;
+ pinfo->sccup = (scc_uart_t *)pram;
+ } else {
+ pinfo->smcp = (smc_t *)mem;
+ pinfo->smcup = (smc_uart_t *)pram;
+ }
+ pinfo->tx_nrfifos = pdata->tx_num_fifo;
+ pinfo->tx_fifosize = pdata->tx_buf_size;
+
+ pinfo->rx_nrfifos = pdata->rx_num_fifo;
+ pinfo->rx_fifosize = pdata->rx_buf_size;
+
+ pinfo->port.uartclk = pdata->uart_clk;
+ pinfo->port.mapbase = (unsigned long)mem;
+ pinfo->port.irq = platform_get_irq(pdev, 0);
+
+ return 0;
+}
+
#ifdef CONFIG_SERIAL_CPM_CONSOLE
/*
* Print a string to the serial port trying not to disturb
* If the buffer address is in the CPM DPRAM, don't
* convert it.
*/
- cp = cpm2cpu_addr(bdp->cbd_bufaddr);
+ cp = cpm2cpu_addr(bdp->cbd_bufaddr, pinfo);
*cp = *s;
while ((bdp->cbd_sc & BD_SC_READY) != 0)
;
- cp = cpm2cpu_addr(bdp->cbd_bufaddr);
+ cp = cpm2cpu_addr(bdp->cbd_bufaddr, pinfo);
*cp = 13;
bdp->cbd_datlen = 1;
pinfo->tx_cur = (volatile cbd_t *) bdp;
}
-/*
- * Setup console. Be careful is called early !
- */
+
static int __init cpm_uart_console_setup(struct console *co, char *options)
{
struct uart_port *port;
int flow = 'n';
int ret;
+ struct fs_uart_platform_info *pdata;
+ struct platform_device* pdev = early_uart_get_pdev(co->index);
+
+ if (!pdev) {
+ pr_info("cpm_uart: console: compat mode\n");
+ /* compatibility - will be cleaned up */
+ cpm_uart_init_portdesc();
+ }
+
port =
(struct uart_port *)&cpm_uart_ports[cpm_uart_port_map[co->index]];
pinfo = (struct uart_cpm_port *)port;
+ if (!pdev) {
+ if (pinfo->set_lineif)
+ pinfo->set_lineif(pinfo);
+ } else {
+ pdata = pdev->dev.platform_data;
+ if (pdata)
+ if (pdata->init_ioports)
+ pdata->init_ioports(pdata);
+
+ cpm_uart_drv_get_platform_data(pdev, 1);
+ }
pinfo->flags |= FLAG_CONSOLE;
if (options) {
uart_parse_options(options, &baud, &parity, &bits, &flow);
} else {
- bd_t *bd = (bd_t *) __res;
-
- if (bd->bi_baudrate)
- baud = bd->bi_baudrate;
- else
+ if ((baud = uart_baudrate()) == -1)
baud = 9600;
}
- /*
- * Setup any port IO, connect any baud rate generators,
- * etc. This is expected to be handled by board
- * dependant code
- */
- if (pinfo->set_lineif)
- pinfo->set_lineif(pinfo);
-
if (IS_SMC(pinfo)) {
pinfo->smcp->smc_smcm &= ~(SMCM_RX | SMCM_TX);
pinfo->smcp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
int __init cpm_uart_console_init(void)
{
- int ret = cpm_uart_init_portdesc();
-
- if (!ret)
- register_console(&cpm_scc_uart_console);
- return ret;
+ register_console(&cpm_scc_uart_console);
+ return 0;
}
console_initcall(cpm_uart_console_init);
.minor = SERIAL_CPM_MINOR,
.cons = CPM_UART_CONSOLE,
};
-
-static int __init cpm_uart_init(void)
+static int cpm_uart_drv_probe(struct device *dev)
{
- int ret, i;
+ struct platform_device *pdev = to_platform_device(dev);
+ struct fs_uart_platform_info *pdata;
+ int ret = -ENODEV;
- printk(KERN_INFO "Serial: CPM driver $Revision: 0.01 $\n");
-
-#ifndef CONFIG_SERIAL_CPM_CONSOLE
- ret = cpm_uart_init_portdesc();
- if (ret)
+ if(!pdev) {
+ printk(KERN_ERR"CPM UART: platform data missing!\n");
return ret;
-#endif
+ }
- cpm_reg.nr = cpm_uart_nr;
- ret = uart_register_driver(&cpm_reg);
+ pdata = pdev->dev.platform_data;
- if (ret)
+ if ((ret = cpm_uart_drv_get_platform_data(pdev, 0)))
return ret;
- for (i = 0; i < cpm_uart_nr; i++) {
- int con = cpm_uart_port_map[i];
- cpm_uart_ports[con].port.line = i;
- cpm_uart_ports[con].port.flags = UPF_BOOT_AUTOCONF;
- uart_add_one_port(&cpm_reg, &cpm_uart_ports[con].port);
- }
+ pr_debug("cpm_uart_drv_probe: Adding CPM UART %d\n", cpm_uart_id2nr(pdata->fs_no));
- return ret;
+ if (pdata->init_ioports)
+ pdata->init_ioports(pdata);
+
+ ret = uart_add_one_port(&cpm_reg, &cpm_uart_ports[pdata->fs_no].port);
+
+ return ret;
}
-static void __exit cpm_uart_exit(void)
+static int cpm_uart_drv_remove(struct device *dev)
{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct fs_uart_platform_info *pdata = pdev->dev.platform_data;
+
+ pr_debug("cpm_uart_drv_remove: Removing CPM UART %d\n",
+ cpm_uart_id2nr(pdata->fs_no));
+
+ uart_remove_one_port(&cpm_reg, &cpm_uart_ports[pdata->fs_no].port);
+ return 0;
+}
+
+static struct device_driver cpm_smc_uart_driver = {
+ .name = "fsl-cpm-smc:uart",
+ .bus = &platform_bus_type,
+ .probe = cpm_uart_drv_probe,
+ .remove = cpm_uart_drv_remove,
+};
+
+static struct device_driver cpm_scc_uart_driver = {
+ .name = "fsl-cpm-scc:uart",
+ .bus = &platform_bus_type,
+ .probe = cpm_uart_drv_probe,
+ .remove = cpm_uart_drv_remove,
+};
+
+/*
+ This is supposed to match uart devices on platform bus,
+ */
+static int match_is_uart (struct device* dev, void* data)
+{
+ struct platform_device* pdev = container_of(dev, struct platform_device, dev);
+ int ret = 0;
+ /* this was setfunc as uart */
+ if(strstr(pdev->name,":uart")) {
+ ret = 1;
+ }
+ return ret;
+}
+
+
+static int cpm_uart_init(void) {
+
+ int ret;
int i;
+ struct device *dev;
+ printk(KERN_INFO "Serial: CPM driver $Revision: 0.02 $\n");
+
+ /* lookup the bus for uart devices */
+ dev = bus_find_device(&platform_bus_type, NULL, 0, match_is_uart);
+
+ /* There are devices on the bus - all should be OK */
+ if (dev) {
+ cpm_uart_count();
+ cpm_reg.nr = cpm_uart_nr;
+
+ if (!(ret = uart_register_driver(&cpm_reg))) {
+ if ((ret = driver_register(&cpm_smc_uart_driver))) {
+ uart_unregister_driver(&cpm_reg);
+ return ret;
+ }
+ if ((ret = driver_register(&cpm_scc_uart_driver))) {
+ driver_unregister(&cpm_scc_uart_driver);
+ uart_unregister_driver(&cpm_reg);
+ }
+ }
+ } else {
+ /* No capable platform devices found - falling back to legacy mode */
+ pr_info("cpm_uart: WARNING: no UART devices found on platform bus!\n");
+ pr_info(
+ "cpm_uart: the driver will guess configuration, but this mode is no longer supported.\n");
+
+ /* Don't run this again, if the console driver did it already */
+ if (cpm_uart_nr == 0)
+ cpm_uart_init_portdesc();
+
+ cpm_reg.nr = cpm_uart_nr;
+ ret = uart_register_driver(&cpm_reg);
+
+ if (ret)
+ return ret;
+
+ for (i = 0; i < cpm_uart_nr; i++) {
+ int con = cpm_uart_port_map[i];
+ cpm_uart_ports[con].port.line = i;
+ cpm_uart_ports[con].port.flags = UPF_BOOT_AUTOCONF;
+ if (cpm_uart_ports[con].set_lineif)
+ cpm_uart_ports[con].set_lineif(&cpm_uart_ports[con]);
+ uart_add_one_port(&cpm_reg, &cpm_uart_ports[con].port);
+ }
- for (i = 0; i < cpm_uart_nr; i++) {
- int con = cpm_uart_port_map[i];
- uart_remove_one_port(&cpm_reg, &cpm_uart_ports[con].port);
}
+ return ret;
+}
+static void __exit cpm_uart_exit(void)
+{
+ driver_unregister(&cpm_scc_uart_driver);
+ driver_unregister(&cpm_smc_uart_driver);
uart_unregister_driver(&cpm_reg);
}
git://git.onelab.eu / linux-2.6.git / blobdiff