fedora core 6 1.2949 + vserver 2.2.0

[linux-2.6.git] / drivers / serial / crisv10.c

diff --git a/drivers/serial/crisv10.c b/drivers/serial/crisv10.c
index be12623..42b050c 100644 (file)
--- a/drivers/serial/crisv10.c
+++ b/drivers/serial/crisv10.c
@@ -415,7 +415,7 @@
  * Fixed DEF_TX value that caused the serial transmitter pin (txd) to go to 0 when
  * closing the last filehandle, NASTY!.
  * Added break generation, not tested though!
- * Use SA_SHIRQ when request_irq() for ser2 and ser3 (shared with) par0 and par1.
+ * Use IRQF_SHARED when request_irq() for ser2 and ser3 (shared with) par0 and par1.
  * You can't use them at the same time (yet..), but you can hopefully switch
  * between ser2/par0, ser3/par1 with the same kernel config.
  * Replaced some magic constants with defines
@@ -425,7 +425,6 @@
 
 static char *serial_version = "$Revision: 1.25 $";
 
-#include <linux/config.h>
 #include <linux/types.h>
 #include <linux/errno.h>
 #include <linux/signal.h>
@@ -481,8 +480,6 @@ static char *serial_version = "$Revision: 1.25 $";
 #include "serial_compat.h"
 #endif
 
-#define _INLINE_ inline
-
 struct tty_driver *serial_driver;
 
 /* serial subtype definitions */
@@ -591,8 +588,6 @@ static void rs_throttle(struct tty_struct * tty);
 static void rs_wait_until_sent(struct tty_struct *tty, int timeout);
 static int rs_write(struct tty_struct * tty, int from_user,
                     const unsigned char *buf, int count);
-extern _INLINE_ int rs_raw_write(struct tty_struct * tty, int from_user,
-                            const unsigned char *buf, int count);
 #ifdef CONFIG_ETRAX_RS485
 static int e100_write_rs485(struct tty_struct * tty, int from_user,
                             const unsigned char *buf, int count);
@@ -809,8 +804,8 @@ static struct e100_serial rs_table[] = {
 
 #define NR_PORTS (sizeof(rs_table)/sizeof(struct e100_serial))
 
-static struct termios *serial_termios[NR_PORTS];
-static struct termios *serial_termios_locked[NR_PORTS];
+static struct ktermios *serial_termios[NR_PORTS];
+static struct ktermios *serial_termios_locked[NR_PORTS];
 #ifdef CONFIG_ETRAX_SERIAL_FAST_TIMER
 static struct fast_timer fast_timers[NR_PORTS];
 #endif
@@ -1538,8 +1533,7 @@ e100_enable_rxdma_irq(struct e100_serial *info)
 
 /* the tx DMA uses only dma_descr interrupt */
 
-static _INLINE_ void
-e100_disable_txdma_irq(struct e100_serial *info)
+static void e100_disable_txdma_irq(struct e100_serial *info)
 {
 #ifdef SERIAL_DEBUG_INTR
        printk("txdma_irq(%d): 0\n",info->line);
@@ -1548,8 +1542,7 @@ e100_disable_txdma_irq(struct e100_serial *info)
        *R_IRQ_MASK2_CLR = info->irq;
 }
 
-static _INLINE_ void
-e100_enable_txdma_irq(struct e100_serial *info)
+static void e100_enable_txdma_irq(struct e100_serial *info)
 {
 #ifdef SERIAL_DEBUG_INTR
        printk("txdma_irq(%d): 1\n",info->line);
@@ -1558,8 +1551,7 @@ e100_enable_txdma_irq(struct e100_serial *info)
        *R_IRQ_MASK2_SET = info->irq;
 }
 
-static _INLINE_ void
-e100_disable_txdma_channel(struct e100_serial *info)
+static void e100_disable_txdma_channel(struct e100_serial *info)
 {
        unsigned long flags;
 
@@ -1599,8 +1591,7 @@ e100_disable_txdma_channel(struct e100_serial *info)
 }
 
 
-static _INLINE_ void
-e100_enable_txdma_channel(struct e100_serial *info)
+static void e100_enable_txdma_channel(struct e100_serial *info)
 {
        unsigned long flags;
 
@@ -1625,8 +1616,7 @@ e100_enable_txdma_channel(struct e100_serial *info)
        restore_flags(flags);
 }
 
-static _INLINE_ void
-e100_disable_rxdma_channel(struct e100_serial *info)
+static void e100_disable_rxdma_channel(struct e100_serial *info)
 {
        unsigned long flags;
 
@@ -1665,8 +1655,7 @@ e100_disable_rxdma_channel(struct e100_serial *info)
 }
 
 
-static _INLINE_ void
-e100_enable_rxdma_channel(struct e100_serial *info)
+static void e100_enable_rxdma_channel(struct e100_serial *info)
 {
        unsigned long flags;
 
@@ -1913,9 +1902,7 @@ rs_start(struct tty_struct *tty)
  * This routine is used by the interrupt handler to schedule
  * processing in the software interrupt portion of the driver.
  */
-static _INLINE_ void
-rs_sched_event(struct e100_serial *info,
-                                   int event)
+static void rs_sched_event(struct e100_serial *info, int event)
 {
        if (info->event & (1 << event))
                return;
@@ -2155,8 +2142,9 @@ add_char_and_flag(struct e100_serial *info, unsigned char data, unsigned char fl
        return 1;
 }
 
-extern _INLINE_ unsigned int
-handle_descr_data(struct e100_serial *info, struct etrax_dma_descr *descr, unsigned int recvl)
+static unsigned int handle_descr_data(struct e100_serial *info,
+                                     struct etrax_dma_descr *descr,
+                                     unsigned int recvl)
 {
        struct etrax_recv_buffer *buffer = phys_to_virt(descr->buf) - sizeof *buffer;
 
@@ -2182,8 +2170,7 @@ handle_descr_data(struct e100_serial *info, struct etrax_dma_descr *descr, unsig
        return recvl;
 }
 
-static _INLINE_ unsigned int
-handle_all_descr_data(struct e100_serial *info)
+static unsigned int handle_all_descr_data(struct e100_serial *info)
 {
        struct etrax_dma_descr *descr;
        unsigned int recvl;
@@ -2230,8 +2217,7 @@ handle_all_descr_data(struct e100_serial *info)
        return ret;
 }
 
-static _INLINE_ void
-receive_chars_dma(struct e100_serial *info)
+static void receive_chars_dma(struct e100_serial *info)
 {
        struct tty_struct *tty;
        unsigned char rstat;
@@ -2292,8 +2278,7 @@ receive_chars_dma(struct e100_serial *info)
        *info->icmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, restart);
 }
 
-static _INLINE_ int
-start_recv_dma(struct e100_serial *info)
+static int start_recv_dma(struct e100_serial *info)
 {
        struct etrax_dma_descr *descr = info->rec_descr;
        struct etrax_recv_buffer *buffer;
@@ -2348,11 +2333,6 @@ start_receive(struct e100_serial *info)
 }
 
 
-static _INLINE_ void
-status_handle(struct e100_serial *info, unsigned short status)
-{
-}
-
 /* the bits in the MASK2 register are laid out like this:
    DMAI_EOP DMAI_DESCR DMAO_EOP DMAO_DESCR
    where I is the input channel and O is the output channel for the port.
@@ -2366,7 +2346,7 @@ status_handle(struct e100_serial *info, unsigned short status)
 */
 
 static irqreturn_t
-tr_interrupt(int irq, void *dev_id, struct pt_regs * regs)
+tr_interrupt(int irq, void *dev_id)
 {
        struct e100_serial *info;
        unsigned long ireg;
@@ -2415,7 +2395,7 @@ tr_interrupt(int irq, void *dev_id, struct pt_regs * regs)
 /* dma input channel interrupt handler */
 
 static irqreturn_t
-rec_interrupt(int irq, void *dev_id, struct pt_regs * regs)
+rec_interrupt(int irq, void *dev_id)
 {
        struct e100_serial *info;
        unsigned long ireg;
@@ -2454,8 +2434,7 @@ rec_interrupt(int irq, void *dev_id, struct pt_regs * regs)
        return IRQ_RETVAL(handled);
 } /* rec_interrupt */
 
-static _INLINE_ int
-force_eop_if_needed(struct e100_serial *info)
+static int force_eop_if_needed(struct e100_serial *info)
 {
        /* We check data_avail bit to determine if data has
         * arrived since last time
@@ -2499,8 +2478,7 @@ force_eop_if_needed(struct e100_serial *info)
        return 1;
 }
 
-extern _INLINE_ void
-flush_to_flip_buffer(struct e100_serial *info)
+static void flush_to_flip_buffer(struct e100_serial *info)
 {
        struct tty_struct *tty;
        struct etrax_recv_buffer *buffer;
@@ -2594,12 +2572,6 @@ flush_to_flip_buffer(struct e100_serial *info)
 
        DFLIP(
          if (1) {
-
-                 if (test_bit(TTY_DONT_FLIP, &tty->flags)) {
-                         DEBUG_LOG(info->line, "*** TTY_DONT_FLIP set flip.count %i ***\n", tty->flip.count);
-                         DEBUG_LOG(info->line, "*** recv_cnt %i\n", info->recv_cnt);
-                 } else {
-                 }
                  DEBUG_LOG(info->line, "*** rxtot %i\n", info->icount.rx);
                  DEBUG_LOG(info->line, "ldisc %lu\n", tty->ldisc.chars_in_buffer(tty));
                  DEBUG_LOG(info->line, "room  %lu\n", tty->ldisc.receive_room(tty));
@@ -2611,8 +2583,7 @@ flush_to_flip_buffer(struct e100_serial *info)
        tty_flip_buffer_push(tty);
 }
 
-static _INLINE_ void
-check_flush_timeout(struct e100_serial *info)
+static void check_flush_timeout(struct e100_serial *info)
 {
        /* Flip what we've got (if we can) */
        flush_to_flip_buffer(info);
@@ -2741,7 +2712,7 @@ TODO: The break will be delayed until an F or V character is received.
 
 */
 
-extern _INLINE_
+static
 struct e100_serial * handle_ser_rx_interrupt_no_dma(struct e100_serial *info)
 {
        unsigned long data_read;
@@ -2875,8 +2846,7 @@ more_data:
        return info;
 }
 
-extern _INLINE_
-struct e100_serial* handle_ser_rx_interrupt(struct e100_serial *info)
+static struct e100_serial* handle_ser_rx_interrupt(struct e100_serial *info)
 {
        unsigned char rstat;
 
@@ -2995,7 +2965,7 @@ struct e100_serial* handle_ser_rx_interrupt(struct e100_serial *info)
        return info;
 } /* handle_ser_rx_interrupt */
 
-extern _INLINE_ void handle_ser_tx_interrupt(struct e100_serial *info)
+static void handle_ser_tx_interrupt(struct e100_serial *info)
 {
        unsigned long flags;
 
@@ -3084,7 +3054,7 @@ extern _INLINE_ void handle_ser_tx_interrupt(struct e100_serial *info)
  * ser_int duration: just sending: 8-15 us normally, up to 73 us
  */
 static irqreturn_t
-ser_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+ser_interrupt(int irq, void *dev_id)
 {
        static volatile int tx_started = 0;
        struct e100_serial *info;
@@ -3621,9 +3591,8 @@ rs_flush_chars(struct tty_struct *tty)
        restore_flags(flags);
 }
 
-extern _INLINE_ int
-rs_raw_write(struct tty_struct * tty, int from_user,
-         const unsigned char *buf, int count)
+static int rs_raw_write(struct tty_struct * tty, int from_user,
+                       const unsigned char *buf, int count)
 {
        int     c, ret = 0;
        struct e100_serial *info = (struct e100_serial *)tty->driver_data;
@@ -4254,7 +4223,7 @@ rs_ioctl(struct tty_struct *tty, struct file * file,
 }
 
 static void
-rs_set_termios(struct tty_struct *tty, struct termios *old_termios)
+rs_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
 {
        struct e100_serial *info = (struct e100_serial *)tty->driver_data;
 
@@ -4710,7 +4679,7 @@ rs_open(struct tty_struct *tty, struct file * filp)
  * /proc fs routines....
  */
 
-extern _INLINE_ int line_info(char *buf, struct e100_serial *info)
+static int line_info(char *buf, struct e100_serial *info)
 {
        char    stat_buf[30];
        int     ret;
@@ -4856,7 +4825,7 @@ show_serial_version(void)
 
 /* rs_init inits the driver at boot (using the module_init chain) */
 
-static struct tty_operations rs_ops = {
+static const struct tty_operations rs_ops = {
        .open = rs_open,
        .close = rs_close,
        .write = rs_write,
@@ -4908,7 +4877,9 @@ rs_init(void)
        driver->init_termios = tty_std_termios;
        driver->init_termios.c_cflag =
                B115200 | CS8 | CREAD | HUPCL | CLOCAL; /* is normally B9600 default... */
-       driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_NO_DEVFS;
+       driver->init_termios.c_ispeed = 115200;
+       driver->init_termios.c_ospeed = 115200;
+       driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
        driver->termios = serial_termios;
        driver->termios_locked = serial_termios_locked;
 
@@ -4973,55 +4944,55 @@ rs_init(void)
        /* Not needed in simulator.  May only complicate stuff. */
        /* hook the irq's for DMA channel 6 and 7, serial output and input, and some more... */
 
-       if (request_irq(SERIAL_IRQ_NBR, ser_interrupt, SA_SHIRQ | SA_INTERRUPT, "serial ", NULL))
+       if (request_irq(SERIAL_IRQ_NBR, ser_interrupt, IRQF_SHARED | IRQF_DISABLED, "serial ", NULL))
                panic("irq8");
 
 #ifdef CONFIG_ETRAX_SERIAL_PORT0
 #ifdef CONFIG_ETRAX_SERIAL_PORT0_DMA6_OUT
-       if (request_irq(SER0_DMA_TX_IRQ_NBR, tr_interrupt, SA_INTERRUPT, "serial 0 dma tr", NULL))
+       if (request_irq(SER0_DMA_TX_IRQ_NBR, tr_interrupt, IRQF_DISABLED, "serial 0 dma tr", NULL))
                panic("irq22");
 #endif
 #ifdef CONFIG_ETRAX_SERIAL_PORT0_DMA7_IN
-       if (request_irq(SER0_DMA_RX_IRQ_NBR, rec_interrupt, SA_INTERRUPT, "serial 0 dma rec", NULL))
+       if (request_irq(SER0_DMA_RX_IRQ_NBR, rec_interrupt, IRQF_DISABLED, "serial 0 dma rec", NULL))
                panic("irq23");
 #endif
 #endif
 
 #ifdef CONFIG_ETRAX_SERIAL_PORT1
 #ifdef CONFIG_ETRAX_SERIAL_PORT1_DMA8_OUT
-       if (request_irq(SER1_DMA_TX_IRQ_NBR, tr_interrupt, SA_INTERRUPT, "serial 1 dma tr", NULL))
+       if (request_irq(SER1_DMA_TX_IRQ_NBR, tr_interrupt, IRQF_DISABLED, "serial 1 dma tr", NULL))
                panic("irq24");
 #endif
 #ifdef CONFIG_ETRAX_SERIAL_PORT1_DMA9_IN
-       if (request_irq(SER1_DMA_RX_IRQ_NBR, rec_interrupt, SA_INTERRUPT, "serial 1 dma rec", NULL))
+       if (request_irq(SER1_DMA_RX_IRQ_NBR, rec_interrupt, IRQF_DISABLED, "serial 1 dma rec", NULL))
                panic("irq25");
 #endif
 #endif
 #ifdef CONFIG_ETRAX_SERIAL_PORT2
        /* DMA Shared with par0 (and SCSI0 and ATA) */
 #ifdef CONFIG_ETRAX_SERIAL_PORT2_DMA2_OUT
-       if (request_irq(SER2_DMA_TX_IRQ_NBR, tr_interrupt, SA_SHIRQ | SA_INTERRUPT, "serial 2 dma tr", NULL))
+       if (request_irq(SER2_DMA_TX_IRQ_NBR, tr_interrupt, IRQF_SHARED | IRQF_DISABLED, "serial 2 dma tr", NULL))
                panic("irq18");
 #endif
 #ifdef CONFIG_ETRAX_SERIAL_PORT2_DMA3_IN
-       if (request_irq(SER2_DMA_RX_IRQ_NBR, rec_interrupt, SA_SHIRQ | SA_INTERRUPT, "serial 2 dma rec", NULL))
+       if (request_irq(SER2_DMA_RX_IRQ_NBR, rec_interrupt, IRQF_SHARED | IRQF_DISABLED, "serial 2 dma rec", NULL))
                panic("irq19");
 #endif
 #endif
 #ifdef CONFIG_ETRAX_SERIAL_PORT3
        /* DMA Shared with par1 (and SCSI1 and Extern DMA 0) */
 #ifdef CONFIG_ETRAX_SERIAL_PORT3_DMA4_OUT
-       if (request_irq(SER3_DMA_TX_IRQ_NBR, tr_interrupt, SA_SHIRQ | SA_INTERRUPT, "serial 3 dma tr", NULL))
+       if (request_irq(SER3_DMA_TX_IRQ_NBR, tr_interrupt, IRQF_SHARED | IRQF_DISABLED, "serial 3 dma tr", NULL))
                panic("irq20");
 #endif
 #ifdef CONFIG_ETRAX_SERIAL_PORT3_DMA5_IN
-       if (request_irq(SER3_DMA_RX_IRQ_NBR, rec_interrupt, SA_SHIRQ | SA_INTERRUPT, "serial 3 dma rec", NULL))
+       if (request_irq(SER3_DMA_RX_IRQ_NBR, rec_interrupt, IRQF_SHARED | IRQF_DISABLED, "serial 3 dma rec", NULL))
                panic("irq21");
 #endif
 #endif
 
 #ifdef CONFIG_ETRAX_SERIAL_FLUSH_DMA_FAST
-       if (request_irq(TIMER1_IRQ_NBR, timeout_interrupt, SA_SHIRQ | SA_INTERRUPT,
+       if (request_irq(TIMER1_IRQ_NBR, timeout_interrupt, IRQF_SHARED | IRQF_DISABLED,
                       "fast serial dma timeout", NULL)) {
                printk(KERN_CRIT "err: timer1 irq\n");
        }