#include <linux/circ_buf.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
#include <linux/tty.h>
#include <linux/tty_flip.h>
#include <linux/serial_core.h>
serial_out(up, UART_IER, up->ier);
}
-static void serial_pxa_stop_tx(struct uart_port *port, unsigned int tty_stop)
+static void serial_pxa_stop_tx(struct uart_port *port)
{
struct uart_pxa_port *up = (struct uart_pxa_port *)port;
int max_count = 256;
do {
- if (unlikely(tty->flip.count >= TTY_FLIPBUF_SIZE)) {
- if (tty->low_latency)
- tty_flip_buffer_push(tty);
- /*
- * If this failed then we will throw away the
- * bytes but must do so to clear interrupts
- */
- }
ch = serial_in(up, UART_RX);
flag = TTY_NORMAL;
up->port.icount.rx++;
return;
}
if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) {
- serial_pxa_stop_tx(&up->port, 0);
+ serial_pxa_stop_tx(&up->port);
return;
}
if (uart_circ_empty(xmit))
- serial_pxa_stop_tx(&up->port, 0);
+ serial_pxa_stop_tx(&up->port);
}
-static void serial_pxa_start_tx(struct uart_port *port, unsigned int tty_start)
+static void serial_pxa_start_tx(struct uart_port *port)
{
struct uart_pxa_port *up = (struct uart_pxa_port *)port;
static unsigned int serial_pxa_get_mctrl(struct uart_port *port)
{
struct uart_pxa_port *up = (struct uart_pxa_port *)port;
- unsigned long flags;
unsigned char status;
unsigned int ret;
return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
- spin_lock_irqsave(&up->port.lock, flags);
status = serial_in(up, UART_MSR);
- spin_unlock_irqrestore(&up->port.lock, flags);
ret = 0;
if (status & UART_MSR_DCD)
unsigned long flags;
int retval;
- up->mcr = 0;
+ if (port->line == 3) /* HWUART */
+ up->mcr |= UART_MCR_AFE;
+ else
+ up->mcr = 0;
/*
* Allocate the IRQ
switch (termios->c_cflag & CSIZE) {
case CS5:
- cval = 0x00;
+ cval = UART_LCR_WLEN5;
break;
case CS6:
- cval = 0x01;
+ cval = UART_LCR_WLEN6;
break;
case CS7:
- cval = 0x02;
+ cval = UART_LCR_WLEN7;
break;
default:
case CS8:
- cval = 0x03;
+ cval = UART_LCR_WLEN8;
break;
}
if (termios->c_cflag & CSTOPB)
- cval |= 0x04;
+ cval |= UART_LCR_STOP;
if (termios->c_cflag & PARENB)
cval |= UART_LCR_PARITY;
if (!(termios->c_cflag & PARODD))
if ((up->port.uartclk / quot) < (2400 * 16))
fcr = UART_FCR_ENABLE_FIFO | UART_FCR_PXAR1;
- else
+ else if ((up->port.uartclk / quot) < (230400 * 16))
fcr = UART_FCR_ENABLE_FIFO | UART_FCR_PXAR8;
+ else
+ fcr = UART_FCR_ENABLE_FIFO | UART_FCR_PXAR32;
/*
* Ok, we're now changing the port state. Do it with
/*
* Update the per-port timeout.
*/
- uart_update_timeout(port, termios->c_cflag, quot);
+ uart_update_timeout(port, termios->c_cflag, baud);
up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR;
if (termios->c_iflag & INPCK)
#ifdef CONFIG_SERIAL_PXA_CONSOLE
-extern struct uart_pxa_port serial_pxa_ports[];
-extern struct uart_driver serial_pxa_reg;
+static struct uart_pxa_port serial_pxa_ports[];
+static struct uart_driver serial_pxa_reg;
#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
}
}
+static void serial_pxa_console_putchar(struct uart_port *port, int ch)
+{
+ struct uart_pxa_port *up = (struct uart_pxa_port *)port;
+
+ wait_for_xmitr(up);
+ serial_out(up, UART_TX, ch);
+}
+
/*
* Print a string to the serial port trying not to disturb
* any possible real use of the port...
{
struct uart_pxa_port *up = &serial_pxa_ports[co->index];
unsigned int ier;
- int i;
/*
- * First save the UER then disable the interrupts
+ * First save the IER then disable the interrupts
*/
ier = serial_in(up, UART_IER);
serial_out(up, UART_IER, UART_IER_UUE);
- /*
- * Now, do each character
- */
- for (i = 0; i < count; i++, s++) {
- wait_for_xmitr(up);
-
- /*
- * Send the character out.
- * If a LF, also do CR...
- */
- serial_out(up, UART_TX, *s);
- if (*s == 10) {
- wait_for_xmitr(up);
- serial_out(up, UART_TX, 13);
- }
- }
+ uart_console_write(&up->port, s, count, serial_pxa_console_putchar);
/*
* Finally, wait for transmitter to become empty
.ops = &serial_pxa_pops,
.line = 2,
},
+ }, { /* HWUART */
+ .name = "HWUART",
+ .cken = CKEN4_HWUART,
+ .port = {
+ .type = PORT_PXA,
+ .iotype = UPIO_MEM,
+ .membase = (void *)&HWUART,
+ .mapbase = __PREG(HWUART),
+ .irq = IRQ_HWUART,
+ .uartclk = 921600 * 16,
+ .fifosize = 64,
+ .ops = &serial_pxa_pops,
+ .line = 3,
+ },
}
};
.cons = PXA_CONSOLE,
};
-static int serial_pxa_suspend(struct device *_dev, pm_message_t state, u32 level)
+static int serial_pxa_suspend(struct platform_device *dev, pm_message_t state)
{
- struct uart_pxa_port *sport = dev_get_drvdata(_dev);
+ struct uart_pxa_port *sport = platform_get_drvdata(dev);
- if (sport && level == SUSPEND_DISABLE)
+ if (sport)
uart_suspend_port(&serial_pxa_reg, &sport->port);
return 0;
}
-static int serial_pxa_resume(struct device *_dev, u32 level)
+static int serial_pxa_resume(struct platform_device *dev)
{
- struct uart_pxa_port *sport = dev_get_drvdata(_dev);
+ struct uart_pxa_port *sport = platform_get_drvdata(dev);
- if (sport && level == RESUME_ENABLE)
+ if (sport)
uart_resume_port(&serial_pxa_reg, &sport->port);
return 0;
}
-static int serial_pxa_probe(struct device *_dev)
+static int serial_pxa_probe(struct platform_device *dev)
{
- struct platform_device *dev = to_platform_device(_dev);
-
- serial_pxa_ports[dev->id].port.dev = _dev;
+ serial_pxa_ports[dev->id].port.dev = &dev->dev;
uart_add_one_port(&serial_pxa_reg, &serial_pxa_ports[dev->id].port);
- dev_set_drvdata(_dev, &serial_pxa_ports[dev->id]);
+ platform_set_drvdata(dev, &serial_pxa_ports[dev->id]);
return 0;
}
-static int serial_pxa_remove(struct device *_dev)
+static int serial_pxa_remove(struct platform_device *dev)
{
- struct uart_pxa_port *sport = dev_get_drvdata(_dev);
+ struct uart_pxa_port *sport = platform_get_drvdata(dev);
- dev_set_drvdata(_dev, NULL);
+ platform_set_drvdata(dev, NULL);
if (sport)
uart_remove_one_port(&serial_pxa_reg, &sport->port);
return 0;
}
-static struct device_driver serial_pxa_driver = {
- .name = "pxa2xx-uart",
- .bus = &platform_bus_type,
+static struct platform_driver serial_pxa_driver = {
.probe = serial_pxa_probe,
.remove = serial_pxa_remove,
.suspend = serial_pxa_suspend,
.resume = serial_pxa_resume,
+ .driver = {
+ .name = "pxa2xx-uart",
+ },
};
int __init serial_pxa_init(void)
if (ret != 0)
return ret;
- ret = driver_register(&serial_pxa_driver);
+ ret = platform_driver_register(&serial_pxa_driver);
if (ret != 0)
uart_unregister_driver(&serial_pxa_reg);
void __exit serial_pxa_exit(void)
{
- driver_unregister(&serial_pxa_driver);
+ platform_driver_unregister(&serial_pxa_driver);
uart_unregister_driver(&serial_pxa_reg);
}
git://git.onelab.eu / linux-2.6.git / blobdiff