const char *product_desc; /* product/vendor string */
char irq_descr[24]; /* driver + bus # */
- struct timer_list rh_timer; /* drives root hub */
+ struct timer_list rh_timer; /* drives root-hub polling */
+ struct urb *status_urb; /* the current status urb */
/*
* hardware info/state
*/
const struct hc_driver *driver; /* hw-specific hooks */
- unsigned saw_irq : 1;
- unsigned can_wakeup:1; /* hw supports wakeup? */
- unsigned remote_wakeup:1;/* sw should use wakeup? */
+
+ /* Flags that need to be manipulated atomically */
+ unsigned long flags;
+#define HCD_FLAG_HW_ACCESSIBLE 0x00000001
+#define HCD_FLAG_SAW_IRQ 0x00000002
+
unsigned rh_registered:1;/* is root hub registered? */
+ /* The next flag is a stopgap, to be removed when all the HCDs
+ * support the new root-hub polling mechanism. */
+ unsigned uses_new_polling:1;
+ unsigned poll_rh:1; /* poll for rh status? */
+ unsigned poll_pending:1; /* status has changed? */
+
int irq; /* irq allocated */
void __iomem *regs; /* device memory/io */
u64 rsrc_start; /* memory/io resource start */
u64 rsrc_len; /* memory/io resource length */
+ unsigned power_budget; /* in mA, 0 = no limit */
#define HCD_BUFFER_POOLS 4
struct dma_pool *pool [HCD_BUFFER_POOLS];
struct usb_operations {
int (*get_frame_number) (struct usb_device *usb_dev);
- int (*submit_urb) (struct urb *urb, int mem_flags);
+ int (*submit_urb) (struct urb *urb, gfp_t mem_flags);
int (*unlink_urb) (struct urb *urb, int status);
/* allocate dma-consistent buffer for URB_DMA_NOMAPPING */
void *(*buffer_alloc)(struct usb_bus *bus, size_t size,
- int mem_flags,
+ gfp_t mem_flags,
dma_addr_t *dma);
void (*buffer_free)(struct usb_bus *bus, size_t size,
void *addr, dma_addr_t dma);
void (*disable)(struct usb_device *udev,
struct usb_host_endpoint *ep);
-
- /* global suspend/resume of bus */
- int (*hub_suspend)(struct usb_bus *);
- int (*hub_resume)(struct usb_bus *);
};
/* each driver provides one of these, and hardware init support */
int (*start) (struct usb_hcd *hcd);
/* NOTE: these suspend/resume calls relate to the HC as
- * a whole, not just the root hub; they're for bus glue.
+ * a whole, not just the root hub; they're for PCI bus glue.
*/
- /* called after all devices were suspended */
+ /* called after suspending the hub, before entering D3 etc */
int (*suspend) (struct usb_hcd *hcd, pm_message_t message);
- /* called before any devices get resumed */
+ /* called after entering D0 (etc), before resuming the hub */
int (*resume) (struct usb_hcd *hcd);
/* cleanly make HCD stop writing memory and doing I/O */
int (*urb_enqueue) (struct usb_hcd *hcd,
struct usb_host_endpoint *ep,
struct urb *urb,
- int mem_flags);
+ gfp_t mem_flags);
int (*urb_dequeue) (struct usb_hcd *hcd, struct urb *urb);
/* hw synch, freeing endpoint resources that urb_dequeue can't */
int (*hub_control) (struct usb_hcd *hcd,
u16 typeReq, u16 wValue, u16 wIndex,
char *buf, u16 wLength);
- int (*hub_suspend)(struct usb_hcd *);
- int (*hub_resume)(struct usb_hcd *);
+ int (*bus_suspend)(struct usb_hcd *);
+ int (*bus_resume)(struct usb_hcd *);
int (*start_port_reset)(struct usb_hcd *, unsigned port_num);
+ void (*hub_irq_enable)(struct usb_hcd *);
+ /* Needed only if port-change IRQs are level-triggered */
};
extern void usb_hcd_giveback_urb (struct usb_hcd *hcd, struct urb *urb, struct pt_regs *regs);
void hcd_buffer_destroy (struct usb_hcd *hcd);
void *hcd_buffer_alloc (struct usb_bus *bus, size_t size,
- int mem_flags, dma_addr_t *dma);
+ gfp_t mem_flags, dma_addr_t *dma);
void hcd_buffer_free (struct usb_bus *bus, size_t size,
void *addr, dma_addr_t dma);
/* generic bus glue, needed for host controllers that don't use PCI */
extern irqreturn_t usb_hcd_irq (int irq, void *__hcd, struct pt_regs *r);
+
extern void usb_hc_died (struct usb_hcd *hcd);
+extern void usb_hcd_poll_rh_status(struct usb_hcd *hcd);
/* -------------------------------------------------------------------------- */
extern int usb_check_bandwidth (struct usb_device *dev, struct urb *urb);
/*
- * Ceiling microseconds (typical) for that many bytes at high speed
+ * Ceiling [nano/micro]seconds (typical) for that many bytes at high speed
* ISO is a bit less, no ACK ... from USB 2.0 spec, 5.11.3 (and needed
* to preallocate bandwidth)
*/
#define USB2_HOST_DELAY 5 /* nsec, guess */
-#define HS_USECS(bytes) NS_TO_US ( ((55 * 8 * 2083)/1000) \
- + ((2083UL * (3167 + BitTime (bytes)))/1000) \
+#define HS_NSECS(bytes) ( ((55 * 8 * 2083) \
+ + (2083UL * (3 + BitTime(bytes))))/1000 \
+ USB2_HOST_DELAY)
-#define HS_USECS_ISO(bytes) NS_TO_US ( ((38 * 8 * 2083)/1000) \
- + ((2083UL * (3167 + BitTime (bytes)))/1000) \
+#define HS_NSECS_ISO(bytes) ( ((38 * 8 * 2083) \
+ + (2083UL * (3 + BitTime(bytes))))/1000 \
+ USB2_HOST_DELAY)
+#define HS_USECS(bytes) NS_TO_US (HS_NSECS(bytes))
+#define HS_USECS_ISO(bytes) NS_TO_US (HS_NSECS_ISO(bytes))
extern long usb_calc_bus_time (int speed, int is_input,
int isoc, int bytecount);
extern struct usb_bus *usb_alloc_bus (struct usb_operations *);
-extern int usb_hcd_register_root_hub (struct usb_device *usb_dev,
- struct usb_hcd *hcd);
-
-extern void usb_hcd_resume_root_hub (struct usb_hcd *hcd);
-
extern void usb_set_device_state(struct usb_device *udev,
enum usb_device_state new_state);
/* exported only within usbcore */
extern struct list_head usb_bus_list;
-extern struct semaphore usb_bus_list_lock;
+extern struct mutex usb_bus_list_lock;
extern wait_queue_head_t usb_kill_urb_queue;
extern struct usb_bus *usb_bus_get (struct usb_bus *bus);
extern void usb_bus_put (struct usb_bus *bus);
+extern void usb_enable_root_hub_irq (struct usb_bus *bus);
+
extern int usb_find_interface_driver (struct usb_device *dev,
struct usb_interface *interface);
#define usb_endpoint_out(ep_dir) (!((ep_dir) & USB_DIR_IN))
+#ifdef CONFIG_PM
+extern void usb_hcd_suspend_root_hub (struct usb_hcd *hcd);
+extern void usb_hcd_resume_root_hub (struct usb_hcd *hcd);
+extern void usb_root_hub_lost_power (struct usb_device *rhdev);
+extern int hcd_bus_suspend (struct usb_bus *bus);
+extern int hcd_bus_resume (struct usb_bus *bus);
+#else
+static inline void usb_hcd_suspend_root_hub(struct usb_hcd *hcd)
+{
+ return;
+}
+
+static inline void usb_hcd_resume_root_hub(struct usb_hcd *hcd)
+{
+ return;
+}
+
+static inline int hcd_bus_suspend(struct usb_bus *bus)
+{
+ return 0;
+}
+
+static inline int hcd_bus_resume (struct usb_bus *bus)
+{
+ return 0;
+}
+#endif /* CONFIG_PM */
+
/*
* USB device fs stuff
*/
* these are expected to be called from the USB core/hub thread
* with the kernel lock held
*/
-extern void usbfs_add_bus(struct usb_bus *bus);
-extern void usbfs_remove_bus(struct usb_bus *bus);
-extern void usbfs_add_device(struct usb_device *dev);
-extern void usbfs_remove_device(struct usb_device *dev);
extern void usbfs_update_special (void);
-
extern int usbfs_init(void);
extern void usbfs_cleanup(void);
#else /* CONFIG_USB_DEVICEFS */
-static inline void usbfs_add_bus(struct usb_bus *bus) {}
-static inline void usbfs_remove_bus(struct usb_bus *bus) {}
-static inline void usbfs_add_device(struct usb_device *dev) {}
-static inline void usbfs_remove_device(struct usb_device *dev) {}
static inline void usbfs_update_special (void) {}
-
static inline int usbfs_init(void) { return 0; }
static inline void usbfs_cleanup(void) { }
/*-------------------------------------------------------------------------*/
-#if defined(CONFIG_USB_MON) || defined(CONFIG_USB_MON_MODULE)
+#if defined(CONFIG_USB_MON)
struct usb_mon_operations {
void (*urb_submit)(struct usb_bus *bus, struct urb *urb);
void (*urb_submit_error)(struct usb_bus *bus, struct urb *urb, int err);
void (*urb_complete)(struct usb_bus *bus, struct urb *urb);
/* void (*urb_unlink)(struct usb_bus *bus, struct urb *urb); */
- void (*bus_add)(struct usb_bus *bus);
- void (*bus_remove)(struct usb_bus *bus);
};
extern struct usb_mon_operations *mon_ops;
if (bus->monitored)
(*mon_ops->urb_complete)(bus, urb);
}
-
-static inline void usbmon_notify_bus_add(struct usb_bus *bus)
-{
- if (mon_ops)
- (*mon_ops->bus_add)(bus);
-}
-
-static inline void usbmon_notify_bus_remove(struct usb_bus *bus)
-{
- if (mon_ops)
- (*mon_ops->bus_remove)(bus);
-}
int usb_mon_register(struct usb_mon_operations *ops);
void usb_mon_deregister(void);
static inline void usbmon_urb_submit_error(struct usb_bus *bus, struct urb *urb,
int error) {}
static inline void usbmon_urb_complete(struct usb_bus *bus, struct urb *urb) {}
-static inline void usbmon_notify_bus_add(struct usb_bus *bus) {}
-static inline void usbmon_notify_bus_remove(struct usb_bus *bus) {}
#endif /* CONFIG_USB_MON */
git://git.onelab.eu / linux-2.6.git / blobdiff