fedora core 6 1.2949 + vserver 2.2.0

[linux-2.6.git] / drivers / usb / gadget / Kconfig

diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index ff075a5..4097a86 100644 (file)
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -7,7 +7,7 @@
 #
 #  - Host systems (like PCs) need CONFIG_USB (with "A" jacks).
 #  - Peripherals (like PDAs) need CONFIG_USB_GADGET (with "B" jacks).
-#  - Some systems have both kinds of of controller.
+#  - Some systems have both kinds of controllers.
 #
 # With help from a special transceiver and a "Mini-AB" jack, systems with
 # both kinds of controller can also support "USB On-the-Go" (CONFIG_USB_OTG).
@@ -26,7 +26,7 @@ config USB_GADGET
           you need a low level bus controller driver, and some software
           talking to it.  Peripheral controllers are often discrete silicon,
           or are integrated with the CPU in a microcontroller.  The more
-          familiar host side controllers have names like like "EHCI", "OHCI",
+          familiar host side controllers have names like "EHCI", "OHCI",
           or "UHCI", and are usually integrated into southbridges on PC
           motherboards.
 
@@ -69,11 +69,11 @@ choice
           often need board-specific hooks.
 
 config USB_GADGET_NET2280
-       boolean "NetChip 2280"
+       boolean "NetChip 228x"
        depends on PCI
        select USB_GADGET_DUALSPEED
        help
-          NetChip 2280 is a PCI based USB peripheral controller which
+          NetChip 2280 / 2282 is a PCI based USB peripheral controller which
           supports both full and high speed USB 2.0 data transfers.  
           
           It has six configurable endpoints, as well as endpoint zero
@@ -187,10 +187,27 @@ config USB_OTG
 
           Select this only if your OMAP board has a Mini-AB connector.
 
+config USB_GADGET_AT91
+       boolean "AT91 USB Device Port"
+       depends on ARCH_AT91
+       select USB_GADGET_SELECTED
+       help
+          Many Atmel AT91 processors (such as the AT91RM2000) have a
+          full speed USB Device Port with support for five configurable
+          endpoints (plus endpoint zero).
+
+          Say "y" to link the driver statically, or "m" to build a
+          dynamically linked module called "at91_udc" and force all
+          gadget drivers to also be dynamically linked.
+
+config USB_AT91
+       tristate
+       depends on USB_GADGET_AT91
+       default USB_GADGET
 
 config USB_GADGET_DUMMY_HCD
        boolean "Dummy HCD (DEVELOPMENT)"
-       depends on USB && EXPERIMENTAL
+       depends on (USB=y || (USB=m && USB_GADGET=m)) && EXPERIMENTAL
        select USB_GADGET_DUALSPEED
        help
          This host controller driver emulates USB, looping all data transfer
@@ -387,6 +404,20 @@ config USB_G_SERIAL
          which includes instructions and a "driver info file" needed to
          make MS-Windows work with this driver.
 
+config USB_MIDI_GADGET
+       tristate "MIDI Gadget (EXPERIMENTAL)"
+       depends on SND && EXPERIMENTAL
+       select SND_RAWMIDI
+       help
+         The MIDI Gadget acts as a USB Audio device, with one MIDI
+         input and one MIDI output. These MIDI jacks appear as
+         a sound "card" in the ALSA sound system. Other MIDI
+         connections can then be made on the gadget system, using
+         ALSA's aconnect utility etc.
+
+         Say "y" to link the driver statically, or "m" to build a
+         dynamically linked module called "g_midi".
+
 
 # put drivers that need isochronous transfer support (for audio
 # or video class gadget drivers), or specific hardware, here.