* Copyright (C) 2003 David Brownell
* Copyright (C) 2003-2005 PLX Technology, Inc.
*
+ * Modified Seth Levy 2005 PLX Technology, Inc. to provide compatibility with 2282 chip
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
#include <linux/config.h>
#include <linux/module.h>
#include <linux/pci.h>
+#include <linux/dma-mapping.h>
#include <linux/kernel.h>
#include <linux/delay.h>
#include <linux/ioport.h>
#include <asm/unaligned.h>
-#define DRIVER_DESC "PLX NET2280 USB Peripheral Controller"
-#define DRIVER_VERSION "2005 Feb 03"
+#define DRIVER_DESC "PLX NET228x USB Peripheral Controller"
+#define DRIVER_VERSION "2005 Sept 27"
#define DMA_ADDR_INVALID (~(dma_addr_t)0)
#define EP_DONTUSE 13 /* nonzero */
/* enable_suspend -- When enabled, the driver will respond to
* USB suspend requests by powering down the NET2280. Otherwise,
* USB suspend requests will be ignored. This is acceptible for
- * self-powered devices, and helps avoid some quirks.
+ * self-powered devices
*/
static int enable_suspend = 0;
ep->is_in = (tmp & USB_DIR_IN) != 0;
if (!ep->is_in)
writel ((1 << SET_NAK_OUT_PACKETS), &ep->regs->ep_rsp);
+ else if (dev->pdev->device != 0x2280) {
+ /* Added for 2282, Don't use nak packets on an in endpoint, this was ignored on 2280 */
+ writel ((1 << CLEAR_NAK_OUT_PACKETS)
+ | (1 << CLEAR_NAK_OUT_PACKETS_MODE), &ep->regs->ep_rsp);
+ }
writel (tmp, &ep->regs->ep_cfg);
writel (tmp, &dev->regs->pciirqenb0);
tmp = (1 << DATA_PACKET_RECEIVED_INTERRUPT_ENABLE)
- | (1 << DATA_PACKET_TRANSMITTED_INTERRUPT_ENABLE)
- | readl (&ep->regs->ep_irqenb);
+ | (1 << DATA_PACKET_TRANSMITTED_INTERRUPT_ENABLE);
+ if (dev->pdev->device == 0x2280)
+ tmp |= readl (&ep->regs->ep_irqenb);
writel (tmp, &ep->regs->ep_irqenb);
} else { /* dma, per-request */
tmp = (1 << (8 + ep->num)); /* completion */
/* init to our chosen defaults, notably so that we NAK OUT
* packets until the driver queues a read (+note erratum 0112)
*/
- tmp = (1 << SET_NAK_OUT_PACKETS_MODE)
+ if (!ep->is_in || ep->dev->pdev->device == 0x2280) {
+ tmp = (1 << SET_NAK_OUT_PACKETS_MODE)
| (1 << SET_NAK_OUT_PACKETS)
| (1 << CLEAR_EP_HIDE_STATUS_PHASE)
| (1 << CLEAR_INTERRUPT_MODE);
+ } else {
+ /* added for 2282 */
+ tmp = (1 << CLEAR_NAK_OUT_PACKETS_MODE)
+ | (1 << CLEAR_NAK_OUT_PACKETS)
+ | (1 << CLEAR_EP_HIDE_STATUS_PHASE)
+ | (1 << CLEAR_INTERRUPT_MODE);
+ }
if (ep->num != 0) {
tmp |= (1 << CLEAR_ENDPOINT_TOGGLE)
writel (tmp, &ep->regs->ep_rsp);
/* scrub most status bits, and flush any fifo state */
- writel ( (1 << TIMEOUT)
+ if (ep->dev->pdev->device == 0x2280)
+ tmp = (1 << FIFO_OVERFLOW)
+ | (1 << FIFO_UNDERFLOW);
+ else
+ tmp = 0;
+
+ writel (tmp | (1 << TIMEOUT)
| (1 << USB_STALL_SENT)
| (1 << USB_IN_NAK_SENT)
| (1 << USB_IN_ACK_RCVD)
| (1 << USB_OUT_PING_NAK_SENT)
| (1 << USB_OUT_ACK_SENT)
- | (1 << FIFO_OVERFLOW)
- | (1 << FIFO_UNDERFLOW)
| (1 << FIFO_FLUSH)
| (1 << SHORT_PACKET_OUT_DONE_INTERRUPT)
| (1 << SHORT_PACKET_TRANSFERRED_INTERRUPT)
/*-------------------------------------------------------------------------*/
static struct usb_request *
-net2280_alloc_request (struct usb_ep *_ep, int gfp_flags)
+net2280_alloc_request (struct usb_ep *_ep, gfp_t gfp_flags)
{
struct net2280_ep *ep;
struct net2280_request *req;
return NULL;
ep = container_of (_ep, struct net2280_ep, ep);
- req = kmalloc (sizeof *req, gfp_flags);
+ req = kzalloc(sizeof(*req), gfp_flags);
if (!req)
return NULL;
- memset (req, 0, sizeof *req);
req->req.dma = DMA_ADDR_INVALID;
INIT_LIST_HEAD (&req->queue);
#elif defined(CONFIG_PPC) && !defined(CONFIG_NOT_COHERENT_CACHE)
#define USE_KMALLOC
-#elif defined(CONFIG_MIPS) && !defined(CONFIG_NONCOHERENT_IO)
+#elif defined(CONFIG_MIPS) && !defined(CONFIG_DMA_NONCOHERENT)
#define USE_KMALLOC
/* FIXME there are other cases, including an x86-64 one ... */
struct usb_ep *_ep,
unsigned bytes,
dma_addr_t *dma,
- int gfp_flags
+ gfp_t gfp_flags
)
{
void *retval;
*/
if (ep->is_in)
dmacount |= (1 << DMA_DIRECTION);
- else if ((dmacount % ep->ep.maxpacket) != 0)
+ if ((!ep->is_in && (dmacount % ep->ep.maxpacket) != 0) || ep->dev->pdev->device != 0x2280)
dmacount |= (1 << END_OF_CHAIN);
req->valid = valid;
static void start_queue (struct net2280_ep *ep, u32 dmactl, u32 td_dma)
{
struct net2280_dma_regs __iomem *dma = ep->dma;
+ unsigned int tmp = (1 << VALID_BIT) | (ep->is_in << DMA_DIRECTION);
- writel ((1 << VALID_BIT) | (ep->is_in << DMA_DIRECTION),
- &dma->dmacount);
+ if (ep->dev->pdev->device != 0x2280)
+ tmp |= (1 << END_OF_CHAIN);
+
+ writel (tmp, &dma->dmacount);
writel (readl (&dma->dmastat), &dma->dmastat);
writel (td_dma, &dma->dmadesc);
/*-------------------------------------------------------------------------*/
static int
-net2280_queue (struct usb_ep *_ep, struct usb_request *_req, int gfp_flags)
+net2280_queue (struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
{
struct net2280_request *req;
struct net2280_ep *ep;
if (ep->in_fifo_validate)
dmactl |= (1 << DMA_FIFO_VALIDATE);
list_for_each_entry (entry, &ep->queue, queue) {
- u32 dmacount;
+ __le32 dmacount;
if (entry == req)
continue;
&ep->dma->dmadesc);
if (req->td->dmacount & dma_done_ie)
writel (readl (&ep->dma->dmacount)
- | dma_done_ie,
+ | le32_to_cpu(dma_done_ie),
&ep->dma->dmacount);
} else {
struct net2280_request *prev;
/* "function" sysfs attribute */
static ssize_t
-show_function (struct device *_dev, char *buf)
+show_function (struct device *_dev, struct device_attribute *attr, char *buf)
{
struct net2280 *dev = dev_get_drvdata (_dev);
static DEVICE_ATTR (function, S_IRUGO, show_function, NULL);
static ssize_t
-show_registers (struct device *_dev, char *buf)
+show_registers (struct device *_dev, struct device_attribute *attr, char *buf)
{
struct net2280 *dev;
char *next;
unsigned long flags;
int i;
u32 t1, t2;
- char *s;
+ const char *s;
dev = dev_get_drvdata (_dev);
next = buf;
static DEVICE_ATTR (registers, S_IRUGO, show_registers, NULL);
static ssize_t
-show_queues (struct device *_dev, char *buf)
+show_queues (struct device *_dev, struct device_attribute *attr, char *buf)
{
struct net2280 *dev;
char *next;
list_add_tail (&dev->ep [6].ep.ep_list, &dev->gadget.ep_list);
}
+/* just declare this in any driver that really need it */
+extern int net2280_set_fifo_mode (struct usb_gadget *gadget, int mode);
+
/**
* net2280_set_fifo_mode - change allocation of fifo buffers
* @gadget: access to the net2280 device that will be updated
VDEBUG (ep->dev, "%s ack ep_stat %08x, req %p\n",
ep->ep.name, t, req ? &req->req : 0);
#endif
- writel (t & ~(1 << NAK_OUT_PACKETS), &ep->regs->ep_stat);
+ if (!ep->is_in || ep->dev->pdev->device == 0x2280)
+ writel (t & ~(1 << NAK_OUT_PACKETS), &ep->regs->ep_stat);
+ else
+ /* Added for 2282 */
+ writel (t, &ep->regs->ep_stat);
/* for ep0, monitor token irqs to catch data stage length errors
* and to synchronize on status.
ep->stopped = 1;
set_halt (ep);
mode = 2;
- } else if (!req && ep->stopped)
+ } else if (!req && !ep->stopped)
write_fifo (ep, NULL);
}
} else {
if (likely (req)) {
req->td->dmacount = 0;
t = readl (&ep->regs->ep_avail);
- dma_done (ep, req, count, t);
+ dma_done (ep, req, count,
+ (ep->out_overflow || t) ? -EOVERFLOW : 0);
}
/* also flush to prevent erratum 0106 trouble */
/* if we wrote it all, we're usually done */
if (req->req.actual == req->req.length) {
if (ep->num == 0) {
- /* wait for control status */
- if (mode != 2)
- req = NULL;
+ /* send zlps until the status stage */
} else if (!req->req.zero || len != ep->ep.maxpacket)
mode = 2;
}
u32 raw [2];
struct usb_ctrlrequest r;
} u;
- int tmp = 0;
+ int tmp;
struct net2280_request *req;
if (dev->gadget.speed == USB_SPEED_UNKNOWN) {
}
ep->stopped = 0;
dev->protocol_stall = 0;
- writel ( (1 << TIMEOUT)
+
+ if (ep->dev->pdev->device == 0x2280)
+ tmp = (1 << FIFO_OVERFLOW)
+ | (1 << FIFO_UNDERFLOW);
+ else
+ tmp = 0;
+
+ writel (tmp | (1 << TIMEOUT)
| (1 << USB_STALL_SENT)
| (1 << USB_IN_NAK_SENT)
| (1 << USB_IN_ACK_RCVD)
| (1 << USB_OUT_PING_NAK_SENT)
| (1 << USB_OUT_ACK_SENT)
- | (1 << FIFO_OVERFLOW)
- | (1 << FIFO_UNDERFLOW)
| (1 << SHORT_PACKET_OUT_DONE_INTERRUPT)
| (1 << SHORT_PACKET_TRANSFERRED_INTERRUPT)
| (1 << DATA_PACKET_RECEIVED_INTERRUPT)
cpu_to_le32s (&u.raw [0]);
cpu_to_le32s (&u.raw [1]);
- le16_to_cpus (&u.r.wValue);
- le16_to_cpus (&u.r.wIndex);
- le16_to_cpus (&u.r.wLength);
+ tmp = 0;
+
+#define w_value le16_to_cpup (&u.r.wValue)
+#define w_index le16_to_cpup (&u.r.wIndex)
+#define w_length le16_to_cpup (&u.r.wLength)
/* ack the irq */
writel (1 << SETUP_PACKET_INTERRUPT, &dev->regs->irqstat0);
switch (u.r.bRequest) {
case USB_REQ_GET_STATUS: {
struct net2280_ep *e;
- u16 status;
+ __le32 status;
/* hw handles device and interface status */
if (u.r.bRequestType != (USB_DIR_IN|USB_RECIP_ENDPOINT))
goto delegate;
- if ((e = get_ep_by_addr (dev, u.r.wIndex)) == 0
- || u.r.wLength > 2)
+ if ((e = get_ep_by_addr (dev, w_index)) == 0
+ || w_length > 2)
goto do_stall;
if (readl (&e->regs->ep_rsp)
& (1 << SET_ENDPOINT_HALT))
- status = __constant_cpu_to_le16 (1);
+ status = __constant_cpu_to_le32 (1);
else
- status = __constant_cpu_to_le16 (0);
+ status = __constant_cpu_to_le32 (0);
/* don't bother with a request object! */
writel (0, &dev->epregs [0].ep_irqenb);
- set_fifo_bytecount (ep, u.r.wLength);
- writel (status, &dev->epregs [0].ep_data);
+ set_fifo_bytecount (ep, w_length);
+ writel ((__force u32)status, &dev->epregs [0].ep_data);
allow_status (ep);
VDEBUG (dev, "%s stat %02x\n", ep->ep.name, status);
goto next_endpoints;
/* hw handles device features */
if (u.r.bRequestType != USB_RECIP_ENDPOINT)
goto delegate;
- if (u.r.wValue != USB_ENDPOINT_HALT
- || u.r.wLength != 0)
+ if (w_value != USB_ENDPOINT_HALT
+ || w_length != 0)
goto do_stall;
- if ((e = get_ep_by_addr (dev, u.r.wIndex)) == 0)
+ if ((e = get_ep_by_addr (dev, w_index)) == 0)
goto do_stall;
clear_halt (e);
allow_status (ep);
/* hw handles device features */
if (u.r.bRequestType != USB_RECIP_ENDPOINT)
goto delegate;
- if (u.r.wValue != USB_ENDPOINT_HALT
- || u.r.wLength != 0)
+ if (w_value != USB_ENDPOINT_HALT
+ || w_length != 0)
goto do_stall;
- if ((e = get_ep_by_addr (dev, u.r.wIndex)) == 0)
+ if ((e = get_ep_by_addr (dev, w_index)) == 0)
goto do_stall;
set_halt (e);
allow_status (ep);
break;
default:
delegate:
- VDEBUG (dev, "setup %02x.%02x v%04x i%04x "
+ VDEBUG (dev, "setup %02x.%02x v%04x i%04x l%04x"
"ep_cfg %08x\n",
u.r.bRequestType, u.r.bRequest,
- u.r.wValue, u.r.wIndex,
+ w_value, w_index, w_length,
readl (&ep->regs->ep_cfg));
spin_unlock (&dev->lock);
tmp = dev->driver->setup (&dev->gadget, &u.r);
*/
}
+#undef w_value
+#undef w_index
+#undef w_length
+
next_endpoints:
/* endpoint data irq ? */
scratch = stat & 0x7f;
writel (stat, &dev->regs->irqstat1);
/* some status we can just ignore */
- stat &= ~((1 << CONTROL_STATUS_INTERRUPT)
- | (1 << SUSPEND_REQUEST_INTERRUPT)
- | (1 << RESUME_INTERRUPT)
- | (1 << SOF_INTERRUPT));
+ if (dev->pdev->device == 0x2280)
+ stat &= ~((1 << CONTROL_STATUS_INTERRUPT)
+ | (1 << SUSPEND_REQUEST_INTERRUPT)
+ | (1 << RESUME_INTERRUPT)
+ | (1 << SOF_INTERRUPT));
+ else
+ stat &= ~((1 << CONTROL_STATUS_INTERRUPT)
+ | (1 << RESUME_INTERRUPT)
+ | (1 << SOF_DOWN_INTERRUPT)
+ | (1 << SOF_INTERRUPT));
+
if (!stat)
return;
// DEBUG (dev, "irqstat1 %08x\n", stat);
restart_dma (ep);
else if (ep->is_in && use_dma_chaining) {
struct net2280_request *req;
- u32 dmacount;
+ __le32 dmacount;
/* the descriptor at the head of the chain
* may still have VALID_BIT clear; that's
{
struct net2280 *dev = _dev;
+ /* shared interrupt, not ours */
+ if (!(readl(&dev->regs->irqstat0) & (1 << INTA_ASSERTED)))
+ return IRQ_NONE;
+
spin_lock (&dev->lock);
/* handle disconnect, dma, and more */
}
/* alloc, and start init */
- dev = kmalloc (sizeof *dev, SLAB_KERNEL);
+ dev = kzalloc (sizeof *dev, SLAB_KERNEL);
if (dev == NULL){
retval = -ENOMEM;
goto done;
}
- memset (dev, 0, sizeof *dev);
+ pci_set_drvdata (pdev, dev);
spin_lock_init (&dev->lock);
dev->pdev = pdev;
dev->gadget.ops = &net2280_ops;
dev->chiprev = get_idx_reg (dev->regs, REG_CHIPREV) & 0xffff;
/* done */
- pci_set_drvdata (pdev, dev);
INFO (dev, "%s\n", driver_desc);
INFO (dev, "irq %s, pci mem %p, chip rev %04x\n",
bufp, base, dev->chiprev);
.device = 0x2280,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
+}, {
+ .class = ((PCI_CLASS_SERIAL_USB << 8) | 0xfe),
+ .class_mask = ~0,
+ .vendor = 0x17cc,
+ .device = 0x2282,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
}, { /* end: all zeroes */ }
};
git://git.onelab.eu / linux-2.6.git / blobdiff