fedora core 6 1.2949 + vserver 2.2.0

[linux-2.6.git] / drivers / usb / host / Kconfig

diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index be3fd9b..cc60759 100644 (file)
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -6,7 +6,7 @@ comment "USB Host Controller Drivers"
 
 config USB_EHCI_HCD
        tristate "EHCI HCD (USB 2.0) support"
-       depends on USB && PCI
+       depends on USB && USB_ARCH_HAS_EHCI
        ---help---
          The Enhanced Host Controller Interface (EHCI) is standard for USB 2.0
          "high speed" (480 Mbit/sec, 60 Mbyte/sec) host controller hardware.
@@ -47,12 +47,29 @@ config USB_EHCI_ROOT_HUB_TT
          controller is needed.  It's safe to say "y" even if your
          controller doesn't support this feature.
 
-         This supports the EHCI implementation from TransDimension Inc.
+         This supports the EHCI implementation that's originally
+         from ARC, and has since changed hands a few times.
+
+config USB_EHCI_TT_NEWSCHED
+       bool "Improved Transaction Translator scheduling (EXPERIMENTAL)"
+       depends on USB_EHCI_HCD && EXPERIMENTAL
+       ---help---
+         This changes the periodic scheduling code to fill more of the low
+         and full speed bandwidth available from the Transaction Translator
+         (TT) in USB 2.0 hubs.  Without this, only one transfer will be
+         issued in each microframe, significantly reducing the number of
+         periodic low/fullspeed transfers possible.
+
+         If you have multiple periodic low/fullspeed devices connected to a
+         highspeed USB hub which is connected to a highspeed USB Host
+         Controller, and some of those devices will not work correctly
+         (possibly due to "ENOSPC" or "-28" errors), say Y.
+
+         If unsure, say N.
 
 config USB_ISP116X_HCD
        tristate "ISP116X HCD support"
        depends on USB
-       default N
        ---help---
          The ISP1160 and ISP1161 chips are USB host controllers. Enable this
          option if your board has this chip. If unsure, say N.
@@ -66,6 +83,7 @@ config USB_OHCI_HCD
        tristate "OHCI HCD support"
        depends on USB && USB_ARCH_HAS_OHCI
        select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3
+       select I2C if ARCH_PNX4008
        ---help---
          The Open Host Controller Interface (OHCI) is a standard for accessing
          USB 1.1 host controller hardware.  It does more in hardware than Intel's
@@ -124,10 +142,37 @@ config USB_UHCI_HCD
          To compile this driver as a module, choose M here: the
          module will be called uhci-hcd.
 
+config USB_U132_HCD
+       tristate "Elan U132 Adapter Host Controller"
+       depends on USB && USB_FTDI_ELAN
+       default M
+       help
+         The U132 adapter is a USB to CardBus adapter specifically designed
+         for PC cards that contain an OHCI host controller. Typical PC cards
+         are the Orange Mobile 3G Option GlobeTrotter Fusion card. The U132
+         adapter will *NOT* work with PC cards that do not contain an OHCI
+         controller.
+
+         For those PC cards that contain multiple OHCI controllers only the
+         first one is used.
+
+         The driver consists of two modules, the "ftdi-elan" module is a
+         USB client driver that interfaces to the FTDI chip within ELAN's
+         USB-to-PCMCIA adapter, and this "u132-hcd" module is a USB host
+         controller driver that talks to the OHCI controller within the
+         CardBus cards that are inserted in the U132 adapter.
+
+         This driver has been tested with a CardBus OHCI USB adapter, and
+         worked with a USB PEN Drive inserted into the first USB port of
+         the PCCARD. A rather pointless thing to do, but useful for testing.
+
+         It is safe to say M here.
+
+         See also <http://www.elandigitalsystems.com/support/ufaq/u132linux.php>
+
 config USB_SL811_HCD
        tristate "SL811HS HCD support"
        depends on USB
-       default N
        help
          The SL811HS is a single-port USB controller that supports either
          host side or peripheral side roles.  Enable this option if your
@@ -140,7 +185,6 @@ config USB_SL811_HCD
 config USB_SL811_CS
        tristate "CF/PCMCIA support for SL811HS HCD"
        depends on USB_SL811_HCD && PCMCIA
-       default N
        help
          Wraps a PCMCIA driver around the SL811HS HCD, supporting the RATOC
          REX-CFU1U CF card (often used with PDAs).  If unsure, say N.