return 1;
}
-#ifdef CONFIG_USB_EHCI_TT_NEWSCHED
-
-/* Which uframe does the low/fullspeed transfer start in?
- *
- * The parameter is the mask of ssplits in "H-frame" terms
- * and this returns the transfer start uframe in "B-frame" terms,
- * which allows both to match, e.g. a ssplit in "H-frame" uframe 0
- * will cause a transfer in "B-frame" uframe 0. "B-frames" lag
- * "H-frames" by 1 uframe. See the EHCI spec sec 4.5 and figure 4.7.
- */
-static inline unsigned char tt_start_uframe(struct ehci_hcd *ehci, __le32 mask)
-{
- unsigned char smask = QH_SMASK & le32_to_cpu(mask);
- if (!smask) {
- ehci_err(ehci, "invalid empty smask!\n");
- /* uframe 7 can't have bw so this will indicate failure */
- return 7;
- }
- return ffs(smask) - 1;
-}
-
-static const unsigned char
-max_tt_usecs[] = { 125, 125, 125, 125, 125, 125, 30, 0 };
-
-/* carryover low/fullspeed bandwidth that crosses uframe boundries */
-static inline void carryover_tt_bandwidth(unsigned short tt_usecs[8])
-{
- int i;
- for (i=0; i<7; i++) {
- if (max_tt_usecs[i] < tt_usecs[i]) {
- tt_usecs[i+1] += tt_usecs[i] - max_tt_usecs[i];
- tt_usecs[i] = max_tt_usecs[i];
- }
- }
-}
-
-/* How many of the tt's periodic downstream 1000 usecs are allocated?
- *
- * While this measures the bandwidth in terms of usecs/uframe,
- * the low/fullspeed bus has no notion of uframes, so any particular
- * low/fullspeed transfer can "carry over" from one uframe to the next,
- * since the TT just performs downstream transfers in sequence.
- *
- * For example two seperate 100 usec transfers can start in the same uframe,
- * and the second one would "carry over" 75 usecs into the next uframe.
- */
-static void
-periodic_tt_usecs (
- struct ehci_hcd *ehci,
- struct usb_device *dev,
- unsigned frame,
- unsigned short tt_usecs[8]
-)
-{
- __le32 *hw_p = &ehci->periodic [frame];
- union ehci_shadow *q = &ehci->pshadow [frame];
- unsigned char uf;
-
- memset(tt_usecs, 0, 16);
-
- while (q->ptr) {
- switch (Q_NEXT_TYPE(*hw_p)) {
- case Q_TYPE_ITD:
- hw_p = &q->itd->hw_next;
- q = &q->itd->itd_next;
- continue;
- case Q_TYPE_QH:
- if (same_tt(dev, q->qh->dev)) {
- uf = tt_start_uframe(ehci, q->qh->hw_info2);
- tt_usecs[uf] += q->qh->tt_usecs;
- }
- hw_p = &q->qh->hw_next;
- q = &q->qh->qh_next;
- continue;
- case Q_TYPE_SITD:
- if (same_tt(dev, q->sitd->urb->dev)) {
- uf = tt_start_uframe(ehci, q->sitd->hw_uframe);
- tt_usecs[uf] += q->sitd->stream->tt_usecs;
- }
- hw_p = &q->sitd->hw_next;
- q = &q->sitd->sitd_next;
- continue;
- // case Q_TYPE_FSTN:
- default:
- ehci_dbg(ehci,
- "ignoring periodic frame %d FSTN\n", frame);
- hw_p = &q->fstn->hw_next;
- q = &q->fstn->fstn_next;
- }
- }
-
- carryover_tt_bandwidth(tt_usecs);
-
- if (max_tt_usecs[7] < tt_usecs[7])
- ehci_err(ehci, "frame %d tt sched overrun: %d usecs\n",
- frame, tt_usecs[7] - max_tt_usecs[7]);
-}
-
-/*
- * Return true if the device's tt's downstream bus is available for a
- * periodic transfer of the specified length (usecs), starting at the
- * specified frame/uframe. Note that (as summarized in section 11.19
- * of the usb 2.0 spec) TTs can buffer multiple transactions for each
- * uframe.
- *
- * The uframe parameter is when the fullspeed/lowspeed transfer
- * should be executed in "B-frame" terms, which is the same as the
- * highspeed ssplit's uframe (which is in "H-frame" terms). For example
- * a ssplit in "H-frame" 0 causes a transfer in "B-frame" 0.
- * See the EHCI spec sec 4.5 and fig 4.7.
- *
- * This checks if the full/lowspeed bus, at the specified starting uframe,
- * has the specified bandwidth available, according to rules listed
- * in USB 2.0 spec section 11.18.1 fig 11-60.
- *
- * This does not check if the transfer would exceed the max ssplit
- * limit of 16, specified in USB 2.0 spec section 11.18.4 requirement #4,
- * since proper scheduling limits ssplits to less than 16 per uframe.
- */
-static int tt_available (
- struct ehci_hcd *ehci,
- unsigned period,
- struct usb_device *dev,
- unsigned frame,
- unsigned uframe,
- u16 usecs
-)
-{
- if ((period == 0) || (uframe >= 7)) /* error */
- return 0;
-
- for (; frame < ehci->periodic_size; frame += period) {
- unsigned short tt_usecs[8];
-
- periodic_tt_usecs (ehci, dev, frame, tt_usecs);
-
- ehci_vdbg(ehci, "tt frame %d check %d usecs start uframe %d in"
- " schedule %d/%d/%d/%d/%d/%d/%d/%d\n",
- frame, usecs, uframe,
- tt_usecs[0], tt_usecs[1], tt_usecs[2], tt_usecs[3],
- tt_usecs[4], tt_usecs[5], tt_usecs[6], tt_usecs[7]);
-
- if (max_tt_usecs[uframe] <= tt_usecs[uframe]) {
- ehci_vdbg(ehci, "frame %d uframe %d fully scheduled\n",
- frame, uframe);
- return 0;
- }
-
- /* special case for isoc transfers larger than 125us:
- * the first and each subsequent fully used uframe
- * must be empty, so as to not illegally delay
- * already scheduled transactions
- */
- if (125 < usecs) {
- int ufs = (usecs / 125) - 1;
- int i;
- for (i = uframe; i < (uframe + ufs) && i < 8; i++)
- if (0 < tt_usecs[i]) {
- ehci_vdbg(ehci,
- "multi-uframe xfer can't fit "
- "in frame %d uframe %d\n",
- frame, i);
- return 0;
- }
- }
-
- tt_usecs[uframe] += usecs;
-
- carryover_tt_bandwidth(tt_usecs);
-
- /* fail if the carryover pushed bw past the last uframe's limit */
- if (max_tt_usecs[7] < tt_usecs[7]) {
- ehci_vdbg(ehci,
- "tt unavailable usecs %d frame %d uframe %d\n",
- usecs, frame, uframe);
- return 0;
- }
- }
-
- return 1;
-}
-
-#else
-
/* return true iff the device's transaction translator is available
* for a periodic transfer starting at the specified frame, using
* all the uframes in the mask.
return 1;
}
-#endif /* CONFIG_USB_EHCI_TT_NEWSCHED */
-
/*-------------------------------------------------------------------------*/
static int enable_periodic (struct ehci_hcd *ehci)
)
{
int retval = -ENOSPC;
- u8 mask = 0;
+ u8 mask;
if (qh->c_usecs && uframe >= 6) /* FSTN territory? */
goto done;
goto done;
}
-#ifdef CONFIG_USB_EHCI_TT_NEWSCHED
- if (tt_available (ehci, qh->period, qh->dev, frame, uframe,
- qh->tt_usecs)) {
- unsigned i;
-
- /* TODO : this may need FSTN for SSPLIT in uframe 5. */
- for (i=uframe+1; i<8 && i<uframe+4; i++)
- if (!check_period (ehci, frame, i,
- qh->period, qh->c_usecs))
- goto done;
- else
- mask |= 1 << i;
-
- retval = 0;
-
- *c_maskp = cpu_to_le32 (mask << 8);
- }
-#else
/* Make sure this tt's buffer is also available for CSPLITs.
* We pessimize a bit; probably the typical full speed case
* doesn't need the second CSPLIT.
goto done;
retval = 0;
}
-#endif
done:
return retval;
}
int size = sizeof *iso_sched;
size += packets * sizeof (struct ehci_iso_packet);
- iso_sched = kzalloc(size, mem_flags);
+ iso_sched = kmalloc (size, mem_flags);
if (likely (iso_sched != NULL)) {
+ memset(iso_sched, 0, size);
INIT_LIST_HEAD (&iso_sched->td_list);
}
return iso_sched;
frame = uframe >> 3;
uf = uframe & 7;
-#ifdef CONFIG_USB_EHCI_TT_NEWSCHED
- /* The tt's fullspeed bus bandwidth must be available.
- * tt_available scheduling guarantees 10+% for control/bulk.
- */
- if (!tt_available (ehci, period_uframes << 3,
- stream->udev, frame, uf, stream->tt_usecs))
- return 0;
-#else
/* tt must be idle for start(s), any gap, and csplit.
* assume scheduling slop leaves 10+% for control/bulk.
*/
if (!tt_no_collision (ehci, period_uframes << 3,
stream->udev, frame, mask))
return 0;
-#endif
/* check starts (OUT uses more than one) */
max_used = 100 - stream->usecs;
*/
/* give urb back to the driver ... can be out-of-order */
- dev = urb->dev;
+ dev = usb_get_dev (urb->dev);
ehci_urb_done (ehci, urb, regs);
urb = NULL;
(stream->bEndpointAddress & USB_DIR_IN) ? "in" : "out");
}
iso_stream_put (ehci, stream);
+ usb_put_dev (dev);
return 1;
}
*/
/* give urb back to the driver */
- dev = urb->dev;
+ dev = usb_get_dev (urb->dev);
ehci_urb_done (ehci, urb, regs);
urb = NULL;
(stream->bEndpointAddress & USB_DIR_IN) ? "in" : "out");
}
iso_stream_put (ehci, stream);
+ usb_put_dev (dev);
return 1;
}