err += sn9c102_write_reg(cam, 0x44, 0x01);
err += sn9c102_write_reg(cam, 0x00, 0x10);
err += sn9c102_write_reg(cam, 0x00, 0x11);
- err += sn9c102_write_reg(cam, 0x00, 0x14);
+ err += sn9c102_write_reg(cam, 0x0a, 0x14);
err += sn9c102_write_reg(cam, 0x60, 0x17);
err += sn9c102_write_reg(cam, 0x06, 0x18);
- err += sn9c102_write_reg(cam, 0xcb, 0x19);
+ err += sn9c102_write_reg(cam, 0xfb, 0x19);
+
+ err += sn9c102_i2c_try_raw_write(cam, &tas5110c1b, 4, 0x11, 0x00, 0xc0,
+ 0x80, 0, 0);
return err;
}
+static int tas5110c1b_set_ctrl(struct sn9c102_device* cam,
+ const struct v4l2_control* ctrl)
+{
+ switch (ctrl->id) {
+ case V4L2_CID_GAIN:
+ return sn9c102_i2c_try_raw_write(cam, &tas5110c1b, 4, 0x11,
+ 0x02, 0x20,
+ 0xff - (ctrl->value & 0xff),
+ 0, 0);
+ default:
+ return -EINVAL;
+ }
+}
+
+
static int tas5110c1b_set_crop(struct sn9c102_device* cam,
const struct v4l2_rect* rect)
{
err += sn9c102_write_reg(cam, h_start, 0x12);
err += sn9c102_write_reg(cam, v_start, 0x13);
+ /* Don't change ! */
+ err += sn9c102_write_reg(cam, 0x14, 0x1a);
+ err += sn9c102_write_reg(cam, 0x0a, 0x1b);
+ err += sn9c102_write_reg(cam, 0xfb, 0x19);
+
return err;
}
static struct sn9c102_sensor tas5110c1b = {
.name = "TAS5110C1B",
.maintainer = "Luca Risolia <luca.risolia@studio.unibo.it>",
+ .frequency = SN9C102_I2C_100KHZ,
+ .interface = SN9C102_I2C_3WIRES,
.init = &tas5110c1b_init,
+ .qctrl = {
+ {
+ .id = V4L2_CID_GAIN,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "global gain",
+ .minimum = 0x00,
+ .maximum = 0xff,
+ .step = 0x01,
+ .default_value = 0x48,
+ .flags = 0,
+ },
+ },
+ .set_ctrl = &tas5110c1b_set_ctrl,
.cropcap = {
.bounds = {
.left = 0,
/* This sensor has no identifiers, so let's attach it anyway */
sn9c102_attach_sensor(cam, &tas5110c1b);
- /* At the moment, only devices whose PID is 0x6005 have this sensor */
- if (tas5110c1b.usbdev->descriptor.idProduct != 0x6005)
+ /* At the moment, sensor detection is based on USB pid/vid */
+ if (tas5110c1b.usbdev->descriptor.idProduct != 0x6001 &&
+ tas5110c1b.usbdev->descriptor.idProduct != 0x6005)
return -ENODEV;
return 0;