err += sn9c102_write_reg(cam, 0x00, 0x14);
err += sn9c102_write_reg(cam, 0x60, 0x17);
err += sn9c102_write_reg(cam, 0x07, 0x18);
- err += sn9c102_write_reg(cam, 0x33, 0x19);
err += sn9c102_i2c_try_raw_write(cam, &tas5130d1b, 4, 0x11, 0x00, 0x40,
0x47, 0, 0);
- err += sn9c102_i2c_try_raw_write(cam, &tas5130d1b, 4, 0x11, 0x02, 0x20,
- 0xa9, 0, 0);
- err += sn9c102_i2c_try_raw_write(cam, &tas5130d1b, 4, 0x11, 0x00, 0xc0,
- 0x49, 0, 0);
- err += sn9c102_i2c_try_raw_write(cam, &tas5130d1b, 4, 0x11, 0x02, 0x20,
- 0x6c, 0, 0);
- err += sn9c102_i2c_try_raw_write(cam, &tas5130d1b, 4, 0x11, 0x00, 0xc0,
- 0x08, 0, 0);
- err += sn9c102_i2c_try_raw_write(cam, &tas5130d1b, 4, 0x11, 0x00, 0x20,
- 0x00, 0, 0);
-
- err += sn9c102_write_reg(cam, 0x63, 0x19);
return err;
}
+static int tas5130d1b_set_ctrl(struct sn9c102_device* cam,
+ const struct v4l2_control* ctrl)
+{
+ switch (ctrl->id) {
+ case V4L2_CID_GAIN:
+ return sn9c102_i2c_try_raw_write(cam, &tas5130d1b, 4, 0x11,
+ 0x02, 0x20,
+ 0xff - (ctrl->value & 0xff),
+ 0, 0);
+ default:
+ return -EINVAL;
+ }
+}
+
+
static int tas5130d1b_set_crop(struct sn9c102_device* cam,
const struct v4l2_rect* rect)
{
struct sn9c102_sensor* s = &tas5130d1b;
- int err = 0;
u8 h_start = (u8)(rect->left - s->cropcap.bounds.left) + 104,
v_start = (u8)(rect->top - s->cropcap.bounds.top) + 12;
+ int err = 0;
err += sn9c102_write_reg(cam, h_start, 0x12);
err += sn9c102_write_reg(cam, v_start, 0x13);
+ /* Do NOT change! */
+ err += sn9c102_write_reg(cam, 0x1d, 0x1a);
+ err += sn9c102_write_reg(cam, 0x10, 0x1b);
+ err += sn9c102_write_reg(cam, 0xf3, 0x19);
+
return err;
}
.frequency = SN9C102_I2C_100KHZ,
.interface = SN9C102_I2C_3WIRES,
.init = &tas5130d1b_init,
+ .qctrl = {
+ {
+ .id = V4L2_CID_GAIN,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "global gain",
+ .minimum = 0x00,
+ .maximum = 0xff,
+ .step = 0x01,
+ .default_value = 0x00,
+ .flags = 0,
+ },
+ },
+ .set_ctrl = &tas5130d1b_set_ctrl,
.cropcap = {
.bounds = {
.left = 0,
/* This sensor has no identifiers, so let's attach it anyway */
sn9c102_attach_sensor(cam, &tas5130d1b);
- /* At the moment, only devices whose PID is 0x6025 have this sensor */
+ /* At the moment, sensor detection is based on USB pid/vid */
if (tas5130d1b.usbdev->descriptor.idProduct != 0x6025)
return -ENODEV;
- dev_info(tas5130d1b.dev, "TAS5130D1B detected, but the support for it "
- "is disabled at the moment - needs further "
- "testing -\n");
-
- return -ENODEV;
+ return 0;
}