// #define DEBUG // error path messages, extra info
// #define VERBOSE // more; success messages
-#include <linux/config.h>
#include <linux/module.h>
#include <linux/sched.h>
#include <linux/init.h>
* let the USB host controller be busy for 5msec or more before an irq
* is required, under load. Jumbograms change the equation.
*/
-#define RX_QLEN(dev) (((dev)->udev->speed == USB_SPEED_HIGH) ? 60 : 4)
-#define TX_QLEN(dev) (((dev)->udev->speed == USB_SPEED_HIGH) ? 60 : 4)
+#define RX_MAX_QUEUE_MEMORY (60 * 1518)
+#define RX_QLEN(dev) (((dev)->udev->speed == USB_SPEED_HIGH) ? \
+ (RX_MAX_QUEUE_MEMORY/(dev)->rx_urb_size) : 4)
+#define TX_QLEN(dev) (((dev)->udev->speed == USB_SPEED_HIGH) ? \
+ (RX_MAX_QUEUE_MEMORY/(dev)->hard_mtu) : 4)
// reawaken network queue this soon after stopping; else watchdog barks
#define TX_TIMEOUT_JIFFIES (5*HZ)
e = alt->endpoint + ep;
switch (e->desc.bmAttributes) {
case USB_ENDPOINT_XFER_INT:
- if (!(e->desc.bEndpointAddress & USB_DIR_IN))
+ if (!usb_endpoint_dir_in(&e->desc))
continue;
intr = 1;
/* FALLTHROUGH */
default:
continue;
}
- if (e->desc.bEndpointAddress & USB_DIR_IN) {
+ if (usb_endpoint_dir_in(&e->desc)) {
if (!intr && !in)
in = e;
else if (intr && !status)
}
EXPORT_SYMBOL_GPL(usbnet_get_endpoints);
-static void intr_complete (struct urb *urb, struct pt_regs *regs);
+static void intr_complete (struct urb *urb);
static int init_status (struct usbnet *dev, struct usb_interface *intf)
{
period = max ((int) dev->status->desc.bInterval,
(dev->udev->speed == USB_SPEED_HIGH) ? 7 : 3);
- buf = kmalloc (maxp, SLAB_KERNEL);
+ buf = kmalloc (maxp, GFP_KERNEL);
if (buf) {
- dev->interrupt = usb_alloc_urb (0, SLAB_KERNEL);
+ dev->interrupt = usb_alloc_urb (0, GFP_KERNEL);
if (!dev->interrupt) {
kfree (buf);
return -ENOMEM;
{
struct usbnet *dev = netdev_priv(net);
int ll_mtu = new_mtu + net->hard_header_len;
+ int old_hard_mtu = dev->hard_mtu;
+ int old_rx_urb_size = dev->rx_urb_size;
- if (new_mtu <= 0 || ll_mtu > dev->hard_mtu)
+ if (new_mtu <= 0)
return -EINVAL;
// no second zero-length packet read wanted after mtu-sized packets
if ((ll_mtu % dev->maxpacket) == 0)
return -EDOM;
net->mtu = new_mtu;
+
+ dev->hard_mtu = net->mtu + net->hard_header_len;
+ if (dev->rx_urb_size == old_hard_mtu) {
+ dev->rx_urb_size = dev->hard_mtu;
+ if (dev->rx_urb_size > old_rx_urb_size)
+ usbnet_unlink_rx_urbs(dev);
+ }
+
return 0;
}
/*-------------------------------------------------------------------------*/
-static void rx_complete (struct urb *urb, struct pt_regs *regs);
+static void rx_complete (struct urb *urb);
static void rx_submit (struct usbnet *dev, struct urb *urb, gfp_t flags)
{
/*-------------------------------------------------------------------------*/
-static void rx_complete (struct urb *urb, struct pt_regs *regs)
+static void rx_complete (struct urb *urb)
{
struct sk_buff *skb = (struct sk_buff *) urb->context;
struct skb_data *entry = (struct skb_data *) skb->cb;
// we get controller i/o faults during khubd disconnect() delays.
// throttle down resubmits, to avoid log floods; just temporarily,
// so we still recover when the fault isn't a khubd delay.
- case -EPROTO: // ehci
- case -ETIMEDOUT: // ohci
- case -EILSEQ: // uhci
+ case -EPROTO:
+ case -ETIME:
+ case -EILSEQ:
dev->stats.rx_errors++;
if (!timer_pending (&dev->delay)) {
mod_timer (&dev->delay, jiffies + THROTTLE_JIFFIES);
devdbg (dev, "no read resubmitted");
}
-static void intr_complete (struct urb *urb, struct pt_regs *regs)
+static void intr_complete (struct urb *urb)
{
struct usbnet *dev = urb->context;
int status = urb->status;
return count;
}
+// Flush all pending rx urbs
+// minidrivers may need to do this when the MTU changes
+
+void usbnet_unlink_rx_urbs(struct usbnet *dev)
+{
+ if (netif_running(dev->net)) {
+ (void) unlink_urbs (dev, &dev->rxq);
+ tasklet_schedule(&dev->bh);
+ }
+}
+EXPORT_SYMBOL_GPL(usbnet_unlink_rx_urbs);
/*-------------------------------------------------------------------------*/
{
struct usbnet *dev = netdev_priv(net);
int temp;
- DECLARE_WAIT_QUEUE_HEAD (unlink_wakeup);
+ DECLARE_WAIT_QUEUE_HEAD_ONSTACK (unlink_wakeup);
DECLARE_WAITQUEUE (wait, current);
netif_stop_queue (net);
devinfo (dev, "open: enable queueing "
"(rx %d, tx %d) mtu %d %s framing",
- RX_QLEN (dev), TX_QLEN (dev), dev->net->mtu,
+ (int)RX_QLEN (dev), (int)TX_QLEN (dev), dev->net->mtu,
framing);
}
* they'll probably want to use this base set.
*/
-void usbnet_get_drvinfo (struct net_device *net, struct ethtool_drvinfo *info)
+#if defined(CONFIG_MII) || defined(CONFIG_MII_MODULE)
+#define HAVE_MII
+
+int usbnet_get_settings (struct net_device *net, struct ethtool_cmd *cmd)
{
struct usbnet *dev = netdev_priv(net);
- /* REVISIT don't always return "usbnet" */
- strncpy (info->driver, driver_name, sizeof info->driver);
- strncpy (info->version, DRIVER_VERSION, sizeof info->version);
- strncpy (info->fw_version, dev->driver_info->description,
- sizeof info->fw_version);
- usb_make_path (dev->udev, info->bus_info, sizeof info->bus_info);
+ if (!dev->mii.mdio_read)
+ return -EOPNOTSUPP;
+
+ return mii_ethtool_gset(&dev->mii, cmd);
}
-EXPORT_SYMBOL_GPL(usbnet_get_drvinfo);
+EXPORT_SYMBOL_GPL(usbnet_get_settings);
+
+int usbnet_set_settings (struct net_device *net, struct ethtool_cmd *cmd)
+{
+ struct usbnet *dev = netdev_priv(net);
+ int retval;
+
+ if (!dev->mii.mdio_write)
+ return -EOPNOTSUPP;
+
+ retval = mii_ethtool_sset(&dev->mii, cmd);
+
+ /* link speed/duplex might have changed */
+ if (dev->driver_info->link_reset)
+ dev->driver_info->link_reset(dev);
+
+ return retval;
+
+}
+EXPORT_SYMBOL_GPL(usbnet_set_settings);
-static u32 usbnet_get_link (struct net_device *net)
+u32 usbnet_get_link (struct net_device *net)
{
struct usbnet *dev = netdev_priv(net);
if (dev->driver_info->check_connect)
return dev->driver_info->check_connect (dev) == 0;
+ /* if the device has mii operations, use those */
+ if (dev->mii.mdio_read)
+ return mii_link_ok(&dev->mii);
+
/* Otherwise, say we're up (to avoid breaking scripts) */
return 1;
}
+EXPORT_SYMBOL_GPL(usbnet_get_link);
+
+int usbnet_nway_reset(struct net_device *net)
+{
+ struct usbnet *dev = netdev_priv(net);
+
+ if (!dev->mii.mdio_write)
+ return -EOPNOTSUPP;
+
+ return mii_nway_restart(&dev->mii);
+}
+EXPORT_SYMBOL_GPL(usbnet_nway_reset);
+
+#endif /* HAVE_MII */
+
+void usbnet_get_drvinfo (struct net_device *net, struct ethtool_drvinfo *info)
+{
+ struct usbnet *dev = netdev_priv(net);
+
+ /* REVISIT don't always return "usbnet" */
+ strncpy (info->driver, driver_name, sizeof info->driver);
+ strncpy (info->version, DRIVER_VERSION, sizeof info->version);
+ strncpy (info->fw_version, dev->driver_info->description,
+ sizeof info->fw_version);
+ usb_make_path (dev->udev, info->bus_info, sizeof info->bus_info);
+}
+EXPORT_SYMBOL_GPL(usbnet_get_drvinfo);
u32 usbnet_get_msglevel (struct net_device *net)
{
/* drivers may override default ethtool_ops in their bind() routine */
static struct ethtool_ops usbnet_ethtool_ops = {
- .get_drvinfo = usbnet_get_drvinfo,
+#ifdef HAVE_MII
+ .get_settings = usbnet_get_settings,
+ .set_settings = usbnet_set_settings,
.get_link = usbnet_get_link,
+ .nway_reset = usbnet_nway_reset,
+#endif
+ .get_drvinfo = usbnet_get_drvinfo,
.get_msglevel = usbnet_get_msglevel,
.set_msglevel = usbnet_set_msglevel,
};
* especially now that control transfers can be queued.
*/
static void
-kevent (void *data)
+kevent (struct work_struct *work)
{
- struct usbnet *dev = data;
+ struct usbnet *dev =
+ container_of(work, struct usbnet, kevent);
int status;
/* usb_clear_halt() needs a thread context */
/*-------------------------------------------------------------------------*/
-static void tx_complete (struct urb *urb, struct pt_regs *regs)
+static void tx_complete (struct urb *urb)
{
struct sk_buff *skb = (struct sk_buff *) urb->context;
struct skb_data *entry = (struct skb_data *) skb->cb;
// like rx, tx gets controller i/o faults during khubd delays
// and so it uses the same throttling mechanism.
- case -EPROTO: // ehci
- case -ETIMEDOUT: // ohci
- case -EILSEQ: // uhci
+ case -EPROTO:
+ case -ETIME:
+ case -EILSEQ:
if (!timer_pending (&dev->delay)) {
mod_timer (&dev->delay,
jiffies + THROTTLE_JIFFIES);
skb_queue_head_init (&dev->done);
dev->bh.func = usbnet_bh;
dev->bh.data = (unsigned long) dev;
- INIT_WORK (&dev->kevent, kevent, dev);
+ INIT_WORK (&dev->kevent, kevent);
dev->delay.function = usbnet_bh;
dev->delay.data = (unsigned long) dev;
init_timer (&dev->delay);
+ mutex_init (&dev->phy_mutex);
SET_MODULE_OWNER (net);
dev->net = net;
// NOTE net->name still not usable ...
if (info->bind) {
status = info->bind (dev, udev);
+ if (status < 0)
+ goto out1;
+
// heuristic: "usb%d" for links we know are two-host,
// else "eth%d" when there's reasonable doubt. userspace
// can rename the link if it knows better.
if (status == 0 && dev->status)
status = init_status (dev, udev);
if (status < 0)
- goto out1;
+ goto out3;
if (!dev->rx_urb_size)
dev->rx_urb_size = dev->hard_mtu;
dev->maxpacket = usb_maxpacket (dev->udev, dev->out, 1);
-
+
SET_NETDEV_DEV(net, &udev->dev);
status = register_netdev (net);
if (status)
static int __init usbnet_init(void)
{
/* compiler should optimize this out */
- BUG_ON (sizeof (((struct sk_buff *)0)->cb)
+ BUILD_BUG_ON (sizeof (((struct sk_buff *)0)->cb)
< sizeof (struct skb_data));
random_ether_addr(node_id);
git://git.onelab.eu / linux-2.6.git / blobdiff