/*
* Version Information
*/
-#define DRIVER_VERSION "v1.4.2"
+#define DRIVER_VERSION "v1.4.3"
#define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>, Bill Ryder <bryder@sgi.com>, Kuba Ober <kuba@mareimbrium.org>"
#define DRIVER_DESC "USB FTDI Serial Converters Driver"
static int debug;
+static __u16 vendor = FTDI_VID;
+static __u16 product;
-static struct usb_device_id id_table_sio [] = {
- { USB_DEVICE(FTDI_VID, FTDI_SIO_PID) },
- { USB_DEVICE(MOBILITY_VID, MOBILITY_USB_SERIAL_PID) },
- { } /* Terminating entry */
+/* struct ftdi_sio_quirk is used by devices requiring special attention. */
+struct ftdi_sio_quirk {
+ void (*setup)(struct usb_serial *); /* Special settings during startup. */
+};
+
+static void ftdi_USB_UIRT_setup (struct usb_serial *serial);
+static void ftdi_HE_TIRA1_setup (struct usb_serial *serial);
+
+static struct ftdi_sio_quirk ftdi_USB_UIRT_quirk = {
+ .setup = ftdi_USB_UIRT_setup,
+};
+
+static struct ftdi_sio_quirk ftdi_HE_TIRA1_quirk = {
+ .setup = ftdi_HE_TIRA1_setup,
};
/*
* the bcdDevice value is used to differentiate FT232BM and FT245BM from
* the earlier FT8U232AM and FT8U232BM. For now, include all known VID/PID
* combinations in both tables.
- * FIXME: perhaps bcdDevice can also identify 12MHz devices, but I don't know
- * if those ever went into mass production. [Ian Abbott]
+ * FIXME: perhaps bcdDevice can also identify 12MHz FT8U232AM devices,
+ * but I don't know if those ever went into mass production. [Ian Abbott]
*/
-static struct usb_device_id id_table_8U232AM [] = {
- { USB_DEVICE_VER(FTDI_VID, FTDI_IRTRANS_PID, 0, 0x3ff) },
- { USB_DEVICE_VER(FTDI_VID, FTDI_8U232AM_PID, 0, 0x3ff) },
- { USB_DEVICE_VER(FTDI_VID, FTDI_8U232AM_ALT_PID, 0, 0x3ff) },
- { USB_DEVICE_VER(FTDI_VID, FTDI_RELAIS_PID, 0, 0x3ff) },
- { USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_IOBOARD_PID) },
- { USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_MINI_IOBOARD_PID) },
- { USB_DEVICE_VER(FTDI_NF_RIC_VID, FTDI_NF_RIC_PID, 0, 0x3ff) },
- { USB_DEVICE_VER(FTDI_VID, FTDI_XF_632_PID, 0, 0x3ff) },
- { USB_DEVICE_VER(FTDI_VID, FTDI_XF_634_PID, 0, 0x3ff) },
- { USB_DEVICE_VER(FTDI_VID, FTDI_XF_547_PID, 0, 0x3ff) },
- { USB_DEVICE_VER(FTDI_VID, FTDI_XF_633_PID, 0, 0x3ff) },
- { USB_DEVICE_VER(FTDI_VID, FTDI_XF_631_PID, 0, 0x3ff) },
- { USB_DEVICE_VER(FTDI_VID, FTDI_XF_635_PID, 0, 0x3ff) },
- { USB_DEVICE_VER(FTDI_VID, FTDI_XF_640_PID, 0, 0x3ff) },
- { USB_DEVICE_VER(FTDI_VID, FTDI_XF_642_PID, 0, 0x3ff) },
- { USB_DEVICE_VER(FTDI_VID, FTDI_VNHCPCUSB_D_PID, 0, 0x3ff) },
- { USB_DEVICE_VER(FTDI_VID, FTDI_DSS20_PID, 0, 0x3ff) },
- { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2101_PID, 0, 0x3ff) },
- { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2102_PID, 0, 0x3ff) },
- { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2103_PID, 0, 0x3ff) },
- { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2104_PID, 0, 0x3ff) },
- { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2201_1_PID, 0, 0x3ff) },
- { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2201_2_PID, 0, 0x3ff) },
- { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2202_1_PID, 0, 0x3ff) },
- { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2202_2_PID, 0, 0x3ff) },
- { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2203_1_PID, 0, 0x3ff) },
- { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2203_2_PID, 0, 0x3ff) },
- { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2401_1_PID, 0, 0x3ff) },
- { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2401_2_PID, 0, 0x3ff) },
- { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2401_3_PID, 0, 0x3ff) },
- { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2401_4_PID, 0, 0x3ff) },
- { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2402_1_PID, 0, 0x3ff) },
- { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2402_2_PID, 0, 0x3ff) },
- { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2402_3_PID, 0, 0x3ff) },
- { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2402_4_PID, 0, 0x3ff) },
- { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2403_1_PID, 0, 0x3ff) },
- { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2403_2_PID, 0, 0x3ff) },
- { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2403_3_PID, 0, 0x3ff) },
- { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2403_4_PID, 0, 0x3ff) },
- { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2801_1_PID, 0, 0x3ff) },
- { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2801_2_PID, 0, 0x3ff) },
- { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2801_3_PID, 0, 0x3ff) },
- { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2801_4_PID, 0, 0x3ff) },
- { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2801_5_PID, 0, 0x3ff) },
- { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2801_6_PID, 0, 0x3ff) },
- { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2801_7_PID, 0, 0x3ff) },
- { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2801_8_PID, 0, 0x3ff) },
- { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2802_1_PID, 0, 0x3ff) },
- { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2802_2_PID, 0, 0x3ff) },
- { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2802_3_PID, 0, 0x3ff) },
- { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2802_4_PID, 0, 0x3ff) },
- { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2802_5_PID, 0, 0x3ff) },
- { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2802_6_PID, 0, 0x3ff) },
- { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2802_7_PID, 0, 0x3ff) },
- { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2802_8_PID, 0, 0x3ff) },
- { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2803_1_PID, 0, 0x3ff) },
- { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2803_2_PID, 0, 0x3ff) },
- { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2803_3_PID, 0, 0x3ff) },
- { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2803_4_PID, 0, 0x3ff) },
- { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2803_5_PID, 0, 0x3ff) },
- { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2803_6_PID, 0, 0x3ff) },
- { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2803_7_PID, 0, 0x3ff) },
- { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2803_8_PID, 0, 0x3ff) },
- { USB_DEVICE_VER(IDTECH_VID, IDTECH_IDT1221U_PID, 0, 0x3ff) },
- { USB_DEVICE_VER(OCT_VID, OCT_US101_PID, 0, 0x3ff) },
- { USB_DEVICE_VER(FTDI_VID, PROTEGO_SPECIAL_1, 0, 0x3ff) },
- { USB_DEVICE_VER(FTDI_VID, PROTEGO_R2X0, 0, 0x3ff) },
- { USB_DEVICE_VER(FTDI_VID, PROTEGO_SPECIAL_3, 0, 0x3ff) },
- { USB_DEVICE_VER(FTDI_VID, PROTEGO_SPECIAL_4, 0, 0x3ff) },
- { USB_DEVICE_VER(FTDI_VID, FTDI_ELV_UO100_PID, 0, 0x3ff) },
- { USB_DEVICE_VER(FTDI_VID, FTDI_ELV_UM100_PID, 0, 0x3ff) },
- { USB_DEVICE_VER(FTDI_VID, INSIDE_ACCESSO, 0, 0x3ff) },
- { USB_DEVICE_VER(INTREPID_VID, INTREPID_VALUECAN_PID, 0, 0x3ff) },
- { USB_DEVICE_VER(INTREPID_VID, INTREPID_NEOVI_PID, 0, 0x3ff) },
- { USB_DEVICE_VER(FALCOM_VID, FALCOM_TWIST_PID, 0, 0x3ff) },
- { USB_DEVICE_VER(FTDI_VID, FTDI_SUUNTO_SPORTS_PID, 0, 0x3ff) },
- { USB_DEVICE_VER(FTDI_VID, FTDI_RM_CANVIEW_PID, 0, 0x3ff) },
- { USB_DEVICE_VER(BANDB_VID, BANDB_USOTL4_PID, 0, 0x3ff) },
- { USB_DEVICE_VER(BANDB_VID, BANDB_USTL4_PID, 0, 0x3ff) },
- { USB_DEVICE_VER(BANDB_VID, BANDB_USO9ML2_PID, 0, 0x3ff) },
- { USB_DEVICE_VER(FTDI_VID, EVER_ECO_PRO_CDS, 0, 0x3ff) },
- { USB_DEVICE_VER(FTDI_VID, FTDI_4N_GALAXY_DE_0_PID, 0, 0x3ff) },
- { USB_DEVICE_VER(FTDI_VID, FTDI_4N_GALAXY_DE_1_PID, 0, 0x3ff) },
- { USB_DEVICE_VER(FTDI_VID, FTDI_4N_GALAXY_DE_2_PID, 0, 0x3ff) },
- { } /* Terminating entry */
-};
-
-
-static struct usb_device_id id_table_FT232BM [] = {
- { USB_DEVICE_VER(FTDI_VID, FTDI_IRTRANS_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(FTDI_VID, FTDI_8U232AM_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(FTDI_VID, FTDI_8U232AM_ALT_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(FTDI_VID, FTDI_RELAIS_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(FTDI_NF_RIC_VID, FTDI_NF_RIC_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(FTDI_VID, FTDI_XF_632_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(FTDI_VID, FTDI_XF_634_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(FTDI_VID, FTDI_XF_547_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(FTDI_VID, FTDI_XF_633_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(FTDI_VID, FTDI_XF_631_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(FTDI_VID, FTDI_XF_635_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(FTDI_VID, FTDI_XF_640_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(FTDI_VID, FTDI_XF_642_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(FTDI_VID, FTDI_VNHCPCUSB_D_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(FTDI_VID, FTDI_DSS20_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(FTDI_VID, FTDI_MTXORB_0_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(FTDI_VID, FTDI_MTXORB_1_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(FTDI_VID, FTDI_MTXORB_2_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(FTDI_VID, FTDI_MTXORB_3_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(FTDI_VID, FTDI_MTXORB_4_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(FTDI_VID, FTDI_MTXORB_5_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(FTDI_VID, FTDI_MTXORB_6_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(FTDI_VID, FTDI_PERLE_ULTRAPORT_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(FTDI_VID, FTDI_PIEGROUP_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2101_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2102_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2103_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2104_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2201_1_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2201_2_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2202_1_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2202_2_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2203_1_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2203_2_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2401_1_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2401_2_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2401_3_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2401_4_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2402_1_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2402_2_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2402_3_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2402_4_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2403_1_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2403_2_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2403_3_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2403_4_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2801_1_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2801_2_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2801_3_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2801_4_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2801_5_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2801_6_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2801_7_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2801_8_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2802_1_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2802_2_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2802_3_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2802_4_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2802_5_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2802_6_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2802_7_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2802_8_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2803_1_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2803_2_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2803_3_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2803_4_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2803_5_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2803_6_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2803_7_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2803_8_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(IDTECH_VID, IDTECH_IDT1221U_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(OCT_VID, OCT_US101_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(FTDI_VID, PROTEGO_SPECIAL_1, 0x400, 0xffff) },
- { USB_DEVICE_VER(FTDI_VID, PROTEGO_R2X0, 0x400, 0xffff) },
- { USB_DEVICE_VER(FTDI_VID, PROTEGO_SPECIAL_3, 0x400, 0xffff) },
- { USB_DEVICE_VER(FTDI_VID, PROTEGO_SPECIAL_4, 0x400, 0xffff) },
- { USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E808_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E809_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E80A_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E80B_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E80C_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E80D_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E80E_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E80F_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E888_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E889_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E88A_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E88B_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E88C_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E88D_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E88E_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E88F_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(FTDI_VID, FTDI_ELV_UO100_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(FTDI_VID, FTDI_ELV_UM100_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(FTDI_VID, LINX_SDMUSBQSS_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(FTDI_VID, LINX_MASTERDEVEL2_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(FTDI_VID, LINX_FUTURE_0_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(FTDI_VID, LINX_FUTURE_1_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(FTDI_VID, LINX_FUTURE_2_PID, 0x400, 0xffff) },
- { USB_DEVICE(FTDI_VID, FTDI_CCSICDU20_0_PID) },
- { USB_DEVICE(FTDI_VID, FTDI_CCSICDU40_1_PID) },
- { USB_DEVICE_VER(FTDI_VID, INSIDE_ACCESSO, 0x400, 0xffff) },
- { USB_DEVICE_VER(INTREPID_VID, INTREPID_VALUECAN_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(INTREPID_VID, INTREPID_NEOVI_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(FALCOM_VID, FALCOM_TWIST_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(FTDI_VID, FTDI_SUUNTO_SPORTS_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(FTDI_VID, FTDI_RM_CANVIEW_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(BANDB_VID, BANDB_USOTL4_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(BANDB_VID, BANDB_USTL4_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(BANDB_VID, BANDB_USO9ML2_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(FTDI_VID, EVER_ECO_PRO_CDS, 0x400, 0xffff) },
- { USB_DEVICE_VER(FTDI_VID, FTDI_4N_GALAXY_DE_0_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(FTDI_VID, FTDI_4N_GALAXY_DE_1_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(FTDI_VID, FTDI_4N_GALAXY_DE_2_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(FTDI_VID, FTDI_ACTIVE_ROBOTS_PID, 0x400, 0xffff) },
- { } /* Terminating entry */
-};
-
-
-static struct usb_device_id id_table_USB_UIRT [] = {
- { USB_DEVICE(FTDI_VID, FTDI_USB_UIRT_PID) },
- { } /* Terminating entry */
-};
-
-
-static struct usb_device_id id_table_HE_TIRA1 [] = {
- { USB_DEVICE_VER(FTDI_VID, FTDI_HE_TIRA1_PID, 0x400, 0xffff) },
- { } /* Terminating entry */
-};
-
-
-static struct usb_device_id id_table_FT2232C[] = {
- { USB_DEVICE(FTDI_VID, FTDI_8U2232C_PID) },
- { } /* Terminating entry */
-};
-
static struct usb_device_id id_table_combined [] = {
+ { USB_DEVICE(FTDI_VID, FTDI_ACTZWAVE_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_IRTRANS_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_IPLUS_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_SIO_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_8U232AM_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_8U232AM_ALT_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_DSS20_PID) },
{ USB_DEVICE(FTDI_NF_RIC_VID, FTDI_NF_RIC_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_VNHCPCUSB_D_PID) },
- { USB_DEVICE_VER(FTDI_VID, FTDI_MTXORB_0_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(FTDI_VID, FTDI_MTXORB_1_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(FTDI_VID, FTDI_MTXORB_2_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(FTDI_VID, FTDI_MTXORB_3_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(FTDI_VID, FTDI_MTXORB_4_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(FTDI_VID, FTDI_MTXORB_5_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(FTDI_VID, FTDI_MTXORB_6_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(FTDI_VID, FTDI_PERLE_ULTRAPORT_PID, 0x400, 0xffff) },
+ { USB_DEVICE(FTDI_VID, FTDI_MTXORB_0_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_MTXORB_1_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_MTXORB_2_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_MTXORB_3_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_MTXORB_4_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_MTXORB_5_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_MTXORB_6_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_PERLE_ULTRAPORT_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_PIEGROUP_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2101_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2102_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_8_PID) },
{ USB_DEVICE(IDTECH_VID, IDTECH_IDT1221U_PID) },
{ USB_DEVICE(OCT_VID, OCT_US101_PID) },
- { USB_DEVICE_VER(FTDI_VID, FTDI_HE_TIRA1_PID, 0x400, 0xffff) },
- { USB_DEVICE(FTDI_VID, FTDI_USB_UIRT_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_HE_TIRA1_PID),
+ .driver_info = (kernel_ulong_t)&ftdi_HE_TIRA1_quirk },
+ { USB_DEVICE(FTDI_VID, FTDI_USB_UIRT_PID),
+ .driver_info = (kernel_ulong_t)&ftdi_USB_UIRT_quirk },
{ USB_DEVICE(FTDI_VID, PROTEGO_SPECIAL_1) },
{ USB_DEVICE(FTDI_VID, PROTEGO_R2X0) },
{ USB_DEVICE(FTDI_VID, PROTEGO_SPECIAL_3) },
{ USB_DEVICE(FTDI_VID, PROTEGO_SPECIAL_4) },
- { USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E808_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E809_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E80A_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E80B_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E80C_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E80D_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E80E_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E80F_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E888_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E889_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E88A_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E88B_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E88C_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E88D_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E88E_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E88F_PID, 0x400, 0xffff) },
+ { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E808_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E809_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E80A_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E80B_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E80C_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E80D_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E80E_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E80F_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E888_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E889_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E88A_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E88B_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E88C_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E88D_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E88E_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E88F_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_UO100_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_UM100_PID) },
- { USB_DEVICE_VER(FTDI_VID, LINX_SDMUSBQSS_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(FTDI_VID, LINX_MASTERDEVEL2_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(FTDI_VID, LINX_FUTURE_0_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(FTDI_VID, LINX_FUTURE_1_PID, 0x400, 0xffff) },
- { USB_DEVICE_VER(FTDI_VID, LINX_FUTURE_2_PID, 0x400, 0xffff) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_UR100_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_ALC8500_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_PYRAMID_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_FHZ1000PC_PID) },
+ /*
+ * These will probably use user-space drivers. Uncomment them if
+ * you need them or use the user-specified vendor/product module
+ * parameters (see ftdi_sio.h for the numbers). Make a fuss if
+ * you think the driver should recognize any of them by default.
+ */
+ /* { USB_DEVICE(FTDI_VID, FTDI_ELV_CLI7000_PID) }, */
+ /* { USB_DEVICE(FTDI_VID, FTDI_ELV_PPS7330_PID) }, */
+ /* { USB_DEVICE(FTDI_VID, FTDI_ELV_TFM100_PID) }, */
+ /* { USB_DEVICE(FTDI_VID, FTDI_ELV_UDF77_PID) }, */
+ /* { USB_DEVICE(FTDI_VID, FTDI_ELV_UIO88_PID) }, */
+ /* { USB_DEVICE(FTDI_VID, FTDI_ELV_UAD8_PID) }, */
+ /* { USB_DEVICE(FTDI_VID, FTDI_ELV_UDA7_PID) }, */
+ /* { USB_DEVICE(FTDI_VID, FTDI_ELV_USI2_PID) }, */
+ /* { USB_DEVICE(FTDI_VID, FTDI_ELV_T1100_PID) }, */
+ /* { USB_DEVICE(FTDI_VID, FTDI_ELV_PCD200_PID) }, */
+ /* { USB_DEVICE(FTDI_VID, FTDI_ELV_ULA200_PID) }, */
+ /* { USB_DEVICE(FTDI_VID, FTDI_ELV_CSI8_PID) }, */
+ /* { USB_DEVICE(FTDI_VID, FTDI_ELV_EM1000DL_PID) }, */
+ /* { USB_DEVICE(FTDI_VID, FTDI_ELV_PCK100_PID) }, */
+ /* { USB_DEVICE(FTDI_VID, FTDI_ELV_RFP500_PID) }, */
+ /* { USB_DEVICE(FTDI_VID, FTDI_ELV_FS20SIG_PID) }, */
+ /* { USB_DEVICE(FTDI_VID, FTDI_ELV_WS300PC_PID) }, */
+ /* { USB_DEVICE(FTDI_VID, FTDI_ELV_FHZ1300PC_PID) }, */
+ /* { USB_DEVICE(FTDI_VID, FTDI_ELV_WS500_PID) }, */
+ { USB_DEVICE(FTDI_VID, LINX_SDMUSBQSS_PID) },
+ { USB_DEVICE(FTDI_VID, LINX_MASTERDEVEL2_PID) },
+ { USB_DEVICE(FTDI_VID, LINX_FUTURE_0_PID) },
+ { USB_DEVICE(FTDI_VID, LINX_FUTURE_1_PID) },
+ { USB_DEVICE(FTDI_VID, LINX_FUTURE_2_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_CCSICDU20_0_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_CCSICDU40_1_PID) },
{ USB_DEVICE(FTDI_VID, INSIDE_ACCESSO) },
{ USB_DEVICE(INTREPID_VID, INTREPID_VALUECAN_PID) },
{ USB_DEVICE(INTREPID_VID, INTREPID_NEOVI_PID) },
{ USB_DEVICE(FALCOM_VID, FALCOM_TWIST_PID) },
+ { USB_DEVICE(FALCOM_VID, FALCOM_SAMBA_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_SUUNTO_SPORTS_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_RM_CANVIEW_PID) },
{ USB_DEVICE(BANDB_VID, BANDB_USOTL4_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_4N_GALAXY_DE_0_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_4N_GALAXY_DE_1_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_4N_GALAXY_DE_2_PID) },
+ { USB_DEVICE(FTDI_VID, XSENS_CONVERTER_0_PID) },
+ { USB_DEVICE(FTDI_VID, XSENS_CONVERTER_1_PID) },
+ { USB_DEVICE(FTDI_VID, XSENS_CONVERTER_2_PID) },
+ { USB_DEVICE(FTDI_VID, XSENS_CONVERTER_3_PID) },
+ { USB_DEVICE(FTDI_VID, XSENS_CONVERTER_4_PID) },
+ { USB_DEVICE(FTDI_VID, XSENS_CONVERTER_5_PID) },
+ { USB_DEVICE(FTDI_VID, XSENS_CONVERTER_6_PID) },
+ { USB_DEVICE(FTDI_VID, XSENS_CONVERTER_7_PID) },
{ USB_DEVICE(MOBILITY_VID, MOBILITY_USB_SERIAL_PID) },
- { USB_DEVICE_VER(FTDI_VID, FTDI_ACTIVE_ROBOTS_PID, 0x400, 0xffff) },
- { } /* Terminating entry */
+ { USB_DEVICE(FTDI_VID, FTDI_ACTIVE_ROBOTS_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_MHAM_KW_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_MHAM_YS_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_MHAM_Y6_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_MHAM_Y8_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_MHAM_IC_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_MHAM_DB9_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_MHAM_RS232_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_MHAM_Y9_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_TERATRONIK_VCP_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_TERATRONIK_D2XX_PID) },
+ { USB_DEVICE(EVOLUTION_VID, EVOLUTION_ER1_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ARTEMIS_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16C_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16HR_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16HRC_PID) },
+ { USB_DEVICE(KOBIL_VID, KOBIL_CONV_B1_PID) },
+ { USB_DEVICE(KOBIL_VID, KOBIL_CONV_KAAN_PID) },
+ { USB_DEVICE(POSIFLEX_VID, POSIFLEX_PP7000_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_TTUSB_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ECLO_COM_1WIRE_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_WESTREX_MODEL_777_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_WESTREX_MODEL_8900F_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_PCDJ_DAC2_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_RRCIRKITS_LOCOBUFFER_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ASK_RDR400_PID) },
+ { USB_DEVICE(ICOM_ID1_VID, ICOM_ID1_PID) },
+ { USB_DEVICE(PAPOUCH_VID, PAPOUCH_TMU_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ACG_HFDUAL_PID) },
+ { }, /* Optional parameter entry */
+ { } /* Terminating entry */
};
MODULE_DEVICE_TABLE (usb, id_table_combined);
.probe = usb_serial_probe,
.disconnect = usb_serial_disconnect,
.id_table = id_table_combined,
+ .no_dynamic_id = 1,
};
-static char *ftdi_chip_name[] = {
+static const char *ftdi_chip_name[] = {
[SIO] = "SIO", /* the serial part of FT8U100AX */
[FT8U232AM] = "FT8U232AM",
[FT232BM] = "FT232BM",
ASYNC_SPD_CUST | ASYNC_SPD_SHI | ASYNC_SPD_WARP )
/* function prototypes for a FTDI serial converter */
-static int ftdi_SIO_startup (struct usb_serial *serial);
-static int ftdi_8U232AM_startup (struct usb_serial *serial);
-static int ftdi_FT232BM_startup (struct usb_serial *serial);
-static int ftdi_FT2232C_startup (struct usb_serial *serial);
-static int ftdi_USB_UIRT_startup (struct usb_serial *serial);
-static int ftdi_HE_TIRA1_startup (struct usb_serial *serial);
+static int ftdi_sio_probe (struct usb_serial *serial, const struct usb_device_id *id);
+static int ftdi_sio_attach (struct usb_serial *serial);
static void ftdi_shutdown (struct usb_serial *serial);
static int ftdi_open (struct usb_serial_port *port, struct file *filp);
static void ftdi_close (struct usb_serial_port *port, struct file *filp);
static __u32 ftdi_232bm_baud_base_to_divisor (int baud, int base);
static __u32 ftdi_232bm_baud_to_divisor (int baud);
-static struct usb_serial_device_type ftdi_SIO_device = {
- .owner = THIS_MODULE,
- .name = "FTDI SIO",
- .id_table = id_table_sio,
+static struct usb_serial_driver ftdi_sio_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "ftdi_sio",
+ },
+ .description = "FTDI USB Serial Device",
+ .id_table = id_table_combined,
.num_interrupt_in = 0,
.num_bulk_in = 1,
.num_bulk_out = 1,
.num_ports = 1,
+ .probe = ftdi_sio_probe,
.open = ftdi_open,
.close = ftdi_close,
.throttle = ftdi_throttle,
.ioctl = ftdi_ioctl,
.set_termios = ftdi_set_termios,
.break_ctl = ftdi_break_ctl,
- .attach = ftdi_SIO_startup,
+ .attach = ftdi_sio_attach,
.shutdown = ftdi_shutdown,
};
-static struct usb_serial_device_type ftdi_8U232AM_device = {
- .owner = THIS_MODULE,
- .name = "FTDI 8U232AM Compatible",
- .id_table = id_table_8U232AM,
- .num_interrupt_in = 0,
- .num_bulk_in = 1,
- .num_bulk_out = 1,
- .num_ports = 1,
- .open = ftdi_open,
- .close = ftdi_close,
- .throttle = ftdi_throttle,
- .unthrottle = ftdi_unthrottle,
- .write = ftdi_write,
- .write_room = ftdi_write_room,
- .chars_in_buffer = ftdi_chars_in_buffer,
- .read_bulk_callback = ftdi_read_bulk_callback,
- .write_bulk_callback = ftdi_write_bulk_callback,
- .tiocmget = ftdi_tiocmget,
- .tiocmset = ftdi_tiocmset,
- .ioctl = ftdi_ioctl,
- .set_termios = ftdi_set_termios,
- .break_ctl = ftdi_break_ctl,
- .attach = ftdi_8U232AM_startup,
- .shutdown = ftdi_shutdown,
-};
-
-static struct usb_serial_device_type ftdi_FT232BM_device = {
- .owner = THIS_MODULE,
- .name = "FTDI FT232BM Compatible",
- .id_table = id_table_FT232BM,
- .num_interrupt_in = 0,
- .num_bulk_in = 1,
- .num_bulk_out = 1,
- .num_ports = 1,
- .open = ftdi_open,
- .close = ftdi_close,
- .throttle = ftdi_throttle,
- .unthrottle = ftdi_unthrottle,
- .write = ftdi_write,
- .write_room = ftdi_write_room,
- .chars_in_buffer = ftdi_chars_in_buffer,
- .read_bulk_callback = ftdi_read_bulk_callback,
- .write_bulk_callback = ftdi_write_bulk_callback,
- .tiocmget = ftdi_tiocmget,
- .tiocmset = ftdi_tiocmset,
- .ioctl = ftdi_ioctl,
- .set_termios = ftdi_set_termios,
- .break_ctl = ftdi_break_ctl,
- .attach = ftdi_FT232BM_startup,
- .shutdown = ftdi_shutdown,
-};
-
-static struct usb_serial_device_type ftdi_FT2232C_device = {
- .owner = THIS_MODULE,
- .name = "FTDI FT2232C Compatible",
- .id_table = id_table_FT2232C,
- .num_interrupt_in = 0,
- .num_bulk_in = 1,
- .num_bulk_out = 1,
- .num_ports = 1,
- .open = ftdi_open,
- .close = ftdi_close,
- .throttle = ftdi_throttle,
- .unthrottle = ftdi_unthrottle,
- .write = ftdi_write,
- .write_room = ftdi_write_room,
- .chars_in_buffer = ftdi_chars_in_buffer,
- .read_bulk_callback = ftdi_read_bulk_callback,
- .write_bulk_callback = ftdi_write_bulk_callback,
- .tiocmget = ftdi_tiocmget,
- .tiocmset = ftdi_tiocmset,
- .ioctl = ftdi_ioctl,
- .set_termios = ftdi_set_termios,
- .break_ctl = ftdi_break_ctl,
- .attach = ftdi_FT2232C_startup,
- .shutdown = ftdi_shutdown,
-};
-
-static struct usb_serial_device_type ftdi_USB_UIRT_device = {
- .owner = THIS_MODULE,
- .name = "USB-UIRT Infrared Tranceiver",
- .id_table = id_table_USB_UIRT,
- .num_interrupt_in = 0,
- .num_bulk_in = 1,
- .num_bulk_out = 1,
- .num_ports = 1,
- .open = ftdi_open,
- .close = ftdi_close,
- .throttle = ftdi_throttle,
- .unthrottle = ftdi_unthrottle,
- .write = ftdi_write,
- .write_room = ftdi_write_room,
- .chars_in_buffer = ftdi_chars_in_buffer,
- .read_bulk_callback = ftdi_read_bulk_callback,
- .write_bulk_callback = ftdi_write_bulk_callback,
- .tiocmget = ftdi_tiocmget,
- .tiocmset = ftdi_tiocmset,
- .ioctl = ftdi_ioctl,
- .set_termios = ftdi_set_termios,
- .break_ctl = ftdi_break_ctl,
- .attach = ftdi_USB_UIRT_startup,
- .shutdown = ftdi_shutdown,
-};
-
-/* The TIRA1 is based on a FT232BM which requires a fixed baud rate of 100000
- * and which requires RTS-CTS to be enabled. */
-static struct usb_serial_device_type ftdi_HE_TIRA1_device = {
- .owner = THIS_MODULE,
- .name = "Home-Electronics TIRA-1 IR Transceiver",
- .id_table = id_table_HE_TIRA1,
- .num_interrupt_in = 0,
- .num_bulk_in = 1,
- .num_bulk_out = 1,
- .num_ports = 1,
- .open = ftdi_open,
- .close = ftdi_close,
- .throttle = ftdi_throttle,
- .unthrottle = ftdi_unthrottle,
- .write = ftdi_write,
- .write_room = ftdi_write_room,
- .chars_in_buffer = ftdi_chars_in_buffer,
- .read_bulk_callback = ftdi_read_bulk_callback,
- .write_bulk_callback = ftdi_write_bulk_callback,
- .tiocmget = ftdi_tiocmget,
- .tiocmset = ftdi_tiocmset,
- .ioctl = ftdi_ioctl,
- .set_termios = ftdi_set_termios,
- .break_ctl = ftdi_break_ctl,
- .attach = ftdi_HE_TIRA1_startup,
- .shutdown = ftdi_shutdown,
-};
-
-
#define WDR_TIMEOUT 5000 /* default urb timeout */
+#define WDR_SHORT_TIMEOUT 1000 /* shorter urb timeout */
/* High and low are for DTR, RTS etc etc */
#define HIGH 1
return(ftdi_232bm_baud_base_to_divisor(baud, 48000000));
}
-static int set_rts(struct usb_serial_port *port, int high_or_low)
+#define set_mctrl(port, set) update_mctrl((port), (set), 0)
+#define clear_mctrl(port, clear) update_mctrl((port), 0, (clear))
+
+static int update_mctrl(struct usb_serial_port *port, unsigned int set, unsigned int clear)
{
struct ftdi_private *priv = usb_get_serial_port_data(port);
char *buf;
- unsigned ftdi_high_or_low;
+ unsigned urb_value;
int rv;
-
- buf = kmalloc(1, GFP_NOIO);
- if (!buf)
- return -ENOMEM;
-
- if (high_or_low) {
- ftdi_high_or_low = FTDI_SIO_SET_RTS_HIGH;
- priv->last_dtr_rts |= TIOCM_RTS;
- } else {
- ftdi_high_or_low = FTDI_SIO_SET_RTS_LOW;
- priv->last_dtr_rts &= ~TIOCM_RTS;
- }
- rv = usb_control_msg(port->serial->dev,
- usb_sndctrlpipe(port->serial->dev, 0),
- FTDI_SIO_SET_MODEM_CTRL_REQUEST,
- FTDI_SIO_SET_MODEM_CTRL_REQUEST_TYPE,
- ftdi_high_or_low, priv->interface,
- buf, 0, WDR_TIMEOUT);
-
- kfree(buf);
- return rv;
-}
+ if (((set | clear) & (TIOCM_DTR | TIOCM_RTS)) == 0) {
+ dbg("%s - DTR|RTS not being set|cleared", __FUNCTION__);
+ return 0; /* no change */
+ }
-static int set_dtr(struct usb_serial_port *port, int high_or_low)
-{
- struct ftdi_private *priv = usb_get_serial_port_data(port);
- char *buf;
- unsigned ftdi_high_or_low;
- int rv;
-
buf = kmalloc(1, GFP_NOIO);
- if (!buf)
+ if (!buf) {
return -ENOMEM;
-
- if (high_or_low) {
- ftdi_high_or_low = FTDI_SIO_SET_DTR_HIGH;
- priv->last_dtr_rts |= TIOCM_DTR;
- } else {
- ftdi_high_or_low = FTDI_SIO_SET_DTR_LOW;
- priv->last_dtr_rts &= ~TIOCM_DTR;
}
+
+ clear &= ~set; /* 'set' takes precedence over 'clear' */
+ urb_value = 0;
+ if (clear & TIOCM_DTR)
+ urb_value |= FTDI_SIO_SET_DTR_LOW;
+ if (clear & TIOCM_RTS)
+ urb_value |= FTDI_SIO_SET_RTS_LOW;
+ if (set & TIOCM_DTR)
+ urb_value |= FTDI_SIO_SET_DTR_HIGH;
+ if (set & TIOCM_RTS)
+ urb_value |= FTDI_SIO_SET_RTS_HIGH;
rv = usb_control_msg(port->serial->dev,
usb_sndctrlpipe(port->serial->dev, 0),
FTDI_SIO_SET_MODEM_CTRL_REQUEST,
FTDI_SIO_SET_MODEM_CTRL_REQUEST_TYPE,
- ftdi_high_or_low, priv->interface,
+ urb_value, priv->interface,
buf, 0, WDR_TIMEOUT);
kfree(buf);
+ if (rv < 0) {
+ err("%s Error from MODEM_CTRL urb: DTR %s, RTS %s",
+ __FUNCTION__,
+ (set & TIOCM_DTR) ? "HIGH" :
+ (clear & TIOCM_DTR) ? "LOW" : "unchanged",
+ (set & TIOCM_RTS) ? "HIGH" :
+ (clear & TIOCM_RTS) ? "LOW" : "unchanged");
+ } else {
+ dbg("%s - DTR %s, RTS %s", __FUNCTION__,
+ (set & TIOCM_DTR) ? "HIGH" :
+ (clear & TIOCM_DTR) ? "LOW" : "unchanged",
+ (set & TIOCM_RTS) ? "HIGH" :
+ (clear & TIOCM_RTS) ? "LOW" : "unchanged");
+ priv->last_dtr_rts = (priv->last_dtr_rts & ~clear) | set;
+ }
return rv;
}
FTDI_SIO_SET_BAUDRATE_REQUEST,
FTDI_SIO_SET_BAUDRATE_REQUEST_TYPE,
urb_value, urb_index,
- buf, 0, 100);
+ buf, 0, WDR_SHORT_TIMEOUT);
kfree(buf);
return rv;
} /* set_serial_info */
+/* Determine type of FTDI chip based on USB config and descriptor. */
+static void ftdi_determine_type(struct usb_serial_port *port)
+{
+ struct ftdi_private *priv = usb_get_serial_port_data(port);
+ struct usb_serial *serial = port->serial;
+ struct usb_device *udev = serial->dev;
+ unsigned version;
+ unsigned interfaces;
+
+ /* Assume it is not the original SIO device for now. */
+ priv->baud_base = 48000000 / 2;
+ priv->write_offset = 0;
+
+ version = le16_to_cpu(udev->descriptor.bcdDevice);
+ interfaces = udev->actconfig->desc.bNumInterfaces;
+ dbg("%s: bcdDevice = 0x%x, bNumInterfaces = %u", __FUNCTION__,
+ version, interfaces);
+ if (interfaces > 1) {
+ int inter;
+
+ /* Multiple interfaces. Assume FT2232C. */
+ priv->chip_type = FT2232C;
+ /* Determine interface code. */
+ inter = serial->interface->altsetting->desc.bInterfaceNumber;
+ if (inter == 0) {
+ priv->interface = PIT_SIOA;
+ } else {
+ priv->interface = PIT_SIOB;
+ }
+ /* BM-type devices have a bug where bcdDevice gets set
+ * to 0x200 when iSerialNumber is 0. */
+ if (version < 0x500) {
+ dbg("%s: something fishy - bcdDevice too low for multi-interface device",
+ __FUNCTION__);
+ }
+ } else if (version < 0x200) {
+ /* Old device. Assume its the original SIO. */
+ priv->chip_type = SIO;
+ priv->baud_base = 12000000 / 16;
+ priv->write_offset = 1;
+ } else if (version < 0x400) {
+ /* Assume its an FT8U232AM (or FT8U245AM) */
+ /* (It might be a BM because of the iSerialNumber bug,
+ * but it will still work as an AM device.) */
+ priv->chip_type = FT8U232AM;
+ } else {
+ /* Assume its an FT232BM (or FT245BM) */
+ priv->chip_type = FT232BM;
+ }
+ info("Detected %s", ftdi_chip_name[priv->chip_type]);
+}
+
+
/*
* ***************************************************************************
* Sysfs Attribute
* ***************************************************************************
*/
-static ssize_t show_latency_timer(struct device *dev, char *buf)
+static ssize_t show_latency_timer(struct device *dev, struct device_attribute *attr, char *buf)
{
struct usb_serial_port *port = to_usb_serial_port(dev);
struct ftdi_private *priv = usb_get_serial_port_data(port);
}
/* Write a new value of the latency timer, in units of milliseconds. */
-static ssize_t store_latency_timer(struct device *dev, const char *valbuf,
+static ssize_t store_latency_timer(struct device *dev, struct device_attribute *attr, const char *valbuf,
size_t count)
{
struct usb_serial_port *port = to_usb_serial_port(dev);
/* Write an event character directly to the FTDI register. The ASCII
value is in the low 8 bits, with the enable bit in the 9th bit. */
-static ssize_t store_event_char(struct device *dev, const char *valbuf,
+static ssize_t store_event_char(struct device *dev, struct device_attribute *attr, const char *valbuf,
size_t count)
{
struct usb_serial_port *port = to_usb_serial_port(dev);
* ***************************************************************************
*/
-/* Common startup subroutine */
-/* Called from ftdi_SIO_startup, etc. */
-static int ftdi_common_startup (struct usb_serial *serial)
+/* Probe function to check for special devices */
+static int ftdi_sio_probe (struct usb_serial *serial, const struct usb_device_id *id)
+{
+ usb_set_serial_data(serial, (void *)id->driver_info);
+
+ return (0);
+}
+
+/* attach subroutine */
+static int ftdi_sio_attach (struct usb_serial *serial)
{
struct usb_serial_port *port = serial->port[0];
struct ftdi_private *priv;
+ struct ftdi_sio_quirk *quirk;
dbg("%s",__FUNCTION__);
- priv = kmalloc(sizeof(struct ftdi_private), GFP_KERNEL);
+ priv = kzalloc(sizeof(struct ftdi_private), GFP_KERNEL);
if (!priv){
err("%s- kmalloc(%Zd) failed.", __FUNCTION__, sizeof(struct ftdi_private));
return -ENOMEM;
}
- memset(priv, 0, sizeof(*priv));
spin_lock_init(&priv->rx_lock);
init_waitqueue_head(&priv->delta_msr_wait);
port->bulk_out_buffer = NULL;
usb_set_serial_port_data(serial->port[0], priv);
-
- return (0);
-}
-
-
-/* Startup for the SIO chip */
-/* Called from usbserial:serial_probe */
-static int ftdi_SIO_startup (struct usb_serial *serial)
-{
- struct ftdi_private *priv;
- int err;
- dbg("%s",__FUNCTION__);
-
- err = ftdi_common_startup(serial);
- if (err){
- return (err);
- }
-
- priv = usb_get_serial_port_data(serial->port[0]);
- priv->chip_type = SIO;
- priv->baud_base = 12000000 / 16;
- priv->write_offset = 1;
-
- return (0);
-}
-
-/* Startup for the 8U232AM chip */
-/* Called from usbserial:serial_probe */
-static int ftdi_8U232AM_startup (struct usb_serial *serial)
-{ /* ftdi_8U232AM_startup */
- struct ftdi_private *priv;
- int err;
-
- dbg("%s",__FUNCTION__);
- err = ftdi_common_startup(serial);
- if (err){
- return (err);
- }
-
- priv = usb_get_serial_port_data(serial->port[0]);
- priv->chip_type = FT8U232AM;
- priv->baud_base = 48000000 / 2; /* Would be / 16, but FTDI supports 0.125, 0.25 and 0.5 divisor fractions! */
-
+ ftdi_determine_type (serial->port[0]);
create_sysfs_attrs(serial);
-
- return (0);
-} /* ftdi_8U232AM_startup */
-
-/* Startup for the FT232BM chip */
-/* Called from usbserial:serial_probe */
-static int ftdi_FT232BM_startup (struct usb_serial *serial)
-{ /* ftdi_FT232BM_startup */
- struct ftdi_private *priv;
- int err;
- dbg("%s",__FUNCTION__);
- err = ftdi_common_startup(serial);
- if (err){
- return (err);
+ /* Check for device requiring special set up. */
+ quirk = (struct ftdi_sio_quirk *)usb_get_serial_data(serial);
+ if (quirk && quirk->setup) {
+ quirk->setup(serial);
}
-
- priv = usb_get_serial_port_data(serial->port[0]);
- priv->chip_type = FT232BM;
- priv->baud_base = 48000000 / 2; /* Would be / 16, but FT232BM supports multiple of 0.125 divisor fractions! */
- create_sysfs_attrs(serial);
-
return (0);
-} /* ftdi_FT232BM_startup */
-
-/* Startup for the FT2232C chip */
-/* Called from usbserial:serial_probe */
-static int ftdi_FT2232C_startup (struct usb_serial *serial)
-{ /* ftdi_FT2232C_startup */
- struct ftdi_private *priv;
- int err;
- int inter;
-
- dbg("%s",__FUNCTION__);
- err = ftdi_common_startup(serial);
- if (err){
- return (err);
- }
+} /* ftdi_sio_attach */
- priv = usb_get_serial_port_data(serial->port[0]);
- priv->chip_type = FT2232C;
- inter = serial->interface->altsetting->desc.bInterfaceNumber;
- if (inter) {
- priv->interface = PIT_SIOB;
- }
- else {
- priv->interface = PIT_SIOA;
- }
- priv->baud_base = 48000000 / 2; /* Would be / 16, but FT2232C supports multiple of 0.125 divisor fractions! */
-
- create_sysfs_attrs(serial);
-
- return (0);
-} /* ftdi_FT2232C_startup */
-
-/* Startup for the USB-UIRT device, which requires hardwired baudrate (38400 gets mapped to 312500) */
+/* Setup for the USB-UIRT device, which requires hardwired
+ * baudrate (38400 gets mapped to 312500) */
/* Called from usbserial:serial_probe */
-static int ftdi_USB_UIRT_startup (struct usb_serial *serial)
-{ /* ftdi_USB_UIRT_startup */
+static void ftdi_USB_UIRT_setup (struct usb_serial *serial)
+{
struct ftdi_private *priv;
- int err;
dbg("%s",__FUNCTION__);
- err = ftdi_8U232AM_startup(serial);
- if (err){
- return (err);
- }
priv = usb_get_serial_port_data(serial->port[0]);
priv->flags |= ASYNC_SPD_CUST;
priv->custom_divisor = 77;
priv->force_baud = B38400;
-
- return (0);
-} /* ftdi_USB_UIRT_startup */
+} /* ftdi_USB_UIRT_setup */
-/* Startup for the HE-TIRA1 device, which requires hardwired
- * baudrate (38400 gets mapped to 100000) */
-static int ftdi_HE_TIRA1_startup (struct usb_serial *serial)
-{ /* ftdi_HE_TIRA1_startup */
+/* Setup for the HE-TIRA1 device, which requires hardwired
+ * baudrate (38400 gets mapped to 100000) and RTS-CTS enabled. */
+static void ftdi_HE_TIRA1_setup (struct usb_serial *serial)
+{
struct ftdi_private *priv;
- int err;
dbg("%s",__FUNCTION__);
- err = ftdi_FT232BM_startup(serial);
- if (err){
- return (err);
- }
priv = usb_get_serial_port_data(serial->port[0]);
priv->flags |= ASYNC_SPD_CUST;
priv->custom_divisor = 240;
priv->force_baud = B38400;
priv->force_rtscts = 1;
-
- return (0);
-} /* ftdi_HE_TIRA1_startup */
+} /* ftdi_HE_TIRA1_setup */
/* ftdi_shutdown is called from usbserial:usb_serial_disconnect
/* FIXME: Flow control might be enabled, so it should be checked -
we have no control of defaults! */
/* Turn on RTS and DTR since we are not flow controlling by default */
- if (set_dtr(port, HIGH) < 0) {
- err("%s Error from DTR HIGH urb", __FUNCTION__);
- }
- if (set_rts(port, HIGH) < 0){
- err("%s Error from RTS HIGH urb", __FUNCTION__);
- }
+ set_mctrl(port, TIOCM_DTR | TIOCM_RTS);
/* Not throttled */
spin_lock_irqsave(&priv->rx_lock, flags);
err("error from flowcontrol urb");
}
- /* drop DTR */
- if (set_dtr(port, LOW) < 0){
- err("Error from DTR LOW urb");
- }
- /* drop RTS */
- if (set_rts(port, LOW) < 0) {
- err("Error from RTS LOW urb");
- }
+ /* drop RTS and DTR */
+ clear_mctrl(port, TIOCM_DTR | TIOCM_RTS);
} /* Note change no line if hupcl is off */
/* cancel any scheduled reading */
length = 0;
}
- /* have to make sure we don't overflow the buffer
- with tty_insert_flip_char's */
- if (tty->flip.count+length > TTY_FLIPBUF_SIZE) {
- tty_flip_buffer_push(tty);
- need_flip = 0;
-
- if (tty->flip.count != 0) {
- /* flip didn't work, this happens when ftdi_process_read() is
- * called from ftdi_unthrottle, because TTY_DONT_FLIP is set */
- dbg("%s - flip buffer push failed", __FUNCTION__);
- break;
- }
- }
if (priv->rx_flags & THROTTLED) {
dbg("%s - throttled", __FUNCTION__);
break;
}
- if (tty->ldisc.receive_room(tty)-tty->flip.count < length) {
+ if (tty_buffer_request_room(tty, length) < length) {
/* break out & wait for throttling/unthrottling to happen */
dbg("%s - receive room low", __FUNCTION__);
break;
FTDI_SIO_SET_DATA_REQUEST,
FTDI_SIO_SET_DATA_REQUEST_TYPE,
urb_value , priv->interface,
- buf, 0, 100) < 0) {
+ buf, 0, WDR_SHORT_TIMEOUT) < 0) {
err("%s FAILED to set databits/stopbits/parity", __FUNCTION__);
}
err("%s error from disable flowcontrol urb", __FUNCTION__);
}
/* Drop RTS and DTR */
- if (set_dtr(port, LOW) < 0){
- err("%s Error from DTR LOW urb", __FUNCTION__);
- }
- if (set_rts(port, LOW) < 0){
- err("%s Error from RTS LOW urb", __FUNCTION__);
- }
-
+ clear_mctrl(port, TIOCM_DTR | TIOCM_RTS);
} else {
/* set the baudrate determined before */
if (change_speed(port)) {
- err("%s urb failed to set baurdrate", __FUNCTION__);
+ err("%s urb failed to set baudrate", __FUNCTION__);
}
- /* Ensure RTS and DTR are raised */
- else if (set_dtr(port, HIGH) < 0){
- err("%s Error from DTR HIGH urb", __FUNCTION__);
+ /* Ensure RTS and DTR are raised when baudrate changed from 0 */
+ if ((old_termios->c_cflag & CBAUD) == B0) {
+ set_mctrl(port, TIOCM_DTR | TIOCM_RTS);
}
- else if (set_rts(port, HIGH) < 0){
- err("%s Error from RTS HIGH urb", __FUNCTION__);
- }
}
/* Set flow control */
static int ftdi_tiocmset(struct usb_serial_port *port, struct file * file, unsigned int set, unsigned int clear)
{
- int ret;
-
dbg("%s TIOCMSET", __FUNCTION__);
- if (set & TIOCM_DTR){
- if ((ret = set_dtr(port, HIGH)) < 0) {
- err("Urb to set DTR failed");
- return(ret);
- }
- }
- if (set & TIOCM_RTS) {
- if ((ret = set_rts(port, HIGH)) < 0){
- err("Urb to set RTS failed");
- return(ret);
- }
- }
-
- if (clear & TIOCM_DTR){
- if ((ret = set_dtr(port, LOW)) < 0){
- err("Urb to unset DTR failed");
- return(ret);
- }
- }
- if (clear & TIOCM_RTS) {
- if ((ret = set_rts(port, LOW)) < 0){
- err("Urb to unset RTS failed");
- return(ret);
- }
- }
- return(0);
+ return update_mctrl(port, set, clear);
}
{
struct ftdi_private *priv = usb_get_serial_port_data(port);
- int ret, mask;
-
dbg("%s cmd 0x%04x", __FUNCTION__, cmd);
/* Based on code from acm.c and others */
switch (cmd) {
- case TIOCMBIS: /* turns on (Sets) the lines as specified by the mask */
- dbg("%s TIOCMBIS", __FUNCTION__);
- if (get_user(mask, (unsigned long __user *) arg))
- return -EFAULT;
- if (mask & TIOCM_DTR){
- if ((ret = set_dtr(port, HIGH)) < 0) {
- err("Urb to set DTR failed");
- return(ret);
- }
- }
- if (mask & TIOCM_RTS) {
- if ((ret = set_rts(port, HIGH)) < 0){
- err("Urb to set RTS failed");
- return(ret);
- }
- }
- return(0);
- break;
-
- case TIOCMBIC: /* turns off (Clears) the lines as specified by the mask */
- dbg("%s TIOCMBIC", __FUNCTION__);
- if (get_user(mask, (unsigned long __user *) arg))
- return -EFAULT;
- if (mask & TIOCM_DTR){
- if ((ret = set_dtr(port, LOW)) < 0){
- err("Urb to unset DTR failed");
- return(ret);
- }
- }
- if (mask & TIOCM_RTS) {
- if ((ret = set_rts(port, LOW)) < 0){
- err("Urb to unset RTS failed");
- return(ret);
- }
- }
- return(0);
- break;
-
- /*
- * I had originally implemented TCSET{A,S}{,F,W} and
- * TCGET{A,S} here separately, however when testing I
- * found that the higher layers actually do the termios
- * conversions themselves and pass the call onto
- * ftdi_sio_set_termios.
- *
- */
-
case TIOCGSERIAL: /* gets serial port data */
return get_serial_info(port, (struct serial_struct __user *) arg);
int retval;
dbg("%s", __FUNCTION__);
- retval = usb_serial_register(&ftdi_SIO_device);
- if (retval)
- goto failed_SIO_register;
- retval = usb_serial_register(&ftdi_8U232AM_device);
- if (retval)
- goto failed_8U232AM_register;
- retval = usb_serial_register(&ftdi_FT232BM_device);
- if (retval)
- goto failed_FT232BM_register;
- retval = usb_serial_register(&ftdi_FT2232C_device);
- if (retval)
- goto failed_FT2232C_register;
- retval = usb_serial_register(&ftdi_USB_UIRT_device);
- if (retval)
- goto failed_USB_UIRT_register;
- retval = usb_serial_register(&ftdi_HE_TIRA1_device);
+ if (vendor > 0 && product > 0) {
+ /* Add user specified VID/PID to reserved element of table. */
+ int i;
+ for (i = 0; id_table_combined[i].idVendor; i++)
+ ;
+ id_table_combined[i].match_flags = USB_DEVICE_ID_MATCH_DEVICE;
+ id_table_combined[i].idVendor = vendor;
+ id_table_combined[i].idProduct = product;
+ }
+ retval = usb_serial_register(&ftdi_sio_device);
if (retval)
- goto failed_HE_TIRA1_register;
+ goto failed_sio_register;
retval = usb_register(&ftdi_driver);
if (retval)
goto failed_usb_register;
info(DRIVER_VERSION ":" DRIVER_DESC);
return 0;
failed_usb_register:
- usb_serial_deregister(&ftdi_HE_TIRA1_device);
-failed_HE_TIRA1_register:
- usb_serial_deregister(&ftdi_USB_UIRT_device);
-failed_USB_UIRT_register:
- usb_serial_deregister(&ftdi_FT2232C_device);
-failed_FT2232C_register:
- usb_serial_deregister(&ftdi_FT232BM_device);
-failed_FT232BM_register:
- usb_serial_deregister(&ftdi_8U232AM_device);
-failed_8U232AM_register:
- usb_serial_deregister(&ftdi_SIO_device);
-failed_SIO_register:
+ usb_serial_deregister(&ftdi_sio_device);
+failed_sio_register:
return retval;
}
dbg("%s", __FUNCTION__);
usb_deregister (&ftdi_driver);
- usb_serial_deregister (&ftdi_HE_TIRA1_device);
- usb_serial_deregister (&ftdi_USB_UIRT_device);
- usb_serial_deregister (&ftdi_FT2232C_device);
- usb_serial_deregister (&ftdi_FT232BM_device);
- usb_serial_deregister (&ftdi_8U232AM_device);
- usb_serial_deregister (&ftdi_SIO_device);
+ usb_serial_deregister (&ftdi_sio_device);
}
module_param(debug, bool, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(debug, "Debug enabled or not");
+module_param(vendor, ushort, 0);
+MODULE_PARM_DESC(vendor, "User specified vendor ID (default="
+ __MODULE_STRING(FTDI_VID)")");
+module_param(product, ushort, 0);
+MODULE_PARM_DESC(vendor, "User specified product ID");
git://git.onelab.eu / linux-2.6.git / blobdiff