* @address_type: Can read both XDATA and I2C
* @buffer: pointer to input data buffer
*/
-int TIReadDownloadMemory (struct usb_device *dev, int start_address, int length,
- __u8 address_type, __u8 *buffer)
+static int TIReadDownloadMemory(struct usb_device *dev, int start_address,
+ int length, __u8 address_type, __u8 *buffer)
{
int status = 0;
__u8 read_length;
return status;
}
-int TIReadRam (struct usb_device *dev, int start_address, int length, __u8 *buffer)
+static int TIReadRam (struct usb_device *dev, int start_address, int length, __u8 *buffer)
{
return TIReadDownloadMemory (dev,
start_address,
break;
/* Block the thread for 10ms */
- wait_ms (10);
+ msleep(10);
if (last_count == port->tx.count) {
/* No activity.. count down. */
/* This function takes 4 ms; */
if (!TIIsTxActive (port)) {
/* Delay a few char times */
- wait_ms (50);
+ msleep(50);
dbg ("%s - Empty", __FUNCTION__);
return;
}
return 0;
}
-int TIReadRom (struct edgeport_serial *serial, int start_address, int length, __u8 *buffer)
+static int TIReadRom (struct edgeport_serial *serial, int start_address, int length, __u8 *buffer)
{
int status;
return status;
}
-int TIWriteRom (struct edgeport_serial *serial, int start_address, int length, __u8 *buffer)
+static int TIWriteRom (struct edgeport_serial *serial, int start_address, int length, __u8 *buffer)
{
if (serial->product_info.TiMode == TI_MODE_BOOT)
return TIWriteBootMemory (serial,
if (status)
return status;
- interface = &serial->serial->dev->config->interface[0]->altsetting->desc;
+ interface = &serial->serial->interface->cur_altsetting->desc;
if (!interface) {
dev_err (&serial->serial->dev->dev, "%s - no interface set, error!", __FUNCTION__);
return -ENODEV;
dbg("%s", __FUNCTION__);
- if (serial_paranoia_check (edge_serial->serial, __FUNCTION__)) {
- return;
- }
-
switch (urb->status) {
case 0:
/* success */
dbg ("%s - port_number %d, function %d, info 0x%x",
__FUNCTION__, port_number, function, data[1]);
port = edge_serial->serial->port[port_number];
- if (port_paranoia_check (port, __FUNCTION__)) {
- dbg ("%s - change found for port that is not present",
- __FUNCTION__);
- return;
- }
edge_port = usb_get_serial_port_data(port);
if (!edge_port) {
dbg ("%s - edge_port not found", __FUNCTION__);
dbg("%s", __FUNCTION__);
- if (port_paranoia_check (edge_port->port, __FUNCTION__))
- return;
-
if (urb->status) {
dbg ("%s - nonzero read bulk status received: %d",
__FUNCTION__, urb->status);
static void edge_bulk_out_callback (struct urb *urb, struct pt_regs *regs)
{
struct usb_serial_port *port = (struct usb_serial_port *)urb->context;
- struct usb_serial *serial = get_usb_serial (port, __FUNCTION__);
struct tty_struct *tty;
dbg ("%s - port %d", __FUNCTION__, port->number);
- if (!serial) {
- dbg ("%s - bad serial pointer, exiting", __FUNCTION__);
- return;
- }
-
if (urb->status) {
dbg ("%s - nonzero write bulk status received: %d",
__FUNCTION__, urb->status);
if (urb->status == -EPIPE) {
/* clear any problem that might have happened on this pipe */
- usb_clear_halt (serial->dev, urb->pipe);
+ usb_clear_halt (port->serial->dev, urb->pipe);
}
return;
}
u16 open_settings;
u8 transaction_timeout;
- if (port_paranoia_check (port, __FUNCTION__))
- return -ENODEV;
-
dbg("%s - port %d", __FUNCTION__, port->number);
if (edge_port == NULL)
static void edge_close (struct usb_serial_port *port, struct file * filp)
{
- struct usb_serial *serial;
struct edgeport_serial *edge_serial;
struct edgeport_port *edge_port;
int port_number;
int status;
- if (port_paranoia_check (port, __FUNCTION__))
- return;
-
dbg("%s - port %d", __FUNCTION__, port->number);
- serial = get_usb_serial (port, __FUNCTION__);
- if (!serial)
- return;
-
- edge_serial = usb_get_serial_data(serial);
+ edge_serial = usb_get_serial_data(port->serial);
edge_port = usb_get_serial_port_data(port);
if ((edge_serial == NULL) || (edge_port == NULL))
return;
- if (serial->dev) {
- /* The bulkreadcompletion routine will check
- * this flag and dump add read data */
- edge_port->close_pending = 1;
-
- /* chase the port close */
- TIChasePort (edge_port);
-
- usb_unlink_urb (port->read_urb);
-
- /* assuming we can still talk to the device,
- * send a close port command to it */
- dbg("%s - send umpc_close_port", __FUNCTION__);
- port_number = port->number - port->serial->minor;
- status = TIWriteCommandSync (port->serial->dev,
- UMPC_CLOSE_PORT,
- (__u8)(UMPM_UART1_PORT + port_number),
- 0,
- NULL,
- 0);
- --edge_port->edge_serial->num_ports_open;
- if (edge_port->edge_serial->num_ports_open <= 0) {
- /* last port is now closed, let's shut down our interrupt urb */
- usb_unlink_urb (serial->port[0]->interrupt_in_urb);
- edge_port->edge_serial->num_ports_open = 0;
- }
- edge_port->close_pending = 0;
+ /* The bulkreadcompletion routine will check
+ * this flag and dump add read data */
+ edge_port->close_pending = 1;
+
+ /* chase the port close */
+ TIChasePort (edge_port);
+
+ usb_unlink_urb (port->read_urb);
+
+ /* assuming we can still talk to the device,
+ * send a close port command to it */
+ dbg("%s - send umpc_close_port", __FUNCTION__);
+ port_number = port->number - port->serial->minor;
+ status = TIWriteCommandSync (port->serial->dev,
+ UMPC_CLOSE_PORT,
+ (__u8)(UMPM_UART1_PORT + port_number),
+ 0,
+ NULL,
+ 0);
+ --edge_port->edge_serial->num_ports_open;
+ if (edge_port->edge_serial->num_ports_open <= 0) {
+ /* last port is now closed, let's shut down our interrupt urb */
+ usb_unlink_urb (port->serial->port[0]->interrupt_in_urb);
+ edge_port->edge_serial->num_ports_open = 0;
}
+ edge_port->close_pending = 0;
dbg("%s - exited", __FUNCTION__);
}
static int edge_write (struct usb_serial_port *port, int from_user, const unsigned char *data, int count)
{
- struct usb_serial *serial = port->serial;
struct edgeport_port *edge_port = usb_get_serial_port_data(port);
int result;
usb_serial_debug_data (__FILE__, __FUNCTION__, count, port->write_urb->transfer_buffer);
/* set up our urb */
- usb_fill_bulk_urb (port->write_urb, serial->dev,
- usb_sndbulkpipe (serial->dev,
+ usb_fill_bulk_urb (port->write_urb, port->serial->dev,
+ usb_sndbulkpipe (port->serial->dev,
port->bulk_out_endpointAddress),
port->write_urb->transfer_buffer, count,
edge_bulk_out_callback,
git://git.onelab.eu / linux-2.6.git / blobdiff