*
* Current development and maintenance by:
* (c) 2000 Robert Baruch (autophile@dol.net)
+ * (c) 2004, 2005 Daniel Drake <dsd@gentoo.org>
*
- * See scm.c for more explanation
+ * See shuttle_usbat.c for more explanation
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
#ifndef _USB_SHUTTLE_USBAT_H
#define _USB_SHUTTLE_USBAT_H
+/* Supported device types */
+#define USBAT_DEV_HP8200 0x01
+#define USBAT_DEV_FLASH 0x02
+
#define USBAT_EPP_PORT 0x10
#define USBAT_EPP_REGISTER 0x30
#define USBAT_ATA 0x40
#define USBAT_ISA 0x50
-/* SCM User I/O Data registers */
+/* Commands (need to be logically OR'd with an access type */
+#define USBAT_CMD_READ_REG 0x00
+#define USBAT_CMD_WRITE_REG 0x01
+#define USBAT_CMD_READ_BLOCK 0x02
+#define USBAT_CMD_WRITE_BLOCK 0x03
+#define USBAT_CMD_COND_READ_BLOCK 0x04
+#define USBAT_CMD_COND_WRITE_BLOCK 0x05
+#define USBAT_CMD_WRITE_REGS 0x07
+
+/* Commands (these don't need an access type) */
+#define USBAT_CMD_EXEC_CMD 0x80
+#define USBAT_CMD_SET_FEAT 0x81
+#define USBAT_CMD_UIO 0x82
+
+/* Methods of accessing UIO register */
+#define USBAT_UIO_READ 1
+#define USBAT_UIO_WRITE 0
+
+/* Qualifier bits */
+#define USBAT_QUAL_FCQ 0x20 // full compare
+#define USBAT_QUAL_ALQ 0x10 // auto load subcount
+
+/* USBAT Flash Media status types */
+#define USBAT_FLASH_MEDIA_NONE 0
+#define USBAT_FLASH_MEDIA_CF 1
+
+/* USBAT Flash Media change types */
+#define USBAT_FLASH_MEDIA_SAME 0
+#define USBAT_FLASH_MEDIA_CHANGED 1
+/* USBAT ATA registers */
+#define USBAT_ATA_DATA 0x10 // read/write data (R/W)
+#define USBAT_ATA_FEATURES 0x11 // set features (W)
+#define USBAT_ATA_ERROR 0x11 // error (R)
+#define USBAT_ATA_SECCNT 0x12 // sector count (R/W)
+#define USBAT_ATA_SECNUM 0x13 // sector number (R/W)
+#define USBAT_ATA_LBA_ME 0x14 // cylinder low (R/W)
+#define USBAT_ATA_LBA_HI 0x15 // cylinder high (R/W)
+#define USBAT_ATA_DEVICE 0x16 // head/device selection (R/W)
+#define USBAT_ATA_STATUS 0x17 // device status (R)
+#define USBAT_ATA_CMD 0x17 // device command (W)
+#define USBAT_ATA_ALTSTATUS 0x0E // status (no clear IRQ) (R)
+
+/* USBAT User I/O Data registers */
#define USBAT_UIO_EPAD 0x80 // Enable Peripheral Control Signals
#define USBAT_UIO_CDT 0x40 // Card Detect (Read Only)
// CDT = ACKD & !UI1 & !UI0
#define USBAT_UIO_UI0 0x02 // Input 0
#define USBAT_UIO_INTR_ACK 0x01 // Interrupt (ATA & ISA)/Acknowledge (EPP)
-/* SCM User I/O Enable registers */
-
+/* USBAT User I/O Enable registers */
#define USBAT_UIO_DRVRST 0x80 // Reset Peripheral
#define USBAT_UIO_ACKD 0x40 // Enable Card Detect
#define USBAT_UIO_OE1 0x20 // I/O 1 set=output/clr=input
#define USBAT_UIO_OE0 0x10 // I/O 0 set=output/clr=input
#define USBAT_UIO_ADPRST 0x01 // Reset SCM chip
-/* HP 8200e stuff */
-extern int hp8200e_transport(struct scsi_cmnd *srb, struct us_data *us);
-extern int init_8200e(struct us_data *us);
+/* USBAT Features */
+#define USBAT_FEAT_ETEN 0x80 // External trigger enable
+#define USBAT_FEAT_U1 0x08
+#define USBAT_FEAT_U0 0x04
+#define USBAT_FEAT_ET1 0x02
+#define USBAT_FEAT_ET2 0x01
+
+extern int usbat_transport(struct scsi_cmnd *srb, struct us_data *us);
+extern int init_usbat(struct us_data *us);
+
+struct usbat_info {
+ int devicetype;
+
+ /* Used for Flash readers only */
+ unsigned long sectors; // total sector count
+ unsigned long ssize; // sector size in bytes
+
+ unsigned char sense_key;
+ unsigned long sense_asc; // additional sense code
+ unsigned long sense_ascq; // additional sense code qualifier
+};
#endif