#include <linux/pci.h>
#include <linux/vmalloc.h>
#include <linux/device.h>
-#include <linux/i2c.h>
#include <asm/io.h>
#include <asm/uaccess.h>
/* Radeon VE/7000 */
CHIP_DEF(PCI_CHIP_RV100_QY, RV100, CHIP_HAS_CRTC2),
CHIP_DEF(PCI_CHIP_RV100_QZ, RV100, CHIP_HAS_CRTC2),
+ CHIP_DEF(PCI_CHIP_RN50, RV100, CHIP_HAS_CRTC2),
/* Radeon IGP320M (U1) */
CHIP_DEF(PCI_CHIP_RS100_4336, RS100, CHIP_HAS_CRTC2 | CHIP_IS_IGP | CHIP_IS_MOBILITY),
/* Radeon IGP320 (A3) */
#ifdef CONFIG_MTRR
static int nomtrr = 0;
#endif
+#if defined(CONFIG_PM) && defined(CONFIG_X86)
+int radeon_force_sleep = 0;
+#endif
/*
* prototypes
/* Very simple test to make sure it appeared */
if (BIOS_IN16(0) != 0xaa55) {
- printk(KERN_ERR "radeonfb (%s): Invalid ROM signature %x should be"
- "0xaa55\n", pci_name(rinfo->pdev), BIOS_IN16(0));
+ printk(KERN_DEBUG "radeonfb (%s): Invalid ROM signature %x "
+ "should be 0xaa55\n",
+ pci_name(rinfo->pdev), BIOS_IN16(0));
goto failed;
}
/* Look for the PCI data to check the ROM type */
*/
/* Flush PCI buffers ? */
- tmp = INREG(DEVICE_ID);
+ tmp = INREG16(DEVICE_ID);
local_irq_disable();
}
/*
- * Retreive PLL infos by different means (BIOS, Open Firmware, register probing...)
+ * Retrieve PLL infos by different means (BIOS, Open Firmware, register probing...)
*/
static void __devinit radeon_get_pllinfo(struct radeonfb_info *rinfo)
{
#ifdef CONFIG_PPC_OF
/*
- * Retreive PLL infos from Open Firmware first
+ * Retrieve PLL infos from Open Firmware first
*/
if (!force_measure_pll && radeon_read_xtal_OF(rinfo) == 0) {
- printk(KERN_INFO "radeonfb: Retreived PLL infos from Open Firmware\n");
+ printk(KERN_INFO "radeonfb: Retrieved PLL infos from Open Firmware\n");
goto found;
}
#endif /* CONFIG_PPC_OF */
/*
* Check out if we have an X86 which gave us some PLL informations
- * and if yes, retreive them
+ * and if yes, retrieve them
*/
if (!force_measure_pll && rinfo->bios_seg) {
u16 pll_info_block = BIOS_IN16(rinfo->fp_bios_start + 0x30);
rinfo->pll.ppll_min = BIOS_IN32(pll_info_block + 0x12);
rinfo->pll.ppll_max = BIOS_IN32(pll_info_block + 0x16);
- printk(KERN_INFO "radeonfb: Retreived PLL infos from BIOS\n");
+ printk(KERN_INFO "radeonfb: Retrieved PLL infos from BIOS\n");
goto found;
}
* probe them
*/
if (radeon_probe_pll_params(rinfo) == 0) {
- printk(KERN_INFO "radeonfb: Retreived PLL infos from registers\n");
+ printk(KERN_INFO "radeonfb: Retrieved PLL infos from registers\n");
goto found;
}
found:
/*
- * Some methods fail to retreive SCLK and MCLK values, we apply default
+ * Some methods fail to retrieve SCLK and MCLK values, we apply default
* settings in this case (200Mhz). If that really happne often, we could
* fetch from registers instead...
*/
}
-static int radeonfb_ioctl (struct inode *inode, struct file *file, unsigned int cmd,
- unsigned long arg, struct fb_info *info)
+static int radeonfb_ioctl (struct fb_info *info, unsigned int cmd,
+ unsigned long arg)
{
struct radeonfb_info *rinfo = info->par;
unsigned int tmp;
if (regno > 255)
- return 1;
+ return -EINVAL;
red >>= 8;
green >>= 8;
pindex = regno * 8;
if (rinfo->depth == 16 && regno > 63)
- return 1;
+ return -EINVAL;
if (rinfo->depth == 15 && regno > 31)
- return 1;
+ return -EINVAL;
/* For 565, the green component is mixed one order
* below
.fb_fillrect = radeonfb_fillrect,
.fb_copyarea = radeonfb_copyarea,
.fb_imageblit = radeonfb_imageblit,
- .fb_cursor = soft_cursor,
};
};
-static int radeonfb_pci_register (struct pci_dev *pdev,
+static int __devinit radeonfb_pci_register (struct pci_dev *pdev,
const struct pci_device_id *ent)
{
struct fb_info *info;
rinfo->mmio_base_phys = pci_resource_start (pdev, 2);
/* request the mem regions */
- ret = pci_request_regions(pdev, "radeonfb");
+ ret = pci_request_region(pdev, 0, "radeonfb framebuffer");
if (ret < 0) {
- printk( KERN_ERR "radeonfb (%s): cannot reserve PCI regions."
- " Someone already got them?\n", pci_name(rinfo->pdev));
+ printk( KERN_ERR "radeonfb (%s): cannot request region 0.\n",
+ pci_name(rinfo->pdev));
goto err_release_fb;
}
+ ret = pci_request_region(pdev, 2, "radeonfb mmio");
+ if (ret < 0) {
+ printk( KERN_ERR "radeonfb (%s): cannot request region 2.\n",
+ pci_name(rinfo->pdev));
+ goto err_release_pci0;
+ }
+
/* map the regions */
rinfo->mmio_base = ioremap(rinfo->mmio_base_phys, RADEON_REGSIZE);
if (!rinfo->mmio_base) {
- printk(KERN_ERR "radeonfb (%s): cannot map MMIO\n", pci_name(rinfo->pdev));
+ printk(KERN_ERR "radeonfb (%s): cannot map MMIO\n",
+ pci_name(rinfo->pdev));
ret = -EIO;
- goto err_release_pci;
+ goto err_release_pci2;
}
rinfo->fb_local_base = INREG(MC_FB_LOCATION) << 16;
rinfo->mapped_vram/1024);
/*
- * Map the BIOS ROM if any and retreive PLL parameters from
+ * Map the BIOS ROM if any and retrieve PLL parameters from
* the BIOS. We skip that on mobility chips as the real panel
* values we need aren't in the ROM but in the BIOS image in
* memory. This is definitely not the best meacnism though,
if (rinfo->bios_seg)
radeon_unmap_ROM(rinfo, pdev);
iounmap(rinfo->mmio_base);
-err_release_pci:
- pci_release_regions(pdev);
+err_release_pci2:
+ pci_release_region(pdev, 2);
+err_release_pci0:
+ pci_release_region(pdev, 0);
err_release_fb:
- framebuffer_release(info);
+ framebuffer_release(info);
err_disable:
pci_disable_device(pdev);
err_out:
radeonfb_pm_exit(rinfo);
+ if (rinfo->mon1_EDID)
+ sysfs_remove_bin_file(&rinfo->pdev->dev.kobj, &edid1_attr);
+ if (rinfo->mon2_EDID)
+ sysfs_remove_bin_file(&rinfo->pdev->dev.kobj, &edid2_attr);
+
#if 0
/* restore original state
*
iounmap(rinfo->mmio_base);
iounmap(rinfo->fb_base);
- pci_release_regions(pdev);
+ pci_release_region(pdev, 2);
+ pci_release_region(pdev, 0);
kfree(rinfo->mon1_EDID);
kfree(rinfo->mon2_EDID);
force_measure_pll = 1;
} else if (!strncmp(this_opt, "ignore_edid", 11)) {
ignore_edid = 1;
+#if defined(CONFIG_PM) && defined(CONFIG_X86)
+ } else if (!strncmp(this_opt, "force_sleep", 11)) {
+ radeon_force_sleep = 1;
+#endif
} else
mode_option = this_opt;
}
MODULE_PARM_DESC(panel_yres, "int: set panel yres");
module_param(mode_option, charp, 0);
MODULE_PARM_DESC(mode_option, "Specify resolution as \"<xres>x<yres>[-<bpp>][@<refresh>]\" ");
+#if defined(CONFIG_PM) && defined(CONFIG_X86)
+module_param(radeon_force_sleep, int, 0);
+MODULE_PARM_DESC(radeon_force_sleep, "bool: force ACPI sleep mode on untested machines");
+#endif
git://git.onelab.eu / linux-2.6.git / blobdiff