matrox_cfbX_init(PMINFO2);
}
}
+ ACCESS_FBINFO(initialized) = 1;
return 0;
}
return -EFAULT;
return err;
}
+ case VIDIOC_S_CTRL_OLD:
case VIDIOC_S_CTRL:
{
struct v4l2_control ctrl;
return 1;
switch (blank) {
- case 1: seq = 0x20; crtc = 0x00; break; /* works ??? */
- case 2: seq = 0x20; crtc = 0x10; break;
- case 3: seq = 0x20; crtc = 0x20; break;
- case 4: seq = 0x20; crtc = 0x30; break;
- default: seq = 0x00; crtc = 0x00; break;
+ case FB_BLANK_NORMAL: seq = 0x20; crtc = 0x00; break; /* works ??? */
+ case FB_BLANK_VSYNC_SUSPEND: seq = 0x20; crtc = 0x10; break;
+ case FB_BLANK_HSYNC_SUSPEND: seq = 0x20; crtc = 0x20; break;
+ case FB_BLANK_POWERDOWN: seq = 0x20; crtc = 0x30; break;
+ default: seq = 0x00; crtc = 0x00; break;
}
CRITBEGIN
#ifdef CONFIG_FB_MATROX_MYSTIQUE
static struct video_board vbMystique = {0x0800000, 0x0800000, FB_ACCEL_MATROX_MGA1064SG, &matrox_mystique};
#endif /* CONFIG_FB_MATROX_MYSTIQUE */
-#ifdef CONFIG_FB_MATROX_G100
+#ifdef CONFIG_FB_MATROX_G
static struct video_board vbG100 = {0x0800000, 0x0800000, FB_ACCEL_MATROX_MGAG100, &matrox_G100};
static struct video_board vbG200 = {0x1000000, 0x1000000, FB_ACCEL_MATROX_MGAG200, &matrox_G100};
#ifdef CONFIG_FB_MATROX_32MB
&vbMystique,
"Mystique 220 (PCI)"},
#endif
-#ifdef CONFIG_FB_MATROX_G100
+#ifdef CONFIG_FB_MATROX_G
{PCI_VENDOR_ID_MATROX, PCI_DEVICE_ID_MATROX_G100_MM, 0xFF,
0, 0,
DEVF_G100,
unsigned int memsize;
int err;
+ static struct pci_device_id intel_82437[] = {
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82437) },
+ { },
+ };
+
DBG(__FUNCTION__)
/* set default values... */
mga_option |= MX_OPTION_BSWAP;
/* disable palette snooping */
cmd &= ~PCI_COMMAND_VGA_PALETTE;
- if (pci_find_device(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82437, NULL)) {
+ if (pci_dev_present(intel_82437)) {
if (!(mga_option & 0x20000000) && !ACCESS_FBINFO(devflags.nopciretry)) {
printk(KERN_WARNING "matroxfb: Disabling PCI retries due to i82437 present\n");
}
}
ACCESS_FBINFO(devflags.ydstorg) = 0;
- ACCESS_FBINFO(fbcon.currcon) = -1;
ACCESS_FBINFO(video.base) = video_base_phys;
ACCESS_FBINFO(video.len_usable) = ACCESS_FBINFO(video.len);
if (ACCESS_FBINFO(video.len_usable) > b->base->maxdisplayable)
ACCESS_FBINFO(fbcon.pseudo_palette) = ACCESS_FBINFO(cmap);
/* after __init time we are like module... no logo */
ACCESS_FBINFO(fbcon.flags) = hotplug ? FBINFO_FLAG_MODULE : FBINFO_FLAG_DEFAULT;
+ ACCESS_FBINFO(fbcon.flags) |= FBINFO_PARTIAL_PAN_OK | /* Prefer panning for scroll under MC viewer/edit */
+ FBINFO_HWACCEL_COPYAREA | /* We have hw-assisted bmove */
+ FBINFO_HWACCEL_FILLRECT | /* And fillrect */
+ FBINFO_HWACCEL_IMAGEBLIT | /* And imageblit */
+ FBINFO_HWACCEL_XPAN | /* And we support both horizontal */
+ FBINFO_HWACCEL_YPAN; /* And vertical panning */
ACCESS_FBINFO(video.len_usable) &= PAGE_MASK;
fb_alloc_cmap(&ACCESS_FBINFO(fbcon.cmap), 256, 1);
/* We do not have to set currcon to 0... register_framebuffer do it for us on first console
* and we do not want currcon == 0 for subsequent framebuffers */
+ ACCESS_FBINFO(fbcon).device = &ACCESS_FBINFO(pcidev)->dev;
if (register_framebuffer(&ACCESS_FBINFO(fbcon)) < 0) {
goto failVideoIO;
}
printk("fb%d: %s frame buffer device\n",
ACCESS_FBINFO(fbcon.node), ACCESS_FBINFO(fbcon.fix.id));
- if (ACCESS_FBINFO(fbcon.currcon) < 0) {
- /* there is no console on this fb... but we have to initialize hardware
- * until someone tells me what is proper thing to do */
- printk(KERN_INFO "fb%d: initializing hardware\n",
- ACCESS_FBINFO(fbcon.node));
- /* We have to use FB_ACTIVATE_FORCE, as we had to put vesafb_defined to the fbcon.var
- * already before, so register_framebuffer works correctly. */
- vesafb_defined.activate |= FB_ACTIVATE_FORCE;
- fb_set_var(&ACCESS_FBINFO(fbcon), &vesafb_defined);
- }
+
+ /* there is no console on this fb... but we have to initialize hardware
+ * until someone tells me what is proper thing to do */
+ if (!ACCESS_FBINFO(initialized)) {
+ printk(KERN_INFO "fb%d: initializing hardware\n",
+ ACCESS_FBINFO(fbcon.node));
+ /* We have to use FB_ACTIVATE_FORCE, as we had to put vesafb_defined to the fbcon.var
+ * already before, so register_framebuffer works correctly. */
+ vesafb_defined.activate |= FB_ACTIVATE_FORCE;
+ fb_set_var(&ACCESS_FBINFO(fbcon), &vesafb_defined);
+ }
+
return 0;
failVideoIO:;
matroxfb_g450_shutdown(PMINFO2);
{PCI_VENDOR_ID_MATROX, PCI_DEVICE_ID_MATROX_MYS,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
#endif
-#ifdef CONFIG_FB_MATROX_G100
+#ifdef CONFIG_FB_MATROX_G
{PCI_VENDOR_ID_MATROX, PCI_DEVICE_ID_MATROX_G100_MM,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{PCI_VENDOR_ID_MATROX, PCI_DEVICE_ID_MATROX_G100_AGP,
MODULE_DESCRIPTION("Accelerated FBDev driver for Matrox Millennium/Mystique/G100/G200/G400/G450/G550");
MODULE_LICENSE("GPL");
-MODULE_PARM(mem, "i");
+module_param(mem, int, 0);
MODULE_PARM_DESC(mem, "Size of available memory in MB, KB or B (2,4,8,12,16MB, default=autodetect)");
-MODULE_PARM(disabled, "i");
+module_param(disabled, int, 0);
MODULE_PARM_DESC(disabled, "Disabled (0 or 1=disabled) (default=0)");
-MODULE_PARM(noaccel, "i");
+module_param(noaccel, int, 0);
MODULE_PARM_DESC(noaccel, "Do not use accelerating engine (0 or 1=disabled) (default=0)");
-MODULE_PARM(nopan, "i");
+module_param(nopan, int, 0);
MODULE_PARM_DESC(nopan, "Disable pan on startup (0 or 1=disabled) (default=0)");
-MODULE_PARM(no_pci_retry, "i");
+module_param(no_pci_retry, int, 0);
MODULE_PARM_DESC(no_pci_retry, "PCI retries enabled (0 or 1=disabled) (default=0)");
-MODULE_PARM(novga, "i");
+module_param(novga, int, 0);
MODULE_PARM_DESC(novga, "VGA I/O (0x3C0-0x3DF) disabled (0 or 1=disabled) (default=0)");
-MODULE_PARM(nobios, "i");
+module_param(nobios, int, 0);
MODULE_PARM_DESC(nobios, "Disables ROM BIOS (0 or 1=disabled) (default=do not change BIOS state)");
-MODULE_PARM(noinit, "i");
+module_param(noinit, int, 0);
MODULE_PARM_DESC(noinit, "Disables W/SG/SD-RAM and bus interface initialization (0 or 1=do not initialize) (default=0)");
-MODULE_PARM(memtype, "i");
+module_param(memtype, int, 0);
MODULE_PARM_DESC(memtype, "Memory type for G200/G400 (see Documentation/fb/matroxfb.txt for explanation) (default=3 for G200, 0 for G400)");
-MODULE_PARM(mtrr, "i");
+#ifdef CONFIG_MTRR
+module_param(mtrr, int, 0);
MODULE_PARM_DESC(mtrr, "This speeds up video memory accesses (0=disabled or 1) (default=1)");
-MODULE_PARM(sgram, "i");
+#endif
+module_param(sgram, int, 0);
MODULE_PARM_DESC(sgram, "Indicates that G100/G200/G400 has SGRAM memory (0=SDRAM, 1=SGRAM) (default=0)");
-MODULE_PARM(inv24, "i");
+module_param(inv24, int, 0);
MODULE_PARM_DESC(inv24, "Inverts clock polarity for 24bpp and loop frequency > 100MHz (default=do not invert polarity)");
-MODULE_PARM(inverse, "i");
+module_param(inverse, int, 0);
MODULE_PARM_DESC(inverse, "Inverse (0 or 1) (default=0)");
#ifdef CONFIG_FB_MATROX_MULTIHEAD
-MODULE_PARM(dev, "i");
+module_param(dev, int, 0);
MODULE_PARM_DESC(dev, "Multihead support, attach to device ID (0..N) (default=all working)");
#else
-MODULE_PARM(dev, "i");
+module_param(dev, int, 0);
MODULE_PARM_DESC(dev, "Multihead support, attach to device ID (0..N) (default=first working)");
#endif
-MODULE_PARM(vesa, "i");
+module_param(vesa, int, 0);
MODULE_PARM_DESC(vesa, "Startup videomode (0x000-0x1FF) (default=0x101)");
-MODULE_PARM(xres, "i");
+module_param(xres, int, 0);
MODULE_PARM_DESC(xres, "Horizontal resolution (px), overrides xres from vesa (default=vesa)");
-MODULE_PARM(yres, "i");
+module_param(yres, int, 0);
MODULE_PARM_DESC(yres, "Vertical resolution (scans), overrides yres from vesa (default=vesa)");
-MODULE_PARM(upper, "i");
+module_param(upper, int, 0);
MODULE_PARM_DESC(upper, "Upper blank space (scans), overrides upper from vesa (default=vesa)");
-MODULE_PARM(lower, "i");
+module_param(lower, int, 0);
MODULE_PARM_DESC(lower, "Lower blank space (scans), overrides lower from vesa (default=vesa)");
-MODULE_PARM(vslen, "i");
+module_param(vslen, int, 0);
MODULE_PARM_DESC(vslen, "Vertical sync length (scans), overrides lower from vesa (default=vesa)");
-MODULE_PARM(left, "i");
+module_param(left, int, 0);
MODULE_PARM_DESC(left, "Left blank space (px), overrides left from vesa (default=vesa)");
-MODULE_PARM(right, "i");
+module_param(right, int, 0);
MODULE_PARM_DESC(right, "Right blank space (px), overrides right from vesa (default=vesa)");
-MODULE_PARM(hslen, "i");
+module_param(hslen, int, 0);
MODULE_PARM_DESC(hslen, "Horizontal sync length (px), overrides hslen from vesa (default=vesa)");
-MODULE_PARM(pixclock, "i");
+module_param(pixclock, int, 0);
MODULE_PARM_DESC(pixclock, "Pixelclock (ns), overrides pixclock from vesa (default=vesa)");
-MODULE_PARM(sync, "i");
+module_param(sync, int, 0);
MODULE_PARM_DESC(sync, "Sync polarity, overrides sync from vesa (default=vesa)");
-MODULE_PARM(depth, "i");
+module_param(depth, int, 0);
MODULE_PARM_DESC(depth, "Color depth (0=text,8,15,16,24,32) (default=vesa)");
-MODULE_PARM(maxclk, "i");
+module_param(maxclk, int, 0);
MODULE_PARM_DESC(maxclk, "Startup maximal clock, 0-999MHz, 1000-999999kHz, 1000000-INF Hz");
-MODULE_PARM(fh, "i");
+module_param(fh, int, 0);
MODULE_PARM_DESC(fh, "Startup horizontal frequency, 0-999kHz, 1000-INF Hz");
-MODULE_PARM(fv, "i");
+module_param(fv, int, 0);
MODULE_PARM_DESC(fv, "Startup vertical frequency, 0-INF Hz\n"
"You should specify \"fv:max_monitor_vsync,fh:max_monitor_hsync,maxclk:max_monitor_dotclock\"\n");
-MODULE_PARM(grayscale, "i");
+module_param(grayscale, int, 0);
MODULE_PARM_DESC(grayscale, "Sets display into grayscale. Works perfectly with paletized videomode (4, 8bpp), some limitations apply to 16, 24 and 32bpp videomodes (default=nograyscale)");
-MODULE_PARM(cross4MB, "i");
+module_param(cross4MB, int, 0);
MODULE_PARM_DESC(cross4MB, "Specifies that 4MB boundary can be in middle of line. (default=autodetected)");
-MODULE_PARM(dfp, "i");
+module_param(dfp, int, 0);
MODULE_PARM_DESC(dfp, "Specifies whether to use digital flat panel interface of G200/G400 (0 or 1) (default=0)");
-MODULE_PARM(dfp_type, "i");
+module_param(dfp_type, int, 0);
MODULE_PARM_DESC(dfp_type, "Specifies DFP interface type (0 to 255) (default=read from hardware)");
-MODULE_PARM(outputs, "c8");
+module_param_string(outputs, outputs, sizeof(outputs), 0);
MODULE_PARM_DESC(outputs, "Specifies which CRTC is mapped to which output (string of up to three letters, consisting of 0 (disabled), 1 (CRTC1), 2 (CRTC2)) (default=111 for Gx50, 101 for G200/G400 with DFP, and 100 for all other devices)");
#ifdef CONFIG_PPC_PMAC
-MODULE_PARM(vmode, "i");
+module_param_named(vmode, default_vmode, int, 0);
MODULE_PARM_DESC(vmode, "Specify the vmode mode number that should be used (640x480 default)");
-MODULE_PARM(cmode, "i");
+module_param_named(cmode, default_cmode, int, 0);
MODULE_PARM_DESC(cmode, "Specify the video depth that should be used (8bit default)");
#endif
git://git.onelab.eu / linux-2.6.git / blobdiff