patch-2_6_7-vs1_9_1_12

[linux-2.6.git] / drivers / video / pm2fb.c

diff --git a/drivers/video/pm2fb.c b/drivers/video/pm2fb.c
index 483b070..61953c1 100644 (file)
--- a/drivers/video/pm2fb.c
+++ b/drivers/video/pm2fb.c
@@ -62,6 +62,16 @@
 #define DPRINTK(a,b...)
 #endif
 
+/*
+ * The 2.4 driver calls reset_card() at init time, where it also sets the
+ * initial mode. I don't think the driver should touch the chip until
+ * the console sets a video mode. So I was calling this at the start
+ * of setting a mode. However, certainly on 1280x1024 depth 16 on my
+ * PCI Graphics Blaster Exxtreme this causes the display to smear
+ * slightly.  I don't know why. Guesses to jim.hague@acm.org.
+ */
+#undef RESET_CARD_ON_MODE_SET
+
 /*
  * Driver data 
  */
@@ -340,16 +350,7 @@ static void clear_palette(struct pm2fb_par* p) {
        }
 }
 
-#if 0
-/*
- * FIXME:
- * The 2.4 driver calls this at init time, where it also sets the
- * initial mode. I don't think the driver should touch the chip
- * until the console sets a video mode. So I was calling this
- * at the start of setting a mode. However, certainly on 1280x1024
- * depth 16 this causes the display to smear slightly.
- * I don't know why. Guesses to jim.hague@acm.org.
- */
+#ifdef RESET_CARD_ON_MODE_SET
 static void reset_card(struct pm2fb_par* p)
 {
        if (p->type == PM2_TYPE_PERMEDIA2V)
@@ -501,6 +502,8 @@ static void set_video(struct pm2fb_par* p, u32 video) {
        u32 vsync;
 
        vsync = video;
+
+       DPRINTK("video = 0x%x\n", video);
        
        /*
         * The hardware cursor needs +vsync to recognise vert retrace.
@@ -660,6 +663,9 @@ static int pm2fb_set_par(struct fb_info *info)
        u32 xres;
        int data64;
 
+#ifdef RESET_CARD_ON_MODE_SET
+       reset_card(par);
+#endif
        reset_config(par);
        clear_palette(par);
     
@@ -721,8 +727,7 @@ static int pm2fb_set_par(struct fb_info *info)
 
        info->fix.visual =
                (depth == 8) ? FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_TRUECOLOR;
-       info->fix.line_length =
-               info->var.xres * ((info->var.bits_per_pixel + 7) >> 3);
+       info->fix.line_length = info->var.xres * depth / 8;
        info->cmap.len = 256;
 
        /*
@@ -803,6 +808,8 @@ static int pm2fb_set_par(struct fb_info *info)
                break;
        }
        set_pixclock(par, pixclock);
+       DPRINTK("Setting graphics mode at %dx%d depth %d\n",
+               info->var.xres, info->var.yres, info->var.bits_per_pixel);
        return 0;       
 }
 
@@ -843,7 +850,8 @@ static int pm2fb_setcolreg(unsigned regno, unsigned red, unsigned green,
         *   var->{color}.offset contains start of bitfield
         *   var->{color}.length contains length of bitfield
         *   {hardwarespecific} contains width of DAC
-        *   cmap[X] is programmed to (X << red.offset) | (X << green.offset) | (X << blue.offset)
+        *   cmap[X] is programmed to
+        *   (X << red.offset) | (X << green.offset) | (X << blue.offset)
         *   RAMDAC[X] is programmed to (red, green, blue)
         *
         * Pseudocolor:
@@ -856,8 +864,9 @@ static int pm2fb_setcolreg(unsigned regno, unsigned red, unsigned green,
         *    does not use RAMDAC (usually has 3 of them).
         *    var->{color}.offset contains start of bitfield
         *    var->{color}.length contains length of bitfield
-        *    cmap is programmed to (red << red.offset) | (green << green.offset) |
-        *                      (blue << blue.offset) | (transp << transp.offset)
+        *    cmap is programmed to
+        *    (red << red.offset) | (green << green.offset) |
+        *    (blue << blue.offset) | (transp << transp.offset)
         *    RAMDAC does not exist
         */
 #define CNVT_TOHW(val,width) ((((val)<<(width))+0x7FFF-(val))>>16)
@@ -962,6 +971,11 @@ static int pm2fb_blank(int blank_mode, struct fb_info *info)
        struct pm2fb_par *par = (struct pm2fb_par *) info->par;
        u32 video = par->video;
 
+       DPRINTK("blank_mode %d\n", blank_mode);
+
+       /* Turn everything on, then disable as requested. */
+       video |= (PM2F_VIDEO_ENABLE | PM2F_HSYNC_MASK | PM2F_VSYNC_MASK);
+
        switch (blank_mode) {
        case 0:         /* Screen: On; HSync: On, VSync: On */
                break;
@@ -1030,15 +1044,12 @@ static int __devinit pm2fb_probe(struct pci_dev *pdev,
                return err;
        }
 
-       size = sizeof(struct fb_info) + sizeof(struct pm2fb_par) + 256 * sizeof(u32);
-
+       size = sizeof(struct pm2fb_par) + 256 * sizeof(u32);
        info = framebuffer_alloc(size, &pdev->dev);
        if ( !info )
                return -ENOMEM;
-       memset(info, 0, size);
-    
-       default_par = info->par;
- 
+       default_par = (struct pm2fb_par *) info->par;
+
        switch (pdev->device) {
        case  PCI_DEVICE_ID_TI_TVP4020:
                strcpy(pm2fb_fix.id, "TVP4020");
@@ -1112,7 +1123,6 @@ static int __devinit pm2fb_probe(struct pci_dev *pdev,
 
        info->fbops             = &pm2fb_ops;
        info->fix               = pm2fb_fix;    
-       info->par               = default_par;
        info->pseudo_palette    = (void *)(default_par + 1); 
        info->flags             = FBINFO_FLAG_DEFAULT;