#define SMB_COM_DELETE 0x06
#define SMB_COM_RENAME 0x07
#define SMB_COM_LOCKING_ANDX 0x24
+#define SMB_COM_COPY 0x29
#define SMB_COM_READ_ANDX 0x2E
#define SMB_COM_WRITE_ANDX 0x2F
-#define SMB_COM_TRANSACTION2 0x32
+#define SMB_COM_TRANSACTION2 0x32
#define SMB_COM_TRANSACTION2_SECONDARY 0x33
#define SMB_COM_FIND_CLOSE2 0x34
#define SMB_COM_TREE_DISCONNECT 0x71
/* followed by NewFileName */
} RENAME_REQ;
+ /* copy request flags */
+#define COPY_MUST_BE_FILE 0x0001
+#define COPY_MUST_BE_DIR 0x0002
+#define COPY_TARGET_MODE_ASCII 0x0004 /* if not set, binary */
+#define COPY_SOURCE_MODE_ASCII 0x0008 /* if not set, binary */
+#define COPY_VERIFY_WRITES 0x0010
+#define COPY_TREE 0x0020
+
+typedef struct smb_com_copy_req {
+ struct smb_hdr hdr; /* wct = 3 */
+ __u16 Tid2;
+ __u16 OpenFunction;
+ __u16 Flags;
+ __u16 ByteCount;
+ __u8 BufferFormat; /* 4 = ASCII or Unicode */
+ unsigned char OldFileName[1];
+ /* followed by __u8 BufferFormat2 */
+ /* followed by NewFileName string */
+} COPY_REQ;
+
+typedef struct smb_com_copy_rsp {
+ struct smb_hdr hdr; /* wct = 1 */
+ __u16 CopyCount; /* number of files copied */
+ __u16 ByteCount; /* may be zero */
+ __u8 BufferFormat; /* 0x04 - only present if errored file follows */
+ unsigned char ErrorFileName[1]; /* only present if error in copy */
+} COPY_RSP;
+
#define CREATE_HARD_LINK 0x103
#define MOVEFILE_COPY_ALLOWED 0x0002
#define MOVEFILE_REPLACE_EXISTING 0x0001
#define FILE_NOTIFY_CHANGE_STREAM_SIZE 0x00000400
#define FILE_NOTIFY_CHANGE_STREAM_WRITE 0x00000800
+#define FILE_ACTION_ADDED 0x00000001
+#define FILE_ACTION_REMOVED 0x00000002
+#define FILE_ACTION_MODIFIED 0x00000003
+#define FILE_ACTION_RENAMED_OLD_NAME 0x00000004
+#define FILE_ACTION_RENAMED_NEW_NAME 0x00000005
+#define FILE_ACTION_ADDED_STREAM 0x00000006
+#define FILE_ACTION_REMOVED_STREAM 0x00000007
+#define FILE_ACTION_MODIFIED_STREAM 0x00000008
+
/* response contains array of the following structures */
struct file_notify_information {
__u32 NextEntryOffset;
#define SMB_SET_FILE_UNIX_HLINK 0x203
#define SMB_SET_FILE_BASIC_INFO2 0x3ec
#define SMB_SET_FILE_RENAME_INFORMATION 0x3f2
+#define SMB_FILE_ALL_INFO2 0x3fa
#define SMB_SET_FILE_ALLOCATION_INFO2 0x3fb
#define SMB_SET_FILE_END_OF_FILE_INFO2 0x3fc
+#define SMB_FILE_MOVE_CLUSTER_INFO 0x407
+#define SMB_FILE_QUOTA_INFO 0x408
+#define SMB_FILE_REPARSEPOINT_INFO 0x409
+#define SMB_FILE_MAXIMUM_INFO 0x40d
/* Find File infolevels */
#define SMB_FIND_FILE_DIRECTORY_INFO 0x101
__u16 LastNameOffset;
} T2_FNEXT_RSP_PARMS;
+/* QFSInfo Levels */
#define SMB_INFO_ALLOCATION 1
#define SMB_INFO_VOLUME 2
#define SMB_QUERY_FS_VOLUME_INFO 0x102
#define SMB_QUERY_FS_DEVICE_INFO 0x104
#define SMB_QUERY_FS_ATTRIBUTE_INFO 0x105
#define SMB_QUERY_CIFS_UNIX_INFO 0x200
+#define SMB_QUERY_LABEL_INFO 0x3ea
+#define SMB_QUERY_FS_QUOTA_INFO 0x3ee
typedef struct smb_com_transaction2_qfsi_req {
struct smb_hdr hdr; /* wct = 14+ */
void (*free) (struct data_blob * data_blob);
};
+#ifdef CONFIG_CIFS_POSIX
+/*
+ For better POSIX semantics from Linux client, (even better
+ than the existing CIFS Unix Extensions) we need updated PDUs for:
+
+ 1) PosixCreateX - to set and return the mode, inode#, device info and
+ perhaps add a CreateDevice - to create Pipes and other special .inodes
+ Also note POSIX open flags
+ 2) Close - to return the last write time to do cache across close more safely
+ 3) PosixQFSInfo - to return statfs info
+ 4) FindFirst return unique inode number - what about resume key, two forms short (matches readdir) and full (enough info to cache inodes)
+ 5) Mkdir - set mode
+
+ And under consideration:
+ 6) FindClose2 (return nanosecond timestamp ??)
+ 7) Use nanosecond timestamps throughout all time fields if
+ corresponding attribute flag is set
+ 8) sendfile - handle based copy
+ 9) Direct i/o
+ 10) "POSIX ACL" support
+ 11) Misc fcntls?
+
+ what about fixing 64 bit alignment
+
+ There are also various legacy SMB/CIFS requests used as is
+
+ From existing Lanman and NTLM dialects:
+ --------------------------------------
+ NEGOTIATE
+ SESSION_SETUP_ANDX (BB which?)
+ TREE_CONNECT_ANDX (BB which wct?)
+ TREE_DISCONNECT (BB add volume timestamp on response)
+ LOGOFF_ANDX
+ DELETE (note delete open file behavior)
+ DELETE_DIRECTORY
+ READ_AND_X
+ WRITE_AND_X
+ LOCKING_AND_X (note posix lock semantics)
+ RENAME (note rename across dirs and open file rename posix behaviors)
+ NT_RENAME (for hardlinks) Is this good enough for all features?
+ FIND_CLOSE2
+ TRANSACTION2 (18 cases)
+ SMB_SET_FILE_END_OF_FILE_INFO2 SMB_SET_PATH_END_OF_FILE_INFO2
+ (BB verify that never need to set allocation size)
+ SMB_SET_FILE_BASIC_INFO2 (setting times - BB can it be done via Unix ext?)
+
+ COPY (note support for copy across directories) - FUTURE, OPTIONAL
+ setting/getting OS/2 EAs - FUTURE (BB can this handle
+ setting Linux xattrs perfectly) - OPTIONAL
+ dnotify - FUTURE, OPTIONAL
+ quota - FUTURE, OPTIONAL
+
+ Note that various requests implemented for NT interop such as
+ NT_TRANSACT (IOCTL) QueryReparseInfo
+ are unneeded to servers compliant with the CIFS POSIX extensions
+
+ From CIFS Unix Extensions:
+ -------------------------
+ T2 SET_PATH_INFO (SMB_SET_FILE_UNIX_LINK) for symlinks
+ T2 SET_PATH_INFO (SMB_SET_FILE_BASIC_INFO2)
+ T2 QUERY_PATH_INFO (SMB_QUERY_FILE_UNIX_LINK)
+ T2 QUERY_PATH_INFO (SMB_QUERY_FILE_UNIX_BASIC) - BB check for missing inode fields
+ Actually need QUERY_FILE_UNIX_INFO since has inode num
+ BB what about a) blksize/blkbits/blocks
+ b) i_version
+ c) i_rdev
+ d) notify mask?
+ e) generation
+ f) size_seqcount
+ T2 FIND_FIRST/FIND_NEXT FIND_FILE_UNIX
+ TRANS2_GET_DFS_REFERRAL - OPTIONAL but recommended
+ T2_QFS_INFO QueryDevice/AttributeInfo - OPTIONAL
+
+
+ */
+#endif
+
#pragma pack() /* resume default structure packing */
#endif /* _CIFSPDU_H */