handle->h_err = err;
}
-static char error_buf[1024];
-
/* Deal with the reporting of failure conditions on a filesystem such as
* inconsistencies detected or read IO failures.
*
struct ext3_super_block *es = EXT3_SB(sb)->s_es;
EXT3_SB(sb)->s_mount_state |= EXT3_ERROR_FS;
- es->s_state |= cpu_to_le32(EXT3_ERROR_FS);
+ es->s_state |= cpu_to_le16(EXT3_ERROR_FS);
if (sb->s_flags & MS_RDONLY)
return;
{
va_list args;
- va_start (args, fmt);
- vsprintf (error_buf, fmt, args);
- va_end (args);
-
- printk (KERN_CRIT "EXT3-fs error (device %s): %s: %s\n",
- sb->s_id, function, error_buf);
+ va_start(args, fmt);
+ printk(KERN_CRIT "EXT3-fs error (device %s): %s: ",sb->s_id, function);
+ vprintk(fmt, args);
+ printk("\n");
+ va_end(args);
ext3_handle_error(sb);
}
printk (KERN_CRIT "ext3_abort called.\n");
- va_start (args, fmt);
- vsprintf (error_buf, fmt, args);
- va_end (args);
-
- if (test_opt (sb, ERRORS_PANIC))
- panic ("EXT3-fs panic (device %s): %s: %s\n",
- sb->s_id, function, error_buf);
+ va_start(args, fmt);
+ printk(KERN_CRIT "EXT3-fs error (device %s): %s: ",sb->s_id, function);
+ vprintk(fmt, args);
+ printk("\n");
+ va_end(args);
- printk (KERN_CRIT "EXT3-fs abort (device %s): %s: %s\n",
- sb->s_id, function, error_buf);
+ if (test_opt(sb, ERRORS_PANIC))
+ panic("EXT3-fs panic from previous error\n");
if (sb->s_flags & MS_RDONLY)
return;
- printk (KERN_CRIT "Remounting filesystem read-only\n");
+ printk(KERN_CRIT "Remounting filesystem read-only\n");
EXT3_SB(sb)->s_mount_state |= EXT3_ERROR_FS;
sb->s_flags |= MS_RDONLY;
EXT3_SB(sb)->s_mount_opt |= EXT3_MOUNT_ABORT;
{
va_list args;
- va_start (args, fmt);
- vsprintf (error_buf, fmt, args);
- va_end (args);
+ va_start(args, fmt);
+ printk(KERN_CRIT "EXT3-fs error (device %s): %s: ",sb->s_id, function);
+ vprintk(fmt, args);
+ printk("\n");
+ va_end(args);
/* this is to prevent panic from syncing this filesystem */
/* AKPM: is this sufficient? */
sb->s_flags |= MS_RDONLY;
- panic ("EXT3-fs panic (device %s): %s: %s\n",
- sb->s_id, function, error_buf);
+ panic ("EXT3-fs panic forced\n");
}
void ext3_warning (struct super_block * sb, const char * function,
{
va_list args;
- va_start (args, fmt);
- vsprintf (error_buf, fmt, args);
- va_end (args);
- printk (KERN_WARNING "EXT3-fs warning (device %s): %s: %s\n",
- sb->s_id, function, error_buf);
+ va_start(args, fmt);
+ printk(KERN_WARNING "EXT3-fs warning (device %s): %s: ",
+ sb->s_id, function);
+ vprintk(fmt, args);
+ printk("\n");
+ va_end(args);
}
void ext3_update_dynamic_rev(struct super_block *sb)
"inode %s:%ld at %p: mode %o, nlink %d, next %d\n",
inode->i_sb->s_id, inode->i_ino, inode,
inode->i_mode, inode->i_nlink,
- le32_to_cpu(NEXT_ORPHAN(inode)));
+ NEXT_ORPHAN(inode));
}
}
journal_destroy(sbi->s_journal);
if (!(sb->s_flags & MS_RDONLY)) {
EXT3_CLEAR_INCOMPAT_FEATURE(sb, EXT3_FEATURE_INCOMPAT_RECOVER);
- es->s_state = le16_to_cpu(sbi->s_mount_state);
+ es->s_state = cpu_to_le16(sbi->s_mount_state);
BUFFER_TRACE(sbi->s_sbh, "marking dirty");
mark_buffer_dirty(sbi->s_sbh);
ext3_commit_super(sb, es, 1);
{
ext3_inode_cachep = kmem_cache_create("ext3_inode_cache",
sizeof(struct ext3_inode_info),
- 0, SLAB_HWCACHE_ALIGN|SLAB_RECLAIM_ACCOUNT,
+ 0, SLAB_RECLAIM_ACCOUNT,
init_once, NULL);
if (ext3_inode_cachep == NULL)
return -ENOMEM;
Opt_abort, Opt_data_journal, Opt_data_ordered, Opt_data_writeback,
Opt_usrjquota, Opt_grpjquota, Opt_offusrjquota, Opt_offgrpjquota,
Opt_jqfmt_vfsold, Opt_jqfmt_vfsv0,
- Opt_tagxid, Opt_ignore, Opt_err,
+ Opt_tagxid, Opt_barrier, Opt_ignore, Opt_err,
};
static match_table_t tokens = {
{Opt_ignore, "noquota"},
{Opt_ignore, "quota"},
{Opt_ignore, "usrquota"},
+ {Opt_barrier, "barrier=%u"},
{Opt_err, NULL}
};
case Opt_abort:
set_opt(sbi->s_mount_opt, ABORT);
break;
+ case Opt_barrier:
+ if (match_int(&args[0], &option))
+ return 0;
+ if (option)
+ set_opt(sbi->s_mount_opt, BARRIER);
+ else
+ clear_opt(sbi->s_mount_opt, BARRIER);
+ break;
case Opt_ignore:
break;
default:
es->s_state = cpu_to_le16(le16_to_cpu(es->s_state) & ~EXT3_VALID_FS);
#endif
if (!(__s16) le16_to_cpu(es->s_max_mnt_count))
- es->s_max_mnt_count =
- (__s16) cpu_to_le16(EXT3_DFL_MAX_MNT_COUNT);
+ es->s_max_mnt_count = cpu_to_le16(EXT3_DFL_MAX_MNT_COUNT);
es->s_mnt_count=cpu_to_le16(le16_to_cpu(es->s_mnt_count) + 1);
es->s_mtime = cpu_to_le32(get_seconds());
ext3_update_dynamic_rev(sb);
int db_count;
int i;
int needs_recovery;
+ __le32 features;
sbi = kmalloc(sizeof(*sbi), GFP_KERNEL);
if (!sbi)
* previously didn't change the revision level when setting the flags,
* so there is a chance incompat flags are set on a rev 0 filesystem.
*/
- if ((i = EXT3_HAS_INCOMPAT_FEATURE(sb, ~EXT3_FEATURE_INCOMPAT_SUPP))) {
+ features = EXT3_HAS_INCOMPAT_FEATURE(sb, ~EXT3_FEATURE_INCOMPAT_SUPP);
+ if (features) {
printk(KERN_ERR "EXT3-fs: %s: couldn't mount because of "
"unsupported optional features (%x).\n",
- sb->s_id, i);
+ sb->s_id, le32_to_cpu(features));
goto failed_mount;
}
- if (!(sb->s_flags & MS_RDONLY) &&
- (i = EXT3_HAS_RO_COMPAT_FEATURE(sb, ~EXT3_FEATURE_RO_COMPAT_SUPP))){
+ features = EXT3_HAS_RO_COMPAT_FEATURE(sb, ~EXT3_FEATURE_RO_COMPAT_SUPP);
+ if (!(sb->s_flags & MS_RDONLY) && features) {
printk(KERN_ERR "EXT3-fs: %s: couldn't mount RDWR because of "
"unsupported optional features (%x).\n",
- sb->s_id, i);
+ sb->s_id, le32_to_cpu(features));
goto failed_mount;
}
blocksize = BLOCK_SIZE << le32_to_cpu(es->s_log_block_size);
}
es = (struct ext3_super_block *)(((char *)bh->b_data) + offset);
sbi->s_es = es;
- if (es->s_magic != le16_to_cpu(EXT3_SUPER_MAGIC)) {
+ if (es->s_magic != cpu_to_le16(EXT3_SUPER_MAGIC)) {
printk (KERN_ERR
"EXT3-fs: Magic mismatch, very weird !\n");
goto failed_mount;
* initial mount, once the journal has been initialised but before we've
* done any recovery; and again on any subsequent remount.
*/
-static void ext3_init_journal_params(struct ext3_sb_info *sbi,
- journal_t *journal)
+static void ext3_init_journal_params(struct super_block *sb, journal_t *journal)
{
+ struct ext3_sb_info *sbi = EXT3_SB(sb);
+
if (sbi->s_commit_interval)
journal->j_commit_interval = sbi->s_commit_interval;
/* We could also set up an ext3-specific default for the commit
* interval here, but for now we'll just fall back to the jbd
* default. */
-}
+ spin_lock(&journal->j_state_lock);
+ if (test_opt(sb, BARRIER))
+ journal->j_flags |= JFS_BARRIER;
+ else
+ journal->j_flags &= ~JFS_BARRIER;
+ spin_unlock(&journal->j_state_lock);
+}
static journal_t *ext3_get_journal(struct super_block *sb, int journal_inum)
{
return NULL;
}
journal->j_private = sb;
- ext3_init_journal_params(EXT3_SB(sb), journal);
+ ext3_init_journal_params(sb, journal);
return journal;
}
printk(KERN_ERR "EXT3-fs: I/O error on journal device\n");
goto out_journal;
}
- if (ntohl(journal->j_superblock->s_nr_users) != 1) {
+ if (be32_to_cpu(journal->j_superblock->s_nr_users) != 1) {
printk(KERN_ERR "EXT3-fs: External journal has more than one "
"user (unsupported) - %d\n",
- ntohl(journal->j_superblock->s_nr_users));
+ be32_to_cpu(journal->j_superblock->s_nr_users));
goto out_journal;
}
EXT3_SB(sb)->journal_bdev = bdev;
- ext3_init_journal_params(EXT3_SB(sb), journal);
+ ext3_init_journal_params(sb, journal);
return journal;
out_journal:
journal_destroy(journal);
es = sbi->s_es;
- ext3_init_journal_params(sbi, sbi->s_journal);
+ ext3_init_journal_params(sb, sbi->s_journal);
if ((*flags & MS_RDONLY) != (sb->s_flags & MS_RDONLY)) {
if (sbi->s_mount_opt & EXT3_MOUNT_ABORT)
ext3_mark_recovery_complete(sb, es);
} else {
- int ret;
+ __le32 ret;
if ((ret = EXT3_HAS_RO_COMPAT_FEATURE(sb,
~EXT3_FEATURE_RO_COMPAT_SUPP))) {
printk(KERN_WARNING "EXT3-fs: %s: couldn't "
"remount RDWR because of unsupported "
"optional features (%x).\n",
- sb->s_id, ret);
+ sb->s_id, le32_to_cpu(ret));
return -EROFS;
}
/*
git://git.onelab.eu / linux-2.6.git / blobdiff