--- /dev/null
+/*
+ * include/asm-arm/arch-pnx4008/irqs.h
+ *
+ * PNX4008 IRQ controller driver - header file
+ *
+ * Author: Dmitry Chigirev <source@mvista.com>
+ *
+ * 2005 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef __PNX4008_IRQS_h__
+#define __PNX4008_IRQS_h__
+
+#define NR_IRQS 96
+
+/*Manual: table 259, page 199*/
+
+/*SUB2 Interrupt Routing (SIC2)*/
+
+#define SIC2_BASE_INT 64
+
+#define CLK_SWITCH_ARM_INT 95 /*manual: Clkswitch ARM */
+#define CLK_SWITCH_DSP_INT 94 /*manual: ClkSwitch DSP */
+#define CLK_SWITCH_AUD_INT 93 /*manual: Clkswitch AUD */
+#define GPI_06_INT 92
+#define GPI_05_INT 91
+#define GPI_04_INT 90
+#define GPI_03_INT 89
+#define GPI_02_INT 88
+#define GPI_01_INT 87
+#define GPI_00_INT 86
+#define BT_CLKREQ_INT 85
+#define SPI1_DATIN_INT 84
+#define U5_RX_INT 83
+#define SDIO_INT_N 82
+#define CAM_HS_INT 81
+#define CAM_VS_INT 80
+#define GPI_07_INT 79
+#define DISP_SYNC_INT 78
+#define DSP_INT8 77
+#define U7_HCTS_INT 76
+#define GPI_10_INT 75
+#define GPI_09_INT 74
+#define GPI_08_INT 73
+#define DSP_INT7 72
+#define U2_HCTS_INT 71
+#define SPI2_DATIN_INT 70
+#define GPIO_05_INT 69
+#define GPIO_04_INT 68
+#define GPIO_03_INT 67
+#define GPIO_02_INT 66
+#define GPIO_01_INT 65
+#define GPIO_00_INT 64
+
+/*Manual: table 258, page 198*/
+
+/*SUB1 Interrupt Routing (SIC1)*/
+
+#define SIC1_BASE_INT 32
+
+#define USB_I2C_INT 63
+#define USB_DEV_HP_INT 62
+#define USB_DEV_LP_INT 61
+#define USB_DEV_DMA_INT 60
+#define USB_HOST_INT 59
+#define USB_OTG_ATX_INT_N 58
+#define USB_OTG_TIMER_INT 57
+#define SW_INT 56
+#define SPI1_INT 55
+#define KEY_IRQ 54
+#define DSP_M_INT 53
+#define RTC_INT 52
+#define I2C_1_INT 51
+#define I2C_2_INT 50
+#define PLL1_LOCK_INT 49
+#define PLL2_LOCK_INT 48
+#define PLL3_LOCK_INT 47
+#define PLL4_LOCK_INT 46
+#define PLL5_LOCK_INT 45
+#define SPI2_INT 44
+#define DSP_INT1 43
+#define DSP_INT2 42
+#define DSP_TDM_INT2 41
+#define TS_AUX_INT 40
+#define TS_IRQ 39
+#define TS_P_INT 38
+#define UOUT1_TO_PAD_INT 37
+#define GPI_11_INT 36
+#define DSP_INT4 35
+#define JTAG_COMM_RX_INT 34
+#define JTAG_COMM_TX_INT 33
+#define DSP_INT3 32
+
+/*Manual: table 257, page 197*/
+
+/*MAIN Interrupt Routing*/
+
+#define MAIN_BASE_INT 0
+
+#define SUB2_FIQ_N 31 /*active low */
+#define SUB1_FIQ_N 30 /*active low */
+#define JPEG_INT 29
+#define DMA_INT 28
+#define MSTIMER_INT 27
+#define IIR1_INT 26
+#define IIR2_INT 25
+#define IIR7_INT 24
+#define DSP_TDM_INT0 23
+#define DSP_TDM_INT1 22
+#define DSP_P_INT 21
+#define DSP_INT0 20
+#define DUM_INT 19
+#define UOUT0_TO_PAD_INT 18
+#define MP4_ENC_INT 17
+#define MP4_DEC_INT 16
+#define SD0_INT 15
+#define MBX_INT 14
+#define SD1_INT 13
+#define MS_INT_N 12
+#define FLASH_INT 11 /*NAND*/
+#define IIR6_INT 10
+#define IIR5_INT 9
+#define IIR4_INT 8
+#define IIR3_INT 7
+#define WATCH_INT 6
+#define HSTIMER_INT 5
+#define ARCH_TIMER_IRQ HSTIMER_INT
+#define CAM_INT 4
+#define PRNG_INT 3
+#define CRYPTO_INT 2
+#define SUB2_IRQ_N 1 /*active low */
+#define SUB1_IRQ_N 0 /*active low */
+
+#define PNX4008_IRQ_TYPES \
+{ /*IRQ #'s: */ \
+IRQT_LOW, IRQT_LOW, IRQT_LOW, IRQT_HIGH, /* 0, 1, 2, 3 */ \
+IRQT_LOW, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 4, 5, 6, 7 */ \
+IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 8, 9,10,11 */ \
+IRQT_LOW, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 12,13,14,15 */ \
+IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 16,17,18,19 */ \
+IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 20,21,22,23 */ \
+IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 24,25,26,27 */ \
+IRQT_HIGH, IRQT_HIGH, IRQT_LOW, IRQT_LOW, /* 28,29,30,31 */ \
+IRQT_HIGH, IRQT_LOW, IRQT_HIGH, IRQT_HIGH, /* 32,33,34,35 */ \
+IRQT_HIGH, IRQT_HIGH, IRQT_FALLING, IRQT_HIGH, /* 36,37,38,39 */ \
+IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 40,41,42,43 */ \
+IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 44,45,46,47 */ \
+IRQT_HIGH, IRQT_HIGH, IRQT_LOW, IRQT_LOW, /* 48,49,50,51 */ \
+IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 52,53,54,55 */ \
+IRQT_HIGH, IRQT_HIGH, IRQT_LOW, IRQT_HIGH, /* 56,57,58,59 */ \
+IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 60,61,62,63 */ \
+IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 64,65,66,67 */ \
+IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 68,69,70,71 */ \
+IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 72,73,74,75 */ \
+IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 76,77,78,79 */ \
+IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 80,81,82,83 */ \
+IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 84,85,86,87 */ \
+IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 88,89,90,91 */ \
+IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 92,93,94,95 */ \
+}
+
+/* Start Enable Pin Interrupts - table 58 page 66 */
+
+#define SE_PIN_BASE_INT 32
+
+#define SE_U7_RX_INT 63
+#define SE_U7_HCTS_INT 62
+#define SE_BT_CLKREQ_INT 61
+#define SE_U6_IRRX_INT 60
+/*59 unused*/
+#define SE_U5_RX_INT 58
+#define SE_GPI_11_INT 57
+#define SE_U3_RX_INT 56
+#define SE_U2_HCTS_INT 55
+#define SE_U2_RX_INT 54
+#define SE_U1_RX_INT 53
+#define SE_DISP_SYNC_INT 52
+/*51 unused*/
+#define SE_SDIO_INT_N 50
+#define SE_MSDIO_START_INT 49
+#define SE_GPI_06_INT 48
+#define SE_GPI_05_INT 47
+#define SE_GPI_04_INT 46
+#define SE_GPI_03_INT 45
+#define SE_GPI_02_INT 44
+#define SE_GPI_01_INT 43
+#define SE_GPI_00_INT 42
+#define SE_SYSCLKEN_PIN_INT 41
+#define SE_SPI1_DATAIN_INT 40
+#define SE_GPI_07_INT 39
+#define SE_SPI2_DATAIN_INT 38
+#define SE_GPI_10_INT 37
+#define SE_GPI_09_INT 36
+#define SE_GPI_08_INT 35
+/*34-32 unused*/
+
+/* Start Enable Internal Interrupts - table 57 page 65 */
+
+#define SE_INT_BASE_INT 0
+
+#define SE_TS_IRQ 31
+#define SE_TS_P_INT 30
+#define SE_TS_AUX_INT 29
+/*27-28 unused*/
+#define SE_USB_AHB_NEED_CLK_INT 26
+#define SE_MSTIMER_INT 25
+#define SE_RTC_INT 24
+#define SE_USB_NEED_CLK_INT 23
+#define SE_USB_INT 22
+#define SE_USB_I2C_INT 21
+#define SE_USB_OTG_TIMER_INT 20
+
+#endif /* __PNX4008_IRQS_h__ */
git://git.onelab.eu / linux-2.6.git / blobdiff