#ifndef __PXA_REGS_H
#define __PXA_REGS_H
-#include <linux/config.h>
/*
* PXA Chip selects
#define DCSR_SETCMPST (1 << 25) /* Set Descriptor Compare Status */
#define DCSR_CLRCMPST (1 << 24) /* Clear Descriptor Compare Status */
#define DCSR_CMPST (1 << 10) /* The Descriptor Compare Status */
-#define DCSR_ENRINTR (1 << 9) /* The end of Receive */
+#define DCSR_EORINTR (1 << 9) /* The end of Receive */
#endif
#define DCSR_REQPEND (1 << 8) /* Request Pending (read-only) */
#define DCSR_STOPSTATE (1 << 3) /* Stop State (read-only) */
#define SACR1_ENLBF (1 << 5) /* Enable Loopback */
#define SACR1_DRPL (1 << 4) /* Disable Replaying Function */
#define SACR1_DREC (1 << 3) /* Disable Recording Function */
-#define SACR1_AMSL (1 << 1) /* Specify Alternate Mode */
+#define SACR1_AMSL (1 << 0) /* Specify Alternate Mode */
#define SASR0_I2SOFF (1 << 7) /* Controller Status */
#define SASR0_ROR (1 << 6) /* Rx FIFO Overrun */
#define UDCISR0 __REG(0x4060000C) /* UDC Interrupt Status Register 0 */
#define UDCISR1 __REG(0x40600010) /* UDC Interrupt Status Register 1 */
#define UDCISR_INT(n,intr) (((intr) & 0x03) << (((n) & 0x0F) * 2))
-#define UDCISR1_IECC (1 << 31) /* IntEn - Configuration Change */
-#define UDCISR1_IESOF (1 << 30) /* IntEn - Start of Frame */
-#define UDCISR1_IERU (1 << 29) /* IntEn - Resume */
-#define UDCISR1_IESU (1 << 28) /* IntEn - Suspend */
-#define UDCISR1_IERS (1 << 27) /* IntEn - Reset */
-
+#define UDCISR1_IRCC (1 << 31) /* IntReq - Configuration Change */
+#define UDCISR1_IRSOF (1 << 30) /* IntReq - Start of Frame */
+#define UDCISR1_IRRU (1 << 29) /* IntReq - Resume */
+#define UDCISR1_IRSU (1 << 28) /* IntReq - Suspend */
+#define UDCISR1_IRRS (1 << 27) /* IntReq - Reset */
#define UDCFNR __REG(0x40600014) /* UDC Frame Number Register */
#define UDCOTGICR __REG(0x40600018) /* UDC On-The-Go interrupt control */
#define GPIO84_NSRXD 84 /* NSSP receive */
#define GPIO85_nPCE_1 85 /* Card Enable for Card Space (PXA27x) */
#define GPIO92_MMCDAT0 92 /* MMC DAT0 (PXA27x) */
+#define GPIO102_nPCE_1 102 /* PCMCIA (PXA27x) */
#define GPIO109_MMCDAT1 109 /* MMC DAT1 (PXA27x) */
#define GPIO110_MMCDAT2 110 /* MMC DAT2 (PXA27x) */
#define GPIO110_MMCCS0 110 /* MMC Chip Select 0 (PXA27x) */
#define GPIO84_NSSP_RX (84 | GPIO_ALT_FN_2_IN)
#define GPIO85_nPCE_1_MD (85 | GPIO_ALT_FN_1_OUT)
#define GPIO92_MMCDAT0_MD (92 | GPIO_ALT_FN_1_OUT)
+#define GPIO102_nPCE_1_MD (102 | GPIO_ALT_FN_1_OUT)
#define GPIO104_pSKTSEL_MD (104 | GPIO_ALT_FN_1_OUT)
#define GPIO109_MMCDAT1_MD (109 | GPIO_ALT_FN_1_OUT)
#define GPIO110_MMCDAT2_MD (110 | GPIO_ALT_FN_1_OUT)
#define SSCR0_RIM (1 << 22) /* Receive FIFO overrrun interrupt mask */
#define SSCR0_TUM (1 << 23) /* Transmit FIFO underrun interrupt mask */
#define SSCR0_FRDC (0x07000000) /* Frame rate divider control (mask) */
-#define SSCR0_SlotsPerFrm(c) ((x) - 1) /* Time slots per frame [1..8] */
+#define SSCR0_SlotsPerFrm(x) (((x) - 1) << 24) /* Time slots per frame [1..8] */
#define SSCR0_ADC (1 << 30) /* Audio clock select */
#define SSCR0_MOD (1 << 31) /* Mode (normal or network) */
#endif
#define SSCR0_EDSS (1 << 20) /* Extended Data Size Select */
/* extra bits in PXA255, PXA26x and PXA27x SSP ports */
+#define SSCR0_TISSP (1 << 4) /* TI Sync Serial Protocol */
#define SSCR0_PSP (3 << 4) /* PSP - Programmable Serial Protocol */
#define SSCR1_TTELP (1 << 31) /* TXD Tristate Enable Last Phase */
#define SSCR1_TTE (1 << 30) /* TXD Tristate Enable */
#define SSSR_TINT (1 << 19) /* Receiver Time-out Interrupt */
#define SSSR_PINT (1 << 18) /* Peripheral Trailing Byte Interrupt */
+#define SSPSP_FSRT (1 << 25) /* Frame Sync Relative Timing */
#define SSPSP_DMYSTOP(x) (x << 23) /* Dummy Stop */
#define SSPSP_SFRMWDTH(x) (x << 16) /* Serial Frame Width */
#define SSPSP_SFRMDLY(x) (x << 9) /* Serial Frame Delay */
#if defined (CONFIG_PXA27x)
#define SSTO_P1 __REG(0x41000028) /* SSP Port 1 Time Out Register */
#define SSPSP_P1 __REG(0x4100002C) /* SSP Port 1 Programmable Serial Protocol */
+#define SSTSA_P1 __REG(0x41000030) /* SSP Port 1 Tx Timeslot Active */
+#define SSRSA_P1 __REG(0x41000034) /* SSP Port 1 Rx Timeslot Active */
+#define SSTSS_P1 __REG(0x41000038) /* SSP Port 1 Timeslot Status */
+#define SSACD_P1 __REG(0x4100003C) /* SSP Port 1 Audio Clock Divider */
#define SSCR0_P2 __REG(0x41700000) /* SSP Port 2 Control Register 0 */
#define SSCR1_P2 __REG(0x41700004) /* SSP Port 2 Control Register 1 */
#define SSSR_P2 __REG(0x41700008) /* SSP Port 2 Status Register */
#define SSDR_P2 __REG(0x41700010) /* (Write / Read) SSP Port 2 Data Write Register/SSP Data Read Register */
#define SSTO_P2 __REG(0x41700028) /* SSP Port 2 Time Out Register */
#define SSPSP_P2 __REG(0x4170002C) /* SSP Port 2 Programmable Serial Protocol */
+#define SSTSA_P2 __REG(0x41700030) /* SSP Port 2 Tx Timeslot Active */
+#define SSRSA_P2 __REG(0x41700034) /* SSP Port 2 Rx Timeslot Active */
+#define SSTSS_P2 __REG(0x41700038) /* SSP Port 2 Timeslot Status */
+#define SSACD_P2 __REG(0x4170003C) /* SSP Port 2 Audio Clock Divider */
#define SSCR0_P3 __REG(0x41900000) /* SSP Port 3 Control Register 0 */
#define SSCR1_P3 __REG(0x41900004) /* SSP Port 3 Control Register 1 */
#define SSSR_P3 __REG(0x41900008) /* SSP Port 3 Status Register */
#define SSDR_P3 __REG(0x41900010) /* (Write / Read) SSP Port 3 Data Write Register/SSP Data Read Register */
#define SSTO_P3 __REG(0x41900028) /* SSP Port 3 Time Out Register */
#define SSPSP_P3 __REG(0x4190002C) /* SSP Port 3 Programmable Serial Protocol */
+#define SSTSA_P3 __REG(0x41900030) /* SSP Port 3 Tx Timeslot Active */
+#define SSRSA_P3 __REG(0x41900034) /* SSP Port 3 Rx Timeslot Active */
+#define SSTSS_P3 __REG(0x41900038) /* SSP Port 3 Timeslot Status */
+#define SSACD_P3 __REG(0x4190003C) /* SSP Port 3 Audio Clock Divider */
#else /* PXA255 (only port 2) and PXA26x ports*/
#define SSTO_P1 __REG(0x41000028) /* SSP Port 1 Time Out Register */
#define SSPSP_P1 __REG(0x4100002C) /* SSP Port 1 Programmable Serial Protocol */
#define SSDR_P(x) (*(((x) == 1) ? &SSDR_P1 : ((x) == 2) ? &SSDR_P2 : ((x) == 3) ? &SSDR_P3 : NULL))
#define SSTO_P(x) (*(((x) == 1) ? &SSTO_P1 : ((x) == 2) ? &SSTO_P2 : ((x) == 3) ? &SSTO_P3 : NULL))
#define SSPSP_P(x) (*(((x) == 1) ? &SSPSP_P1 : ((x) == 2) ? &SSPSP_P2 : ((x) == 3) ? &SSPSP_P3 : NULL))
+#define SSTSA_P(x) (*(((x) == 1) ? &SSTSA_P1 : ((x) == 2) ? &SSTSA_P2 : ((x) == 3) ? &SSTSA_P3 : NULL))
+#define SSRSA_P(x) (*(((x) == 1) ? &SSRSA_P1 : ((x) == 2) ? &SSRSA_P2 : ((x) == 3) ? &SSRSA_P3 : NULL))
+#define SSTSS_P(x) (*(((x) == 1) ? &SSTSS_P1 : ((x) == 2) ? &SSTSS_P2 : ((x) == 3) ? &SSTSS_P3 : NULL))
+#define SSACD_P(x) (*(((x) == 1) ? &SSACD_P1 : ((x) == 2) ? &SSACD_P2 : ((x) == 3) ? &SSACD_P3 : NULL))
/*
* MultiMediaCard (MMC) controller
#define CICR1_TBIT (1 << 31) /* Transparency bit */
#define CICR1_RGBT_CONV (0x3 << 30) /* RGBT conversion mask */
-#define CICR1_PPL (0x3f << 15) /* Pixels per line mask */
+#define CICR1_PPL (0x7ff << 15) /* Pixels per line mask */
#define CICR1_RGB_CONV (0x7 << 12) /* RGB conversion mask */
#define CICR1_RGB_F (1 << 11) /* RGB format */
#define CICR1_YCBCR_F (1 << 10) /* YCbCr format */
#define CICR3_VSW (0x3f << 10) /* Vertical sync pulse width mask */
#define CICR3_BFPW (0x3f << 3) /* Beginning-of-frame pixel clock
wait count mask */
-#define CICR3_LPF (0x3ff << 0) /* Lines per frame mask */
+#define CICR3_LPF (0x7ff << 0) /* Lines per frame mask */
#define CICR4_MCLK_DLY (0x3 << 24) /* MCLK Data Capture Delay mask */
#define CICR4_PCLK_EN (1 << 23) /* Pixel clock enable */
#define CISR_EOL (1 << 8) /* End of line */
#define CISR_PAR_ERR (1 << 7) /* Parity error */
#define CISR_CQD (1 << 6) /* Camera interface quick disable */
-#define CISR_SOF (1 << 5) /* Start of frame */
-#define CISR_CDD (1 << 4) /* Camera interface disable done */
+#define CISR_CDD (1 << 5) /* Camera interface disable done */
+#define CISR_SOF (1 << 4) /* Start of frame */
#define CISR_EOF (1 << 3) /* End of frame */
#define CISR_IFO_2 (1 << 2) /* FIFO overrun for Channel 2 */
#define CISR_IFO_1 (1 << 1) /* FIFO overrun for Channel 1 */
git://git.onelab.eu / linux-2.6.git / blobdiff