VServer 1.9.2 (patch-2.6.8.1-vs1.9.2.diff)

[linux-2.6.git] / include / asm-arm / arch-sa1100 / irqs.h

diff --git a/include/asm-arm/arch-sa1100/irqs.h b/include/asm-arm/arch-sa1100/irqs.h
index 4d906d3..7c6ac3e 100644 (file)
--- a/include/asm-arm/arch-sa1100/irqs.h
+++ b/include/asm-arm/arch-sa1100/irqs.h
@@ -121,10 +121,35 @@
 #define IRQ_S0_BVD1_STSCHG     (IRQ_BOARD_END + 53)
 #define IRQ_S1_BVD1_STSCHG     (IRQ_BOARD_END + 54)
 
+#define IRQ_LOCOMO_START       (IRQ_BOARD_END)
+#define IRQ_LOCOMO_KEY         (IRQ_BOARD_END + 0)
+#define IRQ_LOCOMO_GPIO0       (IRQ_BOARD_END + 1)
+#define IRQ_LOCOMO_GPIO1       (IRQ_BOARD_END + 2)
+#define IRQ_LOCOMO_GPIO2       (IRQ_BOARD_END + 3)
+#define IRQ_LOCOMO_GPIO3       (IRQ_BOARD_END + 4)
+#define IRQ_LOCOMO_GPIO4       (IRQ_BOARD_END + 5)
+#define IRQ_LOCOMO_GPIO5       (IRQ_BOARD_END + 6)
+#define IRQ_LOCOMO_GPIO6       (IRQ_BOARD_END + 7)
+#define IRQ_LOCOMO_GPIO7       (IRQ_BOARD_END + 8)
+#define IRQ_LOCOMO_GPIO8       (IRQ_BOARD_END + 9)
+#define IRQ_LOCOMO_GPIO9       (IRQ_BOARD_END + 10)
+#define IRQ_LOCOMO_GPIO10      (IRQ_BOARD_END + 11)
+#define IRQ_LOCOMO_GPIO11      (IRQ_BOARD_END + 12)
+#define IRQ_LOCOMO_GPIO12      (IRQ_BOARD_END + 13)
+#define IRQ_LOCOMO_GPIO13      (IRQ_BOARD_END + 14)
+#define IRQ_LOCOMO_GPIO14      (IRQ_BOARD_END + 15)
+#define IRQ_LOCOMO_GPIO15      (IRQ_BOARD_END + 16)
+#define IRQ_LOCOMO_LT          (IRQ_BOARD_END + 17)
+#define IRQ_LOCOMO_SPI_RFR     (IRQ_BOARD_END + 18)
+#define IRQ_LOCOMO_SPI_RFW     (IRQ_BOARD_END + 19)
+#define IRQ_LOCOMO_SPI_OVRN    (IRQ_BOARD_END + 20)
+#define IRQ_LOCOMO_SPI_TEND    (IRQ_BOARD_END + 21)
+
 /*
  * Figure out the MAX IRQ number.
  *
  * If we have an SA1111, the max IRQ is S1_BVD1_STSCHG+1.
+ * If we have an LoCoMo, the max IRQ is IRQ_LOCOMO_SPI_TEND+1
  * If graphicsclient or graphicsmaster, we don't have a SA1111.
  * Otherwise, we have the standard IRQs only.
  */
@@ -134,6 +159,8 @@
       defined(CONFIG_SA1100_GRAPHICSMASTER) || \
       defined(CONFIG_SA1100_H3800)
 #define NR_IRQS                        (IRQ_BOARD_END)
+#elif defined(CONFIG_SHARP_LOCOMO)
+#define NR_IRQS                        (IRQ_LOCOMO_SPI_TEND + 1)
 #else
 #define NR_IRQS                        (IRQ_BOARD_START)
 #endif
@@ -150,6 +177,12 @@
 #define IRQ_SYSTEM3_SA1111     (IRQ_BOARD_START + 0)
 #define IRQ_SYSTEM3_SMC9196    (IRQ_BOARD_START + 1)
 
+/* LoCoMo Interrupts (CONFIG_SHARP_LOCOMO) */
+#define IRQ_LOCOMO_KEY_BASE    (IRQ_BOARD_START + 0)
+#define IRQ_LOCOMO_GPIO_BASE   (IRQ_BOARD_START + 1)
+#define IRQ_LOCOMO_LT_BASE     (IRQ_BOARD_START + 2)
+#define IRQ_LOCOMO_SPI_BASE    (IRQ_BOARD_START + 3)
+
 /* H3800-specific IRQs (CONFIG_SA1100_H3800) */
 #define H3800_KPIO_IRQ_START    (IRQ_BOARD_START)
 #define IRQ_H3800_KEY           (IRQ_BOARD_START + 0)