fedora core 6 1.2949 + vserver 2.2.0

[linux-2.6.git] / include / asm-arm / hardware / locomo.h

diff --git a/include/asm-arm/hardware/locomo.h b/include/asm-arm/hardware/locomo.h
index 5f10048..adab777 100644 (file)
--- a/include/asm-arm/hardware/locomo.h
+++ b/include/asm-arm/hardware/locomo.h
@@ -54,17 +54,18 @@
 #define        LOCOMO_DAC_SDAOEB       0x01    /* SDA pin output data       */
 
 /* SPI interface */
-#define LOCOMO_SPIMD   0x60            /* SPI mode setting */
-#define LOCOMO_SPICT   0x64            /* SPI mode control */
-#define LOCOMO_SPIST   0x68            /* SPI status */
-#define LOCOMO_SPIIS   0x70            /* SPI interrupt status */
-#define LOCOMO_SPIWE   0x74            /* SPI interrupt status write enable */
-#define LOCOMO_SPIIE   0x78            /* SPI interrupt enable */
-#define LOCOMO_SPIIR   0x7c            /* SPI interrupt request */
-#define LOCOMO_SPITD   0x80            /* SPI transfer data write */
-#define LOCOMO_SPIRD   0x84            /* SPI receive data read */
-#define LOCOMO_SPITS   0x88            /* SPI transfer data shift */
-#define LOCOMO_SPIRS   0x8C            /* SPI receive data shift */
+#define LOCOMO_SPI     0x60
+#define LOCOMO_SPIMD   0x00            /* SPI mode setting */
+#define LOCOMO_SPICT   0x04            /* SPI mode control */
+#define LOCOMO_SPIST   0x08            /* SPI status */
+#define LOCOMO_SPIIS   0x10            /* SPI interrupt status */
+#define LOCOMO_SPIWE   0x14            /* SPI interrupt status write enable */
+#define LOCOMO_SPIIE   0x18            /* SPI interrupt enable */
+#define LOCOMO_SPIIR   0x1c            /* SPI interrupt request */
+#define LOCOMO_SPITD   0x20            /* SPI transfer data write */
+#define LOCOMO_SPIRD   0x24            /* SPI receive data read */
+#define LOCOMO_SPITS   0x28            /* SPI transfer data shift */
+#define LOCOMO_SPIRS   0x2C            /* SPI receive data shift */
 #define        LOCOMO_SPI_TEND (1 << 3)        /* Transfer end bit */
 #define        LOCOMO_SPI_OVRN (1 << 2)        /* Over Run bit */
 #define        LOCOMO_SPI_RFW  (1 << 1)        /* write buffer bit */
@@ -111,6 +112,8 @@
 #define LOCOMO_ALS             0x00    /* Adjust light cycle */
 #define LOCOMO_ALD             0x04    /* Adjust light duty */
 
+#define LOCOMO_ALC_EN          0x8000
+
 /* Backlight controller: TFT signal */
 #define LOCOMO_BACKLIGHT       0x38
 #define LOCOMO_TC              0x00            /* TFT control signal */
@@ -159,6 +162,7 @@ extern struct bus_type locomo_bus_type;
 #define LOCOMO_DEVID_AUDIO     3
 #define LOCOMO_DEVID_LED       4
 #define LOCOMO_DEVID_UART      5
+#define LOCOMO_DEVID_SPI               6
 
 struct locomo_dev {
        struct device   dev;
@@ -195,12 +199,16 @@ int locomo_driver_register(struct locomo_driver *);
 void locomo_driver_unregister(struct locomo_driver *);
 
 /* GPIO control functions */
-void locomo_gpio_set_dir(struct locomo_dev *ldev, unsigned int bits, unsigned int dir);
-unsigned int locomo_gpio_read_level(struct locomo_dev *ldev, unsigned int bits);
-unsigned int locomo_gpio_read_output(struct locomo_dev *ldev, unsigned int bits);
-void locomo_gpio_write(struct locomo_dev *ldev, unsigned int bits, unsigned int set);
+void locomo_gpio_set_dir(struct device *dev, unsigned int bits, unsigned int dir);
+int locomo_gpio_read_level(struct device *dev, unsigned int bits);
+int locomo_gpio_read_output(struct device *dev, unsigned int bits);
+void locomo_gpio_write(struct device *dev, unsigned int bits, unsigned int set);
+
 
 /* M62332 control function */
 void locomo_m62332_senddata(struct locomo_dev *ldev, unsigned int dac_data, int channel);
 
+/* Frontlight control */
+void locomo_frontlight_set(struct locomo_dev *dev, int duty, int vr, int bpwf);
+
 #endif