#ifdef __KERNEL__
#include <linux/config.h>
-#include <linux/kernel.h>
-#include <asm/proc-fns.h>
-#define vectors_base() (0)
+/*
+ * This is used to ensure the compiler did actually allocate the register we
+ * asked it for some inline assembly sequences. Apparently we can't trust
+ * the compiler from one version to another so a bit of paranoia won't hurt.
+ * This string is meant to be concatenated with the inline asm string and
+ * will cause compilation to stop on mismatch. (From ARM32 - may come in handy)
+ */
+#define __asmeq(x, y) ".ifnc " x "," y " ; .err ; .endif\n\t"
-static inline unsigned long __xchg(unsigned long x, volatile void *ptr, int size)
-{
- extern void __bad_xchg(volatile void *, int);
+#ifndef __ASSEMBLY__
- switch (size) {
- case 1: return cpu_xchg_1(x, ptr);
- case 4: return cpu_xchg_4(x, ptr);
- default: __bad_xchg(ptr, size);
- }
- return 0;
-}
+#include <linux/linkage.h>
+
+struct thread_info;
+struct task_struct;
+#if 0
+/* information about the system we're running on */
+extern unsigned int system_rev;
+extern unsigned int system_serial_low;
+extern unsigned int system_serial_high;
+extern unsigned int mem_fclk_21285;
+
+FIXME - sort this
/*
* We need to turn the caches off before calling the reset vector - RiscOS
* messes up if we don't
*/
#define proc_hard_reset() cpu_proc_fin()
+#endif
+
+struct pt_regs;
+
+void die(const char *msg, struct pt_regs *regs, int err)
+ __attribute__((noreturn));
+
+void die_if_kernel(const char *str, struct pt_regs *regs, int err);
+
+void hook_fault_code(int nr, int (*fn)(unsigned long, unsigned int,
+ struct pt_regs *),
+ int sig, const char *name);
+
+#include <asm/proc-fns.h>
+
+#define xchg(ptr,x) \
+ ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
+
+#define tas(ptr) (xchg((ptr),1))
+
+extern asmlinkage void __backtrace(void);
+
+#define set_cr(x) \
+ __asm__ __volatile__( \
+ "mcr p15, 0, %0, c1, c0, 0 @ set CR" \
+ : : "r" (x) : "cc")
+
+#define get_cr() \
+ ({ \
+ unsigned int __val; \
+ __asm__ __volatile__( \
+ "mrc p15, 0, %0, c1, c0, 0 @ get CR" \
+ : "=r" (__val) : : "cc"); \
+ __val; \
+ })
+
+extern unsigned long cr_no_alignment; /* defined in entry-armv.S */
+extern unsigned long cr_alignment; /* defined in entry-armv.S */
+
+#define UDBG_UNDEFINED (1 << 0)
+#define UDBG_SYSCALL (1 << 1)
+#define UDBG_BADABORT (1 << 2)
+#define UDBG_SEGV (1 << 3)
+#define UDBG_BUS (1 << 4)
+
+extern unsigned int user_debug;
+
+#define vectors_base() (0)
+
+#define mb() __asm__ __volatile__ ("" : : : "memory")
+#define rmb() mb()
+#define wmb() mb()
+#define nop() __asm__ __volatile__("mov\tr0,r0\t@ nop\n\t");
+
+#define read_barrier_depends() do { } while(0)
+#define set_mb(var, value) do { var = value; mb(); } while (0)
+#define set_wmb(var, value) do { var = value; wmb(); } while (0)
+
+/*
+ * We assume knowledge of how
+ * spin_unlock_irq() and friends are implemented. This avoids
+ * us needlessly decrementing and incrementing the preempt count.
+ */
+#define prepare_arch_switch(rq,next) local_irq_enable()
+#define finish_arch_switch(rq,prev) spin_unlock(&(rq)->lock)
+#define task_running(rq,p) ((rq)->curr == (p))
+
+/*
+ * switch_to(prev, next) should switch from task `prev' to `next'
+ * `prev' will never be the same as `next'. schedule() itself
+ * contains the memory barrier to tell GCC not to cache `current'.
+ */
+extern struct task_struct *__switch_to(struct task_struct *, struct thread_info *, struct thread_info *);
+
+#define switch_to(prev,next,last) \
+do { \
+ last = __switch_to(prev,prev->thread_info,next->thread_info); \
+} while (0)
+
/*
- * A couple of speedups for the ARM
+ * Save the current interrupt enable state & disable IRQs
*/
+#define local_irq_save(x) \
+ do { \
+ unsigned long temp; \
+ __asm__ __volatile__( \
+" mov %0, pc @ save_flags_cli\n" \
+" orr %1, %0, #0x08000000\n" \
+" and %0, %0, #0x0c000000\n" \
+" teqp %1, #0\n" \
+ : "=r" (x), "=r" (temp) \
+ : \
+ : "memory"); \
+ } while (0)
/*
* Enable IRQs (sti)
: "memory"); \
} while(0)
-/* Disable FIQs (clf) */
+/* Enable FIQs (stf) */
-#define __clf() do { \
+#define __stf() do { \
unsigned long temp; \
__asm__ __volatile__( \
-" mov %0, pc @ clf\n" \
-" orr %0, %0, #0x04000000\n" \
+" mov %0, pc @ stf\n" \
+" bic %0, %0, #0x04000000\n" \
" teqp %0, #0\n" \
: "=r" (temp)); \
} while(0)
-/* Enable FIQs (stf) */
+/* Disable FIQs (clf) */
-#define __stf() do { \
+#define __clf() do { \
unsigned long temp; \
__asm__ __volatile__( \
-" mov %0, pc @ stf\n" \
-" bic %0, %0, #0x04000000\n" \
+" mov %0, pc @ clf\n" \
+" orr %0, %0, #0x04000000\n" \
" teqp %0, #0\n" \
: "=r" (temp)); \
} while(0)
+
/*
- * save current IRQ & FIQ state
+ * Save the current interrupt enable state.
*/
#define local_save_flags(x) \
do { \
: "=r" (x)); \
} while (0)
-/*
- * Save the current interrupt enable state & disable IRQs
- */
-#define local_irq_save(x) \
- do { \
- unsigned long temp; \
- __asm__ __volatile__( \
-" mov %0, pc @ save_flags_cli\n" \
-" orr %1, %0, #0x08000000\n" \
-" and %0, %0, #0x0c000000\n" \
-" teqp %1, #0\n" \
- : "=r" (x), "=r" (temp) \
- : \
- : "memory"); \
- } while (0)
/*
* restore saved IRQ & FIQ state
} while (0)
-struct thread_info;
-
-/* information about the system we're running on */
-extern unsigned int system_rev;
-extern unsigned int system_serial_low;
-extern unsigned int system_serial_high;
-
-struct pt_regs;
-
-void die(const char *msg, struct pt_regs *regs, int err)
- __attribute__((noreturn));
-
-void die_if_kernel(const char *str, struct pt_regs *regs, int err);
-
-void hook_fault_code(int nr, int (*fn)(unsigned long, unsigned int,
- struct pt_regs *),
- int sig, const char *name);
-
-#define xchg(ptr,x) \
- ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
-
-#define tas(ptr) (xchg((ptr),1))
-
-extern asmlinkage void __backtrace(void);
-
-/*
- * Include processor dependent parts
- */
-
-#define mb() __asm__ __volatile__ ("" : : : "memory")
-#define rmb() mb()
-#define wmb() mb()
-#define nop() __asm__ __volatile__("mov\tr0,r0\t@ nop\n\t");
-
-#define prepare_to_switch() do { } while(0)
-
-/*
- * switch_to(prev, next) should switch from task `prev' to `next'
- * `prev' will never be the same as `next'.
- * The `mb' is to tell GCC not to cache `current' across this call.
- */
-struct thread_info;
-
-extern struct task_struct *__switch_to(struct thread_info *, struct thread_info *);
-
-#define switch_to(prev,next,last) \
- do { \
- __switch_to(prev->thread_info,next->thread_info); \
- mb(); \
- } while (0)
-
-
#ifdef CONFIG_SMP
#error SMP not supported
-#endif /* CONFIG_SMP */
-
-#define irqs_disabled() \
-({ \
- unsigned long flags; \
- local_save_flags(flags); \
- flags & PSR_I_BIT; \
-})
+#endif
-#define set_mb(var, value) do { var = value; mb(); } while (0)
#define smp_mb() barrier()
#define smp_rmb() barrier()
#define smp_wmb() barrier()
-#define smp_read_barrier_depends() do { } while(0)
+#define smp_read_barrier_depends() do { } while(0)
#define clf() __clf()
#define stf() __stf()
+#define irqs_disabled() \
+({ \
+ unsigned long flags; \
+ local_save_flags(flags); \
+ flags & PSR_I_BIT; \
+})
+
+static inline unsigned long __xchg(unsigned long x, volatile void *ptr, int size)
+{
+ extern void __bad_xchg(volatile void *, int);
+
+ switch (size) {
+ case 1: return cpu_xchg_1(x, ptr);
+ case 4: return cpu_xchg_4(x, ptr);
+ default: __bad_xchg(ptr, size);
+ }
+ return 0;
+}
+
+#endif /* __ASSEMBLY__ */
+
#endif /* __KERNEL__ */
#endif
git://git.onelab.eu / linux-2.6.git / blobdiff