* Copyright 1992, Linus Torvalds.
*/
-#include <linux/config.h>
#include <linux/compiler.h>
+#include <asm/alternative.h>
/*
* These have to be done with inline assembly: that way the bit-setting
* bit 0 is the LSB of addr; bit 32 is the LSB of (addr+1).
*/
-#ifdef CONFIG_SMP
-#define LOCK_PREFIX "lock ; "
-#else
-#define LOCK_PREFIX ""
-#endif
-
#define ADDR (*(volatile long *) addr)
/**
*
* This function is atomic and may not be reordered. See __set_bit()
* if you do not require the atomic guarantees.
+ *
+ * Note: there are no guarantees that this function will not be reordered
+ * on non x86 architectures, so if you are writting portable code,
+ * make sure not to rely on its reordering guarantees.
+ *
* Note that @nr may be almost arbitrarily large; this function is not
* restricted to acting on a single-word quantity.
*/
-static __inline__ void set_bit(int nr, volatile unsigned long * addr)
+static inline void set_bit(int nr, volatile unsigned long * addr)
{
__asm__ __volatile__( LOCK_PREFIX
"btsl %1,%0"
- :"=m" (ADDR)
+ :"+m" (ADDR)
:"Ir" (nr));
}
* If it's called on the same region of memory simultaneously, the effect
* may be that only one operation succeeds.
*/
-static __inline__ void __set_bit(int nr, volatile unsigned long * addr)
+static inline void __set_bit(int nr, volatile unsigned long * addr)
{
__asm__(
"btsl %1,%0"
- :"=m" (ADDR)
+ :"+m" (ADDR)
:"Ir" (nr));
}
* you should call smp_mb__before_clear_bit() and/or smp_mb__after_clear_bit()
* in order to ensure changes are visible on other processors.
*/
-static __inline__ void clear_bit(int nr, volatile unsigned long * addr)
+static inline void clear_bit(int nr, volatile unsigned long * addr)
{
__asm__ __volatile__( LOCK_PREFIX
"btrl %1,%0"
- :"=m" (ADDR)
+ :"+m" (ADDR)
:"Ir" (nr));
}
-static __inline__ void __clear_bit(int nr, volatile unsigned long * addr)
+static inline void __clear_bit(int nr, volatile unsigned long * addr)
{
__asm__ __volatile__(
"btrl %1,%0"
- :"=m" (ADDR)
+ :"+m" (ADDR)
:"Ir" (nr));
}
#define smp_mb__before_clear_bit() barrier()
* If it's called on the same region of memory simultaneously, the effect
* may be that only one operation succeeds.
*/
-static __inline__ void __change_bit(int nr, volatile unsigned long * addr)
+static inline void __change_bit(int nr, volatile unsigned long * addr)
{
__asm__ __volatile__(
"btcl %1,%0"
- :"=m" (ADDR)
+ :"+m" (ADDR)
:"Ir" (nr));
}
* @nr: Bit to change
* @addr: Address to start counting from
*
- * change_bit() is atomic and may not be reordered.
+ * change_bit() is atomic and may not be reordered. It may be
+ * reordered on other architectures than x86.
* Note that @nr may be almost arbitrarily large; this function is not
* restricted to acting on a single-word quantity.
*/
-static __inline__ void change_bit(int nr, volatile unsigned long * addr)
+static inline void change_bit(int nr, volatile unsigned long * addr)
{
__asm__ __volatile__( LOCK_PREFIX
"btcl %1,%0"
- :"=m" (ADDR)
+ :"+m" (ADDR)
:"Ir" (nr));
}
* @addr: Address to count from
*
* This operation is atomic and cannot be reordered.
+ * It may be reordered on other architectures than x86.
* It also implies a memory barrier.
*/
-static __inline__ int test_and_set_bit(int nr, volatile unsigned long * addr)
+static inline int test_and_set_bit(int nr, volatile unsigned long * addr)
{
int oldbit;
__asm__ __volatile__( LOCK_PREFIX
"btsl %2,%1\n\tsbbl %0,%0"
- :"=r" (oldbit),"=m" (ADDR)
+ :"=r" (oldbit),"+m" (ADDR)
:"Ir" (nr) : "memory");
return oldbit;
}
* If two examples of this operation race, one can appear to succeed
* but actually fail. You must protect multiple accesses with a lock.
*/
-static __inline__ int __test_and_set_bit(int nr, volatile unsigned long * addr)
+static inline int __test_and_set_bit(int nr, volatile unsigned long * addr)
{
int oldbit;
__asm__(
"btsl %2,%1\n\tsbbl %0,%0"
- :"=r" (oldbit),"=m" (ADDR)
+ :"=r" (oldbit),"+m" (ADDR)
:"Ir" (nr));
return oldbit;
}
* @nr: Bit to clear
* @addr: Address to count from
*
- * This operation is atomic and cannot be reordered.
+ * This operation is atomic and cannot be reordered.
+ * It can be reorderdered on other architectures other than x86.
* It also implies a memory barrier.
*/
-static __inline__ int test_and_clear_bit(int nr, volatile unsigned long * addr)
+static inline int test_and_clear_bit(int nr, volatile unsigned long * addr)
{
int oldbit;
__asm__ __volatile__( LOCK_PREFIX
"btrl %2,%1\n\tsbbl %0,%0"
- :"=r" (oldbit),"=m" (ADDR)
+ :"=r" (oldbit),"+m" (ADDR)
:"Ir" (nr) : "memory");
return oldbit;
}
* If two examples of this operation race, one can appear to succeed
* but actually fail. You must protect multiple accesses with a lock.
*/
-static __inline__ int __test_and_clear_bit(int nr, volatile unsigned long *addr)
+static inline int __test_and_clear_bit(int nr, volatile unsigned long *addr)
{
int oldbit;
__asm__(
"btrl %2,%1\n\tsbbl %0,%0"
- :"=r" (oldbit),"=m" (ADDR)
+ :"=r" (oldbit),"+m" (ADDR)
:"Ir" (nr));
return oldbit;
}
/* WARNING: non atomic and it can be reordered! */
-static __inline__ int __test_and_change_bit(int nr, volatile unsigned long *addr)
+static inline int __test_and_change_bit(int nr, volatile unsigned long *addr)
{
int oldbit;
__asm__ __volatile__(
"btcl %2,%1\n\tsbbl %0,%0"
- :"=r" (oldbit),"=m" (ADDR)
+ :"=r" (oldbit),"+m" (ADDR)
:"Ir" (nr) : "memory");
return oldbit;
}
* This operation is atomic and cannot be reordered.
* It also implies a memory barrier.
*/
-static __inline__ int test_and_change_bit(int nr, volatile unsigned long* addr)
+static inline int test_and_change_bit(int nr, volatile unsigned long* addr)
{
int oldbit;
__asm__ __volatile__( LOCK_PREFIX
"btcl %2,%1\n\tsbbl %0,%0"
- :"=r" (oldbit),"=m" (ADDR)
+ :"=r" (oldbit),"+m" (ADDR)
:"Ir" (nr) : "memory");
return oldbit;
}
static int test_bit(int nr, const volatile void * addr);
#endif
-static inline int constant_test_bit(int nr, const volatile unsigned long *addr)
+static __always_inline int constant_test_bit(int nr, const volatile unsigned long *addr)
{
return ((1UL << (nr & 31)) & (addr[nr >> 5])) != 0;
}
-static __inline__ int variable_test_bit(int nr, const volatile unsigned long * addr)
+static inline int variable_test_bit(int nr, const volatile unsigned long * addr)
{
int oldbit;
* Returns the bit-number of the first zero bit, not the number of the byte
* containing a bit.
*/
-static __inline__ int find_first_zero_bit(const unsigned long *addr, unsigned size)
+static inline int find_first_zero_bit(const unsigned long *addr, unsigned size)
{
int d0, d1, d2;
int res;
"shll $3,%%edi\n\t"
"addl %%edi,%%edx"
:"=d" (res), "=&c" (d0), "=&D" (d1), "=&a" (d2)
- :"1" ((size + 31) >> 5), "2" (addr), "b" (addr));
+ :"1" ((size + 31) >> 5), "2" (addr), "b" (addr) : "memory");
return res;
}
/**
- * find_first_bit - find the first set bit in a memory region
- * @addr: The address to start the search at
+ * find_next_zero_bit - find the first zero bit in a memory region
+ * @addr: The address to base the search on
+ * @offset: The bitnumber to start searching at
* @size: The maximum size to search
+ */
+int find_next_zero_bit(const unsigned long *addr, int size, int offset);
+
+/**
+ * __ffs - find first bit in word.
+ * @word: The word to search
*
- * Returns the bit-number of the first set bit, not the number of the byte
- * containing a bit.
+ * Undefined if no bit exists, so code should check against 0 first.
*/
-static __inline__ int find_first_bit(const unsigned long *addr, unsigned size)
+static inline unsigned long __ffs(unsigned long word)
{
- int d0, d1;
- int res;
-
- /* This looks at memory. Mark it volatile to tell gcc not to move it around */
- __asm__ __volatile__(
- "xorl %%eax,%%eax\n\t"
- "repe; scasl\n\t"
- "jz 1f\n\t"
- "leal -4(%%edi),%%edi\n\t"
- "bsfl (%%edi),%%eax\n"
- "1:\tsubl %%ebx,%%edi\n\t"
- "shll $3,%%edi\n\t"
- "addl %%edi,%%eax"
- :"=a" (res), "=&c" (d0), "=&D" (d1)
- :"1" ((size + 31) >> 5), "2" (addr), "b" (addr));
- return res;
+ __asm__("bsfl %1,%0"
+ :"=r" (word)
+ :"rm" (word));
+ return word;
}
/**
- * find_next_zero_bit - find the first zero bit in a memory region
- * @addr: The address to base the search on
- * @offset: The bitnumber to start searching at
+ * find_first_bit - find the first set bit in a memory region
+ * @addr: The address to start the search at
* @size: The maximum size to search
+ *
+ * Returns the bit-number of the first set bit, not the number of the byte
+ * containing a bit.
*/
-static __inline__ int find_next_zero_bit(const unsigned long *addr, int size, int offset)
+static inline unsigned find_first_bit(const unsigned long *addr, unsigned size)
{
- unsigned long * p = ((unsigned long *) addr) + (offset >> 5);
- int set = 0, bit = offset & 31, res;
-
- if (bit) {
- /*
- * Look for zero in the first 32 bits.
- */
- __asm__("bsfl %1,%0\n\t"
- "jne 1f\n\t"
- "movl $32, %0\n"
- "1:"
- : "=r" (set)
- : "r" (~(*p >> bit)));
- if (set < (32 - bit))
- return set + offset;
- set = 32 - bit;
- p++;
+ unsigned x = 0;
+
+ while (x < size) {
+ unsigned long val = *addr++;
+ if (val)
+ return __ffs(val) + x;
+ x += (sizeof(*addr)<<3);
}
- /*
- * No zero yet, search remaining full bytes for a zero
- */
- res = find_first_zero_bit (p, size - 32 * (p - (unsigned long *) addr));
- return (offset + set + res);
+ return x;
}
/**
* @offset: The bitnumber to start searching at
* @size: The maximum size to search
*/
-static __inline__ int find_next_bit(const unsigned long *addr, int size, int offset)
-{
- const unsigned long *p = addr + (offset >> 5);
- int set = 0, bit = offset & 31, res;
-
- if (bit) {
- /*
- * Look for nonzero in the first 32 bits:
- */
- __asm__("bsfl %1,%0\n\t"
- "jne 1f\n\t"
- "movl $32, %0\n"
- "1:"
- : "=r" (set)
- : "r" (*p >> bit));
- if (set < (32 - bit))
- return set + offset;
- set = 32 - bit;
- p++;
- }
- /*
- * No set bit yet, search remaining full words for a bit
- */
- res = find_first_bit (p, size - 32 * (p - addr));
- return (offset + set + res);
-}
+int find_next_bit(const unsigned long *addr, int size, int offset);
/**
* ffz - find first zero in word.
*
* Undefined if no zero exists, so code should check against ~0UL first.
*/
-static __inline__ unsigned long ffz(unsigned long word)
+static inline unsigned long ffz(unsigned long word)
{
__asm__("bsfl %1,%0"
:"=r" (word)
return word;
}
-/**
- * __ffs - find first bit in word.
- * @word: The word to search
- *
- * Undefined if no bit exists, so code should check against 0 first.
- */
-static __inline__ unsigned long __ffs(unsigned long word)
-{
- __asm__("bsfl %1,%0"
- :"=r" (word)
- :"rm" (word));
- return word;
-}
-
-/*
- * fls: find last bit set.
- */
-
-#define fls(x) generic_fls(x)
-
#ifdef __KERNEL__
-/*
- * Every architecture must define this function. It's the fastest
- * way of searching a 140-bit bitmap where the first 100 bits are
- * unlikely to be set. It's guaranteed that at least one of the 140
- * bits is cleared.
- */
-static inline int sched_find_first_bit(const unsigned long *b)
-{
- if (unlikely(b[0]))
- return __ffs(b[0]);
- if (unlikely(b[1]))
- return __ffs(b[1]) + 32;
- if (unlikely(b[2]))
- return __ffs(b[2]) + 64;
- if (b[3])
- return __ffs(b[3]) + 96;
- return __ffs(b[4]) + 128;
-}
+#include <asm-generic/bitops/sched.h>
/**
* ffs - find first bit set
* the libc and compiler builtin ffs routines, therefore
* differs in spirit from the above ffz (man ffs).
*/
-static __inline__ int ffs(int x)
+static inline int ffs(int x)
{
int r;
}
/**
- * hweightN - returns the hamming weight of a N-bit word
- * @x: the word to weigh
+ * fls - find last bit set
+ * @x: the word to search
*
- * The Hamming Weight of a number is the total number of bits set in it.
+ * This is defined the same way as ffs.
*/
+static inline int fls(int x)
+{
+ int r;
-#define hweight32(x) generic_hweight32(x)
-#define hweight16(x) generic_hweight16(x)
-#define hweight8(x) generic_hweight8(x)
+ __asm__("bsrl %1,%0\n\t"
+ "jnz 1f\n\t"
+ "movl $-1,%0\n"
+ "1:" : "=r" (r) : "rm" (x));
+ return r+1;
+}
+
+#include <asm-generic/bitops/hweight.h>
#endif /* __KERNEL__ */
+#include <asm-generic/bitops/fls64.h>
+
#ifdef __KERNEL__
-#define ext2_set_bit(nr,addr) \
- __test_and_set_bit((nr),(unsigned long*)addr)
+#include <asm-generic/bitops/ext2-non-atomic.h>
+
#define ext2_set_bit_atomic(lock,nr,addr) \
test_and_set_bit((nr),(unsigned long*)addr)
-#define ext2_clear_bit(nr, addr) \
- __test_and_clear_bit((nr),(unsigned long*)addr)
#define ext2_clear_bit_atomic(lock,nr, addr) \
test_and_clear_bit((nr),(unsigned long*)addr)
-#define ext2_test_bit(nr, addr) test_bit((nr),(unsigned long*)addr)
-#define ext2_find_first_zero_bit(addr, size) \
- find_first_zero_bit((unsigned long*)addr, size)
-#define ext2_find_next_zero_bit(addr, size, off) \
- find_next_zero_bit((unsigned long*)addr, size, off)
-
-/* Bitmap functions for the minix filesystem. */
-#define minix_test_and_set_bit(nr,addr) __test_and_set_bit(nr,(void*)addr)
-#define minix_set_bit(nr,addr) __set_bit(nr,(void*)addr)
-#define minix_test_and_clear_bit(nr,addr) __test_and_clear_bit(nr,(void*)addr)
-#define minix_test_bit(nr,addr) test_bit(nr,(void*)addr)
-#define minix_find_first_zero_bit(addr,size) \
- find_first_zero_bit((void*)addr,size)
+
+#include <asm-generic/bitops/minix.h>
#endif /* __KERNEL__ */