return( (char *) s);
}
-#if 0
-#define __HAVE_ARCH_STRPBRK
-static inline char *strpbrk(const char *cs,const char *ct)
-{
- const char *sc1,*sc2;
-
- for( sc1 = cs; *sc1 != '\0'; ++sc1)
- for( sc2 = ct; *sc2 != '\0'; ++sc2)
- if (*sc1 == *sc2)
- return((char *) sc1);
- return( NULL );
-}
-#endif
-
-#if 0
-#define __HAVE_ARCH_STRSPN
-static inline size_t strspn(const char *s, const char *accept)
-{
- const char *p;
- const char *a;
- size_t count = 0;
-
- for (p = s; *p != '\0'; ++p)
- {
- for (a = accept; *a != '\0'; ++a)
- if (*p == *a)
- break;
- if (*a == '\0')
- return count;
- else
- ++count;
- }
-
- return count;
-}
-#endif
-
/* strstr !! */
#define __HAVE_ARCH_STRLEN
}
#define __HAVE_ARCH_MEMSET
-/*
- * This is really ugly, but its highly optimizatiable by the
- * compiler and is meant as compensation for gcc's missing
- * __builtin_memset(). For the 680[23]0 it might be worth considering
- * the optimal number of misaligned writes compared to the number of
- * tests'n'branches needed to align the destination address. The
- * 680[46]0 doesn't really care due to their copy-back caches.
- * 10/09/96 - Jes Sorensen
- */
-static inline void * __memset_g(void * s, int c, size_t count)
-{
- void *xs = s;
- size_t temp;
-
- if (!count)
- return xs;
-
- c &= 0xff;
- c |= c << 8;
- c |= c << 16;
-
- if (count < 36){
- long *ls = s;
-
- switch(count){
- case 32: case 33: case 34: case 35:
- *ls++ = c;
- case 28: case 29: case 30: case 31:
- *ls++ = c;
- case 24: case 25: case 26: case 27:
- *ls++ = c;
- case 20: case 21: case 22: case 23:
- *ls++ = c;
- case 16: case 17: case 18: case 19:
- *ls++ = c;
- case 12: case 13: case 14: case 15:
- *ls++ = c;
- case 8: case 9: case 10: case 11:
- *ls++ = c;
- case 4: case 5: case 6: case 7:
- *ls++ = c;
- break;
- default:
- break;
- }
- s = ls;
- if (count & 0x02){
- short *ss = s;
- *ss++ = c;
- s = ss;
- }
- if (count & 0x01){
- char *cs = s;
- *cs++ = c;
- s = cs;
- }
- return xs;
- }
-
- if ((long) s & 1)
- {
- char *cs = s;
- *cs++ = c;
- s = cs;
- count--;
- }
- if (count > 2 && (long) s & 2)
- {
- short *ss = s;
- *ss++ = c;
- s = ss;
- count -= 2;
- }
- temp = count >> 2;
- if (temp)
- {
- long *ls = s;
- temp--;
- do
- *ls++ = c;
- while (temp--);
- s = ls;
- }
- if (count & 2)
- {
- short *ss = s;
- *ss++ = c;
- s = ss;
- }
- if (count & 1)
- {
- char *cs = s;
- *cs = c;
- }
- return xs;
-}
-
-/*
- * __memset_page assumes that data is longword aligned. Most, if not
- * all, of these page sized memsets are performed on page aligned
- * areas, thus we do not need to check if the destination is longword
- * aligned. Of course we suffer a serious performance loss if this is
- * not the case but I think the risk of this ever happening is
- * extremely small. We spend a lot of time clearing pages in
- * get_empty_page() so I think it is worth it anyway. Besides, the
- * 680[46]0 do not really care about misaligned writes due to their
- * copy-back cache.
- *
- * The optimized case for the 680[46]0 is implemented using the move16
- * instruction. My tests showed that this implementation is 35-45%
- * faster than the original implementation using movel, the only
- * caveat is that the destination address must be 16-byte aligned.
- * 01/09/96 - Jes Sorensen
- */
-static inline void * __memset_page(void * s,int c,size_t count)
-{
- unsigned long data, tmp;
- void *xs = s;
-
- c = c & 255;
- data = c | (c << 8);
- data |= data << 16;
-
-#ifdef CPU_M68040_OR_M68060_ONLY
-
- if (((unsigned long) s) & 0x0f)
- __memset_g(s, c, count);
- else{
- unsigned long *sp = s;
- *sp++ = data;
- *sp++ = data;
- *sp++ = data;
- *sp++ = data;
-
- __asm__ __volatile__("1:\t"
- ".chip 68040\n\t"
- "move16 %2@+,%0@+\n\t"
- ".chip 68k\n\t"
- "subqw #8,%2\n\t"
- "subqw #8,%2\n\t"
- "dbra %1,1b\n\t"
- : "=a" (sp), "=d" (tmp)
- : "a" (s), "0" (sp), "1" ((count - 16) / 16 - 1)
- );
- }
-
-#else
- __asm__ __volatile__("1:\t"
- "movel %2,%0@+\n\t"
- "movel %2,%0@+\n\t"
- "movel %2,%0@+\n\t"
- "movel %2,%0@+\n\t"
- "movel %2,%0@+\n\t"
- "movel %2,%0@+\n\t"
- "movel %2,%0@+\n\t"
- "movel %2,%0@+\n\t"
- "dbra %1,1b\n\t"
- : "=a" (s), "=d" (tmp)
- : "d" (data), "0" (s), "1" (count / 32 - 1)
- );
-#endif
-
- return xs;
-}
-
-extern void *memset(void *,int,__kernel_size_t);
-
-#define __memset_const(s,c,count) \
-((count==PAGE_SIZE) ? \
- __memset_page((s),(c),(count)) : \
- __memset_g((s),(c),(count)))
-
-#define memset(s, c, count) \
-(__builtin_constant_p(count) ? \
- __memset_const((s),(c),(count)) : \
- __memset_g((s),(c),(count)))
+extern void *memset(void *, int, __kernel_size_t);
+#define memset(d, c, n) __builtin_memset(d, c, n)
#define __HAVE_ARCH_MEMCPY
-extern void * memcpy(void *, const void *, size_t );
-/*
- * __builtin_memcpy() does not handle page-sized memcpys very well,
- * thus following the same assumptions as for page-sized memsets, this
- * function copies page-sized areas using an unrolled loop, without
- * considering alignment.
- *
- * For the 680[46]0 only kernels we use the move16 instruction instead
- * as it writes through the data-cache, invalidating the cache-lines
- * touched. In this way we do not use up the entire data-cache (well,
- * half of it on the 68060) by copying a page. An unrolled loop of two
- * move16 instructions seem to the fastest. The only caveat is that
- * both source and destination must be 16-byte aligned, if not we fall
- * back to the generic memcpy function. - Jes
- */
-static inline void * __memcpy_page(void * to, const void * from, size_t count)
-{
- unsigned long tmp;
- void *xto = to;
-
-#ifdef CPU_M68040_OR_M68060_ONLY
-
- if (((unsigned long) to | (unsigned long) from) & 0x0f)
- return memcpy(to, from, count);
-
- __asm__ __volatile__("1:\t"
- ".chip 68040\n\t"
- "move16 %1@+,%0@+\n\t"
- "move16 %1@+,%0@+\n\t"
- ".chip 68k\n\t"
- "dbra %2,1b\n\t"
- : "=a" (to), "=a" (from), "=d" (tmp)
- : "0" (to), "1" (from) , "2" (count / 32 - 1)
- );
-#else
- __asm__ __volatile__("1:\t"
- "movel %1@+,%0@+\n\t"
- "movel %1@+,%0@+\n\t"
- "movel %1@+,%0@+\n\t"
- "movel %1@+,%0@+\n\t"
- "movel %1@+,%0@+\n\t"
- "movel %1@+,%0@+\n\t"
- "movel %1@+,%0@+\n\t"
- "movel %1@+,%0@+\n\t"
- "dbra %2,1b\n\t"
- : "=a" (to), "=a" (from), "=d" (tmp)
- : "0" (to), "1" (from) , "2" (count / 32 - 1)
- );
-#endif
- return xto;
-}
-
-#define __memcpy_const(to, from, n) \
-((n==PAGE_SIZE) ? \
- __memcpy_page((to),(from),(n)) : \
- __builtin_memcpy((to),(from),(n)))
-
-#define memcpy(to, from, n) \
-(__builtin_constant_p(n) ? \
- __memcpy_const((to),(from),(n)) : \
- memcpy((to),(from),(n)))
+extern void *memcpy(void *, const void *, __kernel_size_t);
+#define memcpy(d, s, n) __builtin_memcpy(d, s, n)
#define __HAVE_ARCH_MEMMOVE
-static inline void * memmove(void * dest,const void * src, size_t n)
-{
- void *xdest = dest;
- size_t temp;
-
- if (!n)
- return xdest;
-
- if (dest < src)
- {
- if ((long) dest & 1)
- {
- char *cdest = dest;
- const char *csrc = src;
- *cdest++ = *csrc++;
- dest = cdest;
- src = csrc;
- n--;
- }
- if (n > 2 && (long) dest & 2)
- {
- short *sdest = dest;
- const short *ssrc = src;
- *sdest++ = *ssrc++;
- dest = sdest;
- src = ssrc;
- n -= 2;
- }
- temp = n >> 2;
- if (temp)
- {
- long *ldest = dest;
- const long *lsrc = src;
- temp--;
- do
- *ldest++ = *lsrc++;
- while (temp--);
- dest = ldest;
- src = lsrc;
- }
- if (n & 2)
- {
- short *sdest = dest;
- const short *ssrc = src;
- *sdest++ = *ssrc++;
- dest = sdest;
- src = ssrc;
- }
- if (n & 1)
- {
- char *cdest = dest;
- const char *csrc = src;
- *cdest = *csrc;
- }
- }
- else
- {
- dest = (char *) dest + n;
- src = (const char *) src + n;
- if ((long) dest & 1)
- {
- char *cdest = dest;
- const char *csrc = src;
- *--cdest = *--csrc;
- dest = cdest;
- src = csrc;
- n--;
- }
- if (n > 2 && (long) dest & 2)
- {
- short *sdest = dest;
- const short *ssrc = src;
- *--sdest = *--ssrc;
- dest = sdest;
- src = ssrc;
- n -= 2;
- }
- temp = n >> 2;
- if (temp)
- {
- long *ldest = dest;
- const long *lsrc = src;
- temp--;
- do
- *--ldest = *--lsrc;
- while (temp--);
- dest = ldest;
- src = lsrc;
- }
- if (n & 2)
- {
- short *sdest = dest;
- const short *ssrc = src;
- *--sdest = *--ssrc;
- dest = sdest;
- src = ssrc;
- }
- if (n & 1)
- {
- char *cdest = dest;
- const char *csrc = src;
- *--cdest = *--csrc;
- }
- }
- return xdest;
-}
+extern void *memmove(void *, const void *, __kernel_size_t);
#define __HAVE_ARCH_MEMCMP
-extern int memcmp(const void * ,const void * ,size_t );
-#define memcmp(cs, ct, n) \
-(__builtin_constant_p(n) ? \
- __builtin_memcmp((cs),(ct),(n)) : \
- memcmp((cs),(ct),(n)))
-
-#define __HAVE_ARCH_MEMCHR
-static inline void *memchr(const void *cs, int c, size_t count)
-{
- /* Someone else can optimize this, I don't care - tonym@mac.linux-m68k.org */
- unsigned char *ret = (unsigned char *)cs;
- for(;count>0;count--,ret++)
- if(*ret == c) return ret;
-
- return NULL;
-}
+extern int memcmp(const void *, const void *, __kernel_size_t);
+#define memcmp(d, s, n) __builtin_memcmp(d, s, n)
#endif /* _M68K_STRING_H_ */
git://git.onelab.eu / linux-2.6.git / blobdiff