#ifndef _ASM_MIPSREGS_H
#define _ASM_MIPSREGS_H
-#include <linux/config.h>
#include <linux/linkage.h>
#include <asm/hazards.h>
#define ST0_DL (_ULCAST_(1) << 24)
/*
- * Enable the MIPS DSP ASE
+ * Enable the MIPS MDMX and DSP ASEs
*/
#define ST0_MX 0x01000000
/* Bits specific to the VR41xx. */
#define VR41_CONF_CS (_ULCAST_(1) << 12)
+#define VR41_CONF_P4K (_ULCAST_(1) << 13)
+#define VR41_CONF_BP (_ULCAST_(1) << 16)
#define VR41_CONF_M16 (_ULCAST_(1) << 20)
#define VR41_CONF_AD (_ULCAST_(1) << 23)
#define MIPS_FPIR_L (_ULCAST_(1) << 21)
#define MIPS_FPIR_F64 (_ULCAST_(1) << 22)
-/*
- * R10000 performance counter definitions.
- *
- * FIXME: The R10000 performance counter opens a nice way to implement CPU
- * time accounting with a precission of one cycle. I don't have
- * R10000 silicon but just a manual, so ...
- */
-
-/*
- * Events counted by counter #0
- */
-#define CE0_CYCLES 0
-#define CE0_INSN_ISSUED 1
-#define CE0_LPSC_ISSUED 2
-#define CE0_S_ISSUED 3
-#define CE0_SC_ISSUED 4
-#define CE0_SC_FAILED 5
-#define CE0_BRANCH_DECODED 6
-#define CE0_QW_WB_SECONDARY 7
-#define CE0_CORRECTED_ECC_ERRORS 8
-#define CE0_ICACHE_MISSES 9
-#define CE0_SCACHE_I_MISSES 10
-#define CE0_SCACHE_I_WAY_MISSPREDICTED 11
-#define CE0_EXT_INTERVENTIONS_REQ 12
-#define CE0_EXT_INVALIDATE_REQ 13
-#define CE0_VIRTUAL_COHERENCY_COND 14
-#define CE0_INSN_GRADUATED 15
-
-/*
- * Events counted by counter #1
- */
-#define CE1_CYCLES 0
-#define CE1_INSN_GRADUATED 1
-#define CE1_LPSC_GRADUATED 2
-#define CE1_S_GRADUATED 3
-#define CE1_SC_GRADUATED 4
-#define CE1_FP_INSN_GRADUATED 5
-#define CE1_QW_WB_PRIMARY 6
-#define CE1_TLB_REFILL 7
-#define CE1_BRANCH_MISSPREDICTED 8
-#define CE1_DCACHE_MISS 9
-#define CE1_SCACHE_D_MISSES 10
-#define CE1_SCACHE_D_WAY_MISSPREDICTED 11
-#define CE1_EXT_INTERVENTION_HITS 12
-#define CE1_EXT_INVALIDATE_REQ 13
-#define CE1_SP_HINT_TO_CEXCL_SC_BLOCKS 14
-#define CE1_SP_HINT_TO_SHARED_SC_BLOCKS 15
-
-/*
- * These flags define in which privilege mode the counters count events
- */
-#define CEB_USER 8 /* Count events in user mode, EXL = ERL = 0 */
-#define CEB_SUPERVISOR 4 /* Count events in supvervisor mode EXL = ERL = 0 */
-#define CEB_KERNEL 2 /* Count events in kernel mode EXL = ERL = 0 */
-#define CEB_EXL 1 /* Count events with EXL = 1, ERL = 0 */
-
#ifndef __ASSEMBLY__
/*
#define read_c0_cache() __read_32bit_c0_register($7, 0) /* TX39xx */
#define write_c0_cache(val) __write_32bit_c0_register($7, 0, val)
+#define read_c0_badvaddr() __read_ulong_c0_register($8, 0)
+#define write_c0_badvaddr(val) __write_ulong_c0_register($8, 0, val)
+
#define read_c0_count() __read_32bit_c0_register($9, 0)
#define write_c0_count(val) __write_32bit_c0_register($9, 0, val)
#define write_c0_compare3(val) __write_32bit_c0_register($11, 7, val)
#define read_c0_status() __read_32bit_c0_register($12, 0)
+#ifdef CONFIG_MIPS_MT_SMTC
+#define write_c0_status(val) \
+do { \
+ __write_32bit_c0_register($12, 0, val); \
+ __ehb(); \
+} while (0)
+#else
+/*
+ * Legacy non-SMTC code, which may be hazardous
+ * but which might not support EHB
+ */
#define write_c0_status(val) __write_32bit_c0_register($12, 0, val)
+#endif /* CONFIG_MIPS_MT_SMTC */
#define read_c0_cause() __read_32bit_c0_register($13, 0)
#define write_c0_cause(val) __write_32bit_c0_register($13, 0, val)
#define read_c0_taglo() __read_32bit_c0_register($28, 0)
#define write_c0_taglo(val) __write_32bit_c0_register($28, 0, val)
+#define read_c0_dtaglo() __read_32bit_c0_register($28, 2)
+#define write_c0_dtaglo(val) __write_32bit_c0_register($28, 2, val)
+
#define read_c0_taghi() __read_32bit_c0_register($29, 0)
#define write_c0_taghi(val) __write_32bit_c0_register($29, 0, val)
/*
* Manipulate bits in a c0 register.
*/
+#ifndef CONFIG_MIPS_MT_SMTC
+/*
+ * SMTC Linux requires shutting-down microthread scheduling
+ * during CP0 register read-modify-write sequences.
+ */
#define __BUILD_SET_C0(name) \
static inline unsigned int \
set_c0_##name(unsigned int set) \
return res; \
}
+#else /* SMTC versions that manage MT scheduling */
+
+#include <linux/irqflags.h>
+
+/*
+ * This is a duplicate of dmt() in mipsmtregs.h to avoid problems with
+ * header file recursion.
+ */
+static inline unsigned int __dmt(void)
+{
+ int res;
+
+ __asm__ __volatile__(
+ " .set push \n"
+ " .set mips32r2 \n"
+ " .set noat \n"
+ " .word 0x41610BC1 # dmt $1 \n"
+ " ehb \n"
+ " move %0, $1 \n"
+ " .set pop \n"
+ : "=r" (res));
+
+ instruction_hazard();
+
+ return res;
+}
+
+#define __VPECONTROL_TE_SHIFT 15
+#define __VPECONTROL_TE (1UL << __VPECONTROL_TE_SHIFT)
+
+#define __EMT_ENABLE __VPECONTROL_TE
+
+static inline void __emt(unsigned int previous)
+{
+ if ((previous & __EMT_ENABLE))
+ __asm__ __volatile__(
+ " .set mips32r2 \n"
+ " .word 0x41600be1 # emt \n"
+ " ehb \n"
+ " .set mips0 \n");
+}
+
+static inline void __ehb(void)
+{
+ __asm__ __volatile__(
+ " .set mips32r2 \n"
+ " ehb \n" " .set mips0 \n");
+}
+
+/*
+ * Note that local_irq_save/restore affect TC-specific IXMT state,
+ * not Status.IE as in non-SMTC kernel.
+ */
+
+#define __BUILD_SET_C0(name) \
+static inline unsigned int \
+set_c0_##name(unsigned int set) \
+{ \
+ unsigned int res; \
+ unsigned int omt; \
+ unsigned int flags; \
+ \
+ local_irq_save(flags); \
+ omt = __dmt(); \
+ res = read_c0_##name(); \
+ res |= set; \
+ write_c0_##name(res); \
+ __emt(omt); \
+ local_irq_restore(flags); \
+ \
+ return res; \
+} \
+ \
+static inline unsigned int \
+clear_c0_##name(unsigned int clear) \
+{ \
+ unsigned int res; \
+ unsigned int omt; \
+ unsigned int flags; \
+ \
+ local_irq_save(flags); \
+ omt = __dmt(); \
+ res = read_c0_##name(); \
+ res &= ~clear; \
+ write_c0_##name(res); \
+ __emt(omt); \
+ local_irq_restore(flags); \
+ \
+ return res; \
+} \
+ \
+static inline unsigned int \
+change_c0_##name(unsigned int change, unsigned int new) \
+{ \
+ unsigned int res; \
+ unsigned int omt; \
+ unsigned int flags; \
+ \
+ local_irq_save(flags); \
+ \
+ omt = __dmt(); \
+ res = read_c0_##name(); \
+ res &= ~change; \
+ res |= (new & change); \
+ write_c0_##name(res); \
+ __emt(omt); \
+ local_irq_restore(flags); \
+ \
+ return res; \
+}
+#endif
+
__BUILD_SET_C0(status)
__BUILD_SET_C0(cause)
__BUILD_SET_C0(config)
git://git.onelab.eu / linux-2.6.git / blobdiff