--- /dev/null
+#ifndef _ASM_PARISC_ROPES_H_
+#define _ASM_PARISC_ROPES_H_
+
+#include <asm-parisc/parisc-device.h>
+
+#ifdef CONFIG_64BIT
+/* "low end" PA8800 machines use ZX1 chipset: PAT PDC and only run 64-bit */
+#define ZX1_SUPPORT
+#endif
+
+#ifdef CONFIG_PROC_FS
+/* depends on proc fs support. But costs CPU performance */
+#undef SBA_COLLECT_STATS
+#endif
+
+/*
+** The number of pdir entries to "free" before issuing
+** a read to PCOM register to flush out PCOM writes.
+** Interacts with allocation granularity (ie 4 or 8 entries
+** allocated and free'd/purged at a time might make this
+** less interesting).
+*/
+#define DELAYED_RESOURCE_CNT 16
+
+#define MAX_IOC 2 /* per Ike. Pluto/Astro only have 1. */
+#define ROPES_PER_IOC 8 /* per Ike half or Pluto/Astro */
+
+struct ioc {
+ void __iomem *ioc_hpa; /* I/O MMU base address */
+ char *res_map; /* resource map, bit == pdir entry */
+ u64 *pdir_base; /* physical base address */
+ unsigned long ibase; /* pdir IOV Space base - shared w/lba_pci */
+ unsigned long imask; /* pdir IOV Space mask - shared w/lba_pci */
+#ifdef ZX1_SUPPORT
+ unsigned long iovp_mask; /* help convert IOVA to IOVP */
+#endif
+ unsigned long *res_hint; /* next avail IOVP - circular search */
+ spinlock_t res_lock;
+ unsigned int res_bitshift; /* from the LEFT! */
+ unsigned int res_size; /* size of resource map in bytes */
+#ifdef SBA_HINT_SUPPORT
+/* FIXME : DMA HINTs not used */
+ unsigned long hint_mask_pdir; /* bits used for DMA hints */
+ unsigned int hint_shift_pdir;
+#endif
+#if DELAYED_RESOURCE_CNT > 0
+ int saved_cnt;
+ struct sba_dma_pair {
+ dma_addr_t iova;
+ size_t size;
+ } saved[DELAYED_RESOURCE_CNT];
+#endif
+
+#ifdef SBA_COLLECT_STATS
+#define SBA_SEARCH_SAMPLE 0x100
+ unsigned long avg_search[SBA_SEARCH_SAMPLE];
+ unsigned long avg_idx; /* current index into avg_search */
+ unsigned long used_pages;
+ unsigned long msingle_calls;
+ unsigned long msingle_pages;
+ unsigned long msg_calls;
+ unsigned long msg_pages;
+ unsigned long usingle_calls;
+ unsigned long usingle_pages;
+ unsigned long usg_calls;
+ unsigned long usg_pages;
+#endif
+ /* STUFF We don't need in performance path */
+ unsigned int pdir_size; /* in bytes, determined by IOV Space size */
+};
+
+struct sba_device {
+ struct sba_device *next; /* list of SBA's in system */
+ struct parisc_device *dev; /* dev found in bus walk */
+ const char *name;
+ void __iomem *sba_hpa; /* base address */
+ spinlock_t sba_lock;
+ unsigned int flags; /* state/functionality enabled */
+ unsigned int hw_rev; /* HW revision of chip */
+
+ struct resource chip_resv; /* MMIO reserved for chip */
+ struct resource iommu_resv; /* MMIO reserved for iommu */
+
+ unsigned int num_ioc; /* number of on-board IOC's */
+ struct ioc ioc[MAX_IOC];
+};
+
+#define ASTRO_RUNWAY_PORT 0x582
+#define IKE_MERCED_PORT 0x803
+#define REO_MERCED_PORT 0x804
+#define REOG_MERCED_PORT 0x805
+#define PLUTO_MCKINLEY_PORT 0x880
+
+static inline int IS_ASTRO(struct parisc_device *d) {
+ return d->id.hversion == ASTRO_RUNWAY_PORT;
+}
+
+static inline int IS_IKE(struct parisc_device *d) {
+ return d->id.hversion == IKE_MERCED_PORT;
+}
+
+static inline int IS_PLUTO(struct parisc_device *d) {
+ return d->id.hversion == PLUTO_MCKINLEY_PORT;
+}
+
+#define PLUTO_IOVA_BASE (1UL*1024*1024*1024) /* 1GB */
+#define PLUTO_IOVA_SIZE (1UL*1024*1024*1024) /* 1GB */
+#define PLUTO_GART_SIZE (PLUTO_IOVA_SIZE / 2)
+
+#define SBA_PDIR_VALID_BIT 0x8000000000000000ULL
+
+#define SBA_AGPGART_COOKIE 0x0000badbadc0ffeeULL
+
+#define SBA_FUNC_ID 0x0000 /* function id */
+#define SBA_FCLASS 0x0008 /* function class, bist, header, rev... */
+
+#define SBA_FUNC_SIZE 4096 /* SBA configuration function reg set */
+
+#define ASTRO_IOC_OFFSET (32 * SBA_FUNC_SIZE)
+#define PLUTO_IOC_OFFSET (1 * SBA_FUNC_SIZE)
+/* Ike's IOC's occupy functions 2 and 3 */
+#define IKE_IOC_OFFSET(p) ((p+2) * SBA_FUNC_SIZE)
+
+#define IOC_CTRL 0x8 /* IOC_CTRL offset */
+#define IOC_CTRL_TC (1 << 0) /* TOC Enable */
+#define IOC_CTRL_CE (1 << 1) /* Coalesce Enable */
+#define IOC_CTRL_DE (1 << 2) /* Dillon Enable */
+#define IOC_CTRL_RM (1 << 8) /* Real Mode */
+#define IOC_CTRL_NC (1 << 9) /* Non Coherent Mode */
+#define IOC_CTRL_D4 (1 << 11) /* Disable 4-byte coalescing */
+#define IOC_CTRL_DD (1 << 13) /* Disable distr. LMMIO range coalescing */
+
+/*
+** Offsets into MBIB (Function 0 on Ike and hopefully Astro)
+** Firmware programs this stuff. Don't touch it.
+*/
+#define LMMIO_DIRECT0_BASE 0x300
+#define LMMIO_DIRECT0_MASK 0x308
+#define LMMIO_DIRECT0_ROUTE 0x310
+
+#define LMMIO_DIST_BASE 0x360
+#define LMMIO_DIST_MASK 0x368
+#define LMMIO_DIST_ROUTE 0x370
+
+#define IOS_DIST_BASE 0x390
+#define IOS_DIST_MASK 0x398
+#define IOS_DIST_ROUTE 0x3A0
+
+#define IOS_DIRECT_BASE 0x3C0
+#define IOS_DIRECT_MASK 0x3C8
+#define IOS_DIRECT_ROUTE 0x3D0
+
+/*
+** Offsets into I/O TLB (Function 2 and 3 on Ike)
+*/
+#define ROPE0_CTL 0x200 /* "regbus pci0" */
+#define ROPE1_CTL 0x208
+#define ROPE2_CTL 0x210
+#define ROPE3_CTL 0x218
+#define ROPE4_CTL 0x220
+#define ROPE5_CTL 0x228
+#define ROPE6_CTL 0x230
+#define ROPE7_CTL 0x238
+
+#define IOC_ROPE0_CFG 0x500 /* pluto only */
+#define IOC_ROPE_AO 0x10 /* Allow "Relaxed Ordering" */
+
+#define HF_ENABLE 0x40
+
+#define IOC_IBASE 0x300 /* IO TLB */
+#define IOC_IMASK 0x308
+#define IOC_PCOM 0x310
+#define IOC_TCNFG 0x318
+#define IOC_PDIR_BASE 0x320
+
+/*
+** IOC supports 4/8/16/64KB page sizes (see TCNFG register)
+** It's safer (avoid memory corruption) to keep DMA page mappings
+** equivalently sized to VM PAGE_SIZE.
+**
+** We really can't avoid generating a new mapping for each
+** page since the Virtual Coherence Index has to be generated
+** and updated for each page.
+**
+** PAGE_SIZE could be greater than IOVP_SIZE. But not the inverse.
+*/
+#define IOVP_SIZE PAGE_SIZE
+#define IOVP_SHIFT PAGE_SHIFT
+#define IOVP_MASK PAGE_MASK
+
+#define SBA_PERF_CFG 0x708 /* Performance Counter stuff */
+#define SBA_PERF_MASK1 0x718
+#define SBA_PERF_MASK2 0x730
+
+/*
+** Offsets into PCI Performance Counters (functions 12 and 13)
+** Controlled by PERF registers in function 2 & 3 respectively.
+*/
+#define SBA_PERF_CNT1 0x200
+#define SBA_PERF_CNT2 0x208
+#define SBA_PERF_CNT3 0x210
+
+/*
+** lba_device: Per instance Elroy data structure
+*/
+struct lba_device {
+ struct pci_hba_data hba;
+
+ spinlock_t lba_lock;
+ void *iosapic_obj;
+
+#ifdef CONFIG_64BIT
+ void __iomem *iop_base; /* PA_VIEW - for IO port accessor funcs */
+#endif
+
+ int flags; /* state/functionality enabled */
+ int hw_rev; /* HW revision of chip */
+};
+
+#define ELROY_HVERS 0x782
+#define MERCURY_HVERS 0x783
+#define QUICKSILVER_HVERS 0x784
+
+static inline int IS_ELROY(struct parisc_device *d) {
+ return (d->id.hversion == ELROY_HVERS);
+}
+
+static inline int IS_MERCURY(struct parisc_device *d) {
+ return (d->id.hversion == MERCURY_HVERS);
+}
+
+static inline int IS_QUICKSILVER(struct parisc_device *d) {
+ return (d->id.hversion == QUICKSILVER_HVERS);
+}
+
+static inline int agp_mode_mercury(void __iomem *hpa) {
+ u64 bus_mode;
+
+ bus_mode = readl(hpa + 0x0620);
+ if (bus_mode & 1)
+ return 1;
+
+ return 0;
+}
+
+/*
+** I/O SAPIC init function
+** Caller knows where an I/O SAPIC is. LBA has an integrated I/O SAPIC.
+** Call setup as part of per instance initialization.
+** (ie *not* init_module() function unless only one is present.)
+** fixup_irq is to initialize PCI IRQ line support and
+** virtualize pcidev->irq value. To be called by pci_fixup_bus().
+*/
+extern void *iosapic_register(unsigned long hpa);
+extern int iosapic_fixup_irq(void *obj, struct pci_dev *pcidev);
+
+#define LBA_FUNC_ID 0x0000 /* function id */
+#define LBA_FCLASS 0x0008 /* function class, bist, header, rev... */
+#define LBA_CAPABLE 0x0030 /* capabilities register */
+
+#define LBA_PCI_CFG_ADDR 0x0040 /* poke CFG address here */
+#define LBA_PCI_CFG_DATA 0x0048 /* read or write data here */
+
+#define LBA_PMC_MTLT 0x0050 /* Firmware sets this - read only. */
+#define LBA_FW_SCRATCH 0x0058 /* Firmware writes the PCI bus number here. */
+#define LBA_ERROR_ADDR 0x0070 /* On error, address gets logged here */
+
+#define LBA_ARB_MASK 0x0080 /* bit 0 enable arbitration. PAT/PDC enables */
+#define LBA_ARB_PRI 0x0088 /* firmware sets this. */
+#define LBA_ARB_MODE 0x0090 /* firmware sets this. */
+#define LBA_ARB_MTLT 0x0098 /* firmware sets this. */
+
+#define LBA_MOD_ID 0x0100 /* Module ID. PDC_PAT_CELL reports 4 */
+
+#define LBA_STAT_CTL 0x0108 /* Status & Control */
+#define LBA_BUS_RESET 0x01 /* Deassert PCI Bus Reset Signal */
+#define CLEAR_ERRLOG 0x10 /* "Clear Error Log" cmd */
+#define CLEAR_ERRLOG_ENABLE 0x20 /* "Clear Error Log" Enable */
+#define HF_ENABLE 0x40 /* enable HF mode (default is -1 mode) */
+
+#define LBA_LMMIO_BASE 0x0200 /* < 4GB I/O address range */
+#define LBA_LMMIO_MASK 0x0208
+
+#define LBA_GMMIO_BASE 0x0210 /* > 4GB I/O address range */
+#define LBA_GMMIO_MASK 0x0218
+
+#define LBA_WLMMIO_BASE 0x0220 /* All < 4GB ranges under the same *SBA* */
+#define LBA_WLMMIO_MASK 0x0228
+
+#define LBA_WGMMIO_BASE 0x0230 /* All > 4GB ranges under the same *SBA* */
+#define LBA_WGMMIO_MASK 0x0238
+
+#define LBA_IOS_BASE 0x0240 /* I/O port space for this LBA */
+#define LBA_IOS_MASK 0x0248
+
+#define LBA_ELMMIO_BASE 0x0250 /* Extra LMMIO range */
+#define LBA_ELMMIO_MASK 0x0258
+
+#define LBA_EIOS_BASE 0x0260 /* Extra I/O port space */
+#define LBA_EIOS_MASK 0x0268
+
+#define LBA_GLOBAL_MASK 0x0270 /* Mercury only: Global Address Mask */
+#define LBA_DMA_CTL 0x0278 /* firmware sets this */
+
+#define LBA_IBASE 0x0300 /* SBA DMA support */
+#define LBA_IMASK 0x0308
+
+/* FIXME: ignore DMA Hint stuff until we can measure performance */
+#define LBA_HINT_CFG 0x0310
+#define LBA_HINT_BASE 0x0380 /* 14 registers at every 8 bytes. */
+
+#define LBA_BUS_MODE 0x0620
+
+/* ERROR regs are needed for config cycle kluges */
+#define LBA_ERROR_CONFIG 0x0680
+#define LBA_SMART_MODE 0x20
+#define LBA_ERROR_STATUS 0x0688
+#define LBA_ROPE_CTL 0x06A0
+
+#define LBA_IOSAPIC_BASE 0x800 /* Offset of IRQ logic */
+
+#endif /*_ASM_PARISC_ROPES_H_*/
git://git.onelab.eu / linux-2.6.git / blobdiff