This commit was manufactured by cvs2svn to create branch 'vserver'.

[linux-2.6.git] / include / asm-sh / landisk / iodata_landisk.h

diff --git a/include/asm-sh/landisk/iodata_landisk.h b/include/asm-sh/landisk/iodata_landisk.h
new file mode 100644 (file)
index 0000000..c74d3c7
--- /dev/null
+++ b/include/asm-sh/landisk/iodata_landisk.h
@@ -0,0 +1,79 @@
+#ifndef __ASM_SH_IODATA_LANDISK_H
+#define __ASM_SH_IODATA_LANDISK_H
+
+/*
+ * linux/include/asm-sh/landisk/iodata_landisk.h
+ *
+ * Copyright (C) 2000  Atom Create Engineering Co., Ltd.
+ *
+ * IO-DATA LANDISK support
+ */
+
+/* Box specific addresses.  */
+
+#define PA_USB         0xa4000000      /* USB Controller M66590 */
+
+#define PA_ATARST      0xb0000000      /* ATA/FATA Access Control Register */
+#define PA_LED         0xb0000001      /* LED Control Register */
+#define PA_STATUS      0xb0000002      /* Switch Status Register */
+#define PA_SHUTDOWN    0xb0000003      /* Shutdown Control Register */
+#define PA_PCIPME      0xb0000004      /* PCI PME Status Register */
+#define PA_IMASK       0xb0000005      /* Interrupt Mask Register */
+/* 2003.10.31 I-O DATA NSD NWG add.    for shutdown port clear */
+#define PA_PWRINT_CLR  0xb0000006      /* Shutdown Interrupt clear Register */
+
+#define PA_LCD_CLRDSP  0x00            /* LCD Clear Display Offset */
+#define PA_LCD_RTNHOME 0x00            /* LCD Return Home Offset */
+#define PA_LCD_ENTMODE 0x00            /* LCD Entry Mode Offset */
+#define PA_LCD_DSPCTL  0x00            /* LCD Display ON/OFF Control Offset */
+#define PA_LCD_FUNC    0x00            /* LCD Function Set Offset */
+#define PA_LCD_CGRAM   0x00            /* LCD Set CGRAM Address Offset */
+#define PA_LCD_DDRAM   0x00            /* LCD Set DDRAM Address Offset */
+#define PA_LCD_RDFLAG  0x01            /* LCD Read Busy Flag Offset */
+#define PA_LCD_WTDATA  0x02            /* LCD Write Datat to RAM Offset */
+#define PA_LCD_RDDATA  0x03            /* LCD Read Data from RAM Offset */
+#define PA_PIDE_OFFSET 0x40            /* CF IDE Offset */
+#define PA_SIDE_OFFSET 0x40            /* HDD IDE Offset */
+
+#define IRQ_PCIINTA    5               /* PCI INTA IRQ */
+#define IRQ_PCIINTB    6               /* PCI INTB IRQ */
+#define IRQ_PCIINDC    7               /* PCI INTC IRQ */
+#define IRQ_PCIINTD    8               /* PCI INTD IRQ */
+#define IRQ_ATA                9               /* ATA IRQ */
+#define IRQ_FATA       10              /* FATA IRQ */
+#define IRQ_POWER      11              /* Power Switch IRQ */
+#define IRQ_BUTTON     12              /* USL-5P Button IRQ */
+#define IRQ_FAULT      13              /* USL-5P Fault  IRQ */
+
+#define SHUTDOWN_BTN_MAJOR     99      /* Shutdown button device major no. */
+
+#define SHUTDOWN_LOOP_CNT      5       /* Shutdown button Detection loop */
+#define SHUTDOWN_DELAY         200     /* Shutdown button delay value(ms) */
+
+
+/* added by kogiidena */
+/*
+ *  landisk_ledparam
+ *
+ * led  ------10 -6543210 -6543210 -6543210
+ *     |000000..|0.......|0.......|U.......|
+ *     |  HARD  |fastblik| blink  |   on   |
+ *
+ *   led0: power       U:update flag
+ *   led1: error
+ *   led2: usb1
+ *   led3: usb2
+ *   led4: usb3
+ *   led5: usb4
+ *   led6: usb5
+ *
+ */
+extern int landisk_ledparam;    /* from setup.c */
+extern int landisk_buzzerparam; /* from setup.c */
+extern int landisk_arch;        /* from setup.c */
+
+#define __IO_PREFIX landisk
+#include <asm/io_generic.h>
+
+#endif  /* __ASM_SH_IODATA_LANDISK_H */
+