/* cpudata.h: Per-cpu parameters.
*
- * Copyright (C) 2003, 2005, 2006 David S. Miller (davem@davemloft.net)
+ * Copyright (C) 2003, 2005 David S. Miller (davem@redhat.com)
*/
#ifndef _SPARC64_CPUDATA_H
#define _SPARC64_CPUDATA_H
-#include <asm/hypervisor.h>
-#include <asm/asi.h>
-
-#ifndef __ASSEMBLY__
-
#include <linux/percpu.h>
-#include <linux/threads.h>
typedef struct {
/* Dcache line 1 */
unsigned int __softirq_pending; /* must be 1st, see rtrap.S */
unsigned int multiplier;
unsigned int counter;
- unsigned int __pad1;
+ unsigned int idle_volume;
unsigned long clock_tick; /* %tick's per second */
unsigned long udelay_val;
- /* Dcache line 2, rarely used */
+ /* Dcache line 2 */
+ unsigned int pgcache_size;
+ unsigned int __pad1;
+ unsigned long *pte_cache[2];
+ unsigned long *pgd_cache;
+
+ /* Dcache line 3, rarely used */
unsigned int dcache_size;
unsigned int dcache_line_size;
unsigned int icache_size;
unsigned int icache_line_size;
unsigned int ecache_size;
unsigned int ecache_line_size;
+ unsigned int __pad2;
unsigned int __pad3;
- unsigned int __pad4;
} cpuinfo_sparc;
DECLARE_PER_CPU(cpuinfo_sparc, __cpu_data);
#define cpu_data(__cpu) per_cpu(__cpu_data, (__cpu))
#define local_cpu_data() __get_cpu_var(__cpu_data)
-/* Trap handling code needs to get at a few critical values upon
- * trap entry and to process TSB misses. These cannot be in the
- * per_cpu() area as we really need to lock them into the TLB and
- * thus make them part of the main kernel image. As a result we
- * try to make this as small as possible.
- *
- * This is padded out and aligned to 64-bytes to avoid false sharing
- * on SMP.
- */
-
-/* If you modify the size of this structure, please update
- * TRAP_BLOCK_SZ_SHIFT below.
- */
-struct thread_info;
-struct trap_per_cpu {
-/* D-cache line 1: Basic thread information, cpu and device mondo queues */
- struct thread_info *thread;
- unsigned long pgd_paddr;
- unsigned long cpu_mondo_pa;
- unsigned long dev_mondo_pa;
-
-/* D-cache line 2: Error Mondo Queue and kernel buffer pointers */
- unsigned long resum_mondo_pa;
- unsigned long resum_kernel_buf_pa;
- unsigned long nonresum_mondo_pa;
- unsigned long nonresum_kernel_buf_pa;
-
-/* Dcache lines 3, 4, 5, and 6: Hypervisor Fault Status */
- struct hv_fault_status fault_info;
-
-/* Dcache line 7: Physical addresses of CPU send mondo block and CPU list. */
- unsigned long cpu_mondo_block_pa;
- unsigned long cpu_list_pa;
- unsigned long tsb_huge;
- unsigned long tsb_huge_temp;
-
-/* Dcache line 8: IRQ work list, and keep trap_block a power-of-2 in size. */
- unsigned int irq_worklist;
- unsigned int __pad1;
- unsigned long __pad2[3];
-} __attribute__((aligned(64)));
-extern struct trap_per_cpu trap_block[NR_CPUS];
-extern void init_cur_cpu_trap(struct thread_info *);
-extern void setup_tba(void);
-
-struct cpuid_patch_entry {
- unsigned int addr;
- unsigned int cheetah_safari[4];
- unsigned int cheetah_jbus[4];
- unsigned int starfire[4];
- unsigned int sun4v[4];
-};
-extern struct cpuid_patch_entry __cpuid_patch, __cpuid_patch_end;
-
-struct sun4v_1insn_patch_entry {
- unsigned int addr;
- unsigned int insn;
-};
-extern struct sun4v_1insn_patch_entry __sun4v_1insn_patch,
- __sun4v_1insn_patch_end;
-
-struct sun4v_2insn_patch_entry {
- unsigned int addr;
- unsigned int insns[2];
-};
-extern struct sun4v_2insn_patch_entry __sun4v_2insn_patch,
- __sun4v_2insn_patch_end;
-
-#endif /* !(__ASSEMBLY__) */
-
-#define TRAP_PER_CPU_THREAD 0x00
-#define TRAP_PER_CPU_PGD_PADDR 0x08
-#define TRAP_PER_CPU_CPU_MONDO_PA 0x10
-#define TRAP_PER_CPU_DEV_MONDO_PA 0x18
-#define TRAP_PER_CPU_RESUM_MONDO_PA 0x20
-#define TRAP_PER_CPU_RESUM_KBUF_PA 0x28
-#define TRAP_PER_CPU_NONRESUM_MONDO_PA 0x30
-#define TRAP_PER_CPU_NONRESUM_KBUF_PA 0x38
-#define TRAP_PER_CPU_FAULT_INFO 0x40
-#define TRAP_PER_CPU_CPU_MONDO_BLOCK_PA 0xc0
-#define TRAP_PER_CPU_CPU_LIST_PA 0xc8
-#define TRAP_PER_CPU_TSB_HUGE 0xd0
-#define TRAP_PER_CPU_TSB_HUGE_TEMP 0xd8
-#define TRAP_PER_CPU_IRQ_WORKLIST 0xe0
-
-#define TRAP_BLOCK_SZ_SHIFT 8
-
-#include <asm/scratchpad.h>
-
-#define __GET_CPUID(REG) \
- /* Spitfire implementation (default). */ \
-661: ldxa [%g0] ASI_UPA_CONFIG, REG; \
- srlx REG, 17, REG; \
- and REG, 0x1f, REG; \
- nop; \
- .section .cpuid_patch, "ax"; \
- /* Instruction location. */ \
- .word 661b; \
- /* Cheetah Safari implementation. */ \
- ldxa [%g0] ASI_SAFARI_CONFIG, REG; \
- srlx REG, 17, REG; \
- and REG, 0x3ff, REG; \
- nop; \
- /* Cheetah JBUS implementation. */ \
- ldxa [%g0] ASI_JBUS_CONFIG, REG; \
- srlx REG, 17, REG; \
- and REG, 0x1f, REG; \
- nop; \
- /* Starfire implementation. */ \
- sethi %hi(0x1fff40000d0 >> 9), REG; \
- sllx REG, 9, REG; \
- or REG, 0xd0, REG; \
- lduwa [REG] ASI_PHYS_BYPASS_EC_E, REG;\
- /* sun4v implementation. */ \
- mov SCRATCHPAD_CPUID, REG; \
- ldxa [REG] ASI_SCRATCHPAD, REG; \
- nop; \
- nop; \
- .previous;
-
-#ifdef CONFIG_SMP
-
-#define TRAP_LOAD_TRAP_BLOCK(DEST, TMP) \
- __GET_CPUID(TMP) \
- sethi %hi(trap_block), DEST; \
- sllx TMP, TRAP_BLOCK_SZ_SHIFT, TMP; \
- or DEST, %lo(trap_block), DEST; \
- add DEST, TMP, DEST; \
-
-/* Clobbers TMP, current address space PGD phys address into DEST. */
-#define TRAP_LOAD_PGD_PHYS(DEST, TMP) \
- TRAP_LOAD_TRAP_BLOCK(DEST, TMP) \
- ldx [DEST + TRAP_PER_CPU_PGD_PADDR], DEST;
-
-/* Clobbers TMP, loads local processor's IRQ work area into DEST. */
-#define TRAP_LOAD_IRQ_WORK(DEST, TMP) \
- TRAP_LOAD_TRAP_BLOCK(DEST, TMP) \
- add DEST, TRAP_PER_CPU_IRQ_WORKLIST, DEST;
-
-/* Clobbers TMP, loads DEST with current thread info pointer. */
-#define TRAP_LOAD_THREAD_REG(DEST, TMP) \
- TRAP_LOAD_TRAP_BLOCK(DEST, TMP) \
- ldx [DEST + TRAP_PER_CPU_THREAD], DEST;
-
-/* Given the current thread info pointer in THR, load the per-cpu
- * area base of the current processor into DEST. REG1, REG2, and REG3 are
- * clobbered.
- *
- * You absolutely cannot use DEST as a temporary in this code. The
- * reason is that traps can happen during execution, and return from
- * trap will load the fully resolved DEST per-cpu base. This can corrupt
- * the calculations done by the macro mid-stream.
- */
-#define LOAD_PER_CPU_BASE(DEST, THR, REG1, REG2, REG3) \
- ldub [THR + TI_CPU], REG1; \
- sethi %hi(__per_cpu_shift), REG3; \
- sethi %hi(__per_cpu_base), REG2; \
- ldx [REG3 + %lo(__per_cpu_shift)], REG3; \
- ldx [REG2 + %lo(__per_cpu_base)], REG2; \
- sllx REG1, REG3, REG3; \
- add REG3, REG2, DEST;
-
-#else
-
-#define TRAP_LOAD_TRAP_BLOCK(DEST, TMP) \
- sethi %hi(trap_block), DEST; \
- or DEST, %lo(trap_block), DEST; \
-
-/* Uniprocessor versions, we know the cpuid is zero. */
-#define TRAP_LOAD_PGD_PHYS(DEST, TMP) \
- TRAP_LOAD_TRAP_BLOCK(DEST, TMP) \
- ldx [DEST + TRAP_PER_CPU_PGD_PADDR], DEST;
-
-/* Clobbers TMP, loads local processor's IRQ work area into DEST. */
-#define TRAP_LOAD_IRQ_WORK(DEST, TMP) \
- TRAP_LOAD_TRAP_BLOCK(DEST, TMP) \
- add DEST, TRAP_PER_CPU_IRQ_WORKLIST, DEST;
-
-#define TRAP_LOAD_THREAD_REG(DEST, TMP) \
- TRAP_LOAD_TRAP_BLOCK(DEST, TMP) \
- ldx [DEST + TRAP_PER_CPU_THREAD], DEST;
-
-/* No per-cpu areas on uniprocessor, so no need to load DEST. */
-#define LOAD_PER_CPU_BASE(DEST, THR, REG1, REG2, REG3)
-
-#endif /* !(CONFIG_SMP) */
-
#endif /* _SPARC64_CPUDATA_H */
git://git.onelab.eu / linux-2.6.git / blobdiff