/* cpudata.h: Per-cpu parameters.
*
- * Copyright (C) 2003 David S. Miller (davem@redhat.com)
+ * Copyright (C) 2003, 2005, 2006 David S. Miller (davem@davemloft.net)
*/
#ifndef _SPARC64_CPUDATA_H
#define _SPARC64_CPUDATA_H
+#include <asm/hypervisor.h>
+#include <asm/asi.h>
+
+#ifndef __ASSEMBLY__
+
#include <linux/percpu.h>
+#include <linux/threads.h>
typedef struct {
/* Dcache line 1 */
- unsigned int __pad0; /* bh_count moved to irq_stat for consistency. KAO */
+ unsigned int __softirq_pending; /* must be 1st, see rtrap.S */
unsigned int multiplier;
unsigned int counter;
- unsigned int idle_volume;
+ unsigned int __pad1;
unsigned long clock_tick; /* %tick's per second */
unsigned long udelay_val;
- /* Dcache line 2 */
- unsigned int pgcache_size;
- unsigned int __pad1;
- unsigned long *pte_cache[2];
- unsigned long *pgd_cache;
+ /* Dcache line 2, rarely used */
+ unsigned int dcache_size;
+ unsigned int dcache_line_size;
+ unsigned int icache_size;
+ unsigned int icache_line_size;
+ unsigned int ecache_size;
+ unsigned int ecache_line_size;
+ unsigned int __pad3;
+ unsigned int __pad4;
} cpuinfo_sparc;
DECLARE_PER_CPU(cpuinfo_sparc, __cpu_data);
#define cpu_data(__cpu) per_cpu(__cpu_data, (__cpu))
#define local_cpu_data() __get_cpu_var(__cpu_data)
+/* Trap handling code needs to get at a few critical values upon
+ * trap entry and to process TSB misses. These cannot be in the
+ * per_cpu() area as we really need to lock them into the TLB and
+ * thus make them part of the main kernel image. As a result we
+ * try to make this as small as possible.
+ *
+ * This is padded out and aligned to 64-bytes to avoid false sharing
+ * on SMP.
+ */
+
+/* If you modify the size of this structure, please update
+ * TRAP_BLOCK_SZ_SHIFT below.
+ */
+struct thread_info;
+struct trap_per_cpu {
+/* D-cache line 1: Basic thread information, cpu and device mondo queues */
+ struct thread_info *thread;
+ unsigned long pgd_paddr;
+ unsigned long cpu_mondo_pa;
+ unsigned long dev_mondo_pa;
+
+/* D-cache line 2: Error Mondo Queue and kernel buffer pointers */
+ unsigned long resum_mondo_pa;
+ unsigned long resum_kernel_buf_pa;
+ unsigned long nonresum_mondo_pa;
+ unsigned long nonresum_kernel_buf_pa;
+
+/* Dcache lines 3, 4, 5, and 6: Hypervisor Fault Status */
+ struct hv_fault_status fault_info;
+
+/* Dcache line 7: Physical addresses of CPU send mondo block and CPU list. */
+ unsigned long cpu_mondo_block_pa;
+ unsigned long cpu_list_pa;
+ unsigned long tsb_huge;
+ unsigned long tsb_huge_temp;
+
+/* Dcache line 8: Unused, needed to keep trap_block a power-of-2 in size. */
+ unsigned long __pad2[4];
+} __attribute__((aligned(64)));
+extern struct trap_per_cpu trap_block[NR_CPUS];
+extern void init_cur_cpu_trap(struct thread_info *);
+extern void setup_tba(void);
+
+struct cpuid_patch_entry {
+ unsigned int addr;
+ unsigned int cheetah_safari[4];
+ unsigned int cheetah_jbus[4];
+ unsigned int starfire[4];
+ unsigned int sun4v[4];
+};
+extern struct cpuid_patch_entry __cpuid_patch, __cpuid_patch_end;
+
+struct sun4v_1insn_patch_entry {
+ unsigned int addr;
+ unsigned int insn;
+};
+extern struct sun4v_1insn_patch_entry __sun4v_1insn_patch,
+ __sun4v_1insn_patch_end;
+
+struct sun4v_2insn_patch_entry {
+ unsigned int addr;
+ unsigned int insns[2];
+};
+extern struct sun4v_2insn_patch_entry __sun4v_2insn_patch,
+ __sun4v_2insn_patch_end;
+
+#endif /* !(__ASSEMBLY__) */
+
+#define TRAP_PER_CPU_THREAD 0x00
+#define TRAP_PER_CPU_PGD_PADDR 0x08
+#define TRAP_PER_CPU_CPU_MONDO_PA 0x10
+#define TRAP_PER_CPU_DEV_MONDO_PA 0x18
+#define TRAP_PER_CPU_RESUM_MONDO_PA 0x20
+#define TRAP_PER_CPU_RESUM_KBUF_PA 0x28
+#define TRAP_PER_CPU_NONRESUM_MONDO_PA 0x30
+#define TRAP_PER_CPU_NONRESUM_KBUF_PA 0x38
+#define TRAP_PER_CPU_FAULT_INFO 0x40
+#define TRAP_PER_CPU_CPU_MONDO_BLOCK_PA 0xc0
+#define TRAP_PER_CPU_CPU_LIST_PA 0xc8
+#define TRAP_PER_CPU_TSB_HUGE 0xd0
+#define TRAP_PER_CPU_TSB_HUGE_TEMP 0xd8
+
+#define TRAP_BLOCK_SZ_SHIFT 8
+
+#include <asm/scratchpad.h>
+
+#define __GET_CPUID(REG) \
+ /* Spitfire implementation (default). */ \
+661: ldxa [%g0] ASI_UPA_CONFIG, REG; \
+ srlx REG, 17, REG; \
+ and REG, 0x1f, REG; \
+ nop; \
+ .section .cpuid_patch, "ax"; \
+ /* Instruction location. */ \
+ .word 661b; \
+ /* Cheetah Safari implementation. */ \
+ ldxa [%g0] ASI_SAFARI_CONFIG, REG; \
+ srlx REG, 17, REG; \
+ and REG, 0x3ff, REG; \
+ nop; \
+ /* Cheetah JBUS implementation. */ \
+ ldxa [%g0] ASI_JBUS_CONFIG, REG; \
+ srlx REG, 17, REG; \
+ and REG, 0x1f, REG; \
+ nop; \
+ /* Starfire implementation. */ \
+ sethi %hi(0x1fff40000d0 >> 9), REG; \
+ sllx REG, 9, REG; \
+ or REG, 0xd0, REG; \
+ lduwa [REG] ASI_PHYS_BYPASS_EC_E, REG;\
+ /* sun4v implementation. */ \
+ mov SCRATCHPAD_CPUID, REG; \
+ ldxa [REG] ASI_SCRATCHPAD, REG; \
+ nop; \
+ nop; \
+ .previous;
+
+#ifdef CONFIG_SMP
+
+#define TRAP_LOAD_TRAP_BLOCK(DEST, TMP) \
+ __GET_CPUID(TMP) \
+ sethi %hi(trap_block), DEST; \
+ sllx TMP, TRAP_BLOCK_SZ_SHIFT, TMP; \
+ or DEST, %lo(trap_block), DEST; \
+ add DEST, TMP, DEST; \
+
+/* Clobbers TMP, current address space PGD phys address into DEST. */
+#define TRAP_LOAD_PGD_PHYS(DEST, TMP) \
+ TRAP_LOAD_TRAP_BLOCK(DEST, TMP) \
+ ldx [DEST + TRAP_PER_CPU_PGD_PADDR], DEST;
+
+/* Clobbers TMP, loads local processor's IRQ work area into DEST. */
+#define TRAP_LOAD_IRQ_WORK(DEST, TMP) \
+ __GET_CPUID(TMP) \
+ sethi %hi(__irq_work), DEST; \
+ sllx TMP, 6, TMP; \
+ or DEST, %lo(__irq_work), DEST; \
+ add DEST, TMP, DEST;
+
+/* Clobbers TMP, loads DEST with current thread info pointer. */
+#define TRAP_LOAD_THREAD_REG(DEST, TMP) \
+ TRAP_LOAD_TRAP_BLOCK(DEST, TMP) \
+ ldx [DEST + TRAP_PER_CPU_THREAD], DEST;
+
+/* Given the current thread info pointer in THR, load the per-cpu
+ * area base of the current processor into DEST. REG1, REG2, and REG3 are
+ * clobbered.
+ *
+ * You absolutely cannot use DEST as a temporary in this code. The
+ * reason is that traps can happen during execution, and return from
+ * trap will load the fully resolved DEST per-cpu base. This can corrupt
+ * the calculations done by the macro mid-stream.
+ */
+#define LOAD_PER_CPU_BASE(DEST, THR, REG1, REG2, REG3) \
+ ldub [THR + TI_CPU], REG1; \
+ sethi %hi(__per_cpu_shift), REG3; \
+ sethi %hi(__per_cpu_base), REG2; \
+ ldx [REG3 + %lo(__per_cpu_shift)], REG3; \
+ ldx [REG2 + %lo(__per_cpu_base)], REG2; \
+ sllx REG1, REG3, REG3; \
+ add REG3, REG2, DEST;
+
+#else
+
+#define TRAP_LOAD_TRAP_BLOCK(DEST, TMP) \
+ sethi %hi(trap_block), DEST; \
+ or DEST, %lo(trap_block), DEST; \
+
+/* Uniprocessor versions, we know the cpuid is zero. */
+#define TRAP_LOAD_PGD_PHYS(DEST, TMP) \
+ TRAP_LOAD_TRAP_BLOCK(DEST, TMP) \
+ ldx [DEST + TRAP_PER_CPU_PGD_PADDR], DEST;
+
+#define TRAP_LOAD_IRQ_WORK(DEST, TMP) \
+ sethi %hi(__irq_work), DEST; \
+ or DEST, %lo(__irq_work), DEST;
+
+#define TRAP_LOAD_THREAD_REG(DEST, TMP) \
+ TRAP_LOAD_TRAP_BLOCK(DEST, TMP) \
+ ldx [DEST + TRAP_PER_CPU_THREAD], DEST;
+
+/* No per-cpu areas on uniprocessor, so no need to load DEST. */
+#define LOAD_PER_CPU_BASE(DEST, THR, REG1, REG2, REG3)
+
+#endif /* !(CONFIG_SMP) */
+
#endif /* _SPARC64_CPUDATA_H */
git://git.onelab.eu / linux-2.6.git / blobdiff