* Devices may also have class-specific or vendor-specific descriptors.
*/
-/* host-side wrapper for parsed endpoint descriptors */
+/**
+ * struct usb_host_endpoint - host-side endpoint descriptor and queue
+ * @desc: descriptor for this endpoint, wMaxPacketSize in native byteorder
+ * @urb_list: urbs queued to this endpoint; maintained by usbcore
+ * @hcpriv: for use by HCD; typically holds hardware dma queue head (QH)
+ * with one or more transfer descriptors (TDs) per urb
+ * @extra: descriptors following this endpoint in the configuration
+ * @extralen: how many bytes of "extra" are valid
+ *
+ * USB requests are always queued to a given endpoint, identified by a
+ * descriptor within an active interface in a given USB configuration.
+ */
struct usb_host_endpoint {
struct usb_endpoint_descriptor desc;
+ struct list_head urb_list;
+ void *hcpriv;
unsigned char *extra; /* Extra descriptors */
int extralen;
*/
struct usb_host_endpoint *endpoint;
+ char *string; /* iInterface string, if present */
unsigned char *extra; /* Extra descriptors */
int extralen;
};
+enum usb_interface_condition {
+ USB_INTERFACE_UNBOUND = 0,
+ USB_INTERFACE_BINDING,
+ USB_INTERFACE_BOUND,
+ USB_INTERFACE_UNBINDING,
+};
+
/**
* struct usb_interface - what usb device drivers talk to
* @altsetting: array of interface structures, one for each alternate
* be unused. The driver should set this value in the probe()
* function of the driver, after it has been assigned a minor
* number from the USB core by calling usb_register_dev().
+ * @condition: binding state of the interface: not bound, binding
+ * (in probe()), bound to a driver, or unbinding (in disconnect())
* @dev: driver model's view of this device
* @class_dev: driver model's class view of this device.
*
unsigned num_altsetting; /* number of alternate settings */
int minor; /* minor number this interface is bound to */
+ enum usb_interface_condition condition; /* state of binding */
struct device dev; /* interface specific device info */
struct class_device *class_dev;
};
/**
* struct usb_host_config - representation of a device's configuration
* @desc: the device's configuration descriptor.
+ * @string: pointer to the cached version of the iConfiguration string, if
+ * present for this configuration.
* @interface: array of pointers to usb_interface structures, one for each
* interface in the configuration. The number of interfaces is stored
* in desc.bNumInterfaces. These pointers are valid only while the
struct usb_host_config {
struct usb_config_descriptor desc;
+ char *string;
/* the interfaces associated with this configuration,
* stored in no particular order */
struct usb_interface *interface[USB_MAXINTERFACES];
int extralen;
};
-// FIXME remove; exported only for drivers/usb/misc/auserwald.c
-// prefer usb_device->epnum[0..31]
-extern struct usb_endpoint_descriptor *
- usb_epnum_to_ep_desc(struct usb_device *dev, unsigned epnum);
-
int __usb_get_extra_descriptor(char *buffer, unsigned size,
unsigned char type, void **ptr);
#define usb_get_extra_descriptor(ifpoint,type,ptr)\
int bandwidth_isoc_reqs; /* number of Isoc. requests */
struct dentry *usbfs_dentry; /* usbfs dentry entry for the bus */
- struct dentry *usbdevfs_dentry; /* usbdevfs dentry entry for the bus */
struct class_device class_dev; /* class device for this bus */
void (*release)(struct usb_bus *bus); /* function to destroy this bus's memory */
+#if defined(CONFIG_USB_MON) || defined(CONFIG_USB_MON_MODULE)
+ struct mon_bus *mon_bus; /* non-null when associated */
+ int monitored; /* non-zero when monitored */
+#endif
};
#define to_usb_bus(d) container_of(d, struct usb_bus, class_dev)
struct usb_tt;
+/*
+ * struct usb_device - kernel's representation of a USB device
+ *
+ * FIXME: Write the kerneldoc!
+ *
+ * Usbcore drivers should not set usbdev->state directly. Instead use
+ * usb_set_device_state().
+ */
struct usb_device {
int devnum; /* Address on USB bus */
char devpath [16]; /* Use in messages: /port/port/... */
struct semaphore serialize;
unsigned int toggle[2]; /* one bit for each endpoint ([0] = IN, [1] = OUT) */
- int epmaxpacketin[16]; /* INput endpoint specific maximums */
- int epmaxpacketout[16]; /* OUTput endpoint specific maximums */
struct usb_device *parent; /* our hub, unless we're the root */
struct usb_bus *bus; /* Bus we're part of */
+ struct usb_host_endpoint ep0;
struct device dev; /* Generic device interface */
struct usb_device_descriptor descriptor;/* Descriptor */
struct usb_host_config *config; /* All of the configs */
+
struct usb_host_config *actconfig;/* the active configuration */
+ struct usb_host_endpoint *ep_in[16];
+ struct usb_host_endpoint *ep_out[16];
char **rawdescriptors; /* Raw descriptors for each config */
int have_langid; /* whether string_langid is valid yet */
int string_langid; /* language ID for strings */
- void *hcpriv; /* Host Controller private data */
-
+ char *product;
+ char *manufacturer;
+ char *serial; /* static strings from the device */
struct list_head filelist;
struct dentry *usbfs_dentry; /* usbfs dentry entry for the device */
- struct dentry *usbdevfs_dentry; /* usbdevfs dentry entry for the device */
/*
* Child devices - these can be either new devices
extern struct usb_device *usb_get_dev(struct usb_device *dev);
extern void usb_put_dev(struct usb_device *dev);
-/* mostly for devices emulating SCSI over USB */
+extern void usb_lock_device(struct usb_device *udev);
+extern int usb_trylock_device(struct usb_device *udev);
+extern int usb_lock_device_for_reset(struct usb_device *udev,
+ struct usb_interface *iface);
+extern void usb_unlock_device(struct usb_device *udev);
+
+/* USB port reset for device reinitialization */
extern int usb_reset_device(struct usb_device *dev);
-extern int __usb_reset_device(struct usb_device *dev);
extern struct usb_device *usb_find_device(u16 vendor_id, u16 product_id);
+/*-------------------------------------------------------------------------*/
+
/* for drivers using iso endpoints */
extern int usb_get_current_frame_number (struct usb_device *usb_dev);
int (*ioctl) (struct usb_interface *intf, unsigned int code, void *buf);
- int (*suspend) (struct usb_interface *intf, u32 state);
+ int (*suspend) (struct usb_interface *intf, pm_message_t message);
int (*resume) (struct usb_interface *intf);
const struct usb_device_id *id_table;
* to poll for transfers. After the URB has been submitted, the interval
* field reflects how the transfer was actually scheduled.
* The polling interval may be more frequent than requested.
- * For example, some controllers have a maximum interval of 32 microseconds,
- * while others support intervals of up to 1024 microseconds.
+ * For example, some controllers have a maximum interval of 32 milliseconds,
+ * while others support intervals of up to 1024 milliseconds.
* Isochronous URBs also have transfer intervals. (Note that for isochronous
* endpoints, as well as high speed interrupt endpoints, the encoding of
* the transfer interval in the endpoint descriptor is logarithmic.
* of the iso_frame_desc array, and the number of errors is reported in
* error_count. Completion callbacks for ISO transfers will normally
* (re)submit URBs to ensure a constant transfer rate.
+ *
+ * Note that even fields marked "public" should not be touched by the driver
+ * when the urb is owned by the hcd, that is, since the call to
+ * usb_submit_urb() till the entry into the completion routine.
*/
struct urb
{
struct kref kref; /* reference count of the URB */
spinlock_t lock; /* lock for the URB */
void *hcpriv; /* private data for host controller */
- struct list_head urb_list; /* list pointer to all active urbs */
int bandwidth; /* bandwidth for INT/ISO request */
atomic_t use_count; /* concurrent submissions counter */
u8 reject; /* submissions will fail */
/* public, documented fields in the urb that can be used by drivers */
+ struct list_head urb_list; /* list head for use by the urb owner */
struct usb_device *dev; /* (in) pointer to associated device */
unsigned int pipe; /* (in) pipe information */
int status; /* (return) non-ISO status */
void usb_buffer_free (struct usb_device *dev, size_t size,
void *addr, dma_addr_t dma);
-struct urb *usb_buffer_map (struct urb *urb);
#if 0
+struct urb *usb_buffer_map (struct urb *urb);
void usb_buffer_dmasync (struct urb *urb);
-#endif
void usb_buffer_unmap (struct urb *urb);
+#endif
struct scatterlist;
int usb_buffer_map_sg (struct usb_device *dev, unsigned pipe,
int timeout);
/* selective suspend/resume */
-extern int usb_suspend_device(struct usb_device *dev, u32 state);
+extern int usb_suspend_device(struct usb_device *dev, pm_message_t message);
extern int usb_resume_device(struct usb_device *dev);
extern int usb_set_interface(struct usb_device *dev, int ifnum, int alternate);
/*
- * timeouts, in seconds, used for sending/receiving control messages
+ * timeouts, in milliseconds, used for sending/receiving control messages
* they typically complete within a few frames (msec) after they're issued
* USB identifies 5 second timeouts, maybe more in a few cases, and a few
* slow devices (like some MGE Ellipse UPSes) actually push that limit.
*/
-#define USB_CTRL_GET_TIMEOUT 5
-#define USB_CTRL_SET_TIMEOUT 5
+#define USB_CTRL_GET_TIMEOUT 5000
+#define USB_CTRL_SET_TIMEOUT 5000
/**
/* -------------------------------------------------------------------------- */
/*
- * Calling this entity a "pipe" is glorifying it. A USB pipe
- * is something embarrassingly simple: it basically consists
- * of the following information:
- * - device number (7 bits)
- * - endpoint number (4 bits)
- * - current Data0/1 state (1 bit) [Historical; now gone]
- * - direction (1 bit)
- * - speed (1 bit) [Historical and specific to USB 1.1; now gone.]
- * - max packet size (2 bits: 8, 16, 32 or 64) [Historical; now gone.]
- * - pipe type (2 bits: control, interrupt, bulk, isochronous)
- *
- * That's 18 bits. Really. Nothing more. And the USB people have
- * documented these eighteen bits as some kind of glorious
- * virtual data structure.
+ * For various legacy reasons, Linux has a small cookie that's paired with
+ * a struct usb_device to identify an endpoint queue. Queue characteristics
+ * are defined by the endpoint's descriptor. This cookie is called a "pipe",
+ * an unsigned int encoded as:
*
- * Let's not fall in that trap. We'll just encode it as a simple
- * unsigned int. The encoding is:
- *
- * - max size: bits 0-1 [Historical; now gone.]
* - direction: bit 7 (0 = Host-to-Device [Out],
* 1 = Device-to-Host [In] ...
* like endpoint bEndpointAddress)
- * - device: bits 8-14 ... bit positions known to uhci-hcd
+ * - device address: bits 8-14 ... bit positions known to uhci-hcd
* - endpoint: bits 15-18 ... bit positions known to uhci-hcd
- * - Data0/1: bit 19 [Historical; now gone. ]
- * - lowspeed: bit 26 [Historical; now gone. ]
* - pipe type: bits 30-31 (00 = isochronous, 01 = interrupt,
* 10 = control, 11 = bulk)
*
- * Why? Because it's arbitrary, and whatever encoding we select is really
- * up to us. This one happens to share a lot of bit positions with the UHCI
- * specification, so that much of the uhci driver can just mask the bits
- * appropriately.
+ * Given the device address and endpoint descriptor, pipes are redundant.
*/
/* NOTE: these are not the standard USB_ENDPOINT_XFER_* values!! */
+/* (yet ... they're the values used by usbfs) */
#define PIPE_ISOCHRONOUS 0
#define PIPE_INTERRUPT 1
#define PIPE_CONTROL 2
#define PIPE_BULK 3
-#define usb_maxpacket(dev, pipe, out) (out \
- ? (dev)->epmaxpacketout[usb_pipeendpoint(pipe)] \
- : (dev)->epmaxpacketin [usb_pipeendpoint(pipe)] )
-
#define usb_pipein(pipe) ((pipe) & USB_DIR_IN)
#define usb_pipeout(pipe) (!usb_pipein(pipe))
+
#define usb_pipedevice(pipe) (((pipe) >> 8) & 0x7f)
#define usb_pipeendpoint(pipe) (((pipe) >> 15) & 0xf)
+
#define usb_pipetype(pipe) (((pipe) >> 30) & 3)
#define usb_pipeisoc(pipe) (usb_pipetype((pipe)) == PIPE_ISOCHRONOUS)
#define usb_pipeint(pipe) (usb_pipetype((pipe)) == PIPE_INTERRUPT)
#define usb_sndintpipe(dev,endpoint) ((PIPE_INTERRUPT << 30) | __create_pipe(dev,endpoint))
#define usb_rcvintpipe(dev,endpoint) ((PIPE_INTERRUPT << 30) | __create_pipe(dev,endpoint) | USB_DIR_IN)
+/*-------------------------------------------------------------------------*/
+
+static inline __u16
+usb_maxpacket(struct usb_device *udev, int pipe, int is_out)
+{
+ struct usb_host_endpoint *ep;
+ unsigned epnum = usb_pipeendpoint(pipe);
+
+ if (is_out) {
+ WARN_ON(usb_pipein(pipe));
+ ep = udev->ep_out[epnum];
+ } else {
+ WARN_ON(usb_pipeout(pipe));
+ ep = udev->ep_in[epnum];
+ }
+ if (!ep)
+ return 0;
+
+ /* NOTE: only 0x07ff bits are for packet size... */
+ return le16_to_cpu(ep->desc.wMaxPacketSize);
+}
+
/* -------------------------------------------------------------------------- */
#ifdef DEBUG
git://git.onelab.eu / linux-2.6.git / blobdiff