fedora core 6 1.2949 + vserver 2.2.0

[linux-2.6.git] / include / media / tuner-types.h

diff --git a/include/media/tuner-types.h b/include/media/tuner-types.h
index 15821ab..e5ad3fc 100644 (file)
--- a/include/media/tuner-types.h
+++ b/include/media/tuner-types.h
@@ -14,11 +14,13 @@ enum param_type {
 
 struct tuner_range {
        unsigned short limit;
+       unsigned char config;
        unsigned char cb;
 };
 
 struct tuner_params {
        enum param_type type;
+
        /* Many Philips based tuners have a comment like this in their
         * datasheet:
         *
@@ -38,7 +40,67 @@ struct tuner_params {
         * static unless the control byte was sent first.
         */
        unsigned int cb_first_if_lower_freq:1;
-       unsigned char config; /* to be moved into struct tuner_range for dvb-pll merge */
+       /* Set to 1 if this tuner uses a tda9887 */
+       unsigned int has_tda9887:1;
+       /* Many Philips tuners use tda9887 PORT1 to select the FM radio
+          sensitivity. If this setting is 1, then set PORT1 to 1 to
+          get proper FM reception. */
+       unsigned int port1_fm_high_sensitivity:1;
+       /* Some Philips tuners use tda9887 PORT2 to select the FM radio
+          sensitivity. If this setting is 1, then set PORT2 to 1 to
+          get proper FM reception. */
+       unsigned int port2_fm_high_sensitivity:1;
+       /* Some Philips tuners use tda9887 cGainNormal to select the FM radio
+          sensitivity. If this setting is 1, e register will use cGainNormal
+          instead of cGainLow. */
+       unsigned int fm_gain_normal:1;
+       /* Most tuners with a tda9887 use QSS mode. Some (cheaper) tuners
+          use Intercarrier mode. If this setting is 1, then the tuner
+          needs to be set to intercarrier mode. */
+       unsigned int intercarrier_mode:1;
+       /* This setting sets the default value for PORT1.
+          0 means inactive, 1 means active. Note: the actual bit
+          value written to the tda9887 is inverted. So a 0 here
+          means a 1 in the B6 bit. */
+       unsigned int port1_active:1;
+       /* This setting sets the default value for PORT2.
+          0 means inactive, 1 means active. Note: the actual bit
+          value written to the tda9887 is inverted. So a 0 here
+          means a 1 in the B7 bit. */
+       unsigned int port2_active:1;
+       /* Sometimes PORT1 is inverted when the SECAM-L' standard is selected.
+          Set this bit to 1 if this is needed. */
+       unsigned int port1_invert_for_secam_lc:1;
+       /* Sometimes PORT2 is inverted when the SECAM-L' standard is selected.
+          Set this bit to 1 if this is needed. */
+       unsigned int port2_invert_for_secam_lc:1;
+       /* Some cards require PORT1 to be 1 for mono Radio FM and 0 for stereo. */
+       unsigned int port1_set_for_fm_mono:1;
+       /* Select 18% (or according to datasheet 0%) L standard PLL gating,
+          vs the driver default of 36%. */
+       unsigned int default_pll_gating_18:1;
+       /* Default tda9887 TOP value in dB for the low band. Default is 0.
+          Range: -16:+15 */
+       signed int default_top_low:5;
+       /* Default tda9887 TOP value in dB for the mid band. Default is 0.
+          Range: -16:+15 */
+       signed int default_top_mid:5;
+       /* Default tda9887 TOP value in dB for the high band. Default is 0.
+          Range: -16:+15 */
+       signed int default_top_high:5;
+       /* Default tda9887 TOP value in dB for SECAM-L/L' for the low band.
+          Default is 0. Several tuners require a different TOP value for
+          the SECAM-L/L' standards. Range: -16:+15 */
+       signed int default_top_secam_low:5;
+       /* Default tda9887 TOP value in dB for SECAM-L/L' for the mid band.
+          Default is 0. Several tuners require a different TOP value for
+          the SECAM-L/L' standards. Range: -16:+15 */
+       signed int default_top_secam_mid:5;
+       /* Default tda9887 TOP value in dB for SECAM-L/L' for the high band.
+          Default is 0. Several tuners require a different TOP value for
+          the SECAM-L/L' standards. Range: -16:+15 */
+       signed int default_top_secam_high:5;
+
 
        unsigned int count;
        struct tuner_range *ranges;
@@ -46,6 +108,7 @@ struct tuner_params {
 
 struct tunertype {
        char *name;
+       unsigned int count;
        struct tuner_params *params;
 };