#include <linux/bitops.h>
#include <linux/device.h>
+#include <linux/workqueue.h>
#include "pcm.h"
#include "control.h"
#include "info.h"
#define AC97_GP_DRSS_1011 0x0000 /* LR(C) 10+11(+12) */
#define AC97_GP_DRSS_78 0x0400 /* LR 7+8 */
+/* powerdown bits */
+#define AC97_PD_ADC_STATUS 0x0001 /* ADC status (RO) */
+#define AC97_PD_DAC_STATUS 0x0002 /* DAC status (RO) */
+#define AC97_PD_MIXER_STATUS 0x0004 /* Analog mixer status (RO) */
+#define AC97_PD_VREF_STATUS 0x0008 /* Vref status (RO) */
+#define AC97_PD_PR0 0x0100 /* Power down PCM ADCs and input MUX */
+#define AC97_PD_PR1 0x0200 /* Power down PCM front DAC */
+#define AC97_PD_PR2 0x0400 /* Power down Mixer (Vref still on) */
+#define AC97_PD_PR3 0x0800 /* Power down Mixer (Vref off) */
+#define AC97_PD_PR4 0x1000 /* Power down AC-Link */
+#define AC97_PD_PR5 0x2000 /* Disable internal clock usage */
+#define AC97_PD_PR6 0x4000 /* Headphone amplifier */
+#define AC97_PD_EAPD 0x8000 /* External Amplifer Power Down (EAPD) */
+
/* extended audio ID bit defines */
#define AC97_EI_VRA 0x0001 /* Variable bit rate supported */
#define AC97_EI_DRA 0x0002 /* Double rate supported */
/* specific - Analog Devices */
#define AC97_AD_TEST 0x5a /* test register */
+#define AC97_AD_TEST2 0x5c /* undocumented test register 2 */
#define AC97_AD_CODEC_CFG 0x70 /* codec configuration */
#define AC97_AD_JACK_SPDIF 0x72 /* Jack Sense & S/PDIF */
#define AC97_AD_SERIAL_CFG 0x74 /* Serial Configuration */
#define AC97_SCAP_INV_EAPD (1<<7) /* inverted EAPD */
#define AC97_SCAP_DETECT_BY_VENDOR (1<<8) /* use vendor registers for read tests */
#define AC97_SCAP_NO_SPDIF (1<<9) /* don't build SPDIF controls */
+#define AC97_SCAP_EAPD_LED (1<<10) /* EAPD as mute LED */
/* ac97->flags */
#define AC97_HAS_PC_BEEP (1<<0) /* force PC Speaker usage */
#define AC97_HAS_NO_MIC (1<<15) /* no MIC volume */
#define AC97_HAS_NO_TONE (1<<16) /* no Tone volume */
#define AC97_HAS_NO_STD_PCM (1<<17) /* no standard AC97 PCM volume and mute */
+#define AC97_HAS_NO_AUX (1<<18) /* no standard AC97 AUX volume and mute */
/* rates indexes */
#define AC97_RATES_FRONT_DAC 0
struct snd_info_entry *proc;
};
+/* static resolution table */
+struct snd_ac97_res_table {
+ unsigned short reg; /* register */
+ unsigned short bits; /* resolution bitmask */
+};
+
struct snd_ac97_template {
void *private_data;
void (*private_free) (struct snd_ac97 *ac97);
unsigned short num; /* number of codec: 0 = primary, 1 = secondary */
unsigned short addr; /* physical address of codec [0-3] */
unsigned int scaps; /* driver capabilities */
- unsigned int limited_regs; /* allow limited registers only */
- DECLARE_BITMAP(reg_accessed, 0x80); /* bit flags */
+ const struct snd_ac97_res_table *res_table; /* static resolution */
};
struct snd_ac97 {
struct snd_info_entry *proc_regs;
unsigned short subsystem_vendor;
unsigned short subsystem_device;
- struct semaphore reg_mutex;
- struct semaphore page_mutex; /* mutex for AD18xx multi-codecs and paging (2.3) */
+ struct mutex reg_mutex;
+ struct mutex page_mutex; /* mutex for AD18xx multi-codecs and paging (2.3) */
unsigned short num; /* number of codec: 0 = primary, 1 = secondary */
unsigned short addr; /* physical address of codec [0-3] */
unsigned int id; /* identification of codec */
unsigned short caps; /* capabilities (register 0) */
unsigned short ext_id; /* extended feature identification (register 28) */
unsigned short ext_mid; /* extended modem ID (register 3C) */
+ const struct snd_ac97_res_table *res_table; /* static resolution */
unsigned int scaps; /* driver capabilities */
unsigned int flags; /* specific code */
unsigned int rates[6]; /* see AC97_RATES_* defines */
unsigned int spdif_status;
unsigned short regs[0x80]; /* register cache */
- unsigned int limited_regs; /* allow limited registers only */
DECLARE_BITMAP(reg_accessed, 0x80); /* bit flags */
union { /* vendor specific code */
struct {
/* jack-sharing info */
unsigned char indep_surround;
unsigned char channel_mode;
+
+#ifdef CONFIG_SND_AC97_POWER_SAVE
+ unsigned int power_up; /* power states */
+ struct workqueue_struct *power_workq;
+ struct delayed_work power_work;
+#endif
struct device dev;
};
void snd_ac97_write_cache(struct snd_ac97 *ac97, unsigned short reg, unsigned short value);
int snd_ac97_update(struct snd_ac97 *ac97, unsigned short reg, unsigned short value);
int snd_ac97_update_bits(struct snd_ac97 *ac97, unsigned short reg, unsigned short mask, unsigned short value);
+#ifdef CONFIG_SND_AC97_POWER_SAVE
+int snd_ac97_update_power(struct snd_ac97 *ac97, int reg, int powerup);
+#else
+static inline int snd_ac97_update_power(struct snd_ac97 *ac97, int reg,
+ int powerup)
+{
+ return 0;
+}
+#endif
#ifdef CONFIG_PM
void snd_ac97_suspend(struct snd_ac97 *ac97);
void snd_ac97_resume(struct snd_ac97 *ac97);
copy_flag: 1, /* lowlevel driver must fill all entries */
spdif: 1; /* spdif pcm */
unsigned short aslots; /* active slots */
+ unsigned short cur_dbl; /* current double-rate state */
unsigned int rates; /* available rates */
struct {
unsigned short slots; /* driver input: requested AC97 slot numbers */
git://git.onelab.eu / linux-2.6.git / blobdiff