fedora core 6 1.2949 + vserver 2.2.0
[linux-2.6.git] / kernel / time.c
index 8045391..7e09cfe 100644 (file)
@@ -61,7 +61,7 @@ asmlinkage long sys_time(time_t __user * tloc)
        time_t i;
        struct timeval tv;
 
-       do_gettimeofday(&tv);
+       vx_gettimeofday(&tv);
        i = tv.tv_sec;
 
        if (tloc) {
@@ -92,7 +92,7 @@ asmlinkage long sys_stime(time_t __user *tptr)
        if (err)
                return err;
 
-       do_settimeofday(&tv);
+       vx_settimeofday(&tv);
        return 0;
 }
 
@@ -102,7 +102,7 @@ asmlinkage long sys_gettimeofday(struct timeval __user *tv, struct timezone __us
 {
        if (likely(tv != NULL)) {
                struct timeval ktv;
-               do_gettimeofday(&ktv);
+               vx_gettimeofday(&ktv);
                if (copy_to_user(tv, &ktv, sizeof(ktv)))
                        return -EFAULT;
        }
@@ -176,7 +176,7 @@ int do_sys_settimeofday(struct timespec *tv, struct timezone *tz)
                /* SMP safe, again the code in arch/foo/time.c should
                 * globally block out interrupts when it runs.
                 */
-               return do_settimeofday(tv);
+               return vx_settimeofday(tv);
        }
        return 0;
 }
@@ -202,206 +202,6 @@ asmlinkage long sys_settimeofday(struct timeval __user *tv,
        return do_sys_settimeofday(tv ? &new_ts : NULL, tz ? &new_tz : NULL);
 }
 
-long pps_offset;               /* pps time offset (us) */
-long pps_jitter = MAXTIME;     /* time dispersion (jitter) (us) */
-
-long pps_freq;                 /* frequency offset (scaled ppm) */
-long pps_stabil = MAXFREQ;     /* frequency dispersion (scaled ppm) */
-
-long pps_valid = PPS_VALID;    /* pps signal watchdog counter */
-
-int pps_shift = PPS_SHIFT;     /* interval duration (s) (shift) */
-
-long pps_jitcnt;               /* jitter limit exceeded */
-long pps_calcnt;               /* calibration intervals */
-long pps_errcnt;               /* calibration errors */
-long pps_stbcnt;               /* stability limit exceeded */
-
-/* hook for a loadable hardpps kernel module */
-void (*hardpps_ptr)(struct timeval *);
-
-/* we call this to notify the arch when the clock is being
- * controlled.  If no such arch routine, do nothing.
- */
-void __attribute__ ((weak)) notify_arch_cmos_timer(void)
-{
-       return;
-}
-
-/* adjtimex mainly allows reading (and writing, if superuser) of
- * kernel time-keeping variables. used by xntpd.
- */
-int do_adjtimex(struct timex *txc)
-{
-        long ltemp, mtemp, save_adjust;
-       int result;
-
-       /* In order to modify anything, you gotta be super-user! */
-       if (txc->modes && !capable(CAP_SYS_TIME))
-               return -EPERM;
-               
-       /* Now we validate the data before disabling interrupts */
-
-       if ((txc->modes & ADJ_OFFSET_SINGLESHOT) == ADJ_OFFSET_SINGLESHOT)
-         /* singleshot must not be used with any other mode bits */
-               if (txc->modes != ADJ_OFFSET_SINGLESHOT)
-                       return -EINVAL;
-
-       if (txc->modes != ADJ_OFFSET_SINGLESHOT && (txc->modes & ADJ_OFFSET))
-         /* adjustment Offset limited to +- .512 seconds */
-               if (txc->offset <= - MAXPHASE || txc->offset >= MAXPHASE )
-                       return -EINVAL; 
-
-       /* if the quartz is off by more than 10% something is VERY wrong ! */
-       if (txc->modes & ADJ_TICK)
-               if (txc->tick <  900000/USER_HZ ||
-                   txc->tick > 1100000/USER_HZ)
-                       return -EINVAL;
-
-       write_seqlock_irq(&xtime_lock);
-       result = time_state;    /* mostly `TIME_OK' */
-
-       /* Save for later - semantics of adjtime is to return old value */
-       save_adjust = time_next_adjust ? time_next_adjust : time_adjust;
-
-#if 0  /* STA_CLOCKERR is never set yet */
-       time_status &= ~STA_CLOCKERR;           /* reset STA_CLOCKERR */
-#endif
-       /* If there are input parameters, then process them */
-       if (txc->modes)
-       {
-           if (txc->modes & ADJ_STATUS)        /* only set allowed bits */
-               time_status =  (txc->status & ~STA_RONLY) |
-                             (time_status & STA_RONLY);
-
-           if (txc->modes & ADJ_FREQUENCY) {   /* p. 22 */
-               if (txc->freq > MAXFREQ || txc->freq < -MAXFREQ) {
-                   result = -EINVAL;
-                   goto leave;
-               }
-               time_freq = txc->freq - pps_freq;
-           }
-
-           if (txc->modes & ADJ_MAXERROR) {
-               if (txc->maxerror < 0 || txc->maxerror >= NTP_PHASE_LIMIT) {
-                   result = -EINVAL;
-                   goto leave;
-               }
-               time_maxerror = txc->maxerror;
-           }
-
-           if (txc->modes & ADJ_ESTERROR) {
-               if (txc->esterror < 0 || txc->esterror >= NTP_PHASE_LIMIT) {
-                   result = -EINVAL;
-                   goto leave;
-               }
-               time_esterror = txc->esterror;
-           }
-
-           if (txc->modes & ADJ_TIMECONST) {   /* p. 24 */
-               if (txc->constant < 0) {        /* NTP v4 uses values > 6 */
-                   result = -EINVAL;
-                   goto leave;
-               }
-               time_constant = txc->constant;
-           }
-
-           if (txc->modes & ADJ_OFFSET) {      /* values checked earlier */
-               if (txc->modes == ADJ_OFFSET_SINGLESHOT) {
-                   /* adjtime() is independent from ntp_adjtime() */
-                   if ((time_next_adjust = txc->offset) == 0)
-                        time_adjust = 0;
-               }
-               else if ( time_status & (STA_PLL | STA_PPSTIME) ) {
-                   ltemp = (time_status & (STA_PPSTIME | STA_PPSSIGNAL)) ==
-                           (STA_PPSTIME | STA_PPSSIGNAL) ?
-                           pps_offset : txc->offset;
-
-                   /*
-                    * Scale the phase adjustment and
-                    * clamp to the operating range.
-                    */
-                   if (ltemp > MAXPHASE)
-                       time_offset = MAXPHASE << SHIFT_UPDATE;
-                   else if (ltemp < -MAXPHASE)
-                       time_offset = -(MAXPHASE << SHIFT_UPDATE);
-                   else
-                       time_offset = ltemp << SHIFT_UPDATE;
-
-                   /*
-                    * Select whether the frequency is to be controlled
-                    * and in which mode (PLL or FLL). Clamp to the operating
-                    * range. Ugly multiply/divide should be replaced someday.
-                    */
-
-                   if (time_status & STA_FREQHOLD || time_reftime == 0)
-                       time_reftime = xtime.tv_sec;
-                   mtemp = xtime.tv_sec - time_reftime;
-                   time_reftime = xtime.tv_sec;
-                   if (time_status & STA_FLL) {
-                       if (mtemp >= MINSEC) {
-                           ltemp = (time_offset / mtemp) << (SHIFT_USEC -
-                                                             SHIFT_UPDATE);
-                           time_freq += shift_right(ltemp, SHIFT_KH);
-                       } else /* calibration interval too short (p. 12) */
-                               result = TIME_ERROR;
-                   } else {    /* PLL mode */
-                       if (mtemp < MAXSEC) {
-                           ltemp *= mtemp;
-                           time_freq += shift_right(ltemp,(time_constant +
-                                                      time_constant +
-                                                      SHIFT_KF - SHIFT_USEC));
-                       } else /* calibration interval too long (p. 12) */
-                               result = TIME_ERROR;
-                   }
-                   time_freq = min(time_freq, time_tolerance);
-                   time_freq = max(time_freq, -time_tolerance);
-               } /* STA_PLL || STA_PPSTIME */
-           } /* txc->modes & ADJ_OFFSET */
-           if (txc->modes & ADJ_TICK) {
-               tick_usec = txc->tick;
-               tick_nsec = TICK_USEC_TO_NSEC(tick_usec);
-           }
-       } /* txc->modes */
-leave: if ((time_status & (STA_UNSYNC|STA_CLOCKERR)) != 0
-           || ((time_status & (STA_PPSFREQ|STA_PPSTIME)) != 0
-               && (time_status & STA_PPSSIGNAL) == 0)
-           /* p. 24, (b) */
-           || ((time_status & (STA_PPSTIME|STA_PPSJITTER))
-               == (STA_PPSTIME|STA_PPSJITTER))
-           /* p. 24, (c) */
-           || ((time_status & STA_PPSFREQ) != 0
-               && (time_status & (STA_PPSWANDER|STA_PPSERROR)) != 0))
-           /* p. 24, (d) */
-               result = TIME_ERROR;
-       
-       if ((txc->modes & ADJ_OFFSET_SINGLESHOT) == ADJ_OFFSET_SINGLESHOT)
-           txc->offset    = save_adjust;
-       else {
-           txc->offset = shift_right(time_offset, SHIFT_UPDATE);
-       }
-       txc->freq          = time_freq + pps_freq;
-       txc->maxerror      = time_maxerror;
-       txc->esterror      = time_esterror;
-       txc->status        = time_status;
-       txc->constant      = time_constant;
-       txc->precision     = time_precision;
-       txc->tolerance     = time_tolerance;
-       txc->tick          = tick_usec;
-       txc->ppsfreq       = pps_freq;
-       txc->jitter        = pps_jitter >> PPS_AVG;
-       txc->shift         = pps_shift;
-       txc->stabil        = pps_stabil;
-       txc->jitcnt        = pps_jitcnt;
-       txc->calcnt        = pps_calcnt;
-       txc->errcnt        = pps_errcnt;
-       txc->stbcnt        = pps_stbcnt;
-       write_sequnlock_irq(&xtime_lock);
-       do_gettimeofday(&txc->time);
-       notify_arch_cmos_timer();
-       return(result);
-}
-
 asmlinkage long sys_adjtimex(struct timex __user *txc_p)
 {
        struct timex txc;               /* Local copy of parameter */
@@ -437,7 +237,7 @@ EXPORT_SYMBOL(current_kernel_time);
  * current_fs_time - Return FS time
  * @sb: Superblock.
  *
- * Return the current time truncated to the time granuality supported by
+ * Return the current time truncated to the time granularity supported by
  * the fs.
  */
 struct timespec current_fs_time(struct super_block *sb)
@@ -448,11 +248,11 @@ struct timespec current_fs_time(struct super_block *sb)
 EXPORT_SYMBOL(current_fs_time);
 
 /**
- * timespec_trunc - Truncate timespec to a granuality
+ * timespec_trunc - Truncate timespec to a granularity
  * @t: Timespec
- * @gran: Granuality in ns.
+ * @gran: Granularity in ns.
  *
- * Truncate a timespec to a granuality. gran must be smaller than a second.
+ * Truncate a timespec to a granularity. gran must be smaller than a second.
  * Always rounds down.
  *
  * This function should be only used for timestamps returned by
@@ -550,6 +350,7 @@ EXPORT_SYMBOL(do_gettimeofday);
 
 
 #else
+#ifndef CONFIG_GENERIC_TIME
 /*
  * Simulate gettimeofday using do_gettimeofday which only allows a timeval
  * and therefore only yields usec accuracy
@@ -558,12 +359,13 @@ void getnstimeofday(struct timespec *tv)
 {
        struct timeval x;
 
-       do_gettimeofday(&x);
+       vx_gettimeofday(&x);
        tv->tv_sec = x.tv_sec;
        tv->tv_nsec = x.tv_usec * NSEC_PER_USEC;
 }
 EXPORT_SYMBOL_GPL(getnstimeofday);
 #endif
+#endif
 
 /* Converts Gregorian date to seconds since 1970-01-01 00:00:00.
  * Assumes input in normal date format, i.e. 1980-12-31 23:59:59
@@ -637,7 +439,7 @@ void set_normalized_timespec(struct timespec *ts, time_t sec, long nsec)
  *
  * Returns the timespec representation of the nsec parameter.
  */
-struct timespec ns_to_timespec(const nsec_t nsec)
+struct timespec ns_to_timespec(const s64 nsec)
 {
        struct timespec ts;
 
@@ -657,7 +459,7 @@ struct timespec ns_to_timespec(const nsec_t nsec)
  *
  * Returns the timeval representation of the nsec parameter.
  */
-struct timeval ns_to_timeval(const nsec_t nsec)
+struct timeval ns_to_timeval(const s64 nsec)
 {
        struct timespec ts = ns_to_timespec(nsec);
        struct timeval tv;