# More hacking for modularisation.
#
# Prompt user for primary drivers.
+
config SOUND_BT878
tristate "BT878 audio dma"
- depends on SOUND_PRIME!=n && SOUND
+ depends on SOUND_PRIME && PCI
---help---
Audio DMA support for bt878 based grabber boards. As you might have
already noticed, bt878 is listed with two functions in /proc/pci.
To compile this driver as a module, choose M here: the module will
be called btaudio.
-config SOUND_CMPCI
- tristate "C-Media PCI (CMI8338/8738)"
- depends on SOUND_PRIME!=n && SOUND && PCI
- help
- Say Y or M if you have a PCI sound card using the CMI8338
- or the CMI8738 chipset. Data on these chips are available at
- <http://www.cmedia.com.tw/>.
-
- A userspace utility to control some internal registers of these
- chips is available at
- <http://member.nifty.ne.jp/Breeze/softwares/unix/cmictl-e.html>.
-
-config SOUND_CMPCI_FM
- bool "Enable legacy FM"
- depends on SOUND_CMPCI && X86
- help
- Say Y here to enable the legacy FM (frequency-modulation) synthesizer
- support on a card using the CMI8338 or CMI8378 chipset. Even it is
- enabled, you need to set fmio as proper value to enable it.
- Say N here if you don't need this.
-
-config SOUND_CMPCI_MIDI
- bool "Enable legacy MPU-401"
- depends on SOUND_CMPCI && X86
- help
- Say Y here to enable the legacy MPU401 MIDI synthesizer support on a
- card using the CMI8338 or CMI8378 chipset. Even it is enabled,
- you need to set mpuio as proper value to enable it.
- Say N here if you don't need this.
-
-config SOUND_CMPCI_JOYSTICK
- bool "Enable joystick"
- depends on SOUND_CMPCI && X86
- help
- Say Y here in order to enable the joystick port on a sound card using
- the CMI8338 or the CMI8738 chipset. You need to config the
- gameport support and set joystick parameter as 1 to use it.
- Say N here if you don't need this.
-
config SOUND_EMU10K1
tristate "Creative SBLive! (EMU10K1)"
- depends on SOUND_PRIME!=n && SOUND && PCI
+ depends on SOUND_PRIME && PCI
---help---
Say Y or M if you have a PCI sound card using the EMU10K1 chipset,
such as the Creative SBLive!, SB PCI512 or Emu-APS.
config MIDI_EMU10K1
bool "Creative SBLive! MIDI (EXPERIMENTAL)"
- depends on SOUND_EMU10K1 && EXPERIMENTAL
+ depends on SOUND_EMU10K1 && EXPERIMENTAL && ISA_DMA_API
help
Say Y if you want to be able to use the OSS /dev/sequencer
interface. This code is still experimental.
config SOUND_FUSION
tristate "Crystal SoundFusion (CS4280/461x)"
- depends on SOUND_PRIME!=n && SOUND
+ depends on SOUND_PRIME && PCI
help
This module drives the Crystal SoundFusion devices (CS4280/46xx
series) when wired as native sound drivers with AC97 codecs. If
this driver does not work try the CS4232 driver.
-config SOUND_CS4281
- tristate "Crystal Sound CS4281"
- depends on SOUND_PRIME!=n && SOUND
- help
- Picture and feature list at
- <http://www.pcbroker.com/crystal4281.html>.
-
config SOUND_BCM_CS4297A
tristate "Crystal Sound CS4297a (for Swarm)"
- depends on SOUND_PRIME!=n && SIBYTE_SWARM && SOUND
+ depends on SOUND_PRIME && SIBYTE_SWARM
help
The BCM91250A has a Crystal CS4297a on synchronous serial
port B (in addition to the DB-9 serial port). Say Y or M
note that CONFIG_KGDB should not be enabled at the same
time, since it also attempts to use this UART port.
-config SOUND_ES1370
- tristate "Ensoniq AudioPCI (ES1370)"
- depends on SOUND_PRIME!=n && SOUND && PCI
- help
- Say Y or M if you have a PCI sound card utilizing the Ensoniq
- ES1370 chipset, such as Ensoniq's AudioPCI (non-97). To find
- out if your sound card uses an ES1370 without removing your
- computer's cover, use lspci -n and look for the PCI ID
- 1274:5000. Since Ensoniq was bought by Creative Labs,
- Sound Blaster 64/PCI models are either ES1370 or ES1371 based.
- This driver differs slightly from OSS/Free, so PLEASE READ
- <file:Documentation/sound/oss/es1370>.
-
config SOUND_ES1371
tristate "Creative Ensoniq AudioPCI 97 (ES1371)"
- depends on SOUND_PRIME!=n && SOUND && PCI
+ depends on SOUND_PRIME && PCI
help
Say Y or M if you have a PCI sound card utilizing the Ensoniq
ES1371 chipset, such as Ensoniq's AudioPCI97. To find out if
slightly from OSS/Free, so PLEASE READ
<file:Documentation/sound/oss/es1371>.
-config SOUND_ESSSOLO1
- tristate "ESS Technology Solo1"
- depends on SOUND_PRIME!=n && SOUND && PCI
- help
- Say Y or M if you have a PCI sound card utilizing the ESS Technology
- Solo1 chip. To find out if your sound card uses a
- Solo1 chip without removing your computer's cover, use
- lspci -n and look for the PCI ID 125D:1969. This driver
- differs slightly from OSS/Free, so PLEASE READ
- <file:Documentation/sound/oss/solo1>.
-
-config SOUND_MAESTRO
- tristate "ESS Maestro, Maestro2, Maestro2E driver"
- depends on SOUND_PRIME!=n && SOUND && PCI
- help
- Say Y or M if you have a sound system driven by ESS's Maestro line
- of PCI sound chips. These include the Maestro 1, Maestro 2, and
- Maestro 2E. See <file:Documentation/sound/oss/Maestro> for more
- details.
-
-config SOUND_MAESTRO3
- tristate "ESS Maestro3/Allegro driver (EXPERIMENTAL)"
- depends on SOUND_PRIME!=n && SOUND && PCI && EXPERIMENTAL
- help
- Say Y or M if you have a sound system driven by ESS's Maestro 3
- PCI sound chip.
-
config SOUND_ICH
tristate "Intel ICH (i8xx) audio support"
- depends on SOUND_PRIME!=n && PCI
+ depends on SOUND_PRIME && PCI
help
Support for integral audio in Intel's I/O Controller Hub (ICH)
chipset, as used on the 810/820/840 motherboards.
-config SOUND_HARMONY
- tristate "PA Harmony audio driver"
- depends on GSC_LASI && SOUND_PRIME!=n
- help
- Say 'Y' or 'M' to include support for Harmony soundchip
- on HP 712, 715/new and many other GSC based machines.
-
-config SOUND_SONICVIBES
- tristate "S3 SonicVibes"
- depends on SOUND_PRIME!=n && SOUND
- help
- Say Y or M if you have a PCI sound card utilizing the S3
- SonicVibes chipset. To find out if your sound card uses a
- SonicVibes chip without removing your computer's cover, use
- lspci -n and look for the PCI ID 5333:CA00. This driver
- differs slightly from OSS/Free, so PLEASE READ
- <file:Documentation/sound/oss/sonicvibes>.
-
config SOUND_VWSND
tristate "SGI Visual Workstation Sound"
- depends on SOUND_PRIME!=n && X86_VISWS && SOUND
+ depends on SOUND_PRIME && X86_VISWS
help
Say Y or M if you have an SGI Visual Workstation and you want to be
able to use its on-board audio. Read
config SOUND_HAL2
tristate "SGI HAL2 sound (EXPERIMENTAL)"
- depends on SOUND_PRIME!=n && SOUND && SGI_IP22 && EXPERIMENTAL
+ depends on SOUND_PRIME && SGI_IP22 && EXPERIMENTAL
help
Say Y or M if you have an SGI Indy system and want to be able to
use it's on-board A2 audio system.
config SOUND_IT8172
tristate "IT8172G Sound"
- depends on SOUND_PRIME!=n && (MIPS_ITE8172 || MIPS_IVR) && SOUND
+ depends on SOUND_PRIME && (MIPS_ITE8172 || MIPS_IVR)
config SOUND_VRC5477
tristate "NEC Vrc5477 AC97 sound"
- depends on SOUND_PRIME!=n && DDB5477 && SOUND
+ depends on SOUND_PRIME && DDB5477
help
Say Y here to enable sound support for the NEC Vrc5477 chip, an
integrated, multi-function controller chip for MIPS CPUs. Works
with the AC97 codec.
-config SOUND_AU1000
- tristate "Au1000 Sound"
- depends on SOUND_PRIME!=n && (SOC_AU1000 || SOC_AU1100 || SOC_AU1500) && SOUND
-
config SOUND_AU1550_AC97
tristate "Au1550 AC97 Sound"
- depends on SOUND_PRIME!=n && SOC_AU1550 && SOUND
+ depends on SOUND_PRIME && SOC_AU1550
config SOUND_TRIDENT
tristate "Trident 4DWave DX/NX, SiS 7018 or ALi 5451 PCI Audio Core"
- depends on SOUND_PRIME!=n && SOUND
+ depends on SOUND_PRIME && PCI
---help---
Say Y or M if you have a PCI sound card utilizing the Trident
4DWave-DX/NX chipset or your mother board chipset has SiS 7018
config SOUND_MSNDCLAS
tristate "Support for Turtle Beach MultiSound Classic, Tahiti, Monterey"
- depends on SOUND_PRIME!=n && SOUND && (m || !STANDALONE)
+ depends on SOUND_PRIME && (m || !STANDALONE)
help
Say M here if you have a Turtle Beach MultiSound Classic, Tahiti or
Monterey (not for the Pinnacle or Fiji).
config SOUND_MSNDPIN
tristate "Support for Turtle Beach MultiSound Pinnacle, Fiji"
- depends on SOUND_PRIME!=n && SOUND && (m || !STANDALONE)
+ depends on SOUND_PRIME && (m || !STANDALONE)
help
Say M here if you have a Turtle Beach MultiSound Pinnacle or Fiji.
See <file:Documentation/sound/oss/MultiSound> for important information
config SOUND_VIA82CXXX
tristate "VIA 82C686 Audio Codec"
- depends on SOUND_PRIME!=n && PCI
+ depends on SOUND_PRIME && PCI
help
Say Y here to include support for the audio codec found on VIA
82Cxxx-based chips. Typically these are built into a motherboard.
config MIDI_VIA82CXXX
bool "VIA 82C686 MIDI"
- depends on SOUND_VIA82CXXX
+ depends on SOUND_VIA82CXXX && ISA_DMA_API
help
Answer Y to use the MIDI interface of the Via686. You may need to
enable this in the BIOS before it will work. This is for connection
config SOUND_OSS
tristate "OSS sound modules"
- depends on SOUND_PRIME!=n && SOUND
+ depends on SOUND_PRIME && ISA_DMA_API
help
OSS is the Open Sound System suite of sound card drivers. They make
sound programming easier since they provide a common API. Say Y or
Say M here if you have a sound card based on the Analog Devices
AD1889 chip.
-config SOUND_SGALAXY
- tristate "Aztech Sound Galaxy (non-PnP) cards"
- depends on SOUND_OSS
- help
- This module initializes the older non Plug and Play sound galaxy
- cards from Aztech. It supports the Waverider Pro 32 - 3D and the
- Galaxy Washington 16.
-
- If you compile the driver into the kernel, you have to add
- "sgalaxy=<io>,<irq>,<dma>,<dma2>,<sgbase>" to the kernel command
- line.
-
config SOUND_ADLIB
tristate "Adlib Cards"
depends on SOUND_OSS
See <file:Documentation/sound/oss/CS4232> for more information on
configuring this card.
-config SOUND_SSCAPE
- tristate "Ensoniq SoundScape support"
- depends on SOUND_OSS
- help
- Answer Y if you have a sound card based on the Ensoniq SoundScape
- chipset. Such cards are being manufactured at least by Ensoniq, Spea
- and Reveal (Reveal makes also other cards).
-
- If you compile the driver into the kernel, you have to add
- "sscape=<io>,<irq>,<dma>,<mpuio>,<mpuirq>" to the kernel command
- line.
-
-config SOUND_GUS
- tristate "Gravis Ultrasound support"
- depends on SOUND_OSS
- help
- Say Y here for any type of Gravis Ultrasound card, including the GUS
- or GUS MAX. See also <file:Documentation/sound/oss/ultrasound> for more
- information on configuring this card with modules.
-
- If you compile the driver into the kernel, you have to add
- "gus=<io>,<irq>,<dma>,<dma2>" to the kernel command line.
-
-config SOUND_GUS16
- bool "16 bit sampling option of GUS (_NOT_ GUS MAX)"
- depends on SOUND_GUS
- help
- Support for Gravis Ulstrasound (GUS) cards (other than the GUS),
- sampling at 16-bit width.
-
-config SOUND_GUSMAX
- bool "GUS MAX support"
- depends on SOUND_GUS
- help
- Support for Gravis Ulstrasound MAX.
-
config SOUND_VMIDI
tristate "Loopback MIDI device support"
depends on SOUND_OSS
See <file:Documentation/sound/oss/NM256> for further information.
-config SOUND_MAD16
- tristate "OPTi MAD16 and/or Mozart based cards"
- depends on SOUND_OSS
- ---help---
- Answer Y if your card has a Mozart (OAK OTI-601) or MAD16 (OPTi
- 82C928 or 82C929 or 82C931) audio interface chip. These chips are
- quite common so it's possible that many no-name cards have one of
- them. In addition the MAD16 chip is used in some cards made by known
- manufacturers such as Turtle Beach (Tropez), Reveal (some models)
- and Diamond (latest ones). Note however that the Tropez sound cards
- have their own driver; if you have one of those, say N here and Y or
- M to "Full support for Turtle Beach WaveFront", below.
-
- If you compile the driver into the kernel, you have to add
- "mad16=<io>,<irq>,<dma>,<dma2>,<mpuio>,<mpuirq>" to the
- kernel command line.
-
- See also <file:Documentation/sound/oss/Opti> and
- <file:Documentation/sound/oss/MAD16> for more information on setting
- these cards up as modules.
-
-config MAD16_OLDCARD
- bool "Support MIDI in older MAD16 based cards (requires SB)"
- depends on SOUND_MAD16
- help
- Answer Y (or M) if you have an older card based on the C928 or
- Mozart chipset and you want to have MIDI support. If you enable this
- option you also need to enable support for Sound Blaster.
-
config SOUND_PAS
tristate "ProAudioSpectrum 16 support"
depends on SOUND_OSS
You can say M here to compile this driver as a module; the module is
called sb.
-config SOUND_AWE32_SYNTH
- tristate "AWE32 synth"
- depends on SOUND_OSS
- help
- Say Y here if you have a Sound Blaster SB32, AWE32-PnP, SB AWE64 or
- similar sound card. See <file:Documentation/sound/oss/README.awe>,
- <file:Documentation/sound/oss/AWE32> and the Soundblaster-AWE
- mini-HOWTO, available from <http://www.tldp.org/docs.html#howto>
- for more info.
-
-config SOUND_WAVEFRONT
- tristate "Full support for Turtle Beach WaveFront (Tropez Plus, Tropez, Maui) synth/soundcards"
- depends on SOUND_OSS && m
- help
- Answer Y or M if you have a Tropez Plus, Tropez or Maui sound card
- and read the files <file:Documentation/sound/oss/Wavefront> and
- <file:Documentation/sound/oss/Tropez+>.
-
-config SOUND_MAUI
- tristate "Limited support for Turtle Beach Wave Front (Maui, Tropez) synthesizers"
- depends on SOUND_OSS
- help
- Say Y here if you have a Turtle Beach Wave Front, Maui, or Tropez
- sound card.
-
- If you compile the driver into the kernel, you have to add
- "maui=<io>,<irq>" to the kernel command line.
-
-config MAUI_HAVE_BOOT
- bool "Have OSWF.MOT firmware file"
- depends on SOUND_MAUI=y && !STANDALONE
- help
- Turtle Beach Maui and Tropez sound cards have a microcontroller
- which needs to be initialized prior to use. OSWF.MOT is a file
- distributed with the card's DOS/Windows drivers. Answer Y if you
- have this file.
-
-config MAUI_BOOT_FILE
- string "Full pathname of OSWF.MOT firmware file"
- depends on MAUI_HAVE_BOOT
- default "/etc/sound/oswf.mot"
- help
- Enter the full pathname of your OSWF.MOT file, starting from /.
-
config SOUND_YM3812
tristate "Yamaha FM synthesizer (YM3812/OPL-3) support"
depends on SOUND_OSS
If unsure, say Y.
-config SOUND_OPL3SA1
- tristate "Yamaha OPL3-SA1 audio controller"
- depends on SOUND_OSS
- help
- Say Y or M if you have a Yamaha OPL3-SA1 sound chip, which is
- usually built into motherboards. Read
- <file:Documentation/sound/oss/OPL3-SA> for details.
-
- If you compile the driver into the kernel, you have to add
- "opl3sa=<io>,<irq>,<dma>,<dma2>,<mpuio>,<mpuirq>" to the kernel
- command line.
-
config SOUND_OPL3SA2
tristate "Yamaha OPL3-SA2 and SA3 based PnP cards"
depends on SOUND_OSS
"opl3sa2=<io>,<irq>,<dma>,<dma2>,<mssio>,<mpuio>" to the kernel
command line.
-config SOUND_YMFPCI
- tristate "Yamaha YMF7xx PCI audio (native mode)"
- depends on SOUND_OSS && PCI
- help
- Support for Yamaha cards including the YMF711, YMF715, YMF718,
- YMF719, YMF724, Waveforce 192XG, and Waveforce 192 Digital.
-
-config SOUND_YMFPCI_LEGACY
- bool "Yamaha PCI legacy ports support"
- depends on SOUND_YMFPCI
- help
- Support for YMF7xx PCI cards emulating an MP401.
-
config SOUND_UART6850
tristate "6850 UART support"
depends on SOUND_OSS
config SOUND_TVMIXER
tristate "TV card (bt848) mixer support"
- depends on SOUND_PRIME!=n && SOUND && I2C
+ depends on SOUND_PRIME && I2C
help
Support for audio mixer facilities on the BT848 TV frame-grabber
card.
tristate "XpressAudio Sound Blaster emulation"
depends on SOUND_SB
-config SOUND_ALI5455
- tristate "ALi5455 audio support"
- depends on SOUND_PRIME!=n && PCI
-
-config SOUND_FORTE
- tristate "ForteMedia FM801 driver"
- depends on SOUND_PRIME!=n && PCI
- help
- Say Y or M if you want driver support for the ForteMedia FM801 PCI
- audio controller (Abit AU10, Genius Sound Maker, HP Workstation
- zx2000, and others).
-
-config SOUND_RME96XX
- tristate "RME Hammerfall (RME96XX) support"
- depends on SOUND_PRIME!=n && PCI
- help
- Say Y or M if you have a Hammerfall or Hammerfall light
- multichannel card from RME. If you want to access advanced
- features of the card, read <file:Documentation/sound/oss/rme96xx>.
-
-config SOUND_AD1980
- tristate "AD1980 front/back switch plugin"
- depends on SOUND_PRIME!=n
-
config SOUND_SH_DAC_AUDIO
tristate "SuperH DAC audio support"
- depends on SOUND_PRIME!=n && SOUND && CPU_SH3
+ depends on SOUND_PRIME && CPU_SH3
config SOUND_SH_DAC_AUDIO_CHANNEL
int " DAC channel"
git://git.onelab.eu / linux-2.6.git / blobdiff