#
# Prompt user for primary drivers.
-config OBSOLETE_OSS_DRIVER
- bool "Obsolete OSS drivers"
- depends on SOUND_PRIME
- help
- This option enables support for obsolete OSS drivers that
- have been removed in kernel 2.6.17.
-
- If unsure, say N.
-
config SOUND_BT878
tristate "BT878 audio dma"
- depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
+ depends on SOUND_PRIME && PCI
---help---
Audio DMA support for bt878 based grabber boards. As you might have
already noticed, bt878 is listed with two functions in /proc/pci.
To compile this driver as a module, choose M here: the module will
be called btaudio.
-config SOUND_CMPCI
- tristate "C-Media PCI (CMI8338/8738)"
- depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
- help
- Say Y or M if you have a PCI sound card using the CMI8338
- or the CMI8738 chipset. Data on these chips are available at
- <http://www.cmedia.com.tw/>.
-
- A userspace utility to control some internal registers of these
- chips is available at
- <http://member.nifty.ne.jp/Breeze/softwares/unix/cmictl-e.html>.
-
-config SOUND_CMPCI_FM
- bool "Enable legacy FM"
- depends on SOUND_CMPCI && X86
- help
- Say Y here to enable the legacy FM (frequency-modulation) synthesizer
- support on a card using the CMI8338 or CMI8378 chipset. Even it is
- enabled, you need to set fmio as proper value to enable it.
- Say N here if you don't need this.
-
-config SOUND_CMPCI_MIDI
- bool "Enable legacy MPU-401"
- depends on SOUND_CMPCI && X86
- help
- Say Y here to enable the legacy MPU401 MIDI synthesizer support on a
- card using the CMI8338 or CMI8378 chipset. Even it is enabled,
- you need to set mpuio as proper value to enable it.
- Say N here if you don't need this.
-
-config SOUND_CMPCI_JOYSTICK
- bool "Enable joystick"
- depends on SOUND_CMPCI && X86 && (GAMEPORT=y || SOUND_CMPCI=GAMEPORT)
- help
- Say Y here in order to enable the joystick port on a sound card using
- the CMI8338 or the CMI8738 chipset. You need to config the
- gameport support and set joystick parameter as 1 to use it.
- Say N here if you don't need this.
-
-config SOUND_EMU10K1
- tristate "Creative SBLive! (EMU10K1)"
- depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
- ---help---
- Say Y or M if you have a PCI sound card using the EMU10K1 chipset,
- such as the Creative SBLive!, SB PCI512 or Emu-APS.
-
- For more information on this driver and the degree of support for
- the different card models please check:
-
- <http://sourceforge.net/projects/emu10k1/>
-
- It is now possible to load dsp microcode patches into the EMU10K1
- chip. These patches are used to implement real time sound
- processing effects which include for example: signal routing,
- bass/treble control, AC3 passthrough, ...
- Userspace tools to create new patches and load/unload them can be
- found in the emu-tools package at the above URL.
-
-config MIDI_EMU10K1
- bool "Creative SBLive! MIDI (EXPERIMENTAL)"
- depends on SOUND_EMU10K1 && EXPERIMENTAL && ISA_DMA_API
- help
- Say Y if you want to be able to use the OSS /dev/sequencer
- interface. This code is still experimental.
-
-config SOUND_FUSION
- tristate "Crystal SoundFusion (CS4280/461x)"
- depends on SOUND_PRIME && PCI
- help
- This module drives the Crystal SoundFusion devices (CS4280/46xx
- series) when wired as native sound drivers with AC97 codecs. If
- this driver does not work try the CS4232 driver.
-
-config SOUND_CS4281
- tristate "Crystal Sound CS4281"
- depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
- help
- Picture and feature list at
- <http://www.pcbroker.com/crystal4281.html>.
-
config SOUND_BCM_CS4297A
tristate "Crystal Sound CS4297a (for Swarm)"
depends on SOUND_PRIME && SIBYTE_SWARM
note that CONFIG_KGDB should not be enabled at the same
time, since it also attempts to use this UART port.
-config SOUND_ES1370
- tristate "Ensoniq AudioPCI (ES1370)"
- depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
- help
- Say Y or M if you have a PCI sound card utilizing the Ensoniq
- ES1370 chipset, such as Ensoniq's AudioPCI (non-97). To find
- out if your sound card uses an ES1370 without removing your
- computer's cover, use lspci -n and look for the PCI ID
- 1274:5000. Since Ensoniq was bought by Creative Labs,
- Sound Blaster 64/PCI models are either ES1370 or ES1371 based.
- This driver differs slightly from OSS/Free, so PLEASE READ
- <file:Documentation/sound/oss/es1370>.
-
config SOUND_ES1371
tristate "Creative Ensoniq AudioPCI 97 (ES1371)"
- depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
+ depends on SOUND_PRIME && PCI
help
Say Y or M if you have a PCI sound card utilizing the Ensoniq
ES1371 chipset, such as Ensoniq's AudioPCI97. To find out if
slightly from OSS/Free, so PLEASE READ
<file:Documentation/sound/oss/es1371>.
-config SOUND_ESSSOLO1
- tristate "ESS Technology Solo1"
- depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
- help
- Say Y or M if you have a PCI sound card utilizing the ESS Technology
- Solo1 chip. To find out if your sound card uses a
- Solo1 chip without removing your computer's cover, use
- lspci -n and look for the PCI ID 125D:1969. This driver
- differs slightly from OSS/Free, so PLEASE READ
- <file:Documentation/sound/oss/solo1>.
-
-config SOUND_MAESTRO
- tristate "ESS Maestro, Maestro2, Maestro2E driver"
- depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
- help
- Say Y or M if you have a sound system driven by ESS's Maestro line
- of PCI sound chips. These include the Maestro 1, Maestro 2, and
- Maestro 2E. See <file:Documentation/sound/oss/Maestro> for more
- details.
-
-config SOUND_MAESTRO3
- tristate "ESS Maestro3/Allegro driver (EXPERIMENTAL)"
- depends on SOUND_PRIME && PCI && EXPERIMENTAL && OBSOLETE_OSS_DRIVER
- help
- Say Y or M if you have a sound system driven by ESS's Maestro 3
- PCI sound chip.
-
config SOUND_ICH
tristate "Intel ICH (i8xx) audio support"
depends on SOUND_PRIME && PCI
Support for integral audio in Intel's I/O Controller Hub (ICH)
chipset, as used on the 810/820/840 motherboards.
-config SOUND_HARMONY
- tristate "PA Harmony audio driver"
- depends on GSC_LASI && SOUND_PRIME && OBSOLETE_OSS_DRIVER
- help
- Say 'Y' or 'M' to include support for Harmony soundchip
- on HP 712, 715/new and many other GSC based machines.
-
-config SOUND_SONICVIBES
- tristate "S3 SonicVibes"
- depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
- help
- Say Y or M if you have a PCI sound card utilizing the S3
- SonicVibes chipset. To find out if your sound card uses a
- SonicVibes chip without removing your computer's cover, use
- lspci -n and look for the PCI ID 5333:CA00. This driver
- differs slightly from OSS/Free, so PLEASE READ
- <file:Documentation/sound/oss/sonicvibes>.
-
config SOUND_VWSND
tristate "SGI Visual Workstation Sound"
depends on SOUND_PRIME && X86_VISWS
tristate "SGI HAL2 sound (EXPERIMENTAL)"
depends on SOUND_PRIME && SGI_IP22 && EXPERIMENTAL
help
- Say Y or M if you have an SGI Indy system and want to be able to
- use it's on-board A2 audio system.
-
-config SOUND_IT8172
- tristate "IT8172G Sound"
- depends on SOUND_PRIME && (MIPS_ITE8172 || MIPS_IVR)
+ Say Y or M if you have an SGI Indy or Indigo2 system and want to be able to
+ use its on-board A2 audio system.
config SOUND_VRC5477
tristate "NEC Vrc5477 AC97 sound"
integrated, multi-function controller chip for MIPS CPUs. Works
with the AC97 codec.
-config SOUND_AU1000
- tristate "Au1000 Sound"
- depends on SOUND_PRIME && (SOC_AU1000 || SOC_AU1100 || SOC_AU1500) && OBSOLETE_OSS_DRIVER
-
config SOUND_AU1550_AC97
- tristate "Au1550 AC97 Sound"
- depends on SOUND_PRIME && SOC_AU1550
+ tristate "Au1550/Au1200 AC97 Sound"
+ select SND_AC97_CODEC
+ depends on SOUND_PRIME && (SOC_AU1550 || SOC_AU1200)
config SOUND_TRIDENT
tristate "Trident 4DWave DX/NX, SiS 7018 or ALi 5451 PCI Audio Core"
system support" and "Sysctl support", and after the /proc file
system has been mounted, executing the command
- command what is enabled
+ command what is enabled
echo 0>/proc/ALi5451 pcm out is also set to S/PDIF out. (Default).
config SOUND_VIA82CXXX
tristate "VIA 82C686 Audio Codec"
- depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
+ depends on SOUND_PRIME && PCI
help
Say Y here to include support for the audio codec found on VIA
82Cxxx-based chips. Typically these are built into a motherboard.
Say Y unless you have 16MB or more RAM or a PCI sound card.
-config SOUND_AD1816
- tristate "AD1816(A) based cards (EXPERIMENTAL)"
- depends on EXPERIMENTAL && SOUND_OSS
- help
- Say M here if you have a sound card based on the Analog Devices
- AD1816(A) chip.
-
- If you compile the driver into the kernel, you have to add
- "ad1816=<io>,<irq>,<dma>,<dma2>" to the kernel command line.
-
-config SOUND_AD1889
- tristate "AD1889 based cards (AD1819 codec) (EXPERIMENTAL)"
- depends on EXPERIMENTAL && SOUND_OSS && PCI
- help
- Say M here if you have a sound card based on the Analog Devices
- AD1889 chip.
-
-config SOUND_SGALAXY
- tristate "Aztech Sound Galaxy (non-PnP) cards"
- depends on SOUND_OSS && OBSOLETE_OSS_DRIVER
- help
- This module initializes the older non Plug and Play sound galaxy
- cards from Aztech. It supports the Waverider Pro 32 - 3D and the
- Galaxy Washington 16.
-
- If you compile the driver into the kernel, you have to add
- "sgalaxy=<io>,<irq>,<dma>,<dma2>,<sgbase>" to the kernel command
- line.
-
-config SOUND_ADLIB
- tristate "Adlib Cards"
- depends on SOUND_OSS
- help
- Includes ASB 64 4D. Information on programming AdLib cards is
- available at <http://www.itsnet.com/home/ldragon/Specs/adlib.html>.
-
-config SOUND_ACI_MIXER
- tristate "ACI mixer (miroSOUND PCM1-pro/PCM12/PCM20)"
- depends on SOUND_OSS
- ---help---
- ACI (Audio Command Interface) is a protocol used to communicate with
- the microcontroller on some sound cards produced by miro and
- Cardinal Technologies. The main function of the ACI is to control
- the mixer and to get a product identification.
-
- This VoxWare ACI driver currently supports the ACI functions on the
- miroSOUND PCM1-pro, PCM12 and PCM20 radio. On the PCM20 radio, ACI
- also controls the radio tuner. This is supported in the video4linux
- miropcm20 driver (say M or Y here and go back to "Multimedia
- devices" -> "Radio Adapters").
-
- This driver is also available as a module and will be called aci.
-
config SOUND_CS4232
tristate "Crystal CS4232 based (PnP) cards"
- depends on SOUND_OSS && OBSOLETE_OSS_DRIVER
+ depends on SOUND_OSS
help
Say Y here if you have a card based on the Crystal CS4232 chip set,
which uses its own Plug and Play protocol.
"sscape=<io>,<irq>,<dma>,<mpuio>,<mpuirq>" to the kernel command
line.
-config SOUND_GUS
- tristate "Gravis Ultrasound support"
- depends on SOUND_OSS && OBSOLETE_OSS_DRIVER
- help
- Say Y here for any type of Gravis Ultrasound card, including the GUS
- or GUS MAX. See also <file:Documentation/sound/oss/ultrasound> for more
- information on configuring this card with modules.
-
- If you compile the driver into the kernel, you have to add
- "gus=<io>,<irq>,<dma>,<dma2>" to the kernel command line.
-
-config SOUND_GUS16
- bool "16 bit sampling option of GUS (_NOT_ GUS MAX)"
- depends on SOUND_GUS
- help
- Support for Gravis Ulstrasound (GUS) cards (other than the GUS),
- sampling at 16-bit width.
-
-config SOUND_GUSMAX
- bool "GUS MAX support"
- depends on SOUND_GUS
- help
- Support for Gravis Ulstrasound MAX.
config SOUND_VMIDI
tristate "Loopback MIDI device support"
If you compile the driver into the kernel, you have to add
"mpu401=<io>,<irq>" to the kernel command line.
-config SOUND_NM256
- tristate "NM256AV/NM256ZX audio support"
- depends on SOUND_OSS && OBSOLETE_OSS_DRIVER
- help
- Say M here to include audio support for the NeoMagic 256AV/256ZX
- chipsets. These are the audio chipsets found in the Sony
- Z505S/SX/DX, some Sony F-series, and the Dell Latitude CPi and CPt
- laptops. It includes support for an AC97-compatible mixer and an
- apparently proprietary sound engine.
-
- See <file:Documentation/sound/oss/NM256> for further information.
-
-config SOUND_MAD16
- tristate "OPTi MAD16 and/or Mozart based cards"
- depends on SOUND_OSS && OBSOLETE_OSS_DRIVER
- ---help---
- Answer Y if your card has a Mozart (OAK OTI-601) or MAD16 (OPTi
- 82C928 or 82C929 or 82C931) audio interface chip. These chips are
- quite common so it's possible that many no-name cards have one of
- them. In addition the MAD16 chip is used in some cards made by known
- manufacturers such as Turtle Beach (Tropez), Reveal (some models)
- and Diamond (latest ones). Note however that the Tropez sound cards
- have their own driver; if you have one of those, say N here and Y or
- M to "Full support for Turtle Beach WaveFront", below.
-
- If you compile the driver into the kernel, you have to add
- "mad16=<io>,<irq>,<dma>,<dma2>,<mpuio>,<mpuirq>" to the
- kernel command line.
-
- See also <file:Documentation/sound/oss/Opti> and
- <file:Documentation/sound/oss/MAD16> for more information on setting
- these cards up as modules.
-
-config MAD16_OLDCARD
- bool "Support MIDI in older MAD16 based cards (requires SB)"
- depends on SOUND_MAD16
- help
- Answer Y (or M) if you have an older card based on the C928 or
- Mozart chipset and you want to have MIDI support. If you enable this
- option you also need to enable support for Sound Blaster.
-
config SOUND_PAS
tristate "ProAudioSpectrum 16 support"
depends on SOUND_OSS
command line.
config PSS_MIXER
- bool "Enable PSS mixer (Beethoven ADSP-16 and other compatibile)"
+ bool "Enable PSS mixer (Beethoven ADSP-16 and other compatible)"
depends on SOUND_PSS
help
Answer Y for Beethoven ADSP-16. You may try to say Y also for other
You can say M here to compile this driver as a module; the module is
called sb.
-config SOUND_AWE32_SYNTH
- tristate "AWE32 synth"
- depends on SOUND_OSS && OBSOLETE_OSS_DRIVER
- help
- Say Y here if you have a Sound Blaster SB32, AWE32-PnP, SB AWE64 or
- similar sound card. See <file:Documentation/sound/oss/README.awe>,
- <file:Documentation/sound/oss/AWE32> and the Soundblaster-AWE
- mini-HOWTO, available from <http://www.tldp.org/docs.html#howto>
- for more info.
-
-config SOUND_WAVEFRONT
- tristate "Full support for Turtle Beach WaveFront (Tropez Plus, Tropez, Maui) synth/soundcards"
- depends on SOUND_OSS && m && OBSOLETE_OSS_DRIVER
- help
- Answer Y or M if you have a Tropez Plus, Tropez or Maui sound card
- and read the files <file:Documentation/sound/oss/Wavefront> and
- <file:Documentation/sound/oss/Tropez+>.
-
-config SOUND_MAUI
- tristate "Limited support for Turtle Beach Wave Front (Maui, Tropez) synthesizers"
- depends on SOUND_OSS && OBSOLETE_OSS_DRIVER
- help
- Say Y here if you have a Turtle Beach Wave Front, Maui, or Tropez
- sound card.
-
- If you compile the driver into the kernel, you have to add
- "maui=<io>,<irq>" to the kernel command line.
-
-config MAUI_HAVE_BOOT
- bool "Have OSWF.MOT firmware file"
- depends on SOUND_MAUI=y && !STANDALONE
- help
- Turtle Beach Maui and Tropez sound cards have a microcontroller
- which needs to be initialized prior to use. OSWF.MOT is a file
- distributed with the card's DOS/Windows drivers. Answer Y if you
- have this file.
-
-config MAUI_BOOT_FILE
- string "Full pathname of OSWF.MOT firmware file"
- depends on MAUI_HAVE_BOOT
- default "/etc/sound/oswf.mot"
- help
- Enter the full pathname of your OSWF.MOT file, starting from /.
-
config SOUND_YM3812
tristate "Yamaha FM synthesizer (YM3812/OPL-3) support"
- depends on SOUND_OSS && OBSOLETE_OSS_DRIVER
+ depends on SOUND_OSS
---help---
Answer Y if your card has a FM chip made by Yamaha (OPL2/OPL3/OPL4).
Answering Y is usually a safe and recommended choice, however some
If unsure, say Y.
-config SOUND_OPL3SA1
- tristate "Yamaha OPL3-SA1 audio controller"
- depends on SOUND_OSS && OBSOLETE_OSS_DRIVER
- help
- Say Y or M if you have a Yamaha OPL3-SA1 sound chip, which is
- usually built into motherboards. Read
- <file:Documentation/sound/oss/OPL3-SA> for details.
-
- If you compile the driver into the kernel, you have to add
- "opl3sa=<io>,<irq>,<dma>,<dma2>,<mpuio>,<mpuirq>" to the kernel
- command line.
-
-config SOUND_OPL3SA2
- tristate "Yamaha OPL3-SA2 and SA3 based PnP cards"
- depends on SOUND_OSS
- help
- Say Y or M if you have a card based on one of these Yamaha sound
- chipsets or the "SAx", which is actually a SA3. Read
- <file:Documentation/sound/oss/OPL3-SA2> for more information on
- configuring these cards.
-
- If you compile the driver into the kernel and do not also
- configure in the optional ISA PnP support, you will have to add
- "opl3sa2=<io>,<irq>,<dma>,<dma2>,<mssio>,<mpuio>" to the kernel
- command line.
-
-config SOUND_YMFPCI
- tristate "Yamaha YMF7xx PCI audio (native mode)"
- depends on SOUND_OSS && PCI && OBSOLETE_OSS_DRIVER
- help
- Support for Yamaha cards including the YMF711, YMF715, YMF718,
- YMF719, YMF724, Waveforce 192XG, and Waveforce 192 Digital.
-
-config SOUND_YMFPCI_LEGACY
- bool "Yamaha PCI legacy ports support"
- depends on SOUND_YMFPCI
- help
- Support for YMF7xx PCI cards emulating an MP401.
-
config SOUND_UART6850
tristate "6850 UART support"
depends on SOUND_OSS
config SOUND_TVMIXER
tristate "TV card (bt848) mixer support"
- depends on SOUND_PRIME && I2C
+ depends on SOUND_PRIME && I2C && VIDEO_V4L1
help
Support for audio mixer facilities on the BT848 TV frame-grabber
card.
tristate "XpressAudio Sound Blaster emulation"
depends on SOUND_SB
-config SOUND_ALI5455
- tristate "ALi5455 audio support"
- depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
-
-config SOUND_FORTE
- tristate "ForteMedia FM801 driver"
- depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
- help
- Say Y or M if you want driver support for the ForteMedia FM801 PCI
- audio controller (Abit AU10, Genius Sound Maker, HP Workstation
- zx2000, and others).
-
-config SOUND_RME96XX
- tristate "RME Hammerfall (RME96XX) support"
- depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
- help
- Say Y or M if you have a Hammerfall or Hammerfall light
- multichannel card from RME. If you want to access advanced
- features of the card, read <file:Documentation/sound/oss/rme96xx>.
-
-config SOUND_AD1980
- tristate "AD1980 front/back switch plugin"
- depends on SOUND_PRIME && OBSOLETE_OSS_DRIVER
-
config SOUND_SH_DAC_AUDIO
tristate "SuperH DAC audio support"
depends on SOUND_PRIME && CPU_SH3
config SOUND_SH_DAC_AUDIO_CHANNEL
- int " DAC channel"
+ int "DAC channel"
default "1"
depends on SOUND_SH_DAC_AUDIO
git://git.onelab.eu / linux-2.6.git / blobdiff