#
# Prompt user for primary drivers.
-config OSS_OBSOLETE_DRIVER
+config OBSOLETE_OSS_DRIVER
bool "Obsolete OSS drivers"
depends on SOUND_PRIME
help
This option enables support for obsolete OSS drivers that
- are scheduled for removal in the near future since there
- are ALSA drivers for the same hardware.
-
- Please contact Adrian Bunk <bunk@stusta.de> if you had to
- say Y here because your soundcard is not properly supported
- by ALSA.
+ have been removed in kernel 2.6.17.
If unsure, say N.
config SOUND_BT878
tristate "BT878 audio dma"
- depends on SOUND_PRIME && PCI
+ depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
---help---
Audio DMA support for bt878 based grabber boards. As you might have
already noticed, bt878 is listed with two functions in /proc/pci.
To compile this driver as a module, choose M here: the module will
be called btaudio.
+config SOUND_CMPCI
+ tristate "C-Media PCI (CMI8338/8738)"
+ depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
+ help
+ Say Y or M if you have a PCI sound card using the CMI8338
+ or the CMI8738 chipset. Data on these chips are available at
+ <http://www.cmedia.com.tw/>.
+
+ A userspace utility to control some internal registers of these
+ chips is available at
+ <http://member.nifty.ne.jp/Breeze/softwares/unix/cmictl-e.html>.
+
+config SOUND_CMPCI_FM
+ bool "Enable legacy FM"
+ depends on SOUND_CMPCI && X86
+ help
+ Say Y here to enable the legacy FM (frequency-modulation) synthesizer
+ support on a card using the CMI8338 or CMI8378 chipset. Even it is
+ enabled, you need to set fmio as proper value to enable it.
+ Say N here if you don't need this.
+
+config SOUND_CMPCI_MIDI
+ bool "Enable legacy MPU-401"
+ depends on SOUND_CMPCI && X86
+ help
+ Say Y here to enable the legacy MPU401 MIDI synthesizer support on a
+ card using the CMI8338 or CMI8378 chipset. Even it is enabled,
+ you need to set mpuio as proper value to enable it.
+ Say N here if you don't need this.
+
+config SOUND_CMPCI_JOYSTICK
+ bool "Enable joystick"
+ depends on SOUND_CMPCI && X86 && (GAMEPORT=y || SOUND_CMPCI=GAMEPORT)
+ help
+ Say Y here in order to enable the joystick port on a sound card using
+ the CMI8338 or the CMI8738 chipset. You need to config the
+ gameport support and set joystick parameter as 1 to use it.
+ Say N here if you don't need this.
+
config SOUND_EMU10K1
tristate "Creative SBLive! (EMU10K1)"
- depends on SOUND_PRIME && PCI && OSS_OBSOLETE_DRIVER
+ depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
---help---
Say Y or M if you have a PCI sound card using the EMU10K1 chipset,
such as the Creative SBLive!, SB PCI512 or Emu-APS.
For more information on this driver and the degree of support for
the different card models please check:
- <http://sourceforge.net/projects/emu10k1/>
+ <http://sourceforge.net/projects/emu10k1/>
It is now possible to load dsp microcode patches into the EMU10K1
chip. These patches are used to implement real time sound
config SOUND_FUSION
tristate "Crystal SoundFusion (CS4280/461x)"
- depends on SOUND_PRIME && PCI && OSS_OBSOLETE_DRIVER
+ depends on SOUND_PRIME && PCI
help
This module drives the Crystal SoundFusion devices (CS4280/46xx
series) when wired as native sound drivers with AC97 codecs. If
this driver does not work try the CS4232 driver.
+config SOUND_CS4281
+ tristate "Crystal Sound CS4281"
+ depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
+ help
+ Picture and feature list at
+ <http://www.pcbroker.com/crystal4281.html>.
+
config SOUND_BCM_CS4297A
tristate "Crystal Sound CS4297a (for Swarm)"
depends on SOUND_PRIME && SIBYTE_SWARM
note that CONFIG_KGDB should not be enabled at the same
time, since it also attempts to use this UART port.
+config SOUND_ES1370
+ tristate "Ensoniq AudioPCI (ES1370)"
+ depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
+ help
+ Say Y or M if you have a PCI sound card utilizing the Ensoniq
+ ES1370 chipset, such as Ensoniq's AudioPCI (non-97). To find
+ out if your sound card uses an ES1370 without removing your
+ computer's cover, use lspci -n and look for the PCI ID
+ 1274:5000. Since Ensoniq was bought by Creative Labs,
+ Sound Blaster 64/PCI models are either ES1370 or ES1371 based.
+ This driver differs slightly from OSS/Free, so PLEASE READ
+ <file:Documentation/sound/oss/es1370>.
+
config SOUND_ES1371
tristate "Creative Ensoniq AudioPCI 97 (ES1371)"
- depends on SOUND_PRIME && PCI
+ depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
help
Say Y or M if you have a PCI sound card utilizing the Ensoniq
ES1371 chipset, such as Ensoniq's AudioPCI97. To find out if
slightly from OSS/Free, so PLEASE READ
<file:Documentation/sound/oss/es1371>.
+config SOUND_ESSSOLO1
+ tristate "ESS Technology Solo1"
+ depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
+ help
+ Say Y or M if you have a PCI sound card utilizing the ESS Technology
+ Solo1 chip. To find out if your sound card uses a
+ Solo1 chip without removing your computer's cover, use
+ lspci -n and look for the PCI ID 125D:1969. This driver
+ differs slightly from OSS/Free, so PLEASE READ
+ <file:Documentation/sound/oss/solo1>.
+
+config SOUND_MAESTRO
+ tristate "ESS Maestro, Maestro2, Maestro2E driver"
+ depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
+ help
+ Say Y or M if you have a sound system driven by ESS's Maestro line
+ of PCI sound chips. These include the Maestro 1, Maestro 2, and
+ Maestro 2E. See <file:Documentation/sound/oss/Maestro> for more
+ details.
+
+config SOUND_MAESTRO3
+ tristate "ESS Maestro3/Allegro driver (EXPERIMENTAL)"
+ depends on SOUND_PRIME && PCI && EXPERIMENTAL && OBSOLETE_OSS_DRIVER
+ help
+ Say Y or M if you have a sound system driven by ESS's Maestro 3
+ PCI sound chip.
+
config SOUND_ICH
tristate "Intel ICH (i8xx) audio support"
depends on SOUND_PRIME && PCI
Support for integral audio in Intel's I/O Controller Hub (ICH)
chipset, as used on the 810/820/840 motherboards.
+config SOUND_HARMONY
+ tristate "PA Harmony audio driver"
+ depends on GSC_LASI && SOUND_PRIME && OBSOLETE_OSS_DRIVER
+ help
+ Say 'Y' or 'M' to include support for Harmony soundchip
+ on HP 712, 715/new and many other GSC based machines.
+
+config SOUND_SONICVIBES
+ tristate "S3 SonicVibes"
+ depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
+ help
+ Say Y or M if you have a PCI sound card utilizing the S3
+ SonicVibes chipset. To find out if your sound card uses a
+ SonicVibes chip without removing your computer's cover, use
+ lspci -n and look for the PCI ID 5333:CA00. This driver
+ differs slightly from OSS/Free, so PLEASE READ
+ <file:Documentation/sound/oss/sonicvibes>.
+
config SOUND_VWSND
tristate "SGI Visual Workstation Sound"
depends on SOUND_PRIME && X86_VISWS
tristate "SGI HAL2 sound (EXPERIMENTAL)"
depends on SOUND_PRIME && SGI_IP22 && EXPERIMENTAL
help
- Say Y or M if you have an SGI Indy or Indigo2 system and want to be able to
- use its on-board A2 audio system.
+ Say Y or M if you have an SGI Indy system and want to be able to
+ use it's on-board A2 audio system.
config SOUND_IT8172
tristate "IT8172G Sound"
integrated, multi-function controller chip for MIPS CPUs. Works
with the AC97 codec.
+config SOUND_AU1000
+ tristate "Au1000 Sound"
+ depends on SOUND_PRIME && (SOC_AU1000 || SOC_AU1100 || SOC_AU1500) && OBSOLETE_OSS_DRIVER
+
config SOUND_AU1550_AC97
- tristate "Au1550/Au1200 AC97 Sound"
- select SND_AC97_CODEC
- depends on SOUND_PRIME && (SOC_AU1550 || SOC_AU1200)
+ tristate "Au1550 AC97 Sound"
+ depends on SOUND_PRIME && SOC_AU1550
config SOUND_TRIDENT
tristate "Trident 4DWave DX/NX, SiS 7018 or ALi 5451 PCI Audio Core"
system support" and "Sysctl support", and after the /proc file
system has been mounted, executing the command
- command what is enabled
+ command what is enabled
echo 0>/proc/ALi5451 pcm out is also set to S/PDIF out. (Default).
config SOUND_VIA82CXXX
tristate "VIA 82C686 Audio Codec"
- depends on SOUND_PRIME && PCI
+ depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
help
Say Y here to include support for the audio codec found on VIA
82Cxxx-based chips. Typically these are built into a motherboard.
config SOUND_AD1816
tristate "AD1816(A) based cards (EXPERIMENTAL)"
- depends on EXPERIMENTAL && SOUND_OSS && OSS_OBSOLETE_DRIVER
+ depends on EXPERIMENTAL && SOUND_OSS
help
Say M here if you have a sound card based on the Analog Devices
AD1816(A) chip.
config SOUND_AD1889
tristate "AD1889 based cards (AD1819 codec) (EXPERIMENTAL)"
- depends on EXPERIMENTAL && SOUND_OSS && PCI && OSS_OBSOLETE_DRIVER
+ depends on EXPERIMENTAL && SOUND_OSS && PCI
help
Say M here if you have a sound card based on the Analog Devices
AD1889 chip.
+config SOUND_SGALAXY
+ tristate "Aztech Sound Galaxy (non-PnP) cards"
+ depends on SOUND_OSS && OBSOLETE_OSS_DRIVER
+ help
+ This module initializes the older non Plug and Play sound galaxy
+ cards from Aztech. It supports the Waverider Pro 32 - 3D and the
+ Galaxy Washington 16.
+
+ If you compile the driver into the kernel, you have to add
+ "sgalaxy=<io>,<irq>,<dma>,<dma2>,<sgbase>" to the kernel command
+ line.
+
config SOUND_ADLIB
tristate "Adlib Cards"
- depends on SOUND_OSS && OSS_OBSOLETE_DRIVER
+ depends on SOUND_OSS
help
Includes ASB 64 4D. Information on programming AdLib cards is
available at <http://www.itsnet.com/home/ldragon/Specs/adlib.html>.
config SOUND_ACI_MIXER
tristate "ACI mixer (miroSOUND PCM1-pro/PCM12/PCM20)"
- depends on SOUND_OSS && OSS_OBSOLETE_DRIVER
+ depends on SOUND_OSS
---help---
ACI (Audio Command Interface) is a protocol used to communicate with
the microcontroller on some sound cards produced by miro and
config SOUND_CS4232
tristate "Crystal CS4232 based (PnP) cards"
- depends on SOUND_OSS
+ depends on SOUND_OSS && OBSOLETE_OSS_DRIVER
help
Say Y here if you have a card based on the Crystal CS4232 chip set,
which uses its own Plug and Play protocol.
"sscape=<io>,<irq>,<dma>,<mpuio>,<mpuirq>" to the kernel command
line.
+config SOUND_GUS
+ tristate "Gravis Ultrasound support"
+ depends on SOUND_OSS && OBSOLETE_OSS_DRIVER
+ help
+ Say Y here for any type of Gravis Ultrasound card, including the GUS
+ or GUS MAX. See also <file:Documentation/sound/oss/ultrasound> for more
+ information on configuring this card with modules.
+
+ If you compile the driver into the kernel, you have to add
+ "gus=<io>,<irq>,<dma>,<dma2>" to the kernel command line.
+
+config SOUND_GUS16
+ bool "16 bit sampling option of GUS (_NOT_ GUS MAX)"
+ depends on SOUND_GUS
+ help
+ Support for Gravis Ulstrasound (GUS) cards (other than the GUS),
+ sampling at 16-bit width.
+
+config SOUND_GUSMAX
+ bool "GUS MAX support"
+ depends on SOUND_GUS
+ help
+ Support for Gravis Ulstrasound MAX.
config SOUND_VMIDI
tristate "Loopback MIDI device support"
config SOUND_NM256
tristate "NM256AV/NM256ZX audio support"
- depends on SOUND_OSS && OSS_OBSOLETE_DRIVER
+ depends on SOUND_OSS && OBSOLETE_OSS_DRIVER
help
Say M here to include audio support for the NeoMagic 256AV/256ZX
chipsets. These are the audio chipsets found in the Sony
See <file:Documentation/sound/oss/NM256> for further information.
+config SOUND_MAD16
+ tristate "OPTi MAD16 and/or Mozart based cards"
+ depends on SOUND_OSS && OBSOLETE_OSS_DRIVER
+ ---help---
+ Answer Y if your card has a Mozart (OAK OTI-601) or MAD16 (OPTi
+ 82C928 or 82C929 or 82C931) audio interface chip. These chips are
+ quite common so it's possible that many no-name cards have one of
+ them. In addition the MAD16 chip is used in some cards made by known
+ manufacturers such as Turtle Beach (Tropez), Reveal (some models)
+ and Diamond (latest ones). Note however that the Tropez sound cards
+ have their own driver; if you have one of those, say N here and Y or
+ M to "Full support for Turtle Beach WaveFront", below.
+
+ If you compile the driver into the kernel, you have to add
+ "mad16=<io>,<irq>,<dma>,<dma2>,<mpuio>,<mpuirq>" to the
+ kernel command line.
+
+ See also <file:Documentation/sound/oss/Opti> and
+ <file:Documentation/sound/oss/MAD16> for more information on setting
+ these cards up as modules.
+
+config MAD16_OLDCARD
+ bool "Support MIDI in older MAD16 based cards (requires SB)"
+ depends on SOUND_MAD16
+ help
+ Answer Y (or M) if you have an older card based on the C928 or
+ Mozart chipset and you want to have MIDI support. If you enable this
+ option you also need to enable support for Sound Blaster.
+
config SOUND_PAS
tristate "ProAudioSpectrum 16 support"
depends on SOUND_OSS
You can say M here to compile this driver as a module; the module is
called sb.
+config SOUND_AWE32_SYNTH
+ tristate "AWE32 synth"
+ depends on SOUND_OSS && OBSOLETE_OSS_DRIVER
+ help
+ Say Y here if you have a Sound Blaster SB32, AWE32-PnP, SB AWE64 or
+ similar sound card. See <file:Documentation/sound/oss/README.awe>,
+ <file:Documentation/sound/oss/AWE32> and the Soundblaster-AWE
+ mini-HOWTO, available from <http://www.tldp.org/docs.html#howto>
+ for more info.
+
+config SOUND_WAVEFRONT
+ tristate "Full support for Turtle Beach WaveFront (Tropez Plus, Tropez, Maui) synth/soundcards"
+ depends on SOUND_OSS && m && OBSOLETE_OSS_DRIVER
+ help
+ Answer Y or M if you have a Tropez Plus, Tropez or Maui sound card
+ and read the files <file:Documentation/sound/oss/Wavefront> and
+ <file:Documentation/sound/oss/Tropez+>.
+
+config SOUND_MAUI
+ tristate "Limited support for Turtle Beach Wave Front (Maui, Tropez) synthesizers"
+ depends on SOUND_OSS && OBSOLETE_OSS_DRIVER
+ help
+ Say Y here if you have a Turtle Beach Wave Front, Maui, or Tropez
+ sound card.
+
+ If you compile the driver into the kernel, you have to add
+ "maui=<io>,<irq>" to the kernel command line.
+
+config MAUI_HAVE_BOOT
+ bool "Have OSWF.MOT firmware file"
+ depends on SOUND_MAUI=y && !STANDALONE
+ help
+ Turtle Beach Maui and Tropez sound cards have a microcontroller
+ which needs to be initialized prior to use. OSWF.MOT is a file
+ distributed with the card's DOS/Windows drivers. Answer Y if you
+ have this file.
+
+config MAUI_BOOT_FILE
+ string "Full pathname of OSWF.MOT firmware file"
+ depends on MAUI_HAVE_BOOT
+ default "/etc/sound/oswf.mot"
+ help
+ Enter the full pathname of your OSWF.MOT file, starting from /.
+
config SOUND_YM3812
tristate "Yamaha FM synthesizer (YM3812/OPL-3) support"
- depends on SOUND_OSS
+ depends on SOUND_OSS && OBSOLETE_OSS_DRIVER
---help---
Answer Y if your card has a FM chip made by Yamaha (OPL2/OPL3/OPL4).
Answering Y is usually a safe and recommended choice, however some
If unsure, say Y.
+config SOUND_OPL3SA1
+ tristate "Yamaha OPL3-SA1 audio controller"
+ depends on SOUND_OSS && OBSOLETE_OSS_DRIVER
+ help
+ Say Y or M if you have a Yamaha OPL3-SA1 sound chip, which is
+ usually built into motherboards. Read
+ <file:Documentation/sound/oss/OPL3-SA> for details.
+
+ If you compile the driver into the kernel, you have to add
+ "opl3sa=<io>,<irq>,<dma>,<dma2>,<mpuio>,<mpuirq>" to the kernel
+ command line.
+
config SOUND_OPL3SA2
tristate "Yamaha OPL3-SA2 and SA3 based PnP cards"
- depends on SOUND_OSS && OSS_OBSOLETE_DRIVER
+ depends on SOUND_OSS
help
Say Y or M if you have a card based on one of these Yamaha sound
chipsets or the "SAx", which is actually a SA3. Read
"opl3sa2=<io>,<irq>,<dma>,<dma2>,<mssio>,<mpuio>" to the kernel
command line.
+config SOUND_YMFPCI
+ tristate "Yamaha YMF7xx PCI audio (native mode)"
+ depends on SOUND_OSS && PCI && OBSOLETE_OSS_DRIVER
+ help
+ Support for Yamaha cards including the YMF711, YMF715, YMF718,
+ YMF719, YMF724, Waveforce 192XG, and Waveforce 192 Digital.
+
+config SOUND_YMFPCI_LEGACY
+ bool "Yamaha PCI legacy ports support"
+ depends on SOUND_YMFPCI
+ help
+ Support for YMF7xx PCI cards emulating an MP401.
+
config SOUND_UART6850
tristate "6850 UART support"
depends on SOUND_OSS
config SOUND_TVMIXER
tristate "TV card (bt848) mixer support"
- depends on SOUND_PRIME && I2C && VIDEO_V4L1
+ depends on SOUND_PRIME && I2C
help
Support for audio mixer facilities on the BT848 TV frame-grabber
card.
tristate "XpressAudio Sound Blaster emulation"
depends on SOUND_SB
+config SOUND_ALI5455
+ tristate "ALi5455 audio support"
+ depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
+
+config SOUND_FORTE
+ tristate "ForteMedia FM801 driver"
+ depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
+ help
+ Say Y or M if you want driver support for the ForteMedia FM801 PCI
+ audio controller (Abit AU10, Genius Sound Maker, HP Workstation
+ zx2000, and others).
+
+config SOUND_RME96XX
+ tristate "RME Hammerfall (RME96XX) support"
+ depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
+ help
+ Say Y or M if you have a Hammerfall or Hammerfall light
+ multichannel card from RME. If you want to access advanced
+ features of the card, read <file:Documentation/sound/oss/rme96xx>.
+
+config SOUND_AD1980
+ tristate "AD1980 front/back switch plugin"
+ depends on SOUND_PRIME && OBSOLETE_OSS_DRIVER
+
config SOUND_SH_DAC_AUDIO
tristate "SuperH DAC audio support"
depends on SOUND_PRIME && CPU_SH3
config SOUND_SH_DAC_AUDIO_CHANNEL
- int "DAC channel"
+ int " DAC channel"
default "1"
depends on SOUND_SH_DAC_AUDIO
git://git.onelab.eu / linux-2.6.git / blobdiff