config SOUND_CMPCI_FM
bool "Enable legacy FM"
- depends on SOUND_CMPCI
+ depends on SOUND_CMPCI && X86
help
- Say Y here to enable the legacy FM (frequency-modulation) synthesis
- support on a card using the CMI8338 or CMI8378 chipset.
+ Say Y here to enable the legacy FM (frequency-modulation) synthesizer
+ support on a card using the CMI8338 or CMI8378 chipset. Even it is
+ enabled, you need to set fmio as proper value to enable it.
Say N here if you don't need this.
-config SOUND_CMPCI_FMIO
- hex "FM I/O 388, 3C8, 3E0, 3E8"
- depends on SOUND_CMPCI_FM
- default "388"
- help
- Set the base I/O address for FM synthesis control on a card using
- the CMI8338 or CMI8378 chipset.
- The default is 388; other choices are 3c8, 3e0, or 3e8.
-
config SOUND_CMPCI_MIDI
bool "Enable legacy MPU-401"
- depends on SOUND_CMPCI
+ depends on SOUND_CMPCI && X86
help
- Say Y here to enable the legacy MP401 MIDI synthesis support on a
- card using the CMI8338 or CMI8378 chipset.
+ Say Y here to enable the legacy MPU401 MIDI synthesizer support on a
+ card using the CMI8338 or CMI8378 chipset. Even it is enabled,
+ you need to set mpuio as proper value to enable it.
Say N here if you don't need this.
-config SOUND_CMPCI_MPUIO
- hex "MPU-401 I/O 330, 320, 310, 300"
- depends on SOUND_CMPCI_MIDI
- default "330"
- help
- Set the base I/O address for MP401 MIDI synthesis control on a card
- using the CMI8338 or CMI8378 chipset.
- The default is 330; other choices are 320, 310, or 300.
-
config SOUND_CMPCI_JOYSTICK
bool "Enable joystick"
- depends on SOUND_CMPCI
- help
- Say here in order to enable the joystick port on a sound crd using
- the CMI8338 or the CMI8738 chipset. Data on these chips are
- available at <http://www.cmedia.com.tw/>.
-
-config SOUND_CMPCI_CM8738
- bool "Support CMI8738 based audio cards"
- depends on SOUND_CMPCI
- help
- Say Y or M if you have a PCI sound card using the CMI8338
- or the CMI8378 chipset. Data on this chip is available at
- <http://www.cmedia.com.tw/doc8738.htm>.
-
- A userspace utility to control some internal registers of these
- chips is available at
- <http://member.nifty.ne.jp/Breeze/softwares/unix/cmictl-e.html>.
-
-config SOUND_CMPCI_SPDIFINVERSE
- bool "Inverse S/PDIF in for CMI8738"
- depends on SOUND_CMPCI_CM8738
+ depends on SOUND_CMPCI && X86
help
- Say Y here to have the driver invert the signal presented on SPDIF IN
- of a card using the CMI8338 or CMI8378 chipset.
+ Say Y here in order to enable the joystick port on a sound card using
+ the CMI8338 or the CMI8738 chipset. You need to config the
+ gameport support and set joystick parameter as 1 to use it.
Say N here if you don't need this.
-config SOUND_CMPCI_SPDIFLOOP
- bool "Enable S/PDIF loop for CMI8738"
- depends on SOUND_CMPCI_CM8738
- help
- Enable loopback from SPDIF in to SPDIF out. For discussion, see
- "The 8738 Audio SPDIF In/Out Technical Data" on the technical
- support page at <http://www.cmedia.com.tw/>.
-
- A userspace utility to control even more internal registers of these
- chips is available at
- <http://member.nifty.ne.jp/Breeze/softwares/unix/cmictl-e.html>.
- This package will among other things help you enable SPDIF
- out/in/loop/monitor.
-
-config SOUND_CMPCI_SPEAKERS
- int "Number of speakers 2, 4, 5, 6"
- depends on SOUND_CMPCI_CM8738
- default "2"
- help
- Specify the number of speaker channels you want the card to drive,
- as an integer.
-
-config SOUND_CMPCI_LINE_REAR
- bool "Use Line-in as Read-out"
- depends on SOUND_CMPCI_CM8738 && SOUND_CMPCI_SPEAKERS!=2
- help
- Say Y here to enable using line-in jack as an output jack for a rear
- speaker. Say N here if you don't need this.
-
-config SOUND_CMPCI_LINE_BASS
- bool "Use Line-in as Bass"
- depends on SOUND_CMPCI_CM8738 && SOUND_CMPCI_SPEAKERS!=2
- help
- Say Y here to enable using line-in jack as an output jack for a bass
- speaker. Say N here if you don't need this.
-
config SOUND_EMU10K1
tristate "Creative SBLive! (EMU10K1)"
depends on SOUND_PRIME!=n && SOUND && PCI
Picture and feature list at
<http://www.pcbroker.com/crystal4281.html>.
+config SOUND_BCM_CS4297A
+ tristate "Crystal Sound CS4297a (for Swarm)"
+ depends on SOUND_PRIME!=n && SIBYTE_SWARM && SOUND
+ help
+ The BCM91250A has a Crystal CS4297a on synchronous serial
+ port B (in addition to the DB-9 serial port). Say Y or M
+ here to enable the sound chip instead of the UART. Also
+ note that CONFIG_KGDB should not be enabled at the same
+ time, since it also attempts to use this UART port.
+
config SOUND_ES1370
tristate "Ensoniq AudioPCI (ES1370)"
- depends on SOUND_PRIME!=n && SOUND && PCI && SOUND_GAMEPORT
+ depends on SOUND_PRIME!=n && SOUND && PCI
help
Say Y or M if you have a PCI sound card utilizing the Ensoniq
ES1370 chipset, such as Ensoniq's AudioPCI (non-97). To find
config SOUND_ES1371
tristate "Creative Ensoniq AudioPCI 97 (ES1371)"
- depends on SOUND_PRIME!=n && SOUND && PCI && SOUND_GAMEPORT
+ depends on SOUND_PRIME!=n && SOUND && PCI
help
Say Y or M if you have a PCI sound card utilizing the Ensoniq
ES1371 chipset, such as Ensoniq's AudioPCI97. To find out if
<file:Documentation/sound/oss/es1371>.
config SOUND_ESSSOLO1
- tristate "ESS Technology Solo1"
- depends on SOUND_PRIME!=n && SOUND && SOUND_GAMEPORT
+ tristate "ESS Technology Solo1"
+ depends on SOUND_PRIME!=n && SOUND && PCI
help
Say Y or M if you have a PCI sound card utilizing the ESS Technology
Solo1 chip. To find out if your sound card uses a
config SOUND_MAESTRO
tristate "ESS Maestro, Maestro2, Maestro2E driver"
- depends on SOUND_PRIME!=n && SOUND
+ depends on SOUND_PRIME!=n && SOUND && PCI
help
Say Y or M if you have a sound system driven by ESS's Maestro line
of PCI sound chips. These include the Maestro 1, Maestro 2, and
config SOUND_HARMONY
tristate "PA Harmony audio driver"
- depends on GSC_LASI && SOUND
+ depends on GSC_LASI && SOUND_PRIME!=n
+ help
+ Say 'Y' or 'M' to include support for Harmony soundchip
+ on HP 712, 715/new and many other GSC based machines.
config SOUND_SONICVIBES
tristate "S3 SonicVibes"
- depends on SOUND_PRIME!=n && SOUND && SOUND_GAMEPORT
+ depends on SOUND_PRIME!=n && SOUND
help
Say Y or M if you have a PCI sound card utilizing the S3
SonicVibes chipset. To find out if your sound card uses a
config SOUND_HAL2
tristate "SGI HAL2 sound (EXPERIMENTAL)"
- depends on SGI_IP22 && SOUND && EXPERIMENTAL
+ depends on SOUND_PRIME!=n && SOUND && SGI_IP22 && EXPERIMENTAL
+ help
+ Say Y or M if you have an SGI Indy system and want to be able to
+ use it's on-board A2 audio system.
+
+config SOUND_IT8172
+ tristate "IT8172G Sound"
+ depends on SOUND_PRIME!=n && (MIPS_ITE8172 || MIPS_IVR) && SOUND
config SOUND_VRC5477
tristate "NEC Vrc5477 AC97 sound"
integrated, multi-function controller chip for MIPS CPUs. Works
with the AC97 codec.
+config SOUND_AU1000
+ tristate "Au1000 Sound"
+ depends on SOUND_PRIME!=n && (SOC_AU1000 || SOC_AU1100 || SOC_AU1500) && SOUND
+
+config SOUND_AU1550_AC97
+ tristate "Au1550 AC97 Sound"
+ depends on SOUND_PRIME!=n && SOC_AU1550 && SOUND
+
config SOUND_TRIDENT
tristate "Trident 4DWave DX/NX, SiS 7018 or ALi 5451 PCI Audio Core"
- depends on SOUND_PRIME!=n && SOUND && SOUND_GAMEPORT
+ depends on SOUND_PRIME!=n && SOUND
---help---
Say Y or M if you have a PCI sound card utilizing the Trident
4DWave-DX/NX chipset or your mother board chipset has SiS 7018
depends on MSNDPIN_NONPNP
default "0"
help
- Iinterrupt request number for the Kurzweil daughterboard
+ Interrupt request number for the Kurzweil daughterboard
synthesizer on MultiSound Pinnacle and Fiji sound cards.
config MSNDPIN_IDE_IO0
config SOUND_AD1889
tristate "AD1889 based cards (AD1819 codec) (EXPERIMENTAL)"
- depends on EXPERIMENTAL && SOUND_OSS
+ depends on EXPERIMENTAL && SOUND_OSS && PCI
help
Say M here if you have a sound card based on the Analog Devices
AD1889 chip.
config SOUND_MAD16
tristate "OPTi MAD16 and/or Mozart based cards"
- depends on SOUND_OSS && SOUND_GAMEPORT
+ depends on SOUND_OSS
---help---
Answer Y if your card has a Mozart (OAK OTI-601) or MAD16 (OPTi
82C928 or 82C929 or 82C931) audio interface chip. These chips are
depends on SOUND_PRIME!=n && PCI
help
Say Y or M if you have a Hammerfall or Hammerfall light
- multichannel card from RME. If you want to acess advanced
- features of the card, read Documentation/sound/oss/rme96xx.
+ multichannel card from RME. If you want to access advanced
+ features of the card, read <file:Documentation/sound/oss/rme96xx>.
config SOUND_AD1980
tristate "AD1980 front/back switch plugin"
git://git.onelab.eu / linux-2.6.git / blobdiff