VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 10
-EXTRAVERSION = -1.14_FC2.1.planetlab
-NAME=AC 1
+EXTRAVERSION = -1.771_FC2.1.planetlab
+NAME=AC
# *DOCUMENTATION*
# To see a list of typical targets execute "make help"
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.10-ac12
-# Tue Feb 15 15:58:28 2005
+# Wed May 18 16:34:48 2005
#
CONFIG_X86=y
CONFIG_MMU=y
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.10-ac12
-# Tue Feb 15 15:58:28 2005
+# Wed May 18 16:34:49 2005
#
CONFIG_X86=y
CONFIG_MMU=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.10-1.14_FC2.1.planetlab.2005.04.14
-# Sat May 7 01:45:01 2005
+# Linux kernel version: 2.6.10-1.771_FC2.1.planetlab
+# Wed May 18 18:00:08 2005
#
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_CKRM_RBCE=y
# CONFIG_CKRM_CRBCE is not set
CONFIG_SYSCTL=y
-CONFIG_AUDIT=y
-CONFIG_AUDITSYSCALL=y
+# CONFIG_AUDIT is not set
CONFIG_LOG_BUF_SHIFT=17
-CONFIG_HOTPLUG=y
+# CONFIG_HOTPLUG is not set
CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
CONFIG_OOM_PANIC=y
# CONFIG_EMBEDDED is not set
# CONFIG_DELAY_ACCT is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_OBSOLETE_MODPARM=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_MODULE_SIG=y
-# CONFIG_MODULE_SIG_FORCE is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_MODULE_SIG is not set
CONFIG_KMOD=y
#
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_HPET_TIMER=y
-# CONFIG_HPET_EMULATE_RTC is not set
# CONFIG_SMP is not set
# CONFIG_PREEMPT is not set
# CONFIG_X86_UP_APIC is not set
CONFIG_HIGHPTE=y
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
-# CONFIG_EFI is not set
CONFIG_REGPARM=y
CONFIG_KERN_PHYS_OFFSET=1
CONFIG_KEXEC=y
#
# Power management options (ACPI, APM)
#
-CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-# CONFIG_SOFTWARE_SUSPEND is not set
+# CONFIG_PM is not set
#
# ACPI (Advanced Configuration and Power Interface) Support
#
-CONFIG_ACPI=y
-CONFIG_ACPI_BOOT=y
-CONFIG_ACPI_INTERPRETER=y
-CONFIG_ACPI_SLEEP=y
-CONFIG_ACPI_SLEEP_PROC_FS=y
-CONFIG_ACPI_AC=m
-CONFIG_ACPI_BATTERY=m
-CONFIG_ACPI_BUTTON=m
-CONFIG_ACPI_VIDEO=m
-CONFIG_ACPI_FAN=y
-CONFIG_ACPI_PROCESSOR=y
-CONFIG_ACPI_THERMAL=y
-CONFIG_ACPI_ASUS=m
-CONFIG_ACPI_IBM=m
-CONFIG_ACPI_TOSHIBA=m
+# CONFIG_ACPI is not set
CONFIG_ACPI_BLACKLIST_YEAR=2001
-# CONFIG_ACPI_DEBUG is not set
-CONFIG_ACPI_BUS=y
-CONFIG_ACPI_EC=y
-CONFIG_ACPI_POWER=y
-CONFIG_ACPI_PCI=y
-CONFIG_ACPI_SYSTEM=y
-CONFIG_X86_PM_TIMER=y
-
-#
-# APM (Advanced Power Management) BIOS Support
-#
-CONFIG_APM=y
-# CONFIG_APM_IGNORE_USER_SUSPEND is not set
-# CONFIG_APM_DO_ENABLE is not set
-CONFIG_APM_CPU_IDLE=y
-# CONFIG_APM_DISPLAY_BLANK is not set
-CONFIG_APM_RTC_IS_GMT=y
-# CONFIG_APM_ALLOW_INTS is not set
-# CONFIG_APM_REAL_MODE_POWER_OFF is not set
#
# CPU Frequency scaling
#
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_DEBUG=y
-# CONFIG_CPU_FREQ_PROC_INTF is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=m
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-# CONFIG_CPU_FREQ_24_API is not set
-CONFIG_CPU_FREQ_GOV_ONDEMAND=m
-CONFIG_CPU_FREQ_TABLE=y
-
-#
-# CPUFreq processor drivers
-#
-CONFIG_X86_ACPI_CPUFREQ=m
-CONFIG_X86_POWERNOW_K6=m
-CONFIG_X86_POWERNOW_K7=y
-CONFIG_X86_POWERNOW_K7_ACPI=y
-CONFIG_X86_POWERNOW_K8=m
-CONFIG_X86_POWERNOW_K8_ACPI=y
-# CONFIG_X86_GX_SUSPMOD is not set
-CONFIG_X86_SPEEDSTEP_CENTRINO=y
-CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI=y
-CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE=y
-CONFIG_X86_SPEEDSTEP_ICH=y
-CONFIG_X86_SPEEDSTEP_SMI=m
-CONFIG_X86_P4_CLOCKMOD=m
-# CONFIG_X86_CPUFREQ_NFORCE2 is not set
-CONFIG_X86_LONGRUN=y
-# CONFIG_X86_LONGHAUL is not set
-
-#
-# shared options
-#
-# CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set
-CONFIG_X86_SPEEDSTEP_LIB=y
-# CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK is not set
+# CONFIG_CPU_FREQ is not set
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
-CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_LEGACY_PROC=y
# CONFIG_PCI_NAMES is not set
-# CONFIG_ISA is not set
+CONFIG_ISA=y
+# CONFIG_EISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-CONFIG_PCCARD=m
-# CONFIG_PCMCIA_DEBUG is not set
-# CONFIG_PCMCIA_OBSOLETE is not set
-CONFIG_PCMCIA=m
-CONFIG_CARDBUS=y
-
-#
-# PC-card bridges
-#
-CONFIG_YENTA=m
-CONFIG_PD6729=m
-CONFIG_I82092=m
-CONFIG_TCIC=m
-
-#
-# PCI Hotplug Support
-#
-CONFIG_HOTPLUG_PCI=y
-# CONFIG_HOTPLUG_PCI_FAKE is not set
-CONFIG_HOTPLUG_PCI_COMPAQ=m
-# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set
-CONFIG_HOTPLUG_PCI_ACPI=m
-CONFIG_HOTPLUG_PCI_ACPI_IBM=m
-# CONFIG_HOTPLUG_PCI_CPCI is not set
-CONFIG_HOTPLUG_PCI_PCIE=m
-# CONFIG_HOTPLUG_PCI_PCIE_POLL_EVENT_MODE is not set
-CONFIG_HOTPLUG_PCI_SHPC=m
-# CONFIG_HOTPLUG_PCI_SHPC_POLL_EVENT_MODE is not set
-
#
# Executable file formats
#
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
# CONFIG_DEBUG_DRIVER is not set
#
# Memory Technology Devices (MTD)
#
-CONFIG_MTD=m
-# CONFIG_MTD_DEBUG is not set
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CONCAT=m
-CONFIG_MTD_REDBOOT_PARTS=m
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=m
-CONFIG_MTD_BLOCK=m
-CONFIG_MTD_BLOCK_RO=m
-CONFIG_FTL=m
-CONFIG_NFTL=m
-CONFIG_NFTL_RW=y
-CONFIG_INFTL=m
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=m
-CONFIG_MTD_JEDECPROBE=m
-CONFIG_MTD_GEN_PROBE=m
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-CONFIG_MTD_CFI_INTELEXT=m
-CONFIG_MTD_CFI_AMDSTD=m
-CONFIG_MTD_CFI_AMDSTD_RETRY=3
-CONFIG_MTD_CFI_STAA=m
-CONFIG_MTD_CFI_UTIL=m
-CONFIG_MTD_RAM=m
-CONFIG_MTD_ROM=m
-CONFIG_MTD_ABSENT=m
-
-#
-# Mapping drivers for chip access
-#
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_PNC2000 is not set
-CONFIG_MTD_SC520CDP=m
-CONFIG_MTD_NETSC520=m
-CONFIG_MTD_TS5500=m
-CONFIG_MTD_SBC_GXX=m
-CONFIG_MTD_ELAN_104NC=m
-CONFIG_MTD_SCx200_DOCFLASH=m
-# CONFIG_MTD_AMD76XROM is not set
-# CONFIG_MTD_ICHXROM is not set
-CONFIG_MTD_SCB2_FLASH=m
-# CONFIG_MTD_NETtel is not set
-# CONFIG_MTD_DILNETPC is not set
-# CONFIG_MTD_L440GX is not set
-CONFIG_MTD_PCI=m
-
-#
-# Self-contained MTD device drivers
-#
-CONFIG_MTD_PMC551=m
-# CONFIG_MTD_PMC551_BUGFIX is not set
-# CONFIG_MTD_PMC551_DEBUG is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-CONFIG_MTD_MTDRAM=m
-CONFIG_MTDRAM_TOTAL_SIZE=4096
-CONFIG_MTDRAM_ERASE_SIZE=128
-# CONFIG_MTD_BLKMTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-CONFIG_MTD_DOC2000=m
-# CONFIG_MTD_DOC2001 is not set
-CONFIG_MTD_DOC2001PLUS=m
-CONFIG_MTD_DOCPROBE=m
-CONFIG_MTD_DOCECC=m
-# CONFIG_MTD_DOCPROBE_ADVANCED is not set
-CONFIG_MTD_DOCPROBE_ADDRESS=0
-
-#
-# NAND Flash Device Drivers
-#
-CONFIG_MTD_NAND=m
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-CONFIG_MTD_NAND_IDS=m
-# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD is not set
#
# Parallel port support
#
-CONFIG_PARPORT=m
-CONFIG_PARPORT_PC=m
-CONFIG_PARPORT_PC_CML1=m
-CONFIG_PARPORT_SERIAL=m
-# CONFIG_PARPORT_PC_FIFO is not set
-# CONFIG_PARPORT_PC_SUPERIO is not set
-CONFIG_PARPORT_PC_PCMCIA=m
-# CONFIG_PARPORT_OTHER is not set
-CONFIG_PARPORT_1284=y
+# CONFIG_PARPORT is not set
#
# Plug and Play support
#
-CONFIG_PNP=y
-# CONFIG_PNP_DEBUG is not set
-
-#
-# Protocols
-#
-CONFIG_PNPACPI=y
+# CONFIG_PNP is not set
#
# Block devices
#
CONFIG_BLK_DEV_FD=m
-CONFIG_PARIDE=m
-CONFIG_PARIDE_PARPORT=m
-
-#
-# Parallel IDE high-level drivers
-#
-CONFIG_PARIDE_PD=m
-CONFIG_PARIDE_PCD=m
-CONFIG_PARIDE_PF=m
-CONFIG_PARIDE_PT=m
-CONFIG_PARIDE_PG=m
-
-#
-# Parallel IDE protocol modules
-#
-CONFIG_PARIDE_ATEN=m
-CONFIG_PARIDE_BPCK=m
-CONFIG_PARIDE_BPCK6=m
-CONFIG_PARIDE_COMM=m
-CONFIG_PARIDE_DSTR=m
-CONFIG_PARIDE_FIT2=m
-CONFIG_PARIDE_FIT3=m
-CONFIG_PARIDE_EPAT=m
-CONFIG_PARIDE_EPATC8=y
-CONFIG_PARIDE_EPIA=m
-CONFIG_PARIDE_FRIQ=m
-CONFIG_PARIDE_FRPW=m
-CONFIG_PARIDE_KBIC=m
-CONFIG_PARIDE_KTTI=m
-CONFIG_PARIDE_ON20=m
-CONFIG_PARIDE_ON26=m
+# CONFIG_BLK_DEV_XD is not set
CONFIG_BLK_CPQ_DA=m
CONFIG_BLK_CPQ_CISS_DA=m
CONFIG_CISS_SCSI_TAPE=y
CONFIG_BLK_DEV_DAC960=m
CONFIG_BLK_DEV_UMEM=m
CONFIG_BLK_DEV_LOOP=m
-CONFIG_BLK_DEV_CRYPTOLOOP=m
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_SX8=m
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_LBD=y
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+# CONFIG_CDROM_PKTCDVD is not set
CONFIG_DISKDUMP=m
#
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
-CONFIG_BLK_DEV_IDECS=m
-CONFIG_BLK_DEV_DELKIN=m
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
CONFIG_BLK_DEV_IDEFLOPPY=y
CONFIG_IDE_GENERIC=y
CONFIG_BLK_DEV_CMD640=y
CONFIG_BLK_DEV_CMD640_ENHANCED=y
-CONFIG_BLK_DEV_IDEPNP=y
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_TRM290 is not set
CONFIG_BLK_DEV_VIA82CXXX=y
# CONFIG_IDE_ARM is not set
+# CONFIG_IDE_CHIPSETS is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
#
CONFIG_BLK_DEV_3W_XXXX_RAID=m
CONFIG_SCSI_3W_9XXX=m
+# CONFIG_SCSI_7000FASST is not set
CONFIG_SCSI_ACARD=m
+CONFIG_SCSI_AHA152X=m
+CONFIG_SCSI_AHA1542=m
CONFIG_SCSI_AACRAID=m
CONFIG_SCSI_AIC7XXX=m
CONFIG_AIC7XXX_CMDS_PER_DEVICE=4
# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
# CONFIG_SCSI_DPT_I2O is not set
CONFIG_SCSI_ADVANSYS=m
+CONFIG_SCSI_IN2000=m
CONFIG_MEGARAID_NEWGEN=y
CONFIG_MEGARAID_MM=m
CONFIG_MEGARAID_MAILBOX=m
CONFIG_SCSI_BUSLOGIC=m
# CONFIG_SCSI_OMIT_FLASHPOINT is not set
# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_PIO is not set
CONFIG_SCSI_FUTURE_DOMAIN=m
CONFIG_SCSI_GDTH=m
+# CONFIG_SCSI_GENERIC_NCR5380 is not set
+# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
CONFIG_SCSI_IPS=m
CONFIG_SCSI_INITIO=m
CONFIG_SCSI_INIA100=m
-CONFIG_SCSI_PPA=m
-CONFIG_SCSI_IMM=m
-# CONFIG_SCSI_IZIP_EPP16 is not set
-# CONFIG_SCSI_IZIP_SLOW_CTR is not set
+# CONFIG_SCSI_NCR53C406A is not set
CONFIG_SCSI_SYM53C8XX_2=m
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_PAS16 is not set
+# CONFIG_SCSI_PSI240I is not set
+CONFIG_SCSI_QLOGIC_FAS=m
CONFIG_SCSI_QLOGIC_ISP=m
# CONFIG_SCSI_QLOGIC_FC is not set
CONFIG_SCSI_QLOGIC_1280=m
CONFIG_SCSI_QLA2322=m
CONFIG_SCSI_QLA6312=m
CONFIG_SCSI_QLA6322=m
+# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC395x is not set
CONFIG_SCSI_DC390T=m
+# CONFIG_SCSI_T128 is not set
+# CONFIG_SCSI_U14_34F is not set
+# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
#
-# PCMCIA SCSI adapter support
+# Old CD-ROM drivers (not SCSI, not IDE)
#
-CONFIG_PCMCIA_AHA152X=m
-CONFIG_PCMCIA_FDOMAIN=m
-CONFIG_PCMCIA_NINJA_SCSI=m
-CONFIG_PCMCIA_QLOGIC=m
-CONFIG_PCMCIA_SYM53C500=m
+# CONFIG_CD_NO_IDESCSI is not set
#
# Multi-device support (RAID and LVM)
#
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-CONFIG_MD_RAID10=m
-CONFIG_MD_RAID5=m
-CONFIG_MD_RAID6=m
-CONFIG_MD_MULTIPATH=m
-CONFIG_MD_FAULTY=m
+CONFIG_MD_LINEAR=y
+# CONFIG_MD_RAID0 is not set
+# CONFIG_MD_RAID1 is not set
+# CONFIG_MD_RAID10 is not set
+# CONFIG_MD_RAID5 is not set
+# CONFIG_MD_RAID6 is not set
+# CONFIG_MD_MULTIPATH is not set
+# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=y
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
+# CONFIG_DM_CRYPT is not set
+# CONFIG_DM_SNAPSHOT is not set
+# CONFIG_DM_MIRROR is not set
+# CONFIG_DM_ZERO is not set
#
# Fusion MPT device support
CONFIG_FUSION=m
CONFIG_FUSION_MAX_SGE=40
CONFIG_FUSION_CTL=m
-CONFIG_FUSION_LAN=m
#
# IEEE 1394 (FireWire) support
#
-CONFIG_IEEE1394=m
-
-#
-# Subsystem Options
-#
-# CONFIG_IEEE1394_VERBOSEDEBUG is not set
-CONFIG_IEEE1394_OUI_DB=y
-CONFIG_IEEE1394_EXTRA_CONFIG_ROMS=y
-CONFIG_IEEE1394_CONFIG_ROM_IP1394=y
-
-#
-# Device Drivers
-#
-CONFIG_IEEE1394_PCILYNX=m
-CONFIG_IEEE1394_OHCI1394=m
-
-#
-# Protocol Drivers
-#
-CONFIG_IEEE1394_VIDEO1394=m
-CONFIG_IEEE1394_SBP2=m
-# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
-CONFIG_IEEE1394_ETH1394=m
-CONFIG_IEEE1394_DV1394=m
-CONFIG_IEEE1394_RAWIO=m
-CONFIG_IEEE1394_CMP=m
-CONFIG_IEEE1394_AMDTP=m
+# CONFIG_IEEE1394 is not set
#
# I2O device support
#
-CONFIG_I2O=m
-CONFIG_I2O_CONFIG=m
-CONFIG_I2O_BLOCK=m
-CONFIG_I2O_SCSI=m
-CONFIG_I2O_PROC=m
+# CONFIG_I2O is not set
#
# Networking support
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
-CONFIG_NETLINK_DEV=y
+# CONFIG_NETLINK_DEV is not set
CONFIG_UNIX=y
-CONFIG_NET_KEY=m
+# CONFIG_NET_KEY is not set
CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_FWMARK=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
-CONFIG_NET_IPIP=m
-CONFIG_NET_IPGRE=m
-CONFIG_NET_IPGRE_BROADCAST=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-CONFIG_INET_TUNNEL=m
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
# CONFIG_ACCEPT_QUEUES is not set
-CONFIG_IP_TCPDIAG=m
+# CONFIG_IP_TCPDIAG is not set
# CONFIG_IP_TCPDIAG_IPV6 is not set
#
# IP: Virtual Server Configuration
#
-CONFIG_IP_VS=m
-# CONFIG_IP_VS_DEBUG is not set
-CONFIG_IP_VS_TAB_BITS=12
-
-#
-# IPVS transport protocol load balancing support
-#
-CONFIG_IP_VS_PROTO_TCP=y
-CONFIG_IP_VS_PROTO_UDP=y
-CONFIG_IP_VS_PROTO_ESP=y
-CONFIG_IP_VS_PROTO_AH=y
-
-#
-# IPVS scheduler
-#
-CONFIG_IP_VS_RR=m
-CONFIG_IP_VS_WRR=m
-CONFIG_IP_VS_LC=m
-CONFIG_IP_VS_WLC=m
-CONFIG_IP_VS_LBLC=m
-CONFIG_IP_VS_LBLCR=m
-CONFIG_IP_VS_DH=m
-CONFIG_IP_VS_SH=m
-CONFIG_IP_VS_SED=m
-CONFIG_IP_VS_NQ=m
-
-#
-# IPVS application helper
-#
-CONFIG_IP_VS_FTP=m
+# CONFIG_IP_VS is not set
CONFIG_ICMP_IPOD=y
# CONFIG_IPV6 is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_BRIDGE_NETFILTER=y
#
# IP: Netfilter Configuration
CONFIG_IP_NF_MATCH_STATE=m
CONFIG_IP_NF_MATCH_CONNTRACK=m
CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_PHYSDEV=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_REALM=m
CONFIG_IP_NF_MATCH_SCTP=m
CONFIG_IP_NF_ARP_MANGLE=m
# CONFIG_IP_NF_COMPAT_IPCHAINS is not set
# CONFIG_IP_NF_COMPAT_IPFWADM is not set
-# CONFIG_IP_NF_CT_PROTO_GRE is not set
-
-#
-# Bridge: Netfilter Configuration
-#
-CONFIG_BRIDGE_NF_EBTABLES=m
-CONFIG_BRIDGE_EBT_BROUTE=m
-CONFIG_BRIDGE_EBT_T_FILTER=m
-CONFIG_BRIDGE_EBT_T_NAT=m
-CONFIG_BRIDGE_EBT_802_3=m
-CONFIG_BRIDGE_EBT_AMONG=m
-CONFIG_BRIDGE_EBT_ARP=m
-CONFIG_BRIDGE_EBT_IP=m
-CONFIG_BRIDGE_EBT_LIMIT=m
-CONFIG_BRIDGE_EBT_MARK=m
-CONFIG_BRIDGE_EBT_PKTTYPE=m
-CONFIG_BRIDGE_EBT_STP=m
-CONFIG_BRIDGE_EBT_VLAN=m
-CONFIG_BRIDGE_EBT_ARPREPLY=m
-CONFIG_BRIDGE_EBT_DNAT=m
-CONFIG_BRIDGE_EBT_MARK_T=m
-CONFIG_BRIDGE_EBT_REDIRECT=m
-CONFIG_BRIDGE_EBT_SNAT=m
-CONFIG_BRIDGE_EBT_LOG=m
+CONFIG_IP_NF_CT_PROTO_GRE=m
+CONFIG_IP_NF_PPTP=m
+CONFIG_IP_NF_NAT_PPTP=m
+CONFIG_IP_NF_NAT_PROTO_GRE=m
CONFIG_VNET=m
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=y
#
# SCTP Configuration (EXPERIMENTAL)
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
-CONFIG_ATM=m
-CONFIG_ATM_CLIP=m
-# CONFIG_ATM_CLIP_NO_ICMP is not set
-CONFIG_ATM_LANE=m
-# CONFIG_ATM_MPOA is not set
-CONFIG_ATM_BR2684=m
-# CONFIG_ATM_BR2684_IPFILTER is not set
-CONFIG_BRIDGE=m
-CONFIG_VLAN_8021Q=m
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
-CONFIG_LLC=m
# CONFIG_LLC2 is not set
-CONFIG_IPX=m
-# CONFIG_IPX_INTERN is not set
-CONFIG_ATALK=m
-CONFIG_DEV_APPLETALK=y
-CONFIG_IPDDP=m
-CONFIG_IPDDP_ENCAP=y
-CONFIG_IPDDP_DECAP=y
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
-CONFIG_NET_DIVERT=y
+# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
-CONFIG_WAN_ROUTER=m
+# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
CONFIG_NET_SCH_CLK_JIFFIES=y
# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
# CONFIG_NET_SCH_CLK_CPU is not set
-CONFIG_NET_SCH_CBQ=m
+# CONFIG_NET_SCH_CBQ is not set
CONFIG_NET_SCH_HTB=m
-CONFIG_NET_SCH_HFSC=m
-CONFIG_NET_SCH_ATM=m
-CONFIG_NET_SCH_PRIO=m
-CONFIG_NET_SCH_RED=m
-CONFIG_NET_SCH_SFQ=m
-CONFIG_NET_SCH_TEQL=m
-CONFIG_NET_SCH_TBF=m
-CONFIG_NET_SCH_GRED=m
-CONFIG_NET_SCH_DSMARK=m
-CONFIG_NET_SCH_NETEM=m
-CONFIG_NET_SCH_INGRESS=m
-CONFIG_NET_QOS=y
-CONFIG_NET_ESTIMATOR=y
+# CONFIG_NET_SCH_HFSC is not set
+# CONFIG_NET_SCH_PRIO is not set
+# CONFIG_NET_SCH_RED is not set
+# CONFIG_NET_SCH_SFQ is not set
+# CONFIG_NET_SCH_TEQL is not set
+# CONFIG_NET_SCH_TBF is not set
+# CONFIG_NET_SCH_GRED is not set
+# CONFIG_NET_SCH_DSMARK is not set
+# CONFIG_NET_SCH_NETEM is not set
+# CONFIG_NET_SCH_INGRESS is not set
+# CONFIG_NET_QOS is not set
CONFIG_NET_CLS=y
-CONFIG_NET_CLS_TCINDEX=m
-CONFIG_NET_CLS_ROUTE4=m
+# CONFIG_NET_CLS_TCINDEX is not set
+# CONFIG_NET_CLS_ROUTE4 is not set
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
-CONFIG_NET_CLS_U32=m
-CONFIG_CLS_U32_PERF=y
-CONFIG_NET_CLS_IND=y
-CONFIG_NET_CLS_RSVP=m
-CONFIG_NET_CLS_RSVP6=m
-# CONFIG_NET_CLS_ACT is not set
-CONFIG_NET_CLS_POLICE=y
+# CONFIG_NET_CLS_U32 is not set
+# CONFIG_NET_CLS_IND is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-CONFIG_NETPOLL_TRAP=y
-CONFIG_NET_POLL_CONTROLLER=y
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_TUX is not set
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
-CONFIG_BONDING=m
-CONFIG_EQUALIZER=m
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
-CONFIG_ETHERTAP=m
-CONFIG_NET_SB1000=m
#
# ARCnet devices
CONFIG_HAPPYMEAL=m
CONFIG_SUNGEM=m
CONFIG_NET_VENDOR_3COM=y
+CONFIG_EL1=m
+CONFIG_EL2=m
+CONFIG_ELPLUS=m
+CONFIG_EL16=m
+CONFIG_EL3=m
+CONFIG_3C515=m
CONFIG_VORTEX=m
CONFIG_TYPHOON=m
+CONFIG_LANCE=m
+CONFIG_NET_VENDOR_SMC=y
+CONFIG_WD80x3=m
+CONFIG_ULTRA=m
+CONFIG_SMC9194=m
+CONFIG_NET_VENDOR_RACAL=y
+# CONFIG_NI5010 is not set
+CONFIG_NI52=m
+CONFIG_NI65=m
#
# Tulip family network device support
CONFIG_DE4X5=m
CONFIG_WINBOND_840=m
CONFIG_DM9102=m
-CONFIG_PCMCIA_XIRCOM=m
-# CONFIG_PCMCIA_XIRTULIP is not set
+# CONFIG_AT1700 is not set
+CONFIG_DEPCA=m
CONFIG_HP100=m
+CONFIG_NET_ISA=y
+# CONFIG_E2100 is not set
+# CONFIG_EWRK3 is not set
+# CONFIG_EEXPRESS is not set
+# CONFIG_EEXPRESS_PRO is not set
+# CONFIG_HPLAN_PLUS is not set
+# CONFIG_HPLAN is not set
+# CONFIG_LP486E is not set
+# CONFIG_ETH16I is not set
+CONFIG_NE2000=m
+# CONFIG_ZNET is not set
+# CONFIG_SEEQ8005 is not set
CONFIG_NET_PCI=y
CONFIG_PCNET32=m
CONFIG_AMD8111_ETH=m
CONFIG_AMD8111E_NAPI=y
CONFIG_ADAPTEC_STARFIRE=m
CONFIG_ADAPTEC_STARFIRE_NAPI=y
+CONFIG_AC3200=m
+CONFIG_APRICOT=m
CONFIG_B44=m
CONFIG_FORCEDETH=m
+CONFIG_CS89x0=m
CONFIG_DGRS=m
CONFIG_EEPRO100=m
# CONFIG_EEPRO100_PIO is not set
CONFIG_TLAN=m
CONFIG_VIA_RHINE=m
CONFIG_VIA_RHINE_MMIO=y
+CONFIG_NET_POCKET=y
+CONFIG_ATP=m
+CONFIG_DE600=m
+CONFIG_DE620=m
#
# Ethernet (1000 Mbit)
#
# Wireless LAN (non-hamradio)
#
-CONFIG_NET_RADIO=y
-
-#
-# Obsolete Wireless cards support (pre-802.11)
-#
-# CONFIG_STRIP is not set
-CONFIG_PCMCIA_WAVELAN=m
-CONFIG_PCMCIA_NETWAVE=m
-
-#
-# Wireless 802.11 Frequency Hopping cards support
-#
-# CONFIG_PCMCIA_RAYCS is not set
-
-#
-# Wireless 802.11b ISA/PCI cards support
-#
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT=m
-CONFIG_IEEE80211_WPA=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
-CONFIG_IPW2100=m
-# CONFIG_IPW_DEBUG is not set
-CONFIG_IPW2100_PROMISC=y
-# CONFIG_IPW2100_LEGACY_FW_LOAD is not set
-CONFIG_IPW2200=m
-CONFIG_HERMES=m
-CONFIG_PLX_HERMES=m
-CONFIG_TMD_HERMES=m
-CONFIG_PCI_HERMES=m
-CONFIG_ATMEL=m
-CONFIG_PCI_ATMEL=m
-
-#
-# Wireless 802.11b Pcmcia/Cardbus cards support
-#
-CONFIG_PCMCIA_HERMES=m
-CONFIG_AIRO_CS=m
-CONFIG_PCMCIA_ATMEL=m
-CONFIG_PCMCIA_WL3501=m
-
-#
-# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
-#
-CONFIG_PRISM54=m
-CONFIG_NET_WIRELESS=y
-
-#
-# PCMCIA network device support
-#
-CONFIG_NET_PCMCIA=y
-CONFIG_PCMCIA_3C589=m
-CONFIG_PCMCIA_3C574=m
-CONFIG_PCMCIA_FMVJ18X=m
-CONFIG_PCMCIA_PCNET=m
-CONFIG_PCMCIA_NMCLAN=m
-CONFIG_PCMCIA_SMC91C92=m
-CONFIG_PCMCIA_XIRC2PS=m
-CONFIG_PCMCIA_AXNET=m
+# CONFIG_NET_RADIO is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
-
-#
-# ATM drivers
-#
-CONFIG_ATM_TCP=m
-CONFIG_ATM_LANAI=m
-CONFIG_ATM_ENI=m
-# CONFIG_ATM_ENI_DEBUG is not set
-# CONFIG_ATM_ENI_TUNE_BURST is not set
-CONFIG_ATM_FIRESTREAM=m
-# CONFIG_ATM_ZATM is not set
-CONFIG_ATM_NICSTAR=m
-# CONFIG_ATM_NICSTAR_USE_SUNI is not set
-# CONFIG_ATM_NICSTAR_USE_IDT77105 is not set
-CONFIG_ATM_IDT77252=m
-# CONFIG_ATM_IDT77252_DEBUG is not set
-# CONFIG_ATM_IDT77252_RCV_ALL is not set
-CONFIG_ATM_IDT77252_USE_SUNI=y
-CONFIG_ATM_AMBASSADOR=m
-# CONFIG_ATM_AMBASSADOR_DEBUG is not set
-CONFIG_ATM_HORIZON=m
-# CONFIG_ATM_HORIZON_DEBUG is not set
-# CONFIG_ATM_IA is not set
-CONFIG_ATM_FORE200E_MAYBE=m
-# CONFIG_ATM_FORE200E_PCA is not set
-CONFIG_ATM_HE=m
-# CONFIG_ATM_HE_USE_SUNI is not set
-CONFIG_FDDI=y
-# CONFIG_DEFXX is not set
-CONFIG_SKFP=m
+# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
-# CONFIG_PLIP is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
-CONFIG_NET_FC=y
+# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
-CONFIG_NETCONSOLE=m
-CONFIG_NETDUMP=m
+# CONFIG_NETCONSOLE is not set
#
# ISDN subsystem
#
-CONFIG_ISDN=m
-
-#
-# Old ISDN4Linux
-#
-CONFIG_ISDN_I4L=m
-CONFIG_ISDN_PPP=y
-CONFIG_ISDN_PPP_VJ=y
-CONFIG_ISDN_MPP=y
-CONFIG_IPPP_FILTER=y
-# CONFIG_ISDN_PPP_BSDCOMP is not set
-CONFIG_ISDN_AUDIO=y
-CONFIG_ISDN_TTY_FAX=y
-
-#
-# ISDN feature submodules
-#
-CONFIG_ISDN_DRV_LOOP=m
-CONFIG_ISDN_DIVERSION=m
-
-#
-# ISDN4Linux hardware drivers
-#
-
-#
-# Passive cards
-#
-CONFIG_ISDN_DRV_HISAX=m
-
-#
-# D-channel protocol features
-#
-CONFIG_HISAX_EURO=y
-CONFIG_DE_AOC=y
-CONFIG_HISAX_NO_SENDCOMPLETE=y
-CONFIG_HISAX_NO_LLC=y
-CONFIG_HISAX_NO_KEYPAD=y
-CONFIG_HISAX_1TR6=y
-CONFIG_HISAX_NI1=y
-CONFIG_HISAX_MAX_CARDS=8
-
-#
-# HiSax supported cards
-#
-CONFIG_HISAX_16_3=y
-CONFIG_HISAX_TELESPCI=y
-CONFIG_HISAX_S0BOX=y
-CONFIG_HISAX_FRITZPCI=y
-CONFIG_HISAX_AVM_A1_PCMCIA=y
-CONFIG_HISAX_ELSA=y
-CONFIG_HISAX_DIEHLDIVA=y
-CONFIG_HISAX_SEDLBAUER=y
-CONFIG_HISAX_NETJET=y
-CONFIG_HISAX_NETJET_U=y
-CONFIG_HISAX_NICCY=y
-CONFIG_HISAX_BKM_A4T=y
-CONFIG_HISAX_SCT_QUADRO=y
-CONFIG_HISAX_GAZEL=y
-CONFIG_HISAX_HFC_PCI=y
-CONFIG_HISAX_W6692=y
-CONFIG_HISAX_HFC_SX=y
-CONFIG_HISAX_ENTERNOW_PCI=y
-# CONFIG_HISAX_DEBUG is not set
-
-#
-# HiSax PCMCIA card service modules
-#
-CONFIG_HISAX_SEDLBAUER_CS=m
-CONFIG_HISAX_ELSA_CS=m
-CONFIG_HISAX_AVM_A1_CS=m
-CONFIG_HISAX_TELES_CS=m
-
-#
-# HiSax sub driver modules
-#
-CONFIG_HISAX_ST5481=m
-CONFIG_HISAX_HFCUSB=m
-CONFIG_HISAX_FRITZ_PCIPNP=m
-CONFIG_HISAX_HDLC=y
-
-#
-# Active cards
-#
-CONFIG_ISDN_DRV_TPAM=m
-CONFIG_HYSDN=m
-CONFIG_HYSDN_CAPI=y
-
-#
-# CAPI subsystem
-#
-CONFIG_ISDN_CAPI=m
-CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
-CONFIG_ISDN_CAPI_MIDDLEWARE=y
-CONFIG_ISDN_CAPI_CAPI20=m
-CONFIG_ISDN_CAPI_CAPIFS_BOOL=y
-CONFIG_ISDN_CAPI_CAPIFS=m
-CONFIG_ISDN_CAPI_CAPIDRV=m
-
-#
-# CAPI hardware drivers
-#
-
-#
-# Active AVM cards
-#
-CONFIG_CAPI_AVM=y
-CONFIG_ISDN_DRV_AVMB1_B1PCI=m
-CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
-CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m
-CONFIG_ISDN_DRV_AVMB1_AVM_CS=m
-CONFIG_ISDN_DRV_AVMB1_T1PCI=m
-CONFIG_ISDN_DRV_AVMB1_C4=m
-
-#
-# Active Eicon DIVA Server cards
-#
-CONFIG_CAPI_EICON=y
-CONFIG_ISDN_DIVAS=m
-CONFIG_ISDN_DIVAS_BRIPCI=y
-CONFIG_ISDN_DIVAS_PRIPCI=y
-CONFIG_ISDN_DIVAS_DIVACAPI=m
-CONFIG_ISDN_DIVAS_USERIDI=m
-CONFIG_ISDN_DIVAS_MAINT=m
+# CONFIG_ISDN is not set
#
# Telephony Support
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-CONFIG_INPUT_JOYDEV=m
+# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
-CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input I/O drivers
#
-CONFIG_GAMEPORT=m
-CONFIG_SOUND_GAMEPORT=m
-CONFIG_GAMEPORT_NS558=m
-CONFIG_GAMEPORT_L4=m
-CONFIG_GAMEPORT_EMU10K1=m
-CONFIG_GAMEPORT_VORTEX=m
-CONFIG_GAMEPORT_FM801=m
-CONFIG_GAMEPORT_CS461X=m
+# CONFIG_GAMEPORT is not set
+CONFIG_SOUND_GAMEPORT=y
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
# CONFIG_SERIO_RAW is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_SERIAL=m
-CONFIG_MOUSE_VSXXXAA=m
-CONFIG_INPUT_JOYSTICK=y
-CONFIG_JOYSTICK_ANALOG=m
-CONFIG_JOYSTICK_A3D=m
-CONFIG_JOYSTICK_ADI=m
-CONFIG_JOYSTICK_COBRA=m
-CONFIG_JOYSTICK_GF2K=m
-CONFIG_JOYSTICK_GRIP=m
-CONFIG_JOYSTICK_GRIP_MP=m
-CONFIG_JOYSTICK_GUILLEMOT=m
-CONFIG_JOYSTICK_INTERACT=m
-CONFIG_JOYSTICK_SIDEWINDER=m
-CONFIG_JOYSTICK_TMDC=m
-CONFIG_JOYSTICK_IFORCE=m
-CONFIG_JOYSTICK_IFORCE_USB=y
-CONFIG_JOYSTICK_IFORCE_232=y
-CONFIG_JOYSTICK_WARRIOR=m
-CONFIG_JOYSTICK_MAGELLAN=m
-CONFIG_JOYSTICK_SPACEORB=m
-CONFIG_JOYSTICK_SPACEBALL=m
-CONFIG_JOYSTICK_STINGER=m
-CONFIG_JOYSTICK_TWIDDLER=m
-CONFIG_JOYSTICK_DB9=m
-CONFIG_JOYSTICK_GAMECON=m
-CONFIG_JOYSTICK_TURBOGRAFX=m
-CONFIG_JOYSTICK_JOYDUMP=m
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_GUNZE=m
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_PCSPKR=m
-CONFIG_INPUT_UINPUT=m
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_INPORT is not set
+# CONFIG_MOUSE_LOGIBM is not set
+# CONFIG_MOUSE_PC110PAD is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
#
# Character devices
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
-CONFIG_SERIAL_NONSTANDARD=y
-# CONFIG_COMPUTONE is not set
-CONFIG_ROCKETPORT=m
-# CONFIG_CYCLADES is not set
-# CONFIG_DIGIEPCA is not set
-# CONFIG_DIGI is not set
-# CONFIG_MOXA_INTELLIO is not set
-# CONFIG_MOXA_SMARTIO is not set
-# CONFIG_ISI is not set
-CONFIG_SYNCLINK=m
-CONFIG_SYNCLINKMP=m
-CONFIG_N_HDLC=m
-# CONFIG_RISCOM8 is not set
-# CONFIG_SPECIALIX is not set
-# CONFIG_SX is not set
-# CONFIG_RIO is not set
-CONFIG_STALDRV=y
-# CONFIG_STALLION is not set
-# CONFIG_ISTALLION is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_CS=m
-# CONFIG_SERIAL_8250_ACPI is not set
CONFIG_SERIAL_8250_NR_UARTS=32
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
-CONFIG_CRASH=m
-CONFIG_PRINTER=m
-CONFIG_LP_CONSOLE=y
-CONFIG_PPDEV=m
-CONFIG_TIPAR=m
+# CONFIG_CRASH is not set
#
# IPMI
#
-CONFIG_IPMI_HANDLER=m
-# CONFIG_IPMI_PANIC_EVENT is not set
-CONFIG_IPMI_DEVICE_INTERFACE=m
-CONFIG_IPMI_SI=m
-CONFIG_IPMI_WATCHDOG=m
-CONFIG_IPMI_POWEROFF=m
+# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-CONFIG_SOFT_WATCHDOG=m
-CONFIG_ACQUIRE_WDT=m
-CONFIG_ADVANTECH_WDT=m
-CONFIG_ALIM1535_WDT=m
-CONFIG_ALIM7101_WDT=m
-CONFIG_SC520_WDT=m
-CONFIG_EUROTECH_WDT=m
-CONFIG_IB700_WDT=m
-CONFIG_WAFER_WDT=m
-CONFIG_I8XX_TCO=m
-CONFIG_SC1200_WDT=m
-# CONFIG_SCx200_WDT is not set
-# CONFIG_60XX_WDT is not set
-CONFIG_CPU5_WDT=m
-CONFIG_W83627HF_WDT=m
-CONFIG_W83877F_WDT=m
-CONFIG_MACHZ_WDT=m
-
-#
-# PCI-based Watchdog Cards
-#
-CONFIG_PCIPCWATCHDOG=m
-CONFIG_WDTPCI=m
-CONFIG_WDT_501_PCI=y
-
-#
-# USB-based Watchdog Cards
-#
-CONFIG_USBPCWATCHDOG=m
-CONFIG_HW_RANDOM=m
-CONFIG_NVRAM=m
-CONFIG_RTC=y
-CONFIG_DTLK=m
-CONFIG_R3964=m
+# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-CONFIG_SONYPI=m
+# CONFIG_SONYPI is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
-CONFIG_AGP=y
-CONFIG_AGP_ALI=y
-CONFIG_AGP_ATI=y
-CONFIG_AGP_AMD=y
-CONFIG_AGP_AMD64=y
-CONFIG_AGP_INTEL=y
-CONFIG_AGP_INTEL_MCH=y
-CONFIG_AGP_NVIDIA=y
-CONFIG_AGP_SIS=y
-CONFIG_AGP_SWORKS=y
-CONFIG_AGP_VIA=y
-CONFIG_AGP_EFFICEON=y
-CONFIG_DRM=y
-CONFIG_DRM_TDFX=m
-CONFIG_DRM_R128=m
-CONFIG_DRM_RADEON=m
-CONFIG_DRM_I810=m
-CONFIG_DRM_I830=m
-CONFIG_DRM_I915=m
-CONFIG_DRM_MGA=m
-CONFIG_DRM_SIS=m
-
-#
-# PCMCIA character devices
-#
-CONFIG_SYNCLINK_CS=m
-CONFIG_MWAVE=m
-CONFIG_RAW_DRIVER=y
-CONFIG_HPET=y
-# CONFIG_HPET_RTC_IRQ is not set
-# CONFIG_HPET_MMAP is not set
-CONFIG_MAX_RAW_DEVS=8192
-CONFIG_HANGCHECK_TIMER=m
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_MWAVE is not set
+# CONFIG_RAW_DRIVER is not set
+CONFIG_HANGCHECK_TIMER=y
#
# I2C support
#
-CONFIG_I2C=m
-CONFIG_I2C_CHARDEV=m
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=m
-CONFIG_I2C_ALGOPCF=m
-CONFIG_I2C_ALGOPCA=m
-
-#
-# I2C Hardware Bus support
-#
-CONFIG_I2C_ALI1535=m
-CONFIG_I2C_ALI1563=m
-CONFIG_I2C_ALI15X3=m
-CONFIG_I2C_AMD756=m
-CONFIG_I2C_AMD756_S4882=m
-CONFIG_I2C_AMD8111=m
-CONFIG_I2C_I801=m
-CONFIG_I2C_I810=m
-CONFIG_I2C_ISA=m
-CONFIG_I2C_NFORCE2=m
-# CONFIG_I2C_PARPORT is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-CONFIG_I2C_PIIX4=m
-CONFIG_I2C_PROSAVAGE=m
-CONFIG_I2C_SAVAGE4=m
-# CONFIG_SCx200_ACB is not set
-CONFIG_I2C_SIS5595=m
-CONFIG_I2C_SIS630=m
-CONFIG_I2C_SIS96X=m
-CONFIG_I2C_STUB=m
-CONFIG_I2C_VIA=m
-CONFIG_I2C_VIAPRO=m
-CONFIG_I2C_VOODOO3=m
-CONFIG_I2C_PCA_ISA=m
-
-#
-# Hardware Sensors Chip support
-#
-CONFIG_I2C_SENSOR=m
-CONFIG_SENSORS_ADM1021=m
-CONFIG_SENSORS_ADM1025=m
-CONFIG_SENSORS_ADM1026=m
-CONFIG_SENSORS_ADM1031=m
-CONFIG_SENSORS_ASB100=m
-CONFIG_SENSORS_DS1621=m
-CONFIG_SENSORS_FSCHER=m
-CONFIG_SENSORS_GL518SM=m
-CONFIG_SENSORS_IT87=m
-CONFIG_SENSORS_LM63=m
-CONFIG_SENSORS_LM75=m
-CONFIG_SENSORS_LM77=m
-CONFIG_SENSORS_LM78=m
-CONFIG_SENSORS_LM80=m
-CONFIG_SENSORS_LM83=m
-CONFIG_SENSORS_LM85=m
-CONFIG_SENSORS_LM87=m
-CONFIG_SENSORS_LM90=m
-CONFIG_SENSORS_MAX1619=m
-CONFIG_SENSORS_PC87360=m
-CONFIG_SENSORS_SMSC47M1=m
-CONFIG_SENSORS_VIA686A=m
-CONFIG_SENSORS_W83781D=m
-CONFIG_SENSORS_W83L785TS=m
-CONFIG_SENSORS_W83627HF=m
-
-#
-# Other I2C Chip support
-#
-CONFIG_SENSORS_EEPROM=m
-CONFIG_SENSORS_PCF8574=m
-CONFIG_SENSORS_PCF8591=m
-CONFIG_SENSORS_RTC8564=m
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_I2C is not set
#
# Dallas's 1-wire bus
#
-CONFIG_W1=m
-CONFIG_W1_MATROX=m
-CONFIG_W1_DS9490=m
-CONFIG_W1_DS9490_BRIDGE=m
-CONFIG_W1_THERM=m
-CONFIG_W1_SMEM=m
+# CONFIG_W1 is not set
#
# Misc devices
#
-CONFIG_IBM_ASM=m
+# CONFIG_IBM_ASM is not set
#
# Multimedia devices
#
-CONFIG_VIDEO_DEV=m
-
-#
-# Video For Linux
-#
-
-#
-# Video Adapters
-#
-CONFIG_VIDEO_BT848=m
-CONFIG_VIDEO_BWQCAM=m
-CONFIG_VIDEO_CQCAM=m
-CONFIG_VIDEO_W9966=m
-CONFIG_VIDEO_CPIA=m
-CONFIG_VIDEO_CPIA_PP=m
-CONFIG_VIDEO_CPIA_USB=m
-CONFIG_VIDEO_SAA5246A=m
-CONFIG_VIDEO_SAA5249=m
-CONFIG_TUNER_3036=m
-CONFIG_VIDEO_STRADIS=m
-CONFIG_VIDEO_ZORAN=m
-CONFIG_VIDEO_ZORAN_BUZ=m
-CONFIG_VIDEO_ZORAN_DC10=m
-CONFIG_VIDEO_ZORAN_DC30=m
-CONFIG_VIDEO_ZORAN_LML33=m
-CONFIG_VIDEO_ZORAN_LML33R10=m
-CONFIG_VIDEO_MEYE=m
-CONFIG_VIDEO_SAA7134=m
-CONFIG_VIDEO_MXB=m
-CONFIG_VIDEO_DPC=m
-CONFIG_VIDEO_HEXIUM_ORION=m
-CONFIG_VIDEO_HEXIUM_GEMINI=m
-CONFIG_VIDEO_CX88=m
-CONFIG_VIDEO_OVCAMCHIP=m
-
-#
-# Radio Adapters
-#
-CONFIG_RADIO_GEMTEK_PCI=m
-CONFIG_RADIO_MAXIRADIO=m
-CONFIG_RADIO_MAESTRO=m
+# CONFIG_VIDEO_DEV is not set
#
# Digital Video Broadcasting Devices
#
-CONFIG_DVB=y
-CONFIG_DVB_CORE=m
-
-#
-# Supported SAA7146 based PCI Adapters
-#
-CONFIG_DVB_AV7110=m
-CONFIG_DVB_AV7110_OSD=y
-CONFIG_DVB_BUDGET=m
-CONFIG_DVB_BUDGET_CI=m
-CONFIG_DVB_BUDGET_AV=m
-CONFIG_DVB_BUDGET_PATCH=m
-
-#
-# Supported USB Adapters
-#
-CONFIG_DVB_TTUSB_BUDGET=m
-CONFIG_DVB_TTUSB_DEC=m
-CONFIG_DVB_DIBUSB=m
-CONFIG_DVB_DIBUSB_MISDESIGNED_DEVICES=y
-# CONFIG_DVB_DIBCOM_DEBUG is not set
-CONFIG_DVB_CINERGYT2=m
-CONFIG_DVB_CINERGYT2_TUNING=y
-CONFIG_DVB_CINERGYT2_STREAM_URB_COUNT=32
-CONFIG_DVB_CINERGYT2_STREAM_BUF_SIZE=512
-CONFIG_DVB_CINERGYT2_QUERY_INTERVAL=250
-CONFIG_DVB_CINERGYT2_ENABLE_RC_INPUT_DEVICE=y
-CONFIG_DVB_CINERGYT2_RC_QUERY_INTERVAL=100
-
-#
-# Supported FlexCopII (B2C2) Adapters
-#
-CONFIG_DVB_B2C2_SKYSTAR=m
-CONFIG_DVB_B2C2_USB=m
-
-#
-# Supported BT878 Adapters
-#
-CONFIG_DVB_BT8XX=m
-
-#
-# Supported DVB Frontends
-#
-
-#
-# Customise DVB Frontends
-#
-
-#
-# DVB-S (satellite) frontends
-#
-CONFIG_DVB_STV0299=m
-CONFIG_DVB_CX24110=m
-CONFIG_DVB_TDA8083=m
-CONFIG_DVB_TDA80XX=m
-CONFIG_DVB_MT312=m
-CONFIG_DVB_VES1X93=m
-
-#
-# DVB-T (terrestrial) frontends
-#
-CONFIG_DVB_SP8870=m
-CONFIG_DVB_SP887X=m
-CONFIG_DVB_CX22700=m
-CONFIG_DVB_CX22702=m
-CONFIG_DVB_L64781=m
-CONFIG_DVB_TDA1004X=m
-CONFIG_DVB_NXT6000=m
-CONFIG_DVB_MT352=m
-CONFIG_DVB_DIB3000MB=m
-CONFIG_DVB_DIB3000MC=m
-
-#
-# DVB-C (cable) frontends
-#
-CONFIG_DVB_ATMEL_AT76C651=m
-CONFIG_DVB_VES1820=m
-CONFIG_DVB_TDA10021=m
-CONFIG_DVB_STV0297=m
-CONFIG_VIDEO_SAA7146=m
-CONFIG_VIDEO_SAA7146_VV=m
-CONFIG_VIDEO_VIDEOBUF=m
-CONFIG_VIDEO_TUNER=m
-CONFIG_VIDEO_BUF=m
-CONFIG_VIDEO_BTCX=m
-CONFIG_VIDEO_IR=m
+# CONFIG_DVB is not set
#
# Graphics support
#
-CONFIG_FB=y
-CONFIG_FB_MODE_HELPERS=y
-CONFIG_FB_TILEBLITTING=y
-CONFIG_FB_CIRRUS=m
-# CONFIG_FB_PM2 is not set
-# CONFIG_FB_CYBER2000 is not set
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_IMSTT is not set
-CONFIG_FB_VGA16=m
-CONFIG_FB_VESA=y
+# CONFIG_FB is not set
CONFIG_VIDEO_SELECT=y
-CONFIG_FB_HGA=m
-CONFIG_FB_HGA_ACCEL=y
-CONFIG_FB_RIVA=m
-# CONFIG_FB_RIVA_I2C is not set
-# CONFIG_FB_RIVA_DEBUG is not set
-CONFIG_FB_I810=m
-CONFIG_FB_I810_GTF=y
-CONFIG_FB_INTEL=m
-# CONFIG_FB_INTEL_DEBUG is not set
-CONFIG_FB_MATROX=m
-CONFIG_FB_MATROX_MILLENIUM=y
-CONFIG_FB_MATROX_MYSTIQUE=y
-CONFIG_FB_MATROX_G450=y
-CONFIG_FB_MATROX_G100=y
-CONFIG_FB_MATROX_I2C=m
-CONFIG_FB_MATROX_MAVEN=m
-CONFIG_FB_MATROX_MULTIHEAD=y
-# CONFIG_FB_RADEON_OLD is not set
-CONFIG_FB_RADEON=m
-CONFIG_FB_RADEON_I2C=y
-# CONFIG_FB_RADEON_DEBUG is not set
-CONFIG_FB_ATY128=m
-CONFIG_FB_ATY=m
-CONFIG_FB_ATY_CT=y
-CONFIG_FB_ATY_GENERIC_LCD=y
-# CONFIG_FB_ATY_XL_INIT is not set
-CONFIG_FB_ATY_GX=y
-CONFIG_FB_SAVAGE=m
-CONFIG_FB_SAVAGE_I2C=m
-CONFIG_FB_SAVAGE_ACCEL=m
-# CONFIG_FB_SIS is not set
-CONFIG_FB_NEOMAGIC=m
-CONFIG_FB_KYRO=m
-CONFIG_FB_3DFX=m
-CONFIG_FB_3DFX_ACCEL=y
-CONFIG_FB_VOODOO1=m
-CONFIG_FB_TRIDENT=m
-CONFIG_FB_TRIDENT_ACCEL=y
-# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
+# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
#
# Sound
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
# USB Device Class drivers
#
# CONFIG_USB_BLUETOOTH_TTY is not set
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=m
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_HID=y
CONFIG_USB_HIDINPUT=y
-CONFIG_HID_FF=y
-CONFIG_HID_PID=y
-CONFIG_LOGITECH_FF=y
-CONFIG_THRUSTMASTER_FF=y
-CONFIG_USB_HIDDEV=y
-CONFIG_USB_AIPTEK=m
-CONFIG_USB_WACOM=m
-CONFIG_USB_KBTAB=m
-CONFIG_USB_POWERMATE=m
-CONFIG_USB_MTOUCH=m
-CONFIG_USB_EGALAX=m
-CONFIG_USB_XPAD=m
-CONFIG_USB_ATI_REMOTE=m
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_MTOUCH is not set
+# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
#
# USB Imaging devices
#
-CONFIG_USB_MDC800=m
-CONFIG_USB_MICROTEK=m
-CONFIG_USB_HPUSBSCSI=m
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+# CONFIG_USB_HPUSBSCSI is not set
#
# USB Multimedia devices
#
-CONFIG_USB_DABUSB=m
-CONFIG_USB_VICAM=m
-CONFIG_USB_DSBR=m
-CONFIG_USB_IBMCAM=m
-CONFIG_USB_KONICAWC=m
-CONFIG_USB_OV511=m
-CONFIG_USB_SE401=m
-CONFIG_USB_SN9C102=m
-CONFIG_USB_STV680=m
-CONFIG_USB_W9968CF=m
-CONFIG_USB_PWC=m
+# CONFIG_USB_DABUSB is not set
+
+#
+# Video4Linux support is needed for USB Multimedia device support
+#
#
# USB Network Adapters
#
# USB port drivers
#
-CONFIG_USB_USS720=m
#
# USB Serial Converter support
#
# USB Miscellaneous drivers
#
-CONFIG_USB_EMI62=m
+# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_TIGL is not set
-CONFIG_USB_AUERSWALD=m
-CONFIG_USB_RIO500=m
-CONFIG_USB_LEGOTOWER=m
-CONFIG_USB_LCD=m
-CONFIG_USB_LED=m
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
# CONFIG_USB_CYTHERM is not set
-CONFIG_USB_PHIDGETKIT=m
-CONFIG_USB_PHIDGETSERVO=m
-CONFIG_USB_TEST=m
+# CONFIG_USB_PHIDGETKIT is not set
+# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_TEST is not set
#
# USB ATM/DSL drivers
#
-CONFIG_USB_ATM=m
-CONFIG_USB_SPEEDTOUCH=m
#
# USB Gadget Support
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT3_FS=m
+CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
-CONFIG_JBD=m
+CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
-CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-CONFIG_REISERFS_PROC_INFO=y
-CONFIG_REISERFS_FS_XATTR=y
-CONFIG_REISERFS_FS_POSIX_ACL=y
-CONFIG_REISERFS_FS_SECURITY=y
-CONFIG_JFS_FS=m
-CONFIG_JFS_POSIX_ACL=y
-# CONFIG_JFS_DEBUG is not set
-# CONFIG_JFS_STATISTICS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
-CONFIG_XFS_FS=m
-# CONFIG_XFS_RT is not set
-CONFIG_XFS_QUOTA=y
-CONFIG_XFS_SECURITY=y
-CONFIG_XFS_POSIX_ACL=y
-CONFIG_MINIX_FS=m
-CONFIG_ROMFS_FS=m
+# CONFIG_XFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
CONFIG_QUOTA=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
-CONFIG_AFFS_FS=m
-CONFIG_HFS_FS=m
-CONFIG_HFSPLUS_FS=m
-CONFIG_BEFS_FS=m
-# CONFIG_BEFS_DEBUG is not set
-CONFIG_BFS_FS=m
-CONFIG_EFS_FS=m
-# CONFIG_JFFS_FS is not set
-CONFIG_JFFS2_FS=m
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_NAND=y
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-CONFIG_CRAMFS=m
-CONFIG_VXFS_FS=m
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
-CONFIG_QNX4FS_FS=m
-# CONFIG_QNX4FS_RW is not set
-CONFIG_SYSV_FS=m
-CONFIG_UFS_FS=m
-# CONFIG_UFS_FS_WRITE is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
#
# Network File Systems
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_RPCSEC_GSS_KRB5=m
-CONFIG_RPCSEC_GSS_SPKM3=m
-CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-CONFIG_CIFS_XATTR=y
-CONFIG_CIFS_POSIX=y
-# CONFIG_CIFS_EXPERIMENTAL is not set
-CONFIG_NCP_FS=m
-CONFIG_NCPFS_PACKET_SIGNING=y
-CONFIG_NCPFS_IOCTL_LOCKING=y
-CONFIG_NCPFS_STRONG=y
-CONFIG_NCPFS_NFS_NS=y
-CONFIG_NCPFS_OS2_NS=y
-CONFIG_NCPFS_SMALLDOS=y
-CONFIG_NCPFS_NLS=y
-CONFIG_NCPFS_EXTRAS=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-CONFIG_OSF_PARTITION=y
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-CONFIG_MAC_PARTITION=y
+# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-CONFIG_BSD_DISKLABEL=y
-CONFIG_MINIX_SUBPARTITION=y
-CONFIG_SOLARIS_X86_PARTITION=y
-CONFIG_UNIXWARE_DISKLABEL=y
-# CONFIG_LDM_PARTITION is not set
-CONFIG_SGI_PARTITION=y
-# CONFIG_ULTRIX_PARTITION is not set
-CONFIG_SUN_PARTITION=y
-CONFIG_EFI_PARTITION=y
#
# Native Language Support
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
#
# Profiling support
#
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
+# CONFIG_PROFILING is not set
#
# Kernel hacking
#
# Security options
#
-CONFIG_KEYS=y
-CONFIG_KEYS_DEBUG_PROC_KEYS=y
-CONFIG_SECURITY=y
-CONFIG_SECURITY_NETWORK=y
-CONFIG_SECURITY_CAPABILITIES=y
-# CONFIG_SECURITY_ROOTPLUG is not set
-# CONFIG_SECURITY_SECLVL is not set
-CONFIG_SECURITY_SELINUX=y
-CONFIG_SECURITY_SELINUX_BOOTPARAM=y
-CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
-CONFIG_SECURITY_SELINUX_DISABLE=y
-CONFIG_SECURITY_SELINUX_DEVELOP=y
-CONFIG_SECURITY_SELINUX_AVC_STATS=y
-# CONFIG_SECURITY_SELINUX_MLS is not set
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_MD4=m
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=m
-CONFIG_CRYPTO_SHA1=y
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
CONFIG_CRYPTO_DES=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES_586=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES_586 is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_TEST is not set
-CONFIG_CRYPTO_SIGNATURE=y
-CONFIG_CRYPTO_SIGNATURE_DSA=y
-CONFIG_CRYPTO_MPILIB=y
+# CONFIG_CRYPTO_SIGNATURE is not set
+# CONFIG_CRYPTO_MPILIB is not set
#
# Library routines
#
CONFIG_CRC_CCITT=m
CONFIG_CRC32=y
-CONFIG_LIBCRC32C=m
+# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_X86_BIOS_REBOOT=y
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.10-ac12
-# Tue Feb 15 15:58:29 2005
+# Wed May 18 16:34:49 2005
#
CONFIG_X86=y
CONFIG_MMU=y
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.10-ac12
-# Tue Feb 15 15:58:29 2005
+# Wed May 18 16:34:50 2005
#
CONFIG_X86=y
CONFIG_MMU=y
__copy_to_user(arg1, arg2, arg3)
#define DRM_GET_USER_UNCHECKED(val, uaddr) \
__get_user(val, uaddr)
-#define DRM_PUT_USER_UNCHECKED(uaddr, val) \
- __put_user(val, uaddr)
-
/** 'malloc' without the overhead of DRM(alloc)() */
#define DRM_MALLOC(x) kmalloc(x, GFP_KERNEL)
} while (0)
-#define OUT_RING_USER_TABLE( tab, sz ) do { \
+#define OUT_RING_TABLE( tab, sz ) do { \
int _size = (sz); \
- int __user *_tab = (tab); \
+ int *_tab = (int *)(tab); \
\
if (write + _size > mask) { \
- int i = (mask+1) - write; \
- if (DRM_COPY_FROM_USER_UNCHECKED( (int *)(ring+write), \
- _tab, i*4 )) \
- return DRM_ERR(EFAULT); \
+ int _i = (mask+1) - write; \
+ _size -= _i; \
+ while (_i > 0 ) { \
+ *(int *)(ring + write) = *_tab++; \
+ write++; \
+ _i--; \
+ } \
write = 0; \
- _size -= i; \
- _tab += i; \
+ _tab += _i; \
} \
\
- if (_size && DRM_COPY_FROM_USER_UNCHECKED( (int *)(ring+write), \
- _tab, _size*4 )) \
- return DRM_ERR(EFAULT); \
- \
- write += _size; \
+ while (_size > 0) { \
+ *(ring + write) = *_tab++; \
+ write++; \
+ _size--; \
+ } \
write &= mask; \
} while (0)
return 0;
}
-static __inline__ int radeon_check_and_fixup_offset_user( drm_radeon_private_t *dev_priv,
- drm_file_t *filp_priv,
- u32 __user *offset ) {
- u32 off;
-
- DRM_GET_USER_UNCHECKED( off, offset );
-
- if ( radeon_check_and_fixup_offset( dev_priv, filp_priv, &off ) )
- return DRM_ERR( EINVAL );
-
- DRM_PUT_USER_UNCHECKED( offset, off );
-
- return 0;
-}
-
static __inline__ int radeon_check_and_fixup_packets( drm_radeon_private_t *dev_priv,
drm_file_t *filp_priv,
int id,
switch ( id ) {
case RADEON_EMIT_PP_MISC:
- if ( radeon_check_and_fixup_offset_user( dev_priv, filp_priv,
- &data[( RADEON_RB3D_DEPTHOFFSET
- - RADEON_PP_MISC ) / 4] ) ) {
+ if ( radeon_check_and_fixup_offset( dev_priv, filp_priv,
+ &data[( RADEON_RB3D_DEPTHOFFSET
+ - RADEON_PP_MISC ) / 4] ) ) {
DRM_ERROR( "Invalid depth buffer offset\n" );
return DRM_ERR( EINVAL );
}
break;
case RADEON_EMIT_PP_CNTL:
- if ( radeon_check_and_fixup_offset_user( dev_priv, filp_priv,
- &data[( RADEON_RB3D_COLOROFFSET
- - RADEON_PP_CNTL ) / 4] ) ) {
+ if ( radeon_check_and_fixup_offset( dev_priv, filp_priv,
+ &data[( RADEON_RB3D_COLOROFFSET
+ - RADEON_PP_CNTL ) / 4] ) ) {
DRM_ERROR( "Invalid colour buffer offset\n" );
return DRM_ERR( EINVAL );
}
case R200_EMIT_PP_TXOFFSET_3:
case R200_EMIT_PP_TXOFFSET_4:
case R200_EMIT_PP_TXOFFSET_5:
- if ( radeon_check_and_fixup_offset_user( dev_priv, filp_priv,
- &data[0] ) ) {
+ if ( radeon_check_and_fixup_offset( dev_priv, filp_priv,
+ &data[0] ) ) {
DRM_ERROR( "Invalid R200 texture offset\n" );
return DRM_ERR( EINVAL );
}
case RADEON_EMIT_PP_TXFILTER_0:
case RADEON_EMIT_PP_TXFILTER_1:
case RADEON_EMIT_PP_TXFILTER_2:
- if ( radeon_check_and_fixup_offset_user( dev_priv, filp_priv,
- &data[( RADEON_PP_TXOFFSET_0
- - RADEON_PP_TXFILTER_0 ) / 4] ) ) {
+ if ( radeon_check_and_fixup_offset( dev_priv, filp_priv,
+ &data[( RADEON_PP_TXOFFSET_0
+ - RADEON_PP_TXFILTER_0 ) / 4] ) ) {
DRM_ERROR( "Invalid R100 texture offset\n" );
return DRM_ERR( EINVAL );
}
case R200_EMIT_PP_CUBIC_OFFSETS_5: {
int i;
for ( i = 0; i < 5; i++ ) {
- if ( radeon_check_and_fixup_offset_user( dev_priv,
- filp_priv,
- &data[i] ) ) {
+ if ( radeon_check_and_fixup_offset( dev_priv, filp_priv,
+ &data[i] ) ) {
DRM_ERROR( "Invalid R200 cubic texture offset\n" );
return DRM_ERR( EINVAL );
}
drm_file_t *filp_priv,
drm_radeon_cmd_buffer_t *cmdbuf,
unsigned int *cmdsz ) {
- u32 tmp[4];
- u32 __user *cmd = (u32 __user *)cmdbuf->buf;
-
- if ( DRM_COPY_FROM_USER_UNCHECKED( tmp, cmd, sizeof( tmp ) ) ) {
- DRM_ERROR( "Failed to copy data from user space\n" );
- return DRM_ERR( EFAULT );
- }
+ u32 *cmd = (u32 *) cmdbuf->buf;
- *cmdsz = 2 + ( ( tmp[0] & RADEON_CP_PACKET_COUNT_MASK ) >> 16 );
+ *cmdsz = 2 + ( ( cmd[0] & RADEON_CP_PACKET_COUNT_MASK ) >> 16 );
- if ( ( tmp[0] & 0xc0000000 ) != RADEON_CP_PACKET3 ) {
+ if ( ( cmd[0] & 0xc0000000 ) != RADEON_CP_PACKET3 ) {
DRM_ERROR( "Not a type 3 packet\n" );
return DRM_ERR( EINVAL );
}
}
/* Check client state and fix it up if necessary */
- if ( tmp[0] & 0x8000 ) { /* MSB of opcode: next DWORD GUI_CNTL */
+ if ( cmd[0] & 0x8000 ) { /* MSB of opcode: next DWORD GUI_CNTL */
u32 offset;
- if ( tmp[1] & ( RADEON_GMC_SRC_PITCH_OFFSET_CNTL
+ if ( cmd[1] & ( RADEON_GMC_SRC_PITCH_OFFSET_CNTL
| RADEON_GMC_DST_PITCH_OFFSET_CNTL ) ) {
- offset = tmp[2] << 10;
+ offset = cmd[2] << 10;
if ( radeon_check_and_fixup_offset( dev_priv, filp_priv, &offset ) ) {
DRM_ERROR( "Invalid first packet offset\n" );
return DRM_ERR( EINVAL );
}
- tmp[2] = ( tmp[2] & 0xffc00000 ) | offset >> 10;
+ cmd[2] = ( cmd[2] & 0xffc00000 ) | offset >> 10;
}
- if ( ( tmp[1] & RADEON_GMC_SRC_PITCH_OFFSET_CNTL ) &&
- ( tmp[1] & RADEON_GMC_DST_PITCH_OFFSET_CNTL ) ) {
- offset = tmp[3] << 10;
+ if ( ( cmd[1] & RADEON_GMC_SRC_PITCH_OFFSET_CNTL ) &&
+ ( cmd[1] & RADEON_GMC_DST_PITCH_OFFSET_CNTL ) ) {
+ offset = cmd[3] << 10;
if ( radeon_check_and_fixup_offset( dev_priv, filp_priv, &offset ) ) {
DRM_ERROR( "Invalid second packet offset\n" );
return DRM_ERR( EINVAL );
}
- tmp[3] = ( tmp[3] & 0xffc00000 ) | offset >> 10;
- }
-
- if ( DRM_COPY_TO_USER_UNCHECKED( cmd, tmp, sizeof( tmp ) ) ) {
- DRM_ERROR( "Failed to copy data to user space\n" );
- return DRM_ERR( EFAULT );
+ cmd[3] = ( cmd[3] & 0xffc00000 ) | offset >> 10;
}
}
{
int id = (int)header.packet.packet_id;
int sz, reg;
- int __user *data = (int __user *)cmdbuf->buf;
+ int *data = (int *)cmdbuf->buf;
RING_LOCALS;
if (id >= RADEON_MAX_STATE_PACKETS)
BEGIN_RING(sz+1);
OUT_RING( CP_PACKET0( reg, (sz-1) ) );
- OUT_RING_USER_TABLE( data, sz );
+ OUT_RING_TABLE( data, sz );
ADVANCE_RING();
cmdbuf->buf += sz * sizeof(int);
drm_radeon_cmd_buffer_t *cmdbuf )
{
int sz = header.scalars.count;
- int __user *data = (int __user *)cmdbuf->buf;
int start = header.scalars.offset;
int stride = header.scalars.stride;
RING_LOCALS;
OUT_RING( CP_PACKET0( RADEON_SE_TCL_SCALAR_INDX_REG, 0 ) );
OUT_RING( start | (stride << RADEON_SCAL_INDX_DWORD_STRIDE_SHIFT));
OUT_RING( CP_PACKET0_TABLE( RADEON_SE_TCL_SCALAR_DATA_REG, sz-1 ) );
- OUT_RING_USER_TABLE( data, sz );
+ OUT_RING_TABLE( cmdbuf->buf, sz );
ADVANCE_RING();
cmdbuf->buf += sz * sizeof(int);
cmdbuf->bufsz -= sz * sizeof(int);
drm_radeon_cmd_buffer_t *cmdbuf )
{
int sz = header.scalars.count;
- int __user *data = (int __user *)cmdbuf->buf;
int start = ((unsigned int)header.scalars.offset) + 0x100;
int stride = header.scalars.stride;
RING_LOCALS;
OUT_RING( CP_PACKET0( RADEON_SE_TCL_SCALAR_INDX_REG, 0 ) );
OUT_RING( start | (stride << RADEON_SCAL_INDX_DWORD_STRIDE_SHIFT));
OUT_RING( CP_PACKET0_TABLE( RADEON_SE_TCL_SCALAR_DATA_REG, sz-1 ) );
- OUT_RING_USER_TABLE( data, sz );
+ OUT_RING_TABLE( cmdbuf->buf, sz );
ADVANCE_RING();
cmdbuf->buf += sz * sizeof(int);
cmdbuf->bufsz -= sz * sizeof(int);
drm_radeon_cmd_buffer_t *cmdbuf )
{
int sz = header.vectors.count;
- int __user *data = (int __user *)cmdbuf->buf;
int start = header.vectors.offset;
int stride = header.vectors.stride;
RING_LOCALS;
OUT_RING( CP_PACKET0( RADEON_SE_TCL_VECTOR_INDX_REG, 0 ) );
OUT_RING( start | (stride << RADEON_VEC_INDX_OCTWORD_STRIDE_SHIFT));
OUT_RING( CP_PACKET0_TABLE( RADEON_SE_TCL_VECTOR_DATA_REG, (sz-1) ) );
- OUT_RING_USER_TABLE( data, sz );
+ OUT_RING_TABLE( cmdbuf->buf, sz );
ADVANCE_RING();
cmdbuf->buf += sz * sizeof(int);
{
drm_radeon_private_t *dev_priv = dev->dev_private;
unsigned int cmdsz;
- int __user *cmd = (int __user *)cmdbuf->buf;
int ret;
RING_LOCALS;
}
BEGIN_RING( cmdsz );
- OUT_RING_USER_TABLE( cmd, cmdsz );
+ OUT_RING_TABLE( cmdbuf->buf, cmdsz );
ADVANCE_RING();
cmdbuf->buf += cmdsz * 4;
drm_radeon_private_t *dev_priv = dev->dev_private;
drm_clip_rect_t box;
unsigned int cmdsz;
- int __user *cmd = (int __user *)cmdbuf->buf;
int ret;
drm_clip_rect_t __user *boxes = cmdbuf->boxes;
int i = 0;
do {
if ( i < cmdbuf->nbox ) {
- if (DRM_COPY_FROM_USER_UNCHECKED( &box, &boxes[i], sizeof(box) ))
+ if (DRM_COPY_FROM_USER( &box, &boxes[i], sizeof(box) ))
return DRM_ERR(EFAULT);
/* FIXME The second and subsequent times round
* this loop, send a WAIT_UNTIL_3D_IDLE before
}
BEGIN_RING( cmdsz );
- OUT_RING_USER_TABLE( cmd, cmdsz );
+ OUT_RING_TABLE( cmdbuf->buf, cmdsz );
ADVANCE_RING();
} while ( ++i < cmdbuf->nbox );
int idx;
drm_radeon_cmd_buffer_t cmdbuf;
drm_radeon_cmd_header_t header;
- int orig_nbox;
+ int orig_nbox, orig_bufsz;
+ char *kbuf=NULL;
LOCK_TEST_WITH_RETURN( dev, filp );
RING_SPACE_TEST_WITH_RETURN( dev_priv );
VB_AGE_TEST_WITH_RETURN( dev_priv );
+ if (cmdbuf.bufsz > 64*1024 || cmdbuf.bufsz<0) {
+ return DRM_ERR(EINVAL);
+ }
- if (DRM_VERIFYAREA_READ( cmdbuf.buf, cmdbuf.bufsz ))
- return DRM_ERR(EFAULT);
-
- if (cmdbuf.nbox &&
- DRM_VERIFYAREA_READ(cmdbuf.boxes,
- cmdbuf.nbox * sizeof(drm_clip_rect_t)))
- return DRM_ERR(EFAULT);
+ /* Allocate an in-kernel area and copy in the cmdbuf. Do this to avoid
+ * races between checking values and using those values in other code,
+ * and simply to avoid a lot of function calls to copy in data.
+ */
+ orig_bufsz = cmdbuf.bufsz;
+ if (orig_bufsz != 0) {
+ kbuf = kmalloc(cmdbuf.bufsz, GFP_KERNEL);
+ if (kbuf == NULL)
+ return DRM_ERR(ENOMEM);
+ if (DRM_COPY_FROM_USER(kbuf, cmdbuf.buf, cmdbuf.bufsz))
+ return DRM_ERR(EFAULT);
+ cmdbuf.buf = kbuf;
+ }
orig_nbox = cmdbuf.nbox;
while ( cmdbuf.bufsz >= sizeof(header) ) {
-
- if (DRM_GET_USER_UNCHECKED( header.i, (int __user *)cmdbuf.buf )) {
- DRM_ERROR("__get_user %p\n", cmdbuf.buf);
- return DRM_ERR(EFAULT);
- }
+ header.i = *(int *)cmdbuf.buf;
cmdbuf.buf += sizeof(header);
cmdbuf.bufsz -= sizeof(header);
DRM_DEBUG("RADEON_CMD_PACKET\n");
if (radeon_emit_packets( dev_priv, filp_priv, header, &cmdbuf )) {
DRM_ERROR("radeon_emit_packets failed\n");
- return DRM_ERR(EINVAL);
+ goto err;
}
break;
DRM_DEBUG("RADEON_CMD_SCALARS\n");
if (radeon_emit_scalars( dev_priv, header, &cmdbuf )) {
DRM_ERROR("radeon_emit_scalars failed\n");
- return DRM_ERR(EINVAL);
+ goto err;
}
break;
DRM_DEBUG("RADEON_CMD_VECTORS\n");
if (radeon_emit_vectors( dev_priv, header, &cmdbuf )) {
DRM_ERROR("radeon_emit_vectors failed\n");
- return DRM_ERR(EINVAL);
+ goto err;
}
break;
if ( idx < 0 || idx >= dma->buf_count ) {
DRM_ERROR( "buffer index %d (of %d max)\n",
idx, dma->buf_count - 1 );
- return DRM_ERR(EINVAL);
+ goto err;
}
buf = dma->buflist[idx];
if ( buf->filp != filp || buf->pending ) {
DRM_ERROR( "bad buffer %p %p %d\n",
buf->filp, filp, buf->pending);
- return DRM_ERR(EINVAL);
+ goto err;
}
radeon_cp_discard_buffer( dev, buf );
DRM_DEBUG("RADEON_CMD_PACKET3\n");
if (radeon_emit_packet3( dev, filp_priv, &cmdbuf )) {
DRM_ERROR("radeon_emit_packet3 failed\n");
- return DRM_ERR(EINVAL);
+ goto err;
}
break;
DRM_DEBUG("RADEON_CMD_PACKET3_CLIP\n");
if (radeon_emit_packet3_cliprect( dev, filp_priv, &cmdbuf, orig_nbox )) {
DRM_ERROR("radeon_emit_packet3_clip failed\n");
- return DRM_ERR(EINVAL);
+ goto err;
}
break;
DRM_DEBUG("RADEON_CMD_SCALARS2\n");
if (radeon_emit_scalars2( dev_priv, header, &cmdbuf )) {
DRM_ERROR("radeon_emit_scalars2 failed\n");
- return DRM_ERR(EINVAL);
+ goto err;
}
break;
DRM_DEBUG("RADEON_CMD_WAIT\n");
if (radeon_emit_wait( dev, header.wait.flags )) {
DRM_ERROR("radeon_emit_wait failed\n");
- return DRM_ERR(EINVAL);
+ goto err;
}
break;
default:
DRM_ERROR("bad cmd_type %d at %p\n",
header.header.cmd_type,
cmdbuf.buf - sizeof(header));
- return DRM_ERR(EINVAL);
+ goto err;
}
}
+ if (orig_bufsz != 0)
+ kfree(kbuf);
DRM_DEBUG("DONE\n");
COMMIT_RING();
return 0;
+
+err:
+ if (orig_bufsz != 0)
+ kfree(kbuf);
+ return DRM_ERR(EINVAL);
}
struct completion event;
int ret;
- bio_get(bio);
-
rw |= (1 << BIO_RW_SYNC);
bio->bi_bdev = bdev;
data += 4;
dlen -= 4;
/* data[0] is code, data[1] is length */
- while (dlen >= 2 && dlen >= data[1]) {
+ while (dlen >= 2 && dlen >= data[1] && data[1] >= 2) {
switch (data[0]) {
case LCP_MRU:
val = (data[2] << 8) + data[3];
size_t len = count;
if (!(tun->flags & TUN_NO_PI)) {
- if ((len -= sizeof(pi)) > len)
+ if ((len -= sizeof(pi)) > count)
return -EINVAL;
if(memcpy_fromiovec((void *)&pi, iv, sizeof(pi)))
if (!txb)
return NULL;
- memset(txb, sizeof(struct ieee80211_txb), 0);
+ memset(txb, 0, sizeof(struct ieee80211_txb));
txb->nr_frags = nr_frags;
txb->frag_size = txb_size;
{"MAXTOR", "XT-4170S", "B5A", BLIST_NOLUN}, /* locks up */
{"MAXTOR", "XT-8760S", "B7B", BLIST_NOLUN}, /* locks up */
{"MEDIAVIS", "RENO CD-ROMX2A", "2.03", BLIST_NOLUN}, /* responds to all lun */
+ {"MICROTEK", "ScanMakerIII", "2.30", BLIST_NOLUN}, /* responds to all lun */
{"NEC", "CD-ROM DRIVE:841", "1.0", BLIST_NOLUN},/* locks up */
{"PHILIPS", "PCA80SC", "V4-2", BLIST_NOLUN}, /* responds to all lun */
{"RODIME", "RO3000S", "2.33", BLIST_NOLUN}, /* locks up */
* otherwise the new scheme is used. If that fails and "use_both_schemes"
* is set, then the driver will make another attempt, using the other scheme.
*/
-static int old_scheme_first = 0;
+static int old_scheme_first = 1;
module_param(old_scheme_first, bool, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(old_scheme_first,
"start with the old device initialization scheme");
static int load_elf_library(struct file *file)
{
struct elf_phdr *elf_phdata;
+ struct elf_phdr *eppnt;
unsigned long elf_bss, bss, len;
int retval, error, i, j;
struct elfhdr elf_ex;
/* j < ELF_MIN_ALIGN because elf_ex.e_phnum <= 2 */
error = -ENOMEM;
- elf_phdata = (struct elf_phdr *) kmalloc(j, GFP_KERNEL);
+ elf_phdata = kmalloc(j, GFP_KERNEL);
if (!elf_phdata)
goto out;
+ eppnt = elf_phdata;
error = -ENOEXEC;
- retval = kernel_read(file, elf_ex.e_phoff, (char *) elf_phdata, j);
+ retval = kernel_read(file, elf_ex.e_phoff, (char *)eppnt, j);
if (retval != j)
goto out_free_ph;
for (j = 0, i = 0; i<elf_ex.e_phnum; i++)
- if ((elf_phdata + i)->p_type == PT_LOAD) j++;
+ if ((eppnt + i)->p_type == PT_LOAD)
+ j++;
if (j != 1)
goto out_free_ph;
- while (elf_phdata->p_type != PT_LOAD) elf_phdata++;
+ while (eppnt->p_type != PT_LOAD)
+ eppnt++;
/* Now use mmap to map the library into memory. */
down_write(¤t->mm->mmap_sem);
error = do_mmap(file,
- ELF_PAGESTART(elf_phdata->p_vaddr),
- (elf_phdata->p_filesz +
- ELF_PAGEOFFSET(elf_phdata->p_vaddr)),
+ ELF_PAGESTART(eppnt->p_vaddr),
+ (eppnt->p_filesz +
+ ELF_PAGEOFFSET(eppnt->p_vaddr)),
PROT_READ | PROT_WRITE | PROT_EXEC,
MAP_FIXED | MAP_PRIVATE | MAP_DENYWRITE,
- (elf_phdata->p_offset -
- ELF_PAGEOFFSET(elf_phdata->p_vaddr)));
+ (eppnt->p_offset -
+ ELF_PAGEOFFSET(eppnt->p_vaddr)));
up_write(¤t->mm->mmap_sem);
- if (error != ELF_PAGESTART(elf_phdata->p_vaddr))
+ if (error != ELF_PAGESTART(eppnt->p_vaddr))
goto out_free_ph;
- elf_bss = elf_phdata->p_vaddr + elf_phdata->p_filesz;
+ elf_bss = eppnt->p_vaddr + eppnt->p_filesz;
padzero(elf_bss);
- len = ELF_PAGESTART(elf_phdata->p_filesz + elf_phdata->p_vaddr + ELF_MIN_ALIGN - 1);
- bss = elf_phdata->p_memsz + elf_phdata->p_vaddr;
+ len = ELF_PAGESTART(eppnt->p_filesz + eppnt->p_vaddr + ELF_MIN_ALIGN - 1);
+ bss = eppnt->p_memsz + eppnt->p_vaddr;
if (bss > len)
do_brk(len, bss - len);
error = 0;
inode->i_data.a_ops = &cramfs_aops;
} else {
inode->i_size = 0;
+ inode->i_blocks = 0;
init_special_inode(inode, inode->i_mode,
old_decode_dev(cramfs_inode->size));
}
return error;
}
+#define MAX_EVENTS (INT_MAX / sizeof(struct epoll_event))
/*
* Implement the event wait interface for the eventpoll file. It is the kernel
current, epfd, events, maxevents, timeout));
/* The maximum number of event must be greater than zero */
- if (maxevents <= 0)
+ if (maxevents <= 0 || maxevents > MAX_EVENTS)
return -EINVAL;
/* Verify that the area passed by the user is writeable */
{
/* buf must be at least sizeof(tsk->comm) in size */
task_lock(tsk);
- memcpy(buf, tsk->comm, sizeof(tsk->comm));
+ strncpy(buf, tsk->comm, sizeof(tsk->comm));
task_unlock(tsk);
}
goto fail;
}
kaddr = kmap_atomic(page, KM_USER0);
+ memset(kaddr, 0, chunk_size);
de = (struct ext2_dir_entry_2 *)kaddr;
de->name_len = 1;
de->rec_len = cpu_to_le16(EXT2_DIR_REC_LEN(1));
sbi->s_log_zone_size = isonum_723 (h_pri->logical_block_size);
sbi->s_max_size = isonum_733(h_pri->volume_space_size);
} else {
+ if (!pri)
+ goto out_freebh;
rootp = (struct iso_directory_record *) pri->root_directory_record;
sbi->s_nzones = isonum_733 (pri->volume_space_size);
sbi->s_log_zone_size = isonum_723 (pri->logical_block_size);
struct inode *inode;
struct isofs_iget5_callback_data data;
+ if (offset >= 1ul << sb->s_blocksize_bits)
+ return NULL;
+
data.block = block;
data.offset = offset;
if(LEN & 1) LEN++; \
CHR = ((unsigned char *) DE) + LEN; \
LEN = *((unsigned char *) DE) - LEN; \
+ if (LEN<0) LEN=0; \
if (ISOFS_SB(inode->i_sb)->s_rock_offset!=-1) \
{ \
LEN-=ISOFS_SB(inode->i_sb)->s_rock_offset; \
offset1 = 0; \
pbh = sb_bread(DEV->i_sb, block); \
if(pbh){ \
+ if (offset > pbh->b_size || offset + cont_size > pbh->b_size){ \
+ brelse(pbh); \
+ goto out; \
+ } \
memcpy(buffer + offset1, pbh->b_data + offset, cont_size - offset1); \
brelse(pbh); \
chr = (unsigned char *) buffer; \
struct rock_ridge * rr;
int sig;
- while (len > 1){ /* There may be one byte for padding somewhere */
+ while (len > 2){ /* There may be one byte for padding somewhere */
rr = (struct rock_ridge *) chr;
- if (rr->len == 0) goto out; /* Something got screwed up here */
+ if (rr->len < 3) goto out; /* Something got screwed up here */
sig = isonum_721(chr);
chr += rr->len;
len -= rr->len;
+ if (len < 0) goto out; /* corrupted isofs */
switch(sig){
case SIG('R','R'):
break;
case SIG('N','M'):
if (truncate) break;
+ if (rr->len < 5) break;
/*
* If the flags are 2 or 4, this indicates '.' or '..'.
* We don't want to do anything with this, because it
struct rock_ridge * rr;
int rootflag;
- while (len > 1){ /* There may be one byte for padding somewhere */
+ while (len > 2){ /* There may be one byte for padding somewhere */
rr = (struct rock_ridge *) chr;
- if (rr->len == 0) goto out; /* Something got screwed up here */
+ if (rr->len < 3) goto out; /* Something got screwed up here */
sig = isonum_721(chr);
chr += rr->len;
len -= rr->len;
+ if (len < 0) goto out; /* corrupted isofs */
switch(sig){
#ifndef CONFIG_ZISOFS /* No flag for SF or ZF */
struct rock_ridge *rr;
if (!ISOFS_SB(inode->i_sb)->s_rock)
- panic ("Cannot have symlink with high sierra variant of iso filesystem\n");
+ goto error;
block = ei->i_iget5_block;
lock_kernel();
SETUP_ROCK_RIDGE(raw_inode, chr, len);
repeat:
- while (len > 1) { /* There may be one byte for padding somewhere */
+ while (len > 2) { /* There may be one byte for padding somewhere */
rr = (struct rock_ridge *) chr;
- if (rr->len == 0)
+ if (rr->len < 3)
goto out; /* Something got screwed up here */
sig = isonum_721(chr);
chr += rr->len;
len -= rr->len;
+ if (len < 0)
+ goto out; /* corrupted isofs */
switch (sig) {
case SIG('R', 'R'):
fail:
brelse(bh);
unlock_kernel();
+ error:
SetPageError(page);
kunmap(page);
unlock_page(page);
/* Fake conntrack entry for untracked connections */
extern struct ip_conntrack ip_conntrack_untracked;
-extern int ip_ct_no_defrag;
/* Returns new sk_buff, or NULL */
struct sk_buff *
-ip_ct_gather_frags(struct sk_buff *skb);
+ip_ct_gather_frags(struct sk_buff *skb, u_int32_t user);
/* Delete all conntracks which match. */
extern void
/*
* Functions provided by ip_fragment.o
*/
-
-struct sk_buff *ip_defrag(struct sk_buff *skb);
-extern void ipfrag_flush(void);
+
+enum ip_defrag_users
+{
+ IP_DEFRAG_LOCAL_DELIVER,
+ IP_DEFRAG_CALL_RA_CHAIN,
+ IP_DEFRAG_CONNTRACK_IN,
+ IP_DEFRAG_CONNTRACK_OUT,
+ IP_DEFRAG_NAT_OUT,
+ IP_DEFRAG_VS_IN,
+ IP_DEFRAG_VS_OUT,
+ IP_DEFRAG_VS_FWD,
+ __IP_DEFRAG_DYNAMIC_FIRST,
+ __IP_DEFRAG_DYNAMIC_LAST = (__IP_DEFRAG_DYNAMIC_FIRST + 32) - 1,
+};
+
+struct sk_buff *ip_defrag(struct sk_buff *skb, u32 user);
+extern int ip_defrag_user_id_alloc(void);
+extern void ip_defrag_user_id_free(int user);
extern int ip_frag_nqueues;
extern atomic_t ip_frag_mem;
address += 4 + PAGE_SIZE - 1;
address &= PAGE_MASK;
grow = (address - vma->vm_end) >> PAGE_SHIFT;
-
- if (address < vma->vm_end) {
+
+ if(address < vma->vm_end) {
anon_vma_unlock(vma);
return 0;
}
+
/* Overcommit.. vx check first to avoid vm_unacct_memory() */
if (!vx_vmpages_avail(vma->vm_mm, grow) ||
security_vm_enough_memory(grow)) {
anon_vma_unlock(vma);
return 0;
}
+
/* Overcommit.. vx check first to avoid vm_unacct_memory() */
if (!vx_vmpages_avail(vma->vm_mm, grow) ||
security_vm_enough_memory(grow)) {
}
-int atm_get_addr(struct atm_dev *dev,struct sockaddr_atmsvc __user *buf,int size)
+int atm_get_addr(struct atm_dev *dev,struct sockaddr_atmsvc __user *buf,size_t size)
{
unsigned long flags;
struct atm_dev_addr *walk;
void atm_reset_addr(struct atm_dev *dev);
int atm_add_addr(struct atm_dev *dev,struct sockaddr_atmsvc *addr);
int atm_del_addr(struct atm_dev *dev,struct sockaddr_atmsvc *addr);
-int atm_get_addr(struct atm_dev *dev,struct sockaddr_atmsvc __user *buf,int size);
+int atm_get_addr(struct atm_dev *dev,struct sockaddr_atmsvc __user *buf,size_t size);
#endif
int bt_sock_register(int proto, struct net_proto_family *ops)
{
- if (proto >= BT_MAX_PROTO)
+ if (proto < 0 || proto >= BT_MAX_PROTO)
return -EINVAL;
if (bt_proto[proto])
int bt_sock_unregister(int proto)
{
- if (proto >= BT_MAX_PROTO)
+ if (proto < 0 || proto >= BT_MAX_PROTO)
return -EINVAL;
if (!bt_proto[proto])
{
int err = 0;
- if (proto >= BT_MAX_PROTO)
+ if (proto < 0 || proto >= BT_MAX_PROTO)
return -EINVAL;
#if defined(CONFIG_KMOD)
struct ipq {
struct ipq *next; /* linked list pointers */
struct list_head lru_list; /* lru list member */
+ u32 user;
u32 saddr;
u32 daddr;
u16 id;
/* Memory limiting on fragments. Evictor trashes the oldest
* fragment queue until we are back under the threshold.
*/
-static void __ip_evictor(int threshold)
+static void ip_evictor(void)
{
struct ipq *qp;
struct list_head *tmp;
int work;
- work = atomic_read(&ip_frag_mem) - threshold;
+ work = atomic_read(&ip_frag_mem) - sysctl_ipfrag_low_thresh;
if (work <= 0)
return;
}
}
-static inline void ip_evictor(void)
-{
- __ip_evictor(sysctl_ipfrag_low_thresh);
-}
-
/*
* Oops, a fragment queue timed out. Kill it and send an ICMP reply.
*/
if(qp->id == qp_in->id &&
qp->saddr == qp_in->saddr &&
qp->daddr == qp_in->daddr &&
- qp->protocol == qp_in->protocol) {
+ qp->protocol == qp_in->protocol &&
+ qp->user == qp_in->user) {
atomic_inc(&qp->refcnt);
write_unlock(&ipfrag_lock);
qp_in->last_in |= COMPLETE;
}
/* Add an entry to the 'ipq' queue for a newly received IP datagram. */
-static struct ipq *ip_frag_create(unsigned hash, struct iphdr *iph)
+static struct ipq *ip_frag_create(unsigned hash, struct iphdr *iph, u32 user)
{
struct ipq *qp;
qp->id = iph->id;
qp->saddr = iph->saddr;
qp->daddr = iph->daddr;
+ qp->user = user;
qp->len = 0;
qp->meat = 0;
qp->fragments = NULL;
/* Find the correct entry in the "incomplete datagrams" queue for
* this IP datagram, and create new one, if nothing is found.
*/
-static inline struct ipq *ip_find(struct iphdr *iph)
+static inline struct ipq *ip_find(struct iphdr *iph, u32 user)
{
__u16 id = iph->id;
__u32 saddr = iph->saddr;
if(qp->id == id &&
qp->saddr == saddr &&
qp->daddr == daddr &&
- qp->protocol == protocol) {
+ qp->protocol == protocol &&
+ qp->user == user) {
atomic_inc(&qp->refcnt);
read_unlock(&ipfrag_lock);
return qp;
}
read_unlock(&ipfrag_lock);
- return ip_frag_create(hash, iph);
+ return ip_frag_create(hash, iph, user);
}
/* Add new segment to existing queue. */
}
/* Process an incoming IP datagram fragment. */
-struct sk_buff *ip_defrag(struct sk_buff *skb)
+struct sk_buff *ip_defrag(struct sk_buff *skb, u32 user)
{
struct iphdr *iph = skb->nh.iph;
struct ipq *qp;
dev = skb->dev;
/* Lookup (or create) queue header */
- if ((qp = ip_find(iph)) != NULL) {
+ if ((qp = ip_find(iph, user)) != NULL) {
struct sk_buff *ret = NULL;
spin_lock(&qp->lock);
return NULL;
}
+static unsigned long ip_defrag_id_bitmap;
+
+int ip_defrag_user_id_alloc(void)
+{
+ int i;
+
+ for (i = 0; i < 32; i++) {
+ if (!test_and_set_bit(i, &ip_defrag_id_bitmap))
+ return i + __IP_DEFRAG_DYNAMIC_FIRST;
+ }
+
+ return -ENFILE;
+}
+EXPORT_SYMBOL(ip_defrag_user_id_alloc);
+
+void ip_defrag_user_id_free(int user)
+{
+ user -= __IP_DEFRAG_DYNAMIC_FIRST;
+ if (user >= 0 && user < 32)
+ clear_bit(user, &ip_defrag_id_bitmap);
+}
+EXPORT_SYMBOL(ip_defrag_user_id_free);
+
void ipfrag_init(void)
{
ipfrag_hash_rnd = (u32) ((num_physpages ^ (num_physpages>>7)) ^
add_timer(&ipfrag_secret_timer);
}
-void ipfrag_flush(void)
-{
- __ip_evictor(0);
-}
-
EXPORT_SYMBOL(ip_defrag);
-EXPORT_SYMBOL(ipfrag_flush);
(!sk->sk_bound_dev_if ||
sk->sk_bound_dev_if == skb->dev->ifindex)) {
if (skb->nh.iph->frag_off & htons(IP_MF|IP_OFFSET)) {
- skb = ip_defrag(skb);
+ skb = ip_defrag(skb, IP_DEFRAG_CALL_RA_CHAIN);
if (skb == NULL) {
read_unlock(&ip_ra_lock);
return 1;
*/
if (skb->nh.iph->frag_off & htons(IP_MF|IP_OFFSET)) {
- skb = ip_defrag(skb);
+ skb = ip_defrag(skb, IP_DEFRAG_LOCAL_DELIVER);
if (!skb)
return 0;
}
to->priority = from->priority;
to->protocol = from->protocol;
to->security = from->security;
+ dst_release(to->dst);
to->dst = dst_clone(from->dst);
to->dev = from->dev;
}
static inline struct sk_buff *
-ip_vs_gather_frags(struct sk_buff *skb)
+ip_vs_gather_frags(struct sk_buff *skb, u_int32_t user)
{
- skb = ip_defrag(skb);
+ skb = ip_defrag(skb, user);
if (skb)
ip_send_check(skb->nh.iph);
return skb;
/* reassemble IP fragments */
if (skb->nh.iph->frag_off & __constant_htons(IP_MF|IP_OFFSET)) {
- skb = ip_vs_gather_frags(skb);
+ skb = ip_vs_gather_frags(skb, IP_DEFRAG_VS_OUT);
if (!skb)
return NF_STOLEN;
*pskb = skb;
/* reassemble IP fragments */
if (unlikely(iph->frag_off & __constant_htons(IP_MF|IP_OFFSET) &&
!pp->dont_defrag)) {
- skb = ip_vs_gather_frags(skb);
+ skb = ip_vs_gather_frags(skb, IP_DEFRAG_VS_OUT);
if (!skb)
return NF_STOLEN;
iph = skb->nh.iph;
* forward to the right destination host if relevant.
* Currently handles error types - unreachable, quench, ttl exceeded.
*/
-static int ip_vs_in_icmp(struct sk_buff **pskb, int *related)
+static int
+ip_vs_in_icmp(struct sk_buff **pskb, int *related, unsigned int hooknum)
{
struct sk_buff *skb = *pskb;
struct iphdr *iph;
/* reassemble IP fragments */
if (skb->nh.iph->frag_off & __constant_htons(IP_MF|IP_OFFSET)) {
- skb = ip_vs_gather_frags(skb);
+ skb = ip_vs_gather_frags(skb,
+ hooknum == NF_IP_LOCAL_IN ?
+ IP_DEFRAG_VS_IN : IP_DEFRAG_VS_FWD);
if (!skb)
return NF_STOLEN;
*pskb = skb;
iph = skb->nh.iph;
if (unlikely(iph->protocol == IPPROTO_ICMP)) {
- int related, verdict = ip_vs_in_icmp(pskb, &related);
+ int related, verdict = ip_vs_in_icmp(pskb, &related, hooknum);
if (related)
return verdict;
if ((*pskb)->nh.iph->protocol != IPPROTO_ICMP)
return NF_ACCEPT;
- return ip_vs_in_icmp(pskb, &r);
+ return ip_vs_in_icmp(pskb, &r, hooknum);
}
}
}
-int ip_ct_no_defrag;
-
/* Returns new sk_buff, or NULL */
struct sk_buff *
-ip_ct_gather_frags(struct sk_buff *skb)
+ip_ct_gather_frags(struct sk_buff *skb, u_int32_t user)
{
struct sock *sk = skb->sk;
#ifdef CONFIG_NETFILTER_DEBUG
unsigned int olddebug = skb->nf_debug;
#endif
- if (unlikely(ip_ct_no_defrag)) {
- kfree_skb(skb);
- return NULL;
- }
-
if (sk) {
sock_hold(sk);
skb_orphan(skb);
}
local_bh_disable();
- skb = ip_defrag(skb);
+ skb = ip_defrag(skb, user);
local_bh_enable();
if (!skb) {
/* Gather fragments. */
if ((*pskb)->nh.iph->frag_off & htons(IP_MF|IP_OFFSET)) {
- *pskb = ip_ct_gather_frags(*pskb);
+ *pskb = ip_ct_gather_frags(*pskb,
+ hooknum == NF_IP_PRE_ROUTING ?
+ IP_DEFRAG_CONNTRACK_IN :
+ IP_DEFRAG_CONNTRACK_OUT);
if (!*pskb)
return NF_STOLEN;
}
cleanup_defraglocalops:
nf_unregister_hook(&ip_conntrack_defrag_local_out_ops);
cleanup_defragops:
- /* Frag queues may hold fragments with skb->dst == NULL */
- ip_ct_no_defrag = 1;
- synchronize_net();
- local_bh_disable();
- ipfrag_flush();
- local_bh_enable();
nf_unregister_hook(&ip_conntrack_defrag_ops);
cleanup_proc_stat:
#ifdef CONFIG_PROC_FS
I'm starting to have nightmares about fragments. */
if ((*pskb)->nh.iph->frag_off & htons(IP_MF|IP_OFFSET)) {
- *pskb = ip_ct_gather_frags(*pskb);
+ *pskb = ip_ct_gather_frags(*pskb, IP_DEFRAG_NAT_OUT);
if (!*pskb)
return NF_STOLEN;
to->priority = from->priority;
to->protocol = from->protocol;
to->security = from->security;
+ dst_release(to->dst);
to->dst = dst_clone(from->dst);
to->dev = from->dev;
%define sublevel 10
%define kversion 2.6.%{sublevel}
%define rpmversion 2.6.%{sublevel}
-%define rhbsys %([ -r /etc/beehive-root ] && echo || echo .`whoami`)
-%define release 1.14_FC2.2.planetlab%{?date:.%{date}}
+%define rhbsys %([ -r /etc/beehive-root -o -n "%{?__beehive_build}" ] && echo || echo .`whoami`)
+
+%define release 1.771_FC2.1.planetlab%{?date:.%{date}}
+
%define signmodules 0
+%define make_target bzImage
%define KVERREL %{PACKAGE_VERSION}-%{PACKAGE_RELEASE}
make -s nonint_oldconfig > /dev/null
make -s include/linux/version.h
- make -s %{?_smp_mflags} bzImage
+ make -s %{?_smp_mflags} %{make_target}
make -s %{?_smp_mflags} modules || exit 1
make buildcheck
# * all script/ files
rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
+ rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/source
mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
+ (cd $RPM_BUILD_ROOT/lib/modules/$KernelVer ; ln -s build source)
# first copy everything
cp --parents `find -type f -name Makefile -o -name "Kconfig*"` $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
cp Module.symvers $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
perl -p -i -e "s/^EXTRAVERSION.*/EXTRAVERSION = -%{release}custom/" $RPM_BUILD_ROOT/usr/src/linux-%{KVERREL}/Makefile
# some config options may be appropriate for an rpm kernel build but are less so for custom user builds,
-# change those to values that are more appropriate as defeault for people who build their own kernel.
+# change those to values that are more appropriate as default for people who build their own kernel.
perl -p -i -e "s/^CONFIG_DEBUG_INFO.*/# CONFIG_DEBUG_INFO is not set/" $RPM_BUILD_ROOT/usr/src/linux-%{KVERREL}/configs/*
perl -p -i -e "s/^.*CONFIG_DEBUG_PAGEALLOC.*/# CONFIG_DEBUG_PAGEALLOC is not set/" $RPM_BUILD_ROOT/usr/src/linux-%{KVERREL}/configs/*
perl -p -i -e "s/^.*CONFIG_DEBUG_SLAB.*/# CONFIG_DEBUG_SLAB is not set/" $RPM_BUILD_ROOT/usr/src/linux-%{KVERREL}/configs/*
cd /lib/modules/%{KVERREL}/build
find . -type f | while read f; do hardlink -c /lib/modules/*/build/$f $f ; done
}
-popd
+popd > /dev/null
fi
# make some useful links
ln -sf initrd-%{KVERREL}.img initrd-boot
ln -sf vmlinuz-%{KVERREL} kernel-boot
}
-popd
+popd > /dev/null
# ask for a reboot
mkdir -p /etc/planetlab
cd /lib/modules/%{KVERREL}smp/build
find . -type f | while read f; do hardlink -c /lib/modules/*/build/$f $f ; done
}
-popd
+popd > /dev/null
fi
-
%preun
/sbin/modprobe loop 2> /dev/null > /dev/null || :
[ -x /sbin/new-kernel-pkg ] && /sbin/new-kernel-pkg --rminitrd --rmmoddep --remove %{KVERREL}
/sbin/modprobe loop 2> /dev/null > /dev/null || :
[ -x /sbin/new-kernel-pkg ] && /sbin/new-kernel-pkg --rminitrd --rmmoddep --remove %{KVERREL}smp
-
###
### file lists
###
%if %{buildup}
%files
%defattr(-,root,root)
-/%{image_install_path}/vmlinuz-%{KVERREL}
+/%{image_install_path}/*-%{KVERREL}
#/boot/Kerntypes-%{KVERREL}
/boot/System.map-%{KVERREL}
/boot/config-%{KVERREL}
%dir /lib/modules/%{KVERREL}
/lib/modules/%{KVERREL}/kernel
%verify(not mtime) /lib/modules/%{KVERREL}/build
-
+/lib/modules/%{KVERREL}/source
%endif
%if %{buildsmp}
%files smp
%defattr(-,root,root)
-/%{image_install_path}/vmlinuz-%{KVERREL}smp
+/%{image_install_path}/*-%{KVERREL}smp
#/boot/Kerntypes-%{KVERREL}smp
/boot/System.map-%{KVERREL}smp
/boot/config-%{KVERREL}smp
%dir /lib/modules/%{KVERREL}smp
/lib/modules/%{KVERREL}smp/kernel
%verify(not mtime) /lib/modules/%{KVERREL}smp/build
-
+/lib/modules/%{KVERREL}smp/source
%endif
%if %{builduml}
# no files
%changelog
-* Thu Feb 17 2005 Marc E. Fiuczynski <mef@cs.princeton.edu>
-- merge to Fedora Core 2 2.6.10-1.14_FC2
-
-* Tue Feb 8 2005 Marc E. Fiuczynski <mef@cs.princeton.edu>
-- merge to Fedora Core 2 2.6.10-1.12_FC2
-
-* Tue Jan 18 2005 Marc E. Fiuczynski <mef@cs.princeton.edu>
-- merge to Fedora Core 2 2.6.9-1.11_FC2
+* Sun Mar 27 2005 Dave Jones <davej@redhat.com>
+- Catch up with all recent security issues.
+ - CAN-2005-0210 : dst leak
+ - CAN-2005-0384 : ppp dos
+ - CAN-2005-0531 : Sign handling issues.
+ - CAN-2005-0400 : EXT2 information leak.
+ - CAN-2005-0449 : Remote oops.
+ - CAN-2005-0736 : Epoll overflow
+ - CAN-2005-0749 : ELF loader may kfree wrong memory.
+ - CAN-2005-0750 : Missing range checking in bluetooth
+ - CAN-2005-0767 : drm race in radeon
+ - CAN-2005-0815 : Corrupt isofs images could cause oops.
-* Thu Sep 16 2004 Mark Huang <mlhuang@cs.princeton.edu>
-- merge to Fedora Core 2 2.6.8-1.521
+* Tue Mar 22 2005 Dave Jones <davej@redhat.com>
+- Fix swapped parameters to memset in ieee802.11 code.
+
+* Thu Feb 24 2005 Dave Jones <davej@redhat.com>
+- Use old scheme first when probing USB. (#145273)
+
+* Wed Feb 23 2005 Dave Jones <davej@redhat.com>
+- Try as you may, there's no escape from crap SCSI hardware. (#149402)
+
+* Mon Feb 21 2005 Dave Jones <davej@redhat.com>
+- Disable some experimental USB EHCI features.
+
+* Tue Feb 15 2005 Dave Jones <davej@redhat.com>
+- Fix bio leak in md layer.
+
+* Wed Feb 9 2005 Dave Jones <davej@redhat.com> [2.6.10-1.766_FC3, 2.6.10-1.14_FC2]
+- Backport some exec-shield fixes from devel/ branch.
+- Scan all SCSI LUNs by default.
+ Theoretically, some devices may hang when being probed, though
+ there should be few enough of these that we can blacklist them
+ instead of having to whitelist every other device on the planet.
+
+* Tue Feb 8 2005 Dave Jones <davej@redhat.com>
+- Use both old-style and new-style for USB initialisation.
+
+* Mon Feb 7 2005 Dave Jones <davej@redhat.com> [2.6.10-1.762_FC3, 2.6.10-1.13_FC2]
+- Update to 2.6.10-ac12
+
+* Tue Feb 1 2005 Dave Jones <davej@redhat.com> [2.6.10-1.760_FC3, 2.6.10-1.12_FC2]
+- Disable longhaul driver, it causes random hangs. (#140873)
+- Fixup NFSv3 oops when mounting with sec=krb5 (#146703)
+
+* Mon Jan 31 2005 Dave Jones <davej@redhat.com>
+- Rebase to 2.6.10-ac11
+
+* Sat Jan 29 2005 Dave Jones <davej@redhat.com>
+- Reintegrate Tux. (#144812)
+
+* Thu Jan 20 2005 Dave Jones <davej@redhat.com> [2.6.10-1.753_FC3, 2.6.10-1.11_FC2]
+- Fix x87 fnsave Tag Word emulation when using FXSR (SSE)
+- Add multi-card reader of the day to the whitelist. (#145587)
+
+* Tue Jan 18 2005 Dave Jones <davej@redhat.com>
+- Reintegrate netdump/netconsole. (#144068)
+
+* Mon Jan 17 2005 Dave Jones <davej@redhat.com>
+- Update to 2.6.10-ac10
+- Revert module loader patch that caused lots of invalid parameter problems.
+- Print more debug info when spinlock code triggers a panic.
+- Print tainted information on various mm debug info.
+
+* Fri Jan 14 2005 Dave Jones <davej@redhat.com>
+- Enable advansys scsi module on x86. (#141004)
+
+* Thu Jan 13 2005 Dave Jones <davej@redhat.com>
+- Reenable CONFIG_PARIDE (#127333)
+
+* Thu Jan 13 2005 Dave Jones <davej@redhat.com> [2.6.10-1.741_FC3, 2.6.10-1.9_FC2]
+- Update to 2.6.10-ac9
+- Fix slab corruption in ACPI video code.
+
+* Mon Jan 10 2005 Dave Jones <davej@redhat.com>
+- Add another Lexar card reader to the whitelist. (#143600)
+- Package asm-m68k for asm-ppc includes. (don't ask). (#144604)
+
+* Mon Jan 10 2005 Dave Jones <davej@redhat.com> [2.6.10-1.737_FC3, 2.6.10-1.8_FC2]
+- Disable slab debugging.
+
+* Sat Jan 8 2005 Dave Jones <davej@redhat.com>
+- Periodic slab debug is incompatable with pagealloc debug.
+ Disable the latter.
+- Update to 2.6.10-ac8
+
+* Fri Jan 7 2005 Dave Jones <davej@redhat.com>
+- Bump up to -ac7
+- Another new card reader.
+
+* Thu Jan 6 2005 Dave Jones <davej@redhat.com>
+- Rebase to 2.6.10-ac5
+
+* Tue Jan 4 2005 Dave Jones <davej@redhat.com>
+- Rebase to 2.6.10-ac4
+- Add periodic slab debug checker.
+
+* Mon Jan 3 2005 Dave Jones <davej@redhat.com>
+- Drop patch which meant we needed a newer gcc. (#144035)
+- Rebase to 2.6.10-ac2
+- Enable SL82C104 IDE driver as built-in on PPC64 (#131033)
+
+* Sat Jan 1 2005 Dave Jones <davej@redhat.com>
+- Fix probing of vesafb. (#125890)
+- Enable PCILynx driver. (#142173)
+
+* Fri Dec 31 2004 Dave Jones <davej@redhat.com>
+- Drop 4g/4g patch completely.
+
+* Tue Dec 28 2004 Dave Jones <davej@redhat.com>
+- Drop bogus ethernet slab cache.
+
+* Thu Dec 23 2004 Dave Jones <davej@redhat.com>
+- Fix bio error propagation.
+- Clear ebp on sysenter return.
+- Extra debugging info on OOM kill.
+- exit() race fix.
+- Fix refcounting order in sd/sr, fixing cable pulls on USB storage.
+- IGMP source filter fixes.
+- Fix ext2/3 leak on umount.
+- fix missing wakeup in ipc/sem
+- Fix another tux corner case bug.
+
+* Wed Dec 22 2004 Dave Jones <davej@redhat.com>
+- Add another ipod to the unusual usb devices list. (#142779)
+
+* Tue Dec 21 2004 Dave Jones <davej@redhat.com>
+- Fix two silly bugs in the AGP posting fixes.
+
+* Thu Dec 16 2004 Dave Jones <davej@redhat.com>
+- Better version of the PCI Posting fixes for agpgart.
+- Add missing cache flush to the AGP code.
+
+* Sun Dec 12 2004 Dave Jones <davej@redhat.com>
+- fix false ECHILD result from wait* with zombie group leader.
+
+* Sat Dec 11 2004 Dave Jones <davej@redhat.com>
+- Workaround broken pci posting in AGPGART.
+- Make sure VC resizing fits in s16.
+
+* Fri Dec 10 2004 Dave Jones <davej@redhat.com>
+- Prevent block device queues from being shared in viocd. (#139018)
+- Libata updates. (#132848, #138405)
+- aacraid: remove aac_handle_aif (#135527)
+- fix uninitialized variable in waitid(2). (#142505)
+- Fix CMSG validation checks wrt. signedness.
+- Fix memory leak in ip_conntrack_ftp
+- [IPV4]: Do not leak IP options.
+- ppc64: Align PACA buffer for hypervisor's use. (#141817)
+- ppc64: Indicate that the veth link is always up. (#135402)
+- ppc64: Quiesce OpenFirmware stdin device at boot. (#142009)
+- SELinux: Fix avc_node_update oops. (#142353)
+- Fix CCISS ioctl return code.
+- Make ppc64's pci_alloc_consistent() conform to documentation. (#140047)
+- Disable tiglusb module. (#142102)
+- E1000 64k-alignment fix. (#140047)
+- Disable tiglusb module. (#142102)
+- ID updates for cciss driver.
+- Fix overflows in USB Edgeport-IO driver. (#142258)
+- Fix wrong TASK_SIZE for 32bit processes on x86-64. (#141737)
+- Fix ext2/ext3 xattr/mbcache race. (#138951)
+- Fix bug where __getblk_slow can loop forever when pages are partially mapped. (#140424)
+- Add missing cache flushes in agpgart code.
+
+* Wed Dec 8 2004 Dave Jones <davej@redhat.com>
+- Enable EDD
+- Enable ETH1394. (#138497)
+- Workaround E1000 post-maturely writing back to TX descriptors. (#133261)
+- Fix the previous E1000 errata workaround.
+- Several IDE fixes from 2.6.9-ac
+- vm pageout throttling. (#133858)
+- Fix Tux from oopsing. (#140918)
+- Fix Tux/SELinux incompatability (#140916)
+- Fix Tux/IPV6 problem. (#140916)
+- ide: Fix possible oops on boot.
+- Make spinlock debugging panic instead of printk.
+- Update Emulex lpfc driver to 8.0.16
+- Selected patches from 2.6.9-ac12
+- ppc64: Fix inability to find space for TCE table (#138844)
+- Fix compat fcntl F_GETLK{,64} (#141680)
+- blkdev_get_blocks(): handle eof
+- Another card reader for the whitelist. (#134094)
+
+* Sat Dec 4 2004 Dave Jones <davej@redhat.com>
+- Enable both old and new megaraid drivers.
+- Add yet another card reader to usb scsi whitelist. (#141367)
+- Fix oops in conntrack on rmmod.
+
+* Fri Dec 3 2004 Dave Jones <davej@redhat.com>
+- Pull in bits of -ac12
+ Should fix the smbfs & visor issues among others.
+
+* Thu Dec 2 2004 Dave Jones <davej@redhat.com>
+- Drop the futex debug patch, it served its purpose.
+- XFRM layer bug fixes
+- ppc64: Convert to using ibm,read-slot-reset-state2 RTAS call
+- ide: Make CSB6 driver support configurations.
+- ide: Handle early EOF on CDs.
+- Fix sx8 device naming in sysfs
+- e100/e1000: return -EINVAL when setting rx-mini or rx-jumbo. (#140793)
+
+* Wed Dec 1 2004 Dave Jones <davej@redhat.com>
+- Disable 4G/4G for i686.
+- Workaround for the E1000 erratum 23 (#140047)
+- Remove bogus futex warning. (#138179)
+- x86_64: Fix lost edge triggered irqs on UP kernel.
+- x86_64: Reenable DRI for MGA.
+- Workaround E1000 post-maturely writing back to TX descriptors (#133261)
+- 3c59x: add EEPROM_RESET for 3c900 Boomerang
+- Fix buffer overrun in arch/x86_64/sys_ia32.c:sys32_ni_syscall()
+- ext3: improves ext3's error logging when we encounter an on-disk corruption.
+- ext3: improves ext3's ability to deal with corruption on-disk
+- ext3: Handle double-delete of indirect blocks.
+- Disable SCB2 flash driver for RHEL4. (#141142)
+
+* Tue Nov 30 2004 Dave Jones <davej@redhat.com>
+- x86_64: add an option to configure oops stack dump
+- x86[64]: display phys_proc_id only when it is initialized
+- x86_64: no TIOCSBRK/TIOCCBRK in ia32 emulation
+- via-rhine: references __init code during resume
+- Add barriers to generic timer code to prevent race. (#128242)
+- ppc64: Add PURR and version data to /proc/ppc64/lparcfg
+- Prevent xtime value becoming incorrect.
+- scsi: return full SCSI status byte in SG_IO
+- Fix show_trace() in irq context with CONFIG_4KSTACKS
+- Adjust alignment of pagevec structure.
+- md: make sure md always uses rdev_dec_pending properly.
+- Make proc_pid_status not dereference dead task structs.
+- sg: Fix oops of sg_cmd_done and sg_release race (#140648)
+- fix bad segment coalescing in blk_recalc_rq_segments()
+- fix missing security_*() check in net/compat.c
+- ia64/x86_64/s390 overlapping vma fix
+- Update Emulex lpfc to 8.0.15
+
+* Mon Nov 29 2004 Dave Jones <davej@redhat.com>
+- Add another card reader to whitelist. (#141022)
+- Fix possible hang in do_wait() (#140042)
+- Fix ps showing wrong ppid. (#132030)
+- Print advice to use -hugemem if >=16GB of memory is detected.
+- Enable ICOM serial driver. (#136150)
+- Enable acpi hotplug driver for IA64.
+- SCSI: fix USB forced remove oops.
+- ia64: add missing sn2 timer mask in time_interpolator code. (#140580)
+- ia64: Fix hang reading /proc/pal/cpu0/tr_info (#139571)
+- ia64: bump number of UARTS. (#139100)
+- Fix ACPI debug level (#141292)
+- Make EDD runtime configurable, and reenable.
+- ppc64: IBM VSCSI driver race fix. (#138725)
+- ppc64: Ensure PPC64 interrupts don't end up hard-disabled. (#139020, #131590)
+- ppc64: Yet more sigsuspend/singlestep fixing. (#140102, #137931)
+- x86-64: Implement ACPI based reset mechanism. (#139104)
+- Backport 2.6.10rc sysfs changes needed for IBM hotplug driver. (#140372)
+- Update Emulex lpfc driver to v8.0.14
+- Optimize away the unconditional write to debug registers on signal delivery path.
+- Fix up scsi_test_unit_ready() to work correctly with CD-ROMs.
+- md: fix two little bugs in raid10
+- Remove incorrect ELF check from module loading. (#140954)
+- Plug leaks in error paths of aic driver.
+- Add refcounting to scsi command allocation.
+- Taint oopses on machine checks, bad_page()'s calls and forced rmmod's.
+- Share Intel cache descriptors between x86 & x86-64.
+- rx checksum support for gige nForce ethernet
+- vm: vm_dirty_ratio initialisation fix
+
+* Mon Nov 29 2004 Soeren Sandmann <sandmann@redhat.com>
+- Build FC-3 kernel in RHEL build root
+
+* Sun Nov 28 2004 Dave Jones <davej@redhat.com>
+- Move 4g/4g kernel into -hugemem.
+
+* Sat Nov 27 2004 Dave Jones <davej@redhat.com>
+- Recognise Shuttle SN85G4 card reader. (#139163)
+
+* Tue Nov 23 2004 Dave Jones <davej@redhat.com>
+- Add futex debug patch.
+
+* Mon Nov 22 2004 Dave Jones <davej@redhat.com>
+- Update -ac patch to 2.6.9-ac11
+- make tulip_stop_rxtx() wait for DMA to fully stop. (#138240)
+- ACPI: Make LEqual less strict about operand types matching.
+- scsi: avoid extra 'put' on devices in __scsi_iterate_device() (#138135)
+- Fix bugs with SOCK_SEQPACKET AF_UNIX sockets
+- Reenable token ring drivers. (#119345)
+- SELinux: Map Unix seqpacket sockets to appropriate security class
+- SELinux: destroy avtab node cache in policy load error path.
+- AF_UNIX: Serialize dgram read using semaphore just like stream.
+- lockd: NLM blocks locks don't sleep
+- NFS lock recovery fixes
+- Add more MODULE_VERSION tags (#136403)
+- Update qlogic driver to 2.6.10rc2 level.
+- cciss: fixes for clustering
+- ieee802.11 update.
+- ipw2100: update to ver 1.0.0
+- ipw2200: update to ver 1.0.0
+- Enable promisc mode on ipw2100
+- 3c59x: reload EEPROM values at rmmod for needy cards
+- ppc64: Prevent sigsuspend stomping on r4 and r5
+- ppc64: Alternative single-step fix.
+- fix for recursive netdump oops on x86_64
+- ia64: Fix IRQ routing fix when booted with maxcpus= (#138236)
+- ia64: search the iommu for the correct size
+- Deal with fraglists correctly on ipv4/ipv6 output
+- Various statm accounting fixes (#139447)
+- Reenable CMM /proc interface for s390 (#137397)
+
+* Fri Nov 19 2004 Dave Jones <davej@redhat.com>
+- e100: fix improper enabling of interrupts. (#139706)
+- autofs4: allow map update recognition
+- Various TCP fixes from 2.6.10rc
+- Various netlink fixes from 2.6.10rc
+- [IPV4]: Do not try to unhash null-netdev nexthops.
+- ppc64: Make NUMA map CPU->node before bringing up the CPU (#128063)
+- ppc64: sched domains / cpu hotplug cleanup. (#128063)
+- ppc64: Add a CPU_DOWN_PREPARE hotplug CPU notifier (#128063)
+- ppc64: Register a cpu hotplug notifier to reinitialize the
+ scheduler domains hierarchy (#128063)
+- ppc64: Introduce CPU_DOWN_FAILED notifier (#128063)
+- ppc64: Make arch_destroy_sched_domains() conditional (#128063)
+- ppc64: Use CPU_DOWN_FAILED notifier in the sched-domains hotplug code (#128063)
+- Various updates to the SCSI midlayer from 2.6.10rc.
+- vlan_dev: return 0 on vlan_dev_change_mtu success. (#139760)
+- Update Emulex lpfc driver to v8013
+- Fix problem with b44 driver and 4g/4g patch. (#118165)
+- Prevent oops when loading aic79xx on machine without hardware. (#125982)
+- Use correct spinlock functions in token ring net code. (#135462)
+- scsi: Add reset ioctl capability to ULDs
+- scsi: update ips driver to 7.10.18
+- Reenable ACPI hotplug driver. (#139976, #140130, #132691)
+
+* Thu Nov 18 2004 Dave Jones <davej@redhat.com>
+- Drop 2.6.9 changes that broke megaraid. (#139723)
+- Update to 2.6.9-ac10, fixing the SATA problems (#139674)
+- Update the OOM-killer tamer to upstream.
+- Implement an RCU scheme for the SELinux AVC
+- Improve on the OOM-killer taming patch.
+- device-mapper: Remove duplicate kfree in dm_register_target error path.
+- Make SHA1 guard against misaligned accesses
+- ASPM workaround for PCIe. (#123360)
+- Hot-plug driver updates due to MSI change (#134290)
+- Workaround for 80332 IOP hot-plug problem (#139041)
+- ExpressCard hot-plug support for ICH6M (#131800)
+- Fix boot crash on VIA systems (noted on x86-64)
+- PPC64: Store correct backtracking info in ppc64 signal frames
+- PPC64: Prevent HVSI from oopsing on hangup (#137912)
+- Fix poor performance b/c of noncacheable mapping in 4g/4g (#130842)
+- Fix PCI-X hotplug issues (#132852, #134290)
+- Re-export force_sig() (#139503)
+- Various fixes for more security issues from latest -ac patch.
+- Fix d_find_alias brokenness (#137791)
+- tg3: Fix fiber hw autoneg bounces (#138738)
+- diskdump: Fix issue with NMI watchdog. (#138041)
+- diskdump: Export disk_dump_state. (#138132)
+- diskdump: Tickle NMI watchdog in diskdump_mdelay() (#138036)
+- diskdump: Fix mem= for x86-64 (#138139)
+- diskdump: Fix missing system_state setting. (#138130)
+- diskdump: Fix diskdump completion message (#138028)
+- Re-add aic host raid support.
+- Take a few more export removal patches from 2.6.10rc
+- SATA: Make AHCI work
+- SATA: Core updates.
+- S390: Fix Incorrect registers in core dumps. (#138206)
+- S390: Fix up lcs device state. (#131167)
+- S390: Fix possible qeth IP registration failure.
+- S390: Support broadcast on z800/z900 HiperSockets
+- S390: Allow FCP port to recover after aborted nameserver request.
+- Flush error in pci_mmcfg_write (#129338)
+- hugetlb_get_unmapped_area fix (#135364, #129525)
+- Fix ia64 cyclone timer on ia64 (#137842, #136684)
+- Fix ipv6 MTU calculation. (#130397)
+- ACPI: Don't display messages about ACPI breakpoints. (#135856)
+- Fix x86_64 copy_user_generic (#135655)
+- lockd: remove hardcoded maximum NLM cookie length
+- Fix SCSI bounce limit
+- Disable polling mode on hotplug controllers in favour of interrupt driven. (#138737)
+
+* Sat Nov 13 2004 Dave Jones <davej@redhat.com>
+- Drop some bogus patches.
+
+* Thu Nov 11 2004 Dave Jones <davej@redhat.com>
+- NFS: Fix dentry refcount accounting error
+- Fix single-stepping on PPC64
+- Integrate kernel-devel changes
+- SELinux: netif fixes.
+- SELinux: add DAC check to setxattr() hook.
+- SELinux: sidtab locking fix.
+- SELinux: mediate send_sigurg().
+- SELinux: fix setscheduler hook deadlock.
+- ide-floppy: Supresses error messages resulting from Medium not present
+- Various IA64 updates from 2.6.10rc1
+- nfsd: make sure getxattr inode op is non-NULL before calling it.
+- Handle NULL dev->dev_addr in SIOCGIFHWADDR correctly. (#137648)
+- Fix NFSD domainname size limit.
+- nfsd4: nfsd oopsed when encountering a conflict with a local lock
+- nfsd4: fix putrootfh return
+- nfsd: Insecure port warning shows decimal IPv4 address
+- Disable sw irqbalance/irqaffinity for e7520/e7320/e7525 (#136419)
+- Fix exec-shield non-PIE/non-prelinked bug
+- ext3 reservations: fix goal hit accounting.
+- Fix problems with non-power-of-two sector size discs. (#135094)
+- Fix possible oops in netpoll (#132153)
+- Add missing MODULE_VERSION tags to various modules. (#136399)
+- Add USB card reader de jour. (#124048)
+- Remove SG_IO deprecation warning (#136179)
+- Make sure that modules get signed with the right key.
+- Remove SG_IO deprecation warning (#136179)
+- s390: Fix fake_ll for qeth device. (#136175)
+- s390: zfcp: Kernel stack frame for zfcp_cfdc_dev_ioctl() is too big
+- s390: Use slab allocator for DASD I/O pages.
+- PPC64: HVSI udbg support
+- PPC64: Make HVSI console survive FSP reset
+- PPC64: Make PCI hostbridge hotplugging work
+- PPC64: Fix IBM VSCSI problems (#138124)
+- Rebase -ac patch to 2.6.9-ac8.
+
+* Wed Nov 3 2004 Dave Jones <davej@redhat.com>
+- Reenable token-ring drivers (#122602)
+
+* Tue Nov 2 2004 Dave Jones <davej@redhat.com>
+- Reenable SLIP. (#124223)
+- Add USB card reader de jour. (#124048)
+
+* Mon Nov 1 2004 Dave Jones <davej@redhat.com>
+- Fix memory leak on x86-64 in mixed 32/64 mode. (#132947)
+- Yet another USB card reader for the whitelist. (#137722)
+
+* Fri Oct 29 2004 Dave Jones <davej@redhat.com>
+- Fix raid5 oops (#127862)
+- Stop E820 BIOS entries being corrupted by EDID info. (#137510)
+
+* Thu Oct 28 2004 Dave Jones <davej@redhat.com>
+- Remove the possibility of some false OOM kills. (#131251)
+- Add more USB card readers to SCSI whitelist (#131546)
+- Disable CONFIG_SCHED_SMT for iseries.
+
+* Wed Oct 27 2004 Dave Jones <davej@redhat.com>
+- Reenable ISA NIC support (#136569)
+
+* Tue Oct 26 2004 Dave Jones <davej@redhat.com>
+- Reenable Initio 9100U(W) SCSI driver. (#137153)
+
+* Mon Oct 25 2004 Dave Jones <davej@redhat.com>
+- Add another USB card reader to SCSI whitelist (#132923)
+
+* Fri Oct 22 2004 Dave Jones <davej@redhat.com>
+- Fix PPC NUMA (#130716).
+- Fix autoraid for S390 (#123842/#130339)
+- Selected bits from 2.6.9-ac3
+ - Fix syncppp/async ppp problems with new hangup
+ - Fix broken parport_pc unload
+ - Stop i8xx_tco making some boxes reboot on load
+ - Fix cpia/module tools deadlock
+ - Security fix for smbfs leak/overrun
+
+* Thu Oct 21 2004 Dave Jones <davej@redhat.com>
+- Misc security fixes from 2.6.9-ac2
+
+* Wed Oct 20 2004 Dave Jones <davej@redhat.com>
+- Fix ia64 module loading. (#136365)
+- Enable discontigmem for PPC64
+- Disable a bunch of useless PPC config options
+- Enable PACK_STACK on s390.
+
+* Tue Oct 19 2004 Dave Jones <davej@redhat.com>
+- Fix NFS badness (#132726)
+- Drop bogus USB workaround. (#131127)
+
+* Mon Oct 18 2004 Dave Jones <davej@redhat.com>
+- Rebase to 2.6.9
+- Speedtouch USB DSL modem driver update.
+- Cleanup some iseries config options.
+
+* Fri Oct 15 2004 Dave Jones <davej@redhat.com>
+- 2.6.9-rc4-bk3
+- Fix up a bunch of unresolved symbols that crept in recently.
+- Remove bogus O_NONBLOCK patch which broke lots of userspace.
+- Fix booting on PPC64 by reserving initrd pages.
+
+* Thu Oct 14 2004 Dave Jones <davej@redhat.com>
+- Rebase to 2.6.9-rc4-bk2
+- librtas needs to work around the /dev/mem restrictions.
+- EXT3 reservations use-before-initialised bugfix.
+- support O_NONBLOCK for read,pread,readv of regular files.
+- EDD blows up some x86-64's. Disable again.
+
+* Wed Oct 13 2004 Dave Jones <davej@redhat.com>
+- Make EDD driver modular on x86-64 too.
+- Various mkinitrd spec changes (Jeremy Katz)
+- Enable a bunch more PPC64 config options. (Dave Howells)
+- Enable ACPI cpufreq driver for x86-64 too.
+
+* Tue Oct 12 2004 Dave Jones <davej@redhat.com>
+- Rebase to 2.6.9-rc4-bk1
+- Tux update.
+- Update netdump/diskdump patches
+- PowerPC 64 netboot changes.
+- Various CONFIG_ option diddling.
+- Fix up the find_isa_irq_pin() oops on reboot for x86-64 too.
+
+* Mon Oct 11 2004 Dave Jones <davej@redhat.com>
+- Rebase to 2.6.9-rc4
+- Enable CONFIG_MICROCODE for x86-64
+
+* Fri Oct 8 2004 Dave Jones <davej@redhat.com>
+- Rebase to 2.6.9-rc3-bk8
+
+* Thu Oct 7 2004 Dave Jones <davej@redhat.com>
+- Rebase to 2.6.9-rc3-bk7
+- Fix up PPC/PPC64 compilation failures due to new binutils. (David Woodhouse)
+
+* Wed Oct 6 2004 Dave Jones <davej@redhat.com>
+- Rebase to 2.6.9-rc3-bk6
+- Add xattr support for tmpfs.
+
+* Mon Oct 4 2004 Stephen C. Tweedie <sct@redhat.com>
+- Update ext3 online resize to 2.6.9-rc3-mm2 upstream
+- Reenable ext3 online resize in .spec
+
+* Tue Sep 28 2004 Jeremy Katz <katzj@redhat.com>
+- add patch from Roland McGrath/James Morris to fix mprotect hook bug (#133505)
+
+* Mon Sep 20 2004 Arjan van de Ven <arjanv@redhat.com>
+- 2.6.9-rc2-bk5
+
+* Thu Sep 16 2004 Arjan van de Ven <arjanv@redhat.com>
+- fix tux for x86-64 and ppc64
+
+* Tue Sep 14 2004 Arjan van de Ven <arjanv@redhat.com>
+- 2.6.9-rc2
+- add diskdump
+
+* Fri Sep 10 2004 Arjan van de Ven <arjanv@redhat.com>
+- 2.6.9-rc1-bk17 ; make ppc32 build
+
+* Tue Sep 07 2004 Arjan van de Ven <arjanv@redhat.com>
+- 2.6.9-rc1-bk13
+
+* Mon Sep 06 2004 Arjan van de Ven <arjanv@redhat.com>
+- disable online resize again
+- hopefully fix Quake3 interaction with execshield
+- add Alan's borken-bios-IRQ workaround patch
+
+* Sat Sep 04 2004 Arjan van de Ven <arjanv@redhat.com>
+- 2.6.9-rc1-bk11
* Tue Aug 31 2004 Arjan van de Ven <arjanv@redhat.com>
- fix execshield buglet with legacy binaries
* Mon Aug 9 2004 Arjan van de Ven <arjanv@redhat.com>
- 2.6.8-rc3-bk3
-* Thu Aug 5 2004 Mark Huang <mlhuang@cs.princeton.edu>
-- adapt for Fedora Core 2 based PlanetLab 3.0 (remove Source and Patch
- sections, most non-x86 sections, and GPG sections)
-
* Wed Aug 4 2004 Arjan van de Ven <arjanv@redhat.com>
- Add the flex-mmap bits for s390/s390x (Pete Zaitcev)
- Add flex-mmap for x86-64 32 bit emulation
- switch several cpufreq modules to built in since detecting in userspace
which to use is unpleasant
* Thu Jul 03 2003 Arjan van de Ven <arjanv@redhat.com>
-- 2.6 start
-
+- 2.6 start
git://git.onelab.eu / linux-2.6.git / commitdiff