+++ /dev/null
-# We have to override the new %%install behavior because, well... the kernel is special.
-%global __spec_install_pre %{___build_pre}
-
-Summary: The Linux kernel
-
-# For a stable, released kernel, released_kernel should be 1. For rawhide
-# and/or a kernel built from an rc or git snapshot, released_kernel should
-# be 0.
-%global released_kernel 1
-
-# Save original buildid for later if it's defined
-%if 0%{?buildid:1}
-%global orig_buildid %{buildid}
-%undefine buildid
-%endif
-
-###################################################################
-# Polite request for people who spin their own kernel rpms:
-# please modify the "buildid" define in a way that identifies
-# that the kernel isn't the stock distribution kernel, for example,
-# by setting the define to ".local" or ".bz123456". This will be
-# appended to the full kernel version.
-#
-# (Uncomment the '#' and both spaces below to set the buildid.)
-#
-%define buildid .planetlab
-###################################################################
-
-# The buildid can also be specified on the rpmbuild command line
-# by adding --define="buildid .whatever". If both the specfile and
-# the environment define a buildid they will be concatenated together.
-%if 0%{?orig_buildid:1}
-%if 0%{?buildid:1}
-%global srpm_buildid %{buildid}
-%define buildid %{srpm_buildid}%{orig_buildid}
-%else
-%define buildid %{orig_buildid}
-%endif
-%endif
-
-# baserelease defines which build revision of this kernel version we're
-# building. We used to call this fedora_build, but the magical name
-# baserelease is matched by the rpmdev-bumpspec tool, which you should use.
-#
-# We used to have some extra magic weirdness to bump this automatically,
-# but now we don't. Just use: rpmdev-bumpspec -c 'comment for changelog'
-# When changing base_sublevel below or going from rc to a final kernel,
-# reset this by hand to 1 (or to 0 and then use rpmdev-bumpspec).
-# scripts/rebase.sh should be made to do that for you, actually.
-#
-# For non-released -rc kernels, this will be prepended with "0.", so
-# for example a 3 here will become 0.3
-#
-%global baserelease 8
-%global fedora_build %{baserelease}
-
-# base_sublevel is the kernel version we're starting with and patching
-# on top of -- for example, 2.6.22-rc7-git1 starts with a 2.6.21 base,
-# which yields a base_sublevel of 21.
-%define base_sublevel 1
-
-## If this is a released kernel ##
-%if 0%{?released_kernel}
-
-# Do we have a -stable update to apply?
-%define stable_update 0
-# Is it a -stable RC?
-%define stable_rc 0
-# Set rpm version accordingly
-%if 0%{?stable_update}
-%define stablerev %{stable_update}
-%define stable_base %{stable_update}
-%if 0%{?stable_rc}
-# stable RCs are incremental patches, so we need the previous stable patch
-%define stable_base %(echo $((%{stable_update} - 1)))
-%endif
-%endif
-%define rpmversion 3.%{base_sublevel}.%{stable_update}
-
-## The not-released-kernel case ##
-%else
-# The next upstream release sublevel (base_sublevel+1)
-%define upstream_sublevel %(echo $((%{base_sublevel} + 1)))
-# The rc snapshot level
-%define rcrev 10
-# The git snapshot level
-%define gitrev 1
-# Set rpm version accordingly
-%define rpmversion 3.%{upstream_sublevel}.0
-%endif
-# Nb: The above rcrev and gitrev values automagically define Patch00 and Patch01 below.
-
-# What parts do we want to build? We must build at least one kernel.
-# These are the kernels that are built IF the architecture allows it.
-# All should default to 1 (enabled) and be flipped to 0 (disabled)
-# by later arch-specific checks.
-
-# The following build options are enabled by default.
-# Use either --without <opt> in your rpmbuild command or force values
-# to 0 in here to disable them.
-#
-# standard kernel
-%define with_up %{?_without_up: 0} %{?!_without_up: 1}
-# kernel-smp (only valid for ppc 32-bit)
-%define with_smp %{?_without_smp: 0} %{?!_without_smp: 1}
-# kernel-PAE (only valid for i686)
-%define with_pae %{?_without_pae: 0} %{?!_without_pae: 1}
-# kernel-debug
-%define with_debug %{?_without_debug: 0} %{?!_without_debug: 1}
-# kernel-doc
-%define with_doc %{?_without_doc: 0} %{?!_without_doc: 1}
-# kernel-headers
-%define with_headers %{?_without_headers: 0} %{?!_without_headers: 1}
-# tools
-%define with_tools %{?_without_tools: 0} %{?!_without_tools: 1}
-# kernel-debuginfo
-%define with_debuginfo %{?_without_debuginfo: 0} %{?!_without_debuginfo: 1}
-# kernel-bootwrapper (for creating zImages from kernel + initrd)
-%define with_bootwrapper %{?_without_bootwrapper: 0} %{?!_without_bootwrapper: 1}
-# Want to build a the vsdo directories installed
-%define with_vdso_install %{?_without_vdso_install: 0} %{?!_without_vdso_install: 1}
-# ARM OMAP (Beagle/Panda Board)
-%define with_omap %{?_without_omap: 0} %{?!_without_omap: 1}
-# kernel-tegra (only valid for arm)
-%define with_tegra %{?_without_tegra: 0} %{?!_without_tegra: 1}
-
-# Build the kernel-doc package, but don't fail the build if it botches.
-# Here "true" means "continue" and "false" means "fail the build".
-%if 0%{?released_kernel}
-%define doc_build_fail false
-%else
-%define doc_build_fail true
-%endif
-
-%define rawhide_skip_docs 0
-%if 0%{?rawhide_skip_docs}
-%define with_doc 0
-%define doc_build_fail true
-%endif
-
-# Additional options for user-friendly one-off kernel building:
-#
-# Only build the base kernel (--with baseonly):
-%define with_baseonly %{?_with_baseonly: 1} %{?!_with_baseonly: 0}
-# Only build the smp kernel (--with smponly):
-%define with_smponly %{?_with_smponly: 1} %{?!_with_smponly: 0}
-# Only build the pae kernel (--with paeonly):
-%define with_paeonly %{?_with_paeonly: 1} %{?!_with_paeonly: 0}
-# Only build the debug kernel (--with dbgonly):
-%define with_dbgonly %{?_with_dbgonly: 1} %{?!_with_dbgonly: 0}
-
-# should we do C=1 builds with sparse
-%define with_sparse %{?_with_sparse: 1} %{?!_with_sparse: 0}
-
-# Set debugbuildsenabled to 1 for production (build separate debug kernels)
-# and 0 for rawhide (all kernels are debug kernels).
-# See also 'make debug' and 'make release'.
-%define debugbuildsenabled 1
-
-# Want to build a vanilla kernel build without any non-upstream patches?
-%define with_vanilla %{?_with_vanilla: 1} %{?!_with_vanilla: 0}
-
-# pkg_release is what we'll fill in for the rpm Release: field
-%if 0%{?released_kernel}
-
-%if 0%{?stable_rc}
-%define stable_rctag .rc%{stable_rc}
-%endif
-%define pkg_release %{fedora_build}%{?stable_rctag}%{?buildid}%{?dist}
-
-%else
-
-# non-released_kernel
-%if 0%{?rcrev}
-%define rctag .rc%rcrev
-%else
-%define rctag .rc0
-%endif
-%if 0%{?gitrev}
-%define gittag .git%gitrev
-%else
-%define gittag .git0
-%endif
-%define pkg_release 0%{?rctag}%{?gittag}.%{fedora_build}%{?buildid}%{?dist}
-
-%endif
-
-# The kernel tarball/base version
-%define kversion 3.%{base_sublevel}
-
-%define make_target bzImage
-
-%define KVERREL %{version}-%{release}.%{_target_cpu}
-%define hdrarch %_target_cpu
-%define asmarch %_target_cpu
-
-%if 0%{!?nopatches:1}
-%define nopatches 0
-%endif
-
-%if %{with_vanilla}
-%define nopatches 1
-%endif
-
-%if %{nopatches}
-%define with_bootwrapper 0
-%define variant -vanilla
-%else
-%define variant_fedora -fedora
-%endif
-
-%define using_upstream_branch 0
-%if 0%{?upstream_branch:1}
-%define stable_update 0
-%define using_upstream_branch 1
-%define variant -%{upstream_branch}%{?variant_fedora}
-%define pkg_release 0.%{fedora_build}%{upstream_branch_tag}%{?buildid}%{?dist}
-%endif
-
-%if !%{debugbuildsenabled}
-%define with_debug 0
-%endif
-
-%if !%{with_debuginfo}
-%define _enable_debug_packages 0
-%endif
-%define debuginfodir /usr/lib/debug
-
-# kernel-PAE is only built on i686.
-%ifnarch i686
-%define with_pae 0
-%endif
-
-# kernel-tegra and omap is only built on armv7 hard and softfp
-%ifnarch armv7hl armv7l
-%define with_tegra 0
-%define with_omap 0
-%endif
-
-# if requested, only build base kernel
-%if %{with_baseonly}
-%define with_smp 0
-%define with_pae 0
-%define with_debug 0
-%endif
-
-# if requested, only build smp kernel
-%if %{with_smponly}
-%define with_up 0
-%define with_pae 0
-%define with_debug 0
-%endif
-
-# if requested, only build pae kernel
-%if %{with_paeonly}
-%define with_up 0
-%define with_smp 0
-%define with_debug 0
-%endif
-
-# if requested, only build debug kernel
-%if %{with_dbgonly}
-%if %{debugbuildsenabled}
-%define with_up 0
-%define with_pae 0
-%endif
-%define with_smp 0
-%define with_pae 0
-%define with_tools 0
-%endif
-
-%define all_x86 i386 i686
-
-%if %{with_vdso_install}
-# These arches install vdso/ directories.
-%define vdso_arches %{all_x86} x86_64 ppc ppc64
-%endif
-
-# Overrides for generic default options
-
-# only ppc and alphav56 need separate smp kernels
-%ifnarch ppc alphaev56
-%define with_smp 0
-%endif
-
-# don't do debug builds on anything but i686 and x86_64
-%ifnarch i686 x86_64
-%define with_debug 0
-%endif
-
-# only package docs noarch
-%ifnarch noarch
-%define with_doc 0
-%endif
-
-# don't build noarch kernels or headers (duh)
-%ifarch noarch
-%define with_up 0
-%define with_headers 0
-%define with_tools 0
-%define all_arch_configs kernel-%{version}-*.config
-%endif
-
-# bootwrapper is only on ppc
-%ifnarch ppc ppc64
-%define with_bootwrapper 0
-%endif
-
-# sparse blows up on ppc64 alpha and sparc64
-%ifarch ppc64 ppc alpha sparc64
-%define with_sparse 0
-%endif
-
-# Per-arch tweaks
-
-%ifarch %{all_x86}
-%define asmarch x86
-%define hdrarch i386
-%define all_arch_configs kernel-%{version}-i?86*.config
-%define image_install_path boot
-%define kernel_image arch/x86/boot/bzImage
-%endif
-
-%ifarch x86_64
-%define asmarch x86
-%define all_arch_configs kernel-%{version}-x86_64*.config
-%define image_install_path boot
-%define kernel_image arch/x86/boot/bzImage
-%endif
-
-%ifarch ppc64
-%define asmarch powerpc
-%define hdrarch powerpc
-%define all_arch_configs kernel-%{version}-ppc64*.config
-%define image_install_path boot
-%define make_target vmlinux
-%define kernel_image vmlinux
-%define kernel_image_elf 1
-%endif
-
-%ifarch s390x
-%define asmarch s390
-%define hdrarch s390
-%define all_arch_configs kernel-%{version}-s390x.config
-%define image_install_path boot
-%define make_target image
-%define kernel_image arch/s390/boot/image
-%define with_tools 0
-%endif
-
-%ifarch sparc64
-%define asmarch sparc
-%define all_arch_configs kernel-%{version}-sparc64*.config
-%define make_target vmlinux
-%define kernel_image vmlinux
-%define image_install_path boot
-%define with_tools 0
-%endif
-
-%ifarch sparcv9
-%define hdrarch sparc
-%endif
-
-%ifarch ppc
-%define asmarch powerpc
-%define hdrarch powerpc
-%define all_arch_configs kernel-%{version}-ppc{-,.}*config
-%define image_install_path boot
-%define make_target vmlinux
-%define kernel_image vmlinux
-%define kernel_image_elf 1
-%endif
-
-%ifarch ia64
-%define all_arch_configs kernel-%{version}-ia64*.config
-%define image_install_path boot/efi/EFI/redhat
-%define make_target compressed
-%define kernel_image vmlinux.gz
-%endif
-
-%ifarch alpha alphaev56
-%define all_arch_configs kernel-%{version}-alpha*.config
-%define image_install_path boot
-%define make_target vmlinux
-%define kernel_image vmlinux
-%endif
-
-%ifarch %{arm}
-%define all_arch_configs kernel-%{version}-arm*.config
-%define image_install_path boot
-%define asmarch arm
-%define hdrarch arm
-%define make_target bzImage
-%define kernel_image arch/arm/boot/zImage
-# we build a up kernel on armv5tel. its used for qemu.
-%ifnarch armv5tel
-%define with_up 0
-%endif
-# we only build headers on the base arm arches
-# just like we used to only build them on i386 for x86
-%ifnarch armv5tel armv7hl
-%define with_headers 0
-%endif
-%define with_perf 0
-%endif
-
-%if %{nopatches}
-# XXX temporary until last vdso patches are upstream
-%define vdso_arches ppc ppc64
-%endif
-
-# Should make listnewconfig fail if there's config options
-# printed out?
-%if %{nopatches}%{using_upstream_branch}
-%define listnewconfig_fail 0
-%else
-%define listnewconfig_fail 1
-%endif
-
-# To temporarily exclude an architecture from being built, add it to
-# %%nobuildarches. Do _NOT_ use the ExclusiveArch: line, because if we
-# don't build kernel-headers then the new build system will no longer let
-# us use the previous build of that package -- it'll just be completely AWOL.
-# Which is a BadThing(tm).
-
-# We only build kernel-headers on the following...
-%define nobuildarches i386 s390 sparc sparcv9
-
-%ifarch %nobuildarches
-%define with_up 0
-%define with_smp 0
-%define with_pae 0
-%define with_debuginfo 0
-%define with_tools 0
-%define _enable_debug_packages 0
-%endif
-
-%define with_pae_debug 0
-%if %{with_pae}
-%define with_pae_debug %{with_debug}
-%endif
-
-# Architectures we build tools/cpupower on
-%define cpupowerarchs %{ix86} x86_64 ppc ppc64
-#%define cpupowerarchs ppc ppc64
-
-#
-# Three sets of minimum package version requirements in the form of Conflicts:
-# to versions below the minimum
-#
-
-#
-# First the general kernel 2.6 required versions as per
-# Documentation/Changes
-#
-%define kernel_dot_org_conflicts ppp < 2.4.3-3, isdn4k-utils < 3.2-32, nfs-utils < 1.0.7-12, e2fsprogs < 1.37-4, util-linux < 2.12, jfsutils < 1.1.7-2, reiserfs-utils < 3.6.19-2, xfsprogs < 2.6.13-4, procps < 3.2.5-6.3, oprofile < 0.9.1-2, device-mapper-libs < 1.02.63-2, mdadm < 3.2.1-5
-
-#
-# Then a series of requirements that are distribution specific, either
-# because we add patches for something, or the older versions have
-# problems with the newer kernel or lack certain things that make
-# integration in the distro harder than needed.
-#
-%define package_conflicts initscripts < 7.23, udev < 063-6, iptables < 1.3.2-1, ipw2200-firmware < 2.4, iwl4965-firmware < 228.57.2, selinux-policy-targeted < 1.25.3-14, squashfs-tools < 4.0, wireless-tools < 29-3
-
-# We moved the drm include files into kernel-headers, make sure there's
-# a recent enough libdrm-devel on the system that doesn't have those.
-%define kernel_headers_conflicts libdrm-devel < 2.4.0-0.15
-
-#
-# Packages that need to be installed before the kernel is, because the %%post
-# scripts use them.
-#
-%define kernel_prereq fileutils, module-init-tools >= 3.11.1, initscripts >= 8.11.1-1, grubby >= 7.0.1
-%define initrd_prereq dracut >= 001-7
-
-#
-# This macro does requires, provides, conflicts, obsoletes for a kernel package.
-# %%kernel_reqprovconf <subpackage>
-# It uses any kernel_<subpackage>_conflicts and kernel_<subpackage>_obsoletes
-# macros defined above.
-#
-%define kernel_reqprovconf \
-Provides: kernel = %{rpmversion}-%{pkg_release}\
-Provides: kernel-%{_target_cpu} = %{rpmversion}-%{pkg_release}%{?1:.%{1}}\
-Provides: kernel-drm = 4.3.0\
-Provides: kernel-drm-nouveau = 16\
-Provides: kernel-modeset = 1\
-Provides: kernel-uname-r = %{KVERREL}%{?1:.%{1}}\
-Requires(pre): %{kernel_prereq}\
-Requires(pre): %{initrd_prereq}\
-Requires(post): /sbin/new-kernel-pkg\
-Requires(preun): /sbin/new-kernel-pkg\
-Conflicts: %{kernel_dot_org_conflicts}\
-Conflicts: %{package_conflicts}\
-%{expand:%%{?kernel%{?1:_%{1}}_conflicts:Conflicts: %%{kernel%{?1:_%{1}}_conflicts}}}\
-%{expand:%%{?kernel%{?1:_%{1}}_obsoletes:Obsoletes: %%{kernel%{?1:_%{1}}_obsoletes}}}\
-%{expand:%%{?kernel%{?1:_%{1}}_provides:Provides: %%{kernel%{?1:_%{1}}_provides}}}\
-# We can't let RPM do the dependencies automatic because it'll then pick up\
-# a correct but undesirable perl dependency from the module headers which\
-# isn't required for the kernel proper to function\
-AutoReq: no\
-AutoProv: yes\
-%{nil}
-
-Name: kernel%{?variant}
-Group: System Environment/Kernel
-License: GPLv2
-URL: http://www.kernel.org/
-Version: %{rpmversion}
-Release: %{pkg_release}
-# DO NOT CHANGE THE 'ExclusiveArch' LINE TO TEMPORARILY EXCLUDE AN ARCHITECTURE BUILD.
-# SET %%nobuildarches (ABOVE) INSTEAD
-ExclusiveArch: noarch %{all_x86} x86_64 ppc ppc64 ia64 %{sparc} s390 s390x alpha alphaev56 %{arm}
-ExclusiveOS: Linux
-
-%kernel_reqprovconf
-
-#
-# List the packages used during the kernel build
-#
-BuildRequires: module-init-tools, patch >= 2.5.4, bash >= 2.03, sh-utils, tar
-BuildRequires: bzip2, findutils, gzip, m4, perl, make >= 3.78, diffutils, gawk
-BuildRequires: gcc >= 3.4.2, binutils >= 2.12, redhat-rpm-config
-BuildRequires: net-tools
-BuildRequires: xmlto, asciidoc
-%if %{with_sparse}
-BuildRequires: sparse >= 0.4.1
-%endif
-%if %{with_tools}
-BuildRequires: elfutils-devel zlib-devel binutils-devel newt-devel python-devel perl(ExtUtils::Embed) pciutils-devel gettext
-%endif
-BuildConflicts: rhbuildsys(DiskFree) < 500Mb
-
-%define fancy_debuginfo 0
-%if %{with_debuginfo}
-%if 0%{?fedora} >= 8 || 0%{?rhel} >= 6
-%define fancy_debuginfo 1
-%endif
-%endif
-
-%if %{fancy_debuginfo}
-# Fancy new debuginfo generation introduced in Fedora 8.
-BuildRequires: rpm-build >= 4.4.2.1-4
-%define debuginfo_args --strict-build-id
-%endif
-
-Source0: ftp://ftp.kernel.org/pub/linux/kernel/v3.0/linux-%{kversion}.tar.bz2
-
-Source11: genkey
-Source14: find-provides
-Source15: merge.pl
-
-Source20: Makefile.config
-Source21: config-debug
-Source22: config-nodebug
-Source23: config-generic
-Source24: config-rhel-generic
-
-Source30: config-x86-generic
-Source31: config-i686-PAE
-Source32: config-x86-32-generic
-
-Source40: config-x86_64-generic
-
-Source50: config-powerpc-generic
-Source51: config-powerpc32-generic
-Source52: config-powerpc32-smp
-Source53: config-powerpc64
-
-Source60: config-ia64-generic
-
-Source70: config-s390x
-
-Source90: config-sparc64-generic
-
-Source100: config-arm-generic
-Source110: config-arm-omap-generic
-Source111: config-arm-tegra
-
-# This file is intentionally left empty in the stock kernel. Its a nicety
-# added for those wanting to do custom rebuilds with altered config opts.
-Source1000: config-local
-
-# Sources for kernel-tools
-Source2000: cpupower.service
-Source2001: cpupower.config
-
-# Here should be only the patches up to the upstream canonical Linus tree.
-
-# For a stable release kernel
-%if 0%{?stable_update}
-%if 0%{?stable_base}
-%define stable_patch_00 patch-3.%{base_sublevel}.%{stable_base}.bz2
-Patch00: %{stable_patch_00}
-%endif
-%if 0%{?stable_rc}
-%define stable_patch_01 patch-3.%{base_sublevel}.%{stable_update}-rc%{stable_rc}.bz2
-Patch01: %{stable_patch_01}
-%endif
-
-# non-released_kernel case
-# These are automagically defined by the rcrev and gitrev values set up
-# near the top of this spec file.
-%else
-%if 0%{?rcrev}
-Patch00: patch-3.%{upstream_sublevel}-rc%{rcrev}.bz2
-%if 0%{?gitrev}
-Patch01: patch-3.%{upstream_sublevel}-rc%{rcrev}-git%{gitrev}.bz2
-%endif
-%else
-# pre-{base_sublevel+1}-rc1 case
-%if 0%{?gitrev}
-Patch00: patch-3.%{base_sublevel}-git%{gitrev}.bz2
-%endif
-%endif
-%endif
-
-%if %{using_upstream_branch}
-### BRANCH PATCH ###
-%endif
-
-Patch02: git-linus.diff
-
-# we also need compile fixes for -vanilla
-Patch04: linux-2.6-compile-fixes.patch
-
-# build tweak for build ID magic, even for -vanilla
-Patch05: linux-2.6-makefile-after_link.patch
-
-%if !%{nopatches}
-
-
-# revert upstream patches we get via other methods
-Patch09: linux-2.6-upstream-reverts.patch
-# Git trees.
-
-# Standalone patches
-
-Patch100: taint-vbox.patch
-Patch160: linux-2.6-32bit-mmap-exec-randomization.patch
-Patch161: linux-2.6-i386-nx-emulation.patch
-
-Patch202: linux-2.6-debug-taint-vm.patch
-
-Patch383: linux-2.6-defaults-aspm.patch
-
-Patch390: linux-2.6-defaults-acpi-video.patch
-Patch391: linux-2.6-acpi-video-dos.patch
-Patch394: linux-2.6-acpi-debug-infinite-loop.patch
-Patch395: acpi-ensure-thermal-limits-match-cpu-freq.patch
-Patch396: acpi-sony-nonvs-blacklist.patch
-
-Patch450: linux-2.6-input-kill-stupid-messages.patch
-Patch452: linux-2.6.30-no-pcspkr-modalias.patch
-
-Patch460: linux-2.6-serial-460800.patch
-
-Patch470: die-floppy-die.patch
-Patch471: floppy-drop-disable_hlt-warning.patch
-
-Patch510: linux-2.6-silence-noise.patch
-Patch530: linux-2.6-silence-fbcon-logo.patch
-
-Patch700: linux-2.6-e1000-ich9-montevina.patch
-
-Patch800: linux-2.6-crash-driver.patch
-
-# crypto/
-
-# virt + ksm patches
-Patch1500: fix_xen_guest_on_old_EC2.patch
-
-# DRM
-
-# nouveau + drm fixes
-Patch1810: drm-nouveau-updates.patch
-# intel drm is all merged upstream
-Patch1824: drm-intel-next.patch
-# make sure the lvds comes back on lid open
-Patch1825: drm-intel-make-lvds-work.patch
-# hush the i915 fbc noise
-Patch1826: drm-i915-fbc-stfu.patch
-# rhbz#729882, https://bugs.freedesktop.org/attachment.cgi?id=49069
-Patch1827: drm-i915-sdvo-lvds-is-digital.patch
-
-Patch1850: drm-lower-severity-radeon-lockup.diff
-
-Patch1900: linux-2.6-intel-iommu-igfx.patch
-
-# Quiet boot fixes
-# silence the ACPI blacklist code
-Patch2802: linux-2.6-silence-acpi-blacklist.patch
-
-# media patches
-Patch2899: linux-2.6-v4l-dvb-fixes.patch
-Patch2900: linux-2.6-v4l-dvb-update.patch
-Patch2901: linux-2.6-v4l-dvb-experimental.patch
-Patch2902: linux-2.6-v4l-dvb-uvcvideo-update.patch
-
-Patch2903: media-DiBcom-protect-the-I2C-bufer-access.patch
-Patch2904: media-dib0700-protect-the-dib0700-buffer-access.patch
-Patch2905: media-dib0700-correct-error-message.patch
-
-Patch3000: rcutree-avoid-false-quiescent-states.patch
-
-# fs fixes
-
-# NFSv4
-
-# patches headed upstream
-Patch12010: add-appleir-usb-driver.patch
-
-Patch12016: disable-i8042-check-on-apple-mac.patch
-
-Patch12021: udlfb-bind-framebuffer-to-interface.patch
-
-Patch12023: ums-realtek-driver-uses-stack-memory-for-DMA.patch
-Patch12024: epoll-fix-spurious-lockdep-warnings.patch
-Patch12025: rcu-avoid-just-onlined-cpu-resched.patch
-Patch12026: block-stray-block-put-after-teardown.patch
-Patch12027: usb-add-quirk-for-logitech-webcams.patch
-Patch12029: crypto-register-cryptd-first.patch
-Patch12030: epoll-limit-paths.patch
-
-Patch12303: dmar-disable-when-ricoh-multifunction.patch
-
-Patch13002: revert-efi-rtclock.patch
-Patch13003: efi-dont-map-boot-services-on-32bit.patch
-
-Patch13007: add-macbookair41-keyboard.patch
-
-Patch13009: hvcs_pi_buf_alloc.patch
-
-Patch13013: powerpc-Fix-deadlock-in-icswx-code.patch
-
-Patch13014: iwlagn-fix-ht_params-NULL-pointer-dereference.patch
-
-Patch20000: utrace.patch
-
-# Flattened devicetree support
-Patch21000: arm-omap-dt-compat.patch
-Patch21001: arm-smsc-support-reading-mac-address-from-device-tree.patch
-
-#rhbz #722509
-Patch21002: mmc-Always-check-for-lower-base-frequency-quirk-for-.patch
-
-#rhbz #735946
-Patch21020: 0001-mm-vmscan-Limit-direct-reclaim-for-higher-order-allo.patch
-Patch21021: 0002-mm-Abort-reclaim-compaction-if-compaction-can-procee.patch
-
-#rhbz 748691
-Patch21030: be2net-non-member-vlan-pkts-not-received-in-promisco.patch
-Patch21031: benet-remove-bogus-unlikely-on-vlan-check.patch
-
-#rhbz 749166
-Patch21050: xfs-Fix-possible-memory-corruption-in-xfs_readlink.patch
-
-Patch21070: oom-fix-integer-overflow-of-points.patch
-
-%endif
-
-BuildRoot: %{_tmppath}/kernel-%{KVERREL}-root
-
-%description
-The kernel package contains the Linux kernel (vmlinuz), the core of any
-Linux operating system. The kernel handles the basic functions
-of the operating system: memory allocation, process allocation, device
-input and output, etc.
-
-
-%package doc
-Summary: Various documentation bits found in the kernel source
-Group: Documentation
-%description doc
-This package contains documentation files from the kernel
-source. Various bits of information about the Linux kernel and the
-device drivers shipped with it are documented in these files.
-
-You'll want to install this package if you need a reference to the
-options that can be passed to Linux kernel modules at load time.
-
-
-%package headers
-Summary: Header files for the Linux kernel for use by glibc
-Group: Development/System
-Obsoletes: glibc-kernheaders < 3.0-46
-Provides: glibc-kernheaders = 3.0-46
-%description headers
-Kernel-headers includes the C header files that specify the interface
-between the Linux kernel and userspace libraries and programs. The
-header files define structures and constants that are needed for
-building most standard programs and are also needed for rebuilding the
-glibc package.
-
-%package firmware
-Summary: Firmware files used by the Linux kernel
-Group: Development/System
-# This is... complicated.
-# Look at the WHENCE file.
-License: GPL+ and GPLv2+ and MIT and Redistributable, no modification permitted
-%if "x%{?variant}" != "x"
-Provides: kernel-firmware = %{rpmversion}-%{pkg_release}
-%endif
-%description firmware
-Kernel-firmware includes firmware files required for some devices to
-operate.
-
-%package bootwrapper
-Summary: Boot wrapper files for generating combined kernel + initrd images
-Group: Development/System
-Requires: gzip binutils
-%description bootwrapper
-Kernel-bootwrapper contains the wrapper code which makes bootable "zImage"
-files combining both kernel and initial ramdisk.
-
-%package debuginfo-common-%{_target_cpu}
-Summary: Kernel source files used by %{name}-debuginfo packages
-Group: Development/Debug
-%description debuginfo-common-%{_target_cpu}
-This package is required by %{name}-debuginfo subpackages.
-It provides the kernel source files common to all builds.
-
-%if %{with_tools}
-%package -n kernel-tools
-Summary: Assortment of tools for the Linux kernel
-Group: Development/System
-License: GPLv2
-Obsoletes: perf
-Provides: perf
-Provides: cpupowerutils = 1:009-0.6.p1
-Obsoletes: cpupowerutils < 1:009-0.6.p1
-Provides: cpufreq-utils = 1:009-0.6.p1
-Provides: cpufrequtils = 1:009-0.6.p1
-Obsoletes: cpufreq-utils < 1:009-0.6.p1
-Obsoletes: cpufrequtils < 1:009-0.6.p1
-Obsoletes: cpuspeed < 1:1.5-16
-%description -n kernel-tools
-This package contains the tools/ directory from the kernel source
-- the perf tool and the supporting documentation.
-
-%package -n kernel-tools-devel
-Summary: Assortment of tools for the Linux kernel
-Group: Development/System
-License: GPLv2
-Requires: kernel-tools = %{version}-%{release}
-Provides: cpupowerutils-devel = 1:009-0.6.p1
-Obsoletes: cpupowerutils-devel < 1:009-0.6.p1
-%description -n kernel-tools-devel
-This package contains the development files for the tools/ directory from
-the kernel source.
-
-%package -n kernel-tools-debuginfo
-Summary: Debug information for package kernel-tools
-Group: Development/Debug
-Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}
-AutoReqProv: no
-%description -n kernel-tools-debuginfo
-This package provides debug information for package kernel-tools.
-
-# Note that this pattern only works right to match the .build-id
-# symlinks because of the trailing nonmatching alternation and
-# the leading .*, because of find-debuginfo.sh's buggy handling
-# of matching the pattern against the symlinks file.
-%{expand:%%global debuginfo_args %{?debuginfo_args} -p '.*%%{_bindir}/perf(\.debug)?|.*%%{_libexecdir}/perf-core/.*|.*%%{_bindir}/centrino-decode(\.debug)?|.*%%{_bindir}/powernow-k8-decode(\.debug)?|.*%%{_bindir}/cpupower(\.debug)?|.*%%{_libdir}/libcpupower.*|XXX' -o kernel-tools-debuginfo.list}
-%endif
-
-
-#
-# This macro creates a kernel-<subpackage>-debuginfo package.
-# %%kernel_debuginfo_package <subpackage>
-#
-%define kernel_debuginfo_package() \
-%package %{?1:%{1}-}debuginfo\
-Summary: Debug information for package %{name}%{?1:-%{1}}\
-Group: Development/Debug\
-Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}\
-Provides: %{name}%{?1:-%{1}}-debuginfo-%{_target_cpu} = %{version}-%{release}\
-AutoReqProv: no\
-%description -n %{name}%{?1:-%{1}}-debuginfo\
-This package provides debug information for package %{name}%{?1:-%{1}}.\
-This is required to use SystemTap with %{name}%{?1:-%{1}}-%{KVERREL}.\
-%{expand:%%global debuginfo_args %{?debuginfo_args} -p '/.*/%%{KVERREL}%{?1:\.%{1}}/.*|/.*%%{KVERREL}%{?1:\.%{1}}(\.debug)?' -o debuginfo%{?1}.list}\
-%{nil}
-
-#
-# This macro creates a kernel-<subpackage>-devel package.
-# %%kernel_devel_package <subpackage> <pretty-name>
-#
-%define kernel_devel_package() \
-%package %{?1:%{1}-}devel\
-Summary: Development package for building kernel modules to match the %{?2:%{2} }kernel\
-Group: System Environment/Kernel\
-Provides: kernel%{?1:-%{1}}-devel-%{_target_cpu} = %{version}-%{release}\
-Provides: kernel-devel-%{_target_cpu} = %{version}-%{release}%{?1:.%{1}}\
-Provides: kernel-devel = %{version}-%{release}%{?1:.%{1}}\
-Provides: kernel-devel-uname-r = %{KVERREL}%{?1:.%{1}}\
-AutoReqProv: no\
-Requires(pre): /usr/bin/find\
-Requires: perl\
-%description -n kernel%{?variant}%{?1:-%{1}}-devel\
-This package provides kernel headers and makefiles sufficient to build modules\
-against the %{?2:%{2} }kernel package.\
-%{nil}
-
-#
-# This macro creates a kernel-<subpackage> and its -devel and -debuginfo too.
-# %%define variant_summary The Linux kernel compiled for <configuration>
-# %%kernel_variant_package [-n <pretty-name>] <subpackage>
-#
-%define kernel_variant_package(n:) \
-%package %1\
-Summary: %{variant_summary}\
-Group: System Environment/Kernel\
-%kernel_reqprovconf\
-%{expand:%%kernel_devel_package %1 %{!?-n:%1}%{?-n:%{-n*}}}\
-%{expand:%%kernel_debuginfo_package %1}\
-%{nil}
-
-
-# First the auxiliary packages of the main kernel package.
-%kernel_devel_package
-%kernel_debuginfo_package
-
-
-# Now, each variant package.
-
-%define variant_summary The Linux kernel compiled for SMP machines
-%kernel_variant_package -n SMP smp
-%description smp
-This package includes a SMP version of the Linux kernel. It is
-required only on machines with two or more CPUs as well as machines with
-hyperthreading technology.
-
-Install the kernel-smp package if your machine uses two or more CPUs.
-
-
-%define variant_summary The Linux kernel compiled for PAE capable machines
-%kernel_variant_package PAE
-%description PAE
-This package includes a version of the Linux kernel with support for up to
-64GB of high memory. It requires a CPU with Physical Address Extensions (PAE).
-The non-PAE kernel can only address up to 4GB of memory.
-Install the kernel-PAE package if your machine has more than 4GB of memory.
-
-
-%define variant_summary The Linux kernel compiled with extra debugging enabled for PAE capable machines
-%kernel_variant_package PAEdebug
-Obsoletes: kernel-PAE-debug
-%description PAEdebug
-This package includes a version of the Linux kernel with support for up to
-64GB of high memory. It requires a CPU with Physical Address Extensions (PAE).
-The non-PAE kernel can only address up to 4GB of memory.
-Install the kernel-PAE package if your machine has more than 4GB of memory.
-
-This variant of the kernel has numerous debugging options enabled.
-It should only be installed when trying to gather additional information
-on kernel bugs, as some of these options impact performance noticably.
-
-
-%define variant_summary The Linux kernel compiled with extra debugging enabled
-%kernel_variant_package debug
-%description debug
-The kernel package contains the Linux kernel (vmlinuz), the core of any
-Linux operating system. The kernel handles the basic functions
-of the operating system: memory allocation, process allocation, device
-input and output, etc.
-
-This variant of the kernel has numerous debugging options enabled.
-It should only be installed when trying to gather additional information
-on kernel bugs, as some of these options impact performance noticably.
-
-
-%define variant_summary The Linux kernel compiled for TI-OMAP boards
-%kernel_variant_package omap
-%description omap
-This package includes a version of the Linux kernel with support for
-TI-OMAP based systems, i.e., BeagleBoard-xM.
-
-%define variant_summary The Linux kernel compiled for tegra boards
-%kernel_variant_package tegra
-%description tegra
-This package includes a version of the Linux kernel with support for
-nvidia tegra based systems, i.e., trimslice, ac-100.
-
-
-%prep
-# do a few sanity-checks for --with *only builds
-%if %{with_baseonly}
-%if !%{with_up}%{with_pae}
-echo "Cannot build --with baseonly, up build is disabled"
-exit 1
-%endif
-%endif
-
-%if %{with_smponly}
-%if !%{with_smp}
-echo "Cannot build --with smponly, smp build is disabled"
-exit 1
-%endif
-%endif
-
-# more sanity checking; do it quietly
-if [ "%{patches}" != "%%{patches}" ] ; then
- for patch in %{patches} ; do
- if [ ! -f $patch ] ; then
- echo "ERROR: Patch ${patch##/*/} listed in specfile but is missing"
- exit 1
- fi
- done
-fi 2>/dev/null
-
-patch_command='patch -p1 -F1 -s'
-ApplyPatch()
-{
- local patch=$1
- shift
- if [ ! -f $RPM_SOURCE_DIR/$patch ]; then
- exit 1
- fi
-%if !%{using_upstream_branch}
- if ! grep -E "^Patch[0-9]+: $patch\$" %{_specdir}/${RPM_PACKAGE_NAME%%%%%{?variant}}.spec ; then
- if [ "${patch:0:8}" != "patch-3." ] ; then
- echo "ERROR: Patch $patch not listed as a source patch in specfile"
- exit 1
- fi
- fi 2>/dev/null
-%endif
- case "$patch" in
- *.bz2) bunzip2 < "$RPM_SOURCE_DIR/$patch" | $patch_command ${1+"$@"} ;;
- *.gz) gunzip < "$RPM_SOURCE_DIR/$patch" | $patch_command ${1+"$@"} ;;
- *) $patch_command ${1+"$@"} < "$RPM_SOURCE_DIR/$patch" ;;
- esac
-}
-
-# don't apply patch if it's empty
-ApplyOptionalPatch()
-{
- local patch=$1
- shift
- if [ ! -f $RPM_SOURCE_DIR/$patch ]; then
- exit 1
- fi
- local C=$(wc -l $RPM_SOURCE_DIR/$patch | awk '{print $1}')
- if [ "$C" -gt 9 ]; then
- ApplyPatch $patch ${1+"$@"}
- fi
-}
-
-# we don't want a .config file when building firmware: it just confuses the build system
-%define build_firmware \
- mv .config .config.firmware_save \
- make INSTALL_FW_PATH=$RPM_BUILD_ROOT/lib/firmware firmware_install \
- mv .config.firmware_save .config
-
-# First we unpack the kernel tarball.
-# If this isn't the first make prep, we use links to the existing clean tarball
-# which speeds things up quite a bit.
-
-# Update to latest upstream.
-%if 0%{?released_kernel}
-%define vanillaversion 3.%{base_sublevel}
-# non-released_kernel case
-%else
-%if 0%{?rcrev}
-%define vanillaversion 3.%{upstream_sublevel}-rc%{rcrev}
-%if 0%{?gitrev}
-%define vanillaversion 3.%{upstream_sublevel}-rc%{rcrev}-git%{gitrev}
-%endif
-%else
-# pre-{base_sublevel+1}-rc1 case
-%if 0%{?gitrev}
-%define vanillaversion 3.%{base_sublevel}-git%{gitrev}
-%else
-%define vanillaversion 3.%{base_sublevel}
-%endif
-%endif
-%endif
-
-# %%{vanillaversion} : the full version name, e.g. 2.6.35-rc6-git3
-# %%{kversion} : the base version, e.g. 2.6.34
-
-# Use kernel-%%{kversion}%%{?dist} as the top-level directory name
-# so we can prep different trees within a single git directory.
-
-# Build a list of the other top-level kernel tree directories.
-# This will be used to hardlink identical vanilla subdirs.
-sharedirs=$(find "$PWD" -maxdepth 1 -type d -name 'kernel-3.*' \
- | grep -x -v "$PWD"/kernel-%{kversion}%{?dist}) ||:
-
-if [ ! -d kernel-%{kversion}%{?dist}/vanilla-%{vanillaversion} ]; then
-
- if [ -d kernel-%{kversion}%{?dist}/vanilla-%{kversion} ]; then
-
- # The base vanilla version already exists.
- cd kernel-%{kversion}%{?dist}
-
- # Any vanilla-* directories other than the base one are stale.
- for dir in vanilla-*; do
- [ "$dir" = vanilla-%{kversion} ] || rm -rf $dir &
- done
-
- else
-
- rm -f pax_global_header
- # Look for an identical base vanilla dir that can be hardlinked.
- for sharedir in $sharedirs ; do
- if [[ ! -z $sharedir && -d $sharedir/vanilla-%{kversion} ]] ; then
- break
- fi
- done
- if [[ ! -z $sharedir && -d $sharedir/vanilla-%{kversion} ]] ; then
-%setup -q -n kernel-%{kversion}%{?dist} -c -T
- cp -rl $sharedir/vanilla-%{kversion} .
- else
-%setup -q -n kernel-%{kversion}%{?dist} -c
- mv linux-%{kversion} vanilla-%{kversion}
- fi
-
- fi
-
-%if "%{kversion}" != "%{vanillaversion}"
-
- for sharedir in $sharedirs ; do
- if [[ ! -z $sharedir && -d $sharedir/vanilla-%{vanillaversion} ]] ; then
- break
- fi
- done
- if [[ ! -z $sharedir && -d $sharedir/vanilla-%{vanillaversion} ]] ; then
-
- cp -rl $sharedir/vanilla-%{vanillaversion} .
-
- else
-
- # Need to apply patches to the base vanilla version.
- cp -rl vanilla-%{kversion} vanilla-%{vanillaversion}
- cd vanilla-%{vanillaversion}
-
-# Update vanilla to the latest upstream.
-# (non-released_kernel case only)
-%if 0%{?rcrev}
- ApplyPatch patch-3.%{upstream_sublevel}-rc%{rcrev}.bz2
-%if 0%{?gitrev}
- ApplyPatch patch-3.%{upstream_sublevel}-rc%{rcrev}-git%{gitrev}.bz2
-%endif
-%else
-# pre-{base_sublevel+1}-rc1 case
-%if 0%{?gitrev}
- ApplyPatch patch-3.%{base_sublevel}-git%{gitrev}.bz2
-%endif
-%endif
-
- cd ..
-
- fi
-
-%endif
-
-else
-
- # We already have all vanilla dirs, just change to the top-level directory.
- cd kernel-%{kversion}%{?dist}
-
-fi
-
-# Now build the fedora kernel tree.
-if [ -d linux-%{kversion}.%{_target_cpu} ]; then
- # Just in case we ctrl-c'd a prep already
- rm -rf deleteme.%{_target_cpu}
- # Move away the stale away, and delete in background.
- mv linux-%{kversion}.%{_target_cpu} deleteme.%{_target_cpu}
- rm -rf deleteme.%{_target_cpu} &
-fi
-
-cp -rl vanilla-%{vanillaversion} linux-%{kversion}.%{_target_cpu}
-
-cd linux-%{kversion}.%{_target_cpu}
-
-# released_kernel with possible stable updates
-%if 0%{?stable_base}
-ApplyPatch %{stable_patch_00}
-%endif
-%if 0%{?stable_rc}
-ApplyPatch %{stable_patch_01}
-%endif
-
-%if %{using_upstream_branch}
-### BRANCH APPLY ###
-%endif
-
-# Drop some necessary files from the source dir into the buildroot
-cp $RPM_SOURCE_DIR/config-* .
-cp %{SOURCE15} .
-
-# Dynamically generate kernel .config files from config-* files
-make -f %{SOURCE20} VERSION=%{version} configs
-
-%if %{?all_arch_configs:1}%{!?all_arch_configs:0}
-#if a rhel kernel, apply the rhel config options
-%if 0%{?rhel}
- for i in %{all_arch_configs}
- do
- mv $i $i.tmp
- ./merge.pl config-rhel-generic $i.tmp > $i
- rm $i.tmp
- done
-%endif
-
-# Merge in any user-provided local config option changes
-for i in %{all_arch_configs}
-do
- mv $i $i.tmp
- ./merge.pl %{SOURCE1000} $i.tmp > $i
- rm $i.tmp
-done
-%endif
-
-ApplyOptionalPatch git-linus.diff
-
-ApplyPatch linux-2.6-makefile-after_link.patch
-
-#
-# misc small stuff to make things compile
-#
-ApplyOptionalPatch linux-2.6-compile-fixes.patch
-
-%if !%{nopatches}
-
-# revert patches from upstream that conflict or that we get via other means
-ApplyOptionalPatch linux-2.6-upstream-reverts.patch -R
-
-
-# Architecture patches
-# x86(-64)
-
-#
-# ARM
-#
-ApplyPatch arm-omap-dt-compat.patch
-ApplyPatch arm-smsc-support-reading-mac-address-from-device-tree.patch
-
-ApplyPatch taint-vbox.patch
-#
-# NX Emulation
-#
-ApplyPatch linux-2.6-32bit-mmap-exec-randomization.patch
-ApplyPatch linux-2.6-i386-nx-emulation.patch
-
-#
-# bugfixes to drivers and filesystems
-#
-
-# ext4
-
-# xfs
-ApplyPatch xfs-Fix-possible-memory-corruption-in-xfs_readlink.patch
-
-# btrfs
-
-
-# eCryptfs
-
-# NFSv4
-
-# USB
-
-# WMI
-
-# ACPI
-ApplyPatch linux-2.6-defaults-acpi-video.patch
-ApplyPatch linux-2.6-acpi-video-dos.patch
-ApplyPatch linux-2.6-acpi-debug-infinite-loop.patch
-ApplyPatch acpi-ensure-thermal-limits-match-cpu-freq.patch
-ApplyPatch acpi-sony-nonvs-blacklist.patch
-
-# Various low-impact patches to aid debugging.
-ApplyPatch linux-2.6-debug-taint-vm.patch
-
-#
-# PCI
-#
-# enable ASPM by default on hardware we expect to work
-ApplyPatch linux-2.6-defaults-aspm.patch
-
-#
-# SCSI Bits.
-#
-
-# ACPI
-
-# ALSA
-
-# Networking
-
-
-# Misc fixes
-# The input layer spews crap no-one cares about.
-ApplyPatch linux-2.6-input-kill-stupid-messages.patch
-
-# stop floppy.ko from autoloading during udev...
-ApplyPatch die-floppy-die.patch
-ApplyPatch floppy-drop-disable_hlt-warning.patch
-
-ApplyPatch linux-2.6.30-no-pcspkr-modalias.patch
-
-# Allow to use 480600 baud on 16C950 UARTs
-ApplyPatch linux-2.6-serial-460800.patch
-
-# Silence some useless messages that still get printed with 'quiet'
-ApplyPatch linux-2.6-silence-noise.patch
-
-# Make fbcon not show the penguins with 'quiet'
-ApplyPatch linux-2.6-silence-fbcon-logo.patch
-
-# Changes to upstream defaults.
-
-
-# /dev/crash driver.
-ApplyPatch linux-2.6-crash-driver.patch
-
-# Hack e1000e to work on Montevina SDV
-ApplyPatch linux-2.6-e1000-ich9-montevina.patch
-
-# crypto/
-
-# Assorted Virt Fixes
-ApplyPatch fix_xen_guest_on_old_EC2.patch
-
-# DRM core
-
-# Nouveau DRM
-ApplyOptionalPatch drm-nouveau-updates.patch
-
-# Intel DRM
-ApplyOptionalPatch drm-intel-next.patch
-ApplyPatch drm-intel-make-lvds-work.patch
-ApplyPatch drm-i915-fbc-stfu.patch
-ApplyPatch drm-i915-sdvo-lvds-is-digital.patch
-
-ApplyPatch drm-lower-severity-radeon-lockup.diff
-
-ApplyPatch linux-2.6-intel-iommu-igfx.patch
-
-# silence the ACPI blacklist code
-ApplyPatch linux-2.6-silence-acpi-blacklist.patch
-
-# V4L/DVB updates/fixes/experimental drivers
-# apply if non-empty
-ApplyOptionalPatch linux-2.6-v4l-dvb-fixes.patch
-ApplyOptionalPatch linux-2.6-v4l-dvb-update.patch
-ApplyOptionalPatch linux-2.6-v4l-dvb-experimental.patch
-#ApplyPatch linux-2.6-v4l-dvb-uvcvideo-update.patch
-
-# Patches headed upstream
-ApplyPatch rcutree-avoid-false-quiescent-states.patch
-
-ApplyPatch disable-i8042-check-on-apple-mac.patch
-
-ApplyPatch add-appleir-usb-driver.patch
-
-ApplyPatch udlfb-bind-framebuffer-to-interface.patch
-ApplyPatch ums-realtek-driver-uses-stack-memory-for-DMA.patch
-ApplyPatch epoll-fix-spurious-lockdep-warnings.patch
-ApplyPatch epoll-limit-paths.patch
-ApplyPatch rcu-avoid-just-onlined-cpu-resched.patch
-ApplyPatch block-stray-block-put-after-teardown.patch
-ApplyPatch usb-add-quirk-for-logitech-webcams.patch
-
-ApplyPatch crypto-register-cryptd-first.patch
-
-# rhbz#605888
-ApplyPatch dmar-disable-when-ricoh-multifunction.patch
-
-ApplyPatch revert-efi-rtclock.patch
-ApplyPatch efi-dont-map-boot-services-on-32bit.patch
-
-ApplyPatch add-macbookair41-keyboard.patch
-
-ApplyPatch hvcs_pi_buf_alloc.patch
-
-ApplyPatch powerpc-Fix-deadlock-in-icswx-code.patch
-
-ApplyPatch iwlagn-fix-ht_params-NULL-pointer-dereference.patch
-
-#rhbz #722509
-ApplyPatch mmc-Always-check-for-lower-base-frequency-quirk-for-.patch
-
-ApplyPatch media-DiBcom-protect-the-I2C-bufer-access.patch
-ApplyPatch media-dib0700-protect-the-dib0700-buffer-access.patch
-ApplyPatch media-dib0700-correct-error-message.patch
-
-# utrace.
-ApplyPatch utrace.patch
-
-#rhbz #735946
-ApplyPatch 0001-mm-vmscan-Limit-direct-reclaim-for-higher-order-allo.patch
-ApplyPatch 0002-mm-Abort-reclaim-compaction-if-compaction-can-procee.patch
-
-#rhbz 748691
-ApplyPatch be2net-non-member-vlan-pkts-not-received-in-promisco.patch
-ApplyPatch benet-remove-bogus-unlikely-on-vlan-check.patch
-
-#rhbz 750402
-ApplyPatch oom-fix-integer-overflow-of-points.patch
-
-# END OF PATCH APPLICATIONS
-
-# BEGIN Planet-Lab Patches
-%(cat planetlab-patches.in)
-# END OF Planet-Lab Patches
-
-%endif
-
-# Any further pre-build tree manipulations happen here.
-
-chmod +x scripts/checkpatch.pl
-
-# This Prevents scripts/setlocalversion from mucking with our version numbers.
-touch .scmversion
-
-# only deal with configs if we are going to build for the arch
-%ifnarch %nobuildarches
-
-mkdir configs
-
-# Remove configs not for the buildarch
-for cfg in kernel-%{version}-*.config; do
- if [ `echo %{all_arch_configs} | grep -c $cfg` -eq 0 ]; then
- rm -f $cfg
- fi
-done
-
-%if !%{debugbuildsenabled}
-rm -f kernel-%{version}-*debug.config
-%endif
-
-# now run oldconfig over all the config files
-for i in *.config
-do
- mv $i .config
- Arch=`head -1 .config | cut -b 3-`
- make ARCH=$Arch listnewconfig | grep -E '^CONFIG_' >.newoptions || true
-%if %{listnewconfig_fail}
- if [ -s .newoptions ]; then
- cat .newoptions
- exit 1
- fi
-%endif
- rm -f .newoptions
- make ARCH=$Arch oldnoconfig
- echo "# $Arch" > configs/$i
- cat .config >> configs/$i
-done
-# end of kernel config
-%endif
-
-# get rid of unwanted files resulting from patch fuzz
-find . \( -name "*.orig" -o -name "*~" \) -exec rm -f {} \; >/dev/null
-
-# remove unnecessary SCM files
-find . -name .gitignore -exec rm -f {} \; >/dev/null
-
-cd ..
-
-###
-### build
-###
-%build
-
-%if %{with_sparse}
-%define sparse_mflags C=1
-%endif
-
-%if %{fancy_debuginfo}
-# This override tweaks the kernel makefiles so that we run debugedit on an
-# object before embedding it. When we later run find-debuginfo.sh, it will
-# run debugedit again. The edits it does change the build ID bits embedded
-# in the stripped object, but repeating debugedit is a no-op. We do it
-# beforehand to get the proper final build ID bits into the embedded image.
-# This affects the vDSO images in vmlinux, and the vmlinux image in bzImage.
-export AFTER_LINK=\
-'sh -xc "/usr/lib/rpm/debugedit -b $$RPM_BUILD_DIR -d /usr/src/debug \
- -i $@ > $@.id"'
-%endif
-
-cp_vmlinux()
-{
- eu-strip --remove-comment -o "$2" "$1"
-}
-
-BuildKernel() {
- MakeTarget=$1
- KernelImage=$2
- Flavour=$3
- InstallName=${4:-vmlinuz}
-
- # Pick the right config file for the kernel we're building
- Config=kernel-%{version}-%{_target_cpu}${Flavour:+-${Flavour}}.config
- DevelDir=/usr/src/kernels/%{KVERREL}${Flavour:+.${Flavour}}
-
- # When the bootable image is just the ELF kernel, strip it.
- # We already copy the unstripped file into the debuginfo package.
- if [ "$KernelImage" = vmlinux ]; then
- CopyKernel=cp_vmlinux
- else
- CopyKernel=cp
- fi
-
- KernelVer=%{version}-%{release}.%{_target_cpu}${Flavour:+.${Flavour}}
- echo BUILDING A KERNEL FOR ${Flavour} %{_target_cpu}...
-
- %if 0%{?stable_update}
- # make sure SUBLEVEL is incremented on a stable release. Sigh 3.x.
- perl -p -i -e "s/^SUBLEVEL.*/SUBLEVEL = %{?stablerev}/" Makefile
- %endif
-
- # make sure EXTRAVERSION says what we want it to say
- perl -p -i -e "s/^EXTRAVERSION.*/EXTRAVERSION = -%{release}.%{_target_cpu}${Flavour:+.${Flavour}}/" Makefile
-
- # if pre-rc1 devel kernel, must fix up PATCHLEVEL for our versioning scheme
- %if !0%{?rcrev}
- %if 0%{?gitrev}
- perl -p -i -e 's/^PATCHLEVEL.*/PATCHLEVEL = %{upstream_sublevel}/' Makefile
- %endif
- %endif
-
- # and now to start the build process
-
- make -s mrproper
- cp configs/$Config .config
-
- Arch=`head -1 .config | cut -b 3-`
- echo USING ARCH=$Arch
-
- make -s ARCH=$Arch oldnoconfig >/dev/null
- make -s ARCH=$Arch V=1 %{?_smp_mflags} $MakeTarget %{?sparse_mflags}
- make -s ARCH=$Arch V=1 %{?_smp_mflags} modules %{?sparse_mflags} || exit 1
-
- # Start installing the results
-%if %{with_debuginfo}
- mkdir -p $RPM_BUILD_ROOT%{debuginfodir}/boot
- mkdir -p $RPM_BUILD_ROOT%{debuginfodir}/%{image_install_path}
-%endif
- mkdir -p $RPM_BUILD_ROOT/%{image_install_path}
- install -m 644 .config $RPM_BUILD_ROOT/boot/config-$KernelVer
- install -m 644 System.map $RPM_BUILD_ROOT/boot/System.map-$KernelVer
-
- # We estimate the size of the initramfs because rpm needs to take this size
- # into consideration when performing disk space calculations. (See bz #530778)
- dd if=/dev/zero of=$RPM_BUILD_ROOT/boot/initramfs-$KernelVer.img bs=1M count=20
-
- if [ -f arch/$Arch/boot/zImage.stub ]; then
- cp arch/$Arch/boot/zImage.stub $RPM_BUILD_ROOT/%{image_install_path}/zImage.stub-$KernelVer || :
- fi
- $CopyKernel $KernelImage \
- $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer
- chmod 755 $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer
-
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer
- # Override $(mod-fw) because we don't want it to install any firmware
- # We'll do that ourselves with 'make firmware_install'
- make -s ARCH=$Arch INSTALL_MOD_PATH=$RPM_BUILD_ROOT modules_install KERNELRELEASE=$KernelVer mod-fw=
-%ifarch %{vdso_arches}
- make -s ARCH=$Arch INSTALL_MOD_PATH=$RPM_BUILD_ROOT vdso_install KERNELRELEASE=$KernelVer
- if [ ! -s ldconfig-kernel.conf ]; then
- echo > ldconfig-kernel.conf "\
-# Placeholder file, no vDSO hwcap entries used in this kernel."
- fi
- %{__install} -D -m 444 ldconfig-kernel.conf \
- $RPM_BUILD_ROOT/etc/ld.so.conf.d/kernel-$KernelVer.conf
-%endif
-
- # And save the headers/makefiles etc for building modules against
- #
- # This all looks scary, but the end result is supposed to be:
- # * all arch relevant include/ files
- # * all Makefile/Kconfig files
- # * all script/ files
-
- rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/source
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- (cd $RPM_BUILD_ROOT/lib/modules/$KernelVer ; ln -s build source)
- # dirs for additional modules per module-init-tools, kbuild/modules.txt
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/extra
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/updates
- # first copy everything
- cp --parents `find -type f -name "Makefile*" -o -name "Kconfig*"` $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp Module.symvers $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp System.map $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- if [ -s Module.markers ]; then
- cp Module.markers $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- fi
- # then drop all but the needed Makefiles/Kconfig files
- rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/Documentation
- rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts
- rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include
- cp .config $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a scripts $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- if [ -d arch/$Arch/scripts ]; then
- cp -a arch/$Arch/scripts $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/arch/%{_arch} || :
- fi
- if [ -f arch/$Arch/*lds ]; then
- cp -a arch/$Arch/*lds $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/arch/%{_arch}/ || :
- fi
- rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts/*.o
- rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts/*/*.o
-%ifarch ppc
- cp -a --parents arch/powerpc/lib/crtsavres.[So] $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
-%endif
- if [ -d arch/%{asmarch}/include ]; then
- cp -a --parents arch/%{asmarch}/include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- fi
- cp -a include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include
-
- # Make sure the Makefile and version.h have a matching timestamp so that
- # external modules can be built
- touch -r $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/Makefile $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include/linux/version.h
- touch -r $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/.config $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include/linux/autoconf.h
- # Copy .config to include/config/auto.conf so "make prepare" is unnecessary.
- cp $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/.config $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include/config/auto.conf
-
-%if %{fancy_debuginfo}
- if test -s vmlinux.id; then
- cp vmlinux.id $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/vmlinux.id
- else
- echo >&2 "*** ERROR *** no vmlinux build ID! ***"
- exit 1
- fi
-%endif
-
- #
- # save the vmlinux file for kernel debugging into the kernel-debuginfo rpm
- #
-%if %{with_debuginfo}
- mkdir -p $RPM_BUILD_ROOT%{debuginfodir}/lib/modules/$KernelVer
- cp vmlinux $RPM_BUILD_ROOT%{debuginfodir}/lib/modules/$KernelVer
-%endif
-
- find $RPM_BUILD_ROOT/lib/modules/$KernelVer -name "*.ko" -type f >modnames
-
- # mark modules executable so that strip-to-file can strip them
- xargs --no-run-if-empty chmod u+x < modnames
-
- # Generate a list of modules for block and networking.
-
- grep -F /drivers/ modnames | xargs --no-run-if-empty nm -upA |
- sed -n 's,^.*/\([^/]*\.ko\): *U \(.*\)$,\1 \2,p' > drivers.undef
-
- collect_modules_list()
- {
- sed -r -n -e "s/^([^ ]+) \\.?($2)\$/\\1/p" drivers.undef |
- LC_ALL=C sort -u > $RPM_BUILD_ROOT/lib/modules/$KernelVer/modules.$1
- }
-
- collect_modules_list networking \
- 'register_netdev|ieee80211_register_hw|usbnet_probe|phy_driver_register|rt2x00(pci|usb)_probe'
- collect_modules_list block \
- 'ata_scsi_ioctl|scsi_add_host|scsi_add_host_with_dma|blk_init_queue|register_mtd_blktrans|scsi_esp_register|scsi_register_device_handler'
- collect_modules_list drm \
- 'drm_open|drm_init'
- collect_modules_list modesetting \
- 'drm_crtc_init'
-
- # detect missing or incorrect license tags
- rm -f modinfo
- while read i
- do
- echo -n "${i#$RPM_BUILD_ROOT/lib/modules/$KernelVer/} " >> modinfo
- /sbin/modinfo -l $i >> modinfo
- done < modnames
-
- grep -E -v \
- 'GPL( v2)?$|Dual BSD/GPL$|Dual MPL/GPL$|GPL and additional rights$' \
- modinfo && exit 1
-
- rm -f modinfo modnames
-
- # remove files that will be auto generated by depmod at rpm -i time
- for i in alias alias.bin builtin.bin ccwmap dep dep.bin ieee1394map inputmap isapnpmap ofmap pcimap seriomap symbols symbols.bin usbmap
- do
- rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/modules.$i
- done
-
- # Move the devel headers out of the root file system
- mkdir -p $RPM_BUILD_ROOT/usr/src/kernels
- mv $RPM_BUILD_ROOT/lib/modules/$KernelVer/build $RPM_BUILD_ROOT/$DevelDir
- ln -sf ../../..$DevelDir $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
- # prune junk from kernel-devel
- find $RPM_BUILD_ROOT/usr/src/kernels -name ".*.cmd" -exec rm -f {} \;
-}
-
-###
-# DO it...
-###
-
-# prepare directories
-rm -rf $RPM_BUILD_ROOT
-mkdir -p $RPM_BUILD_ROOT/boot
-mkdir -p $RPM_BUILD_ROOT%{_libexecdir}
-
-cd linux-%{kversion}.%{_target_cpu}
-
-%if %{with_debug}
-BuildKernel %make_target %kernel_image debug
-%endif
-
-%if %{with_pae_debug}
-BuildKernel %make_target %kernel_image PAEdebug
-%endif
-
-%if %{with_pae}
-BuildKernel %make_target %kernel_image PAE
-%endif
-
-%if %{with_omap}
-BuildKernel %make_target %kernel_image omap
-%endif
-
-%if %{with_tegra}
-BuildKernel %make_target %kernel_image tegra
-%endif
-
-%if %{with_up}
-BuildKernel %make_target %kernel_image
-%endif
-
-%if %{with_smp}
-BuildKernel %make_target %kernel_image smp
-%endif
-
-%if %{with_tools}
-# perf
-make %{?_smp_mflags} -C tools/perf -s V=1 HAVE_CPLUS_DEMANGLE=1 prefix=%{_prefix} all
-make %{?_smp_mflags} -C tools/perf -s V=1 prefix=%{_prefix} man || %{doc_build_fail}
-
-%ifarch %{cpupowerarchs}
-# cpupower
-# make sure version-gen.sh is executable.
-chmod +x tools/power/cpupower/utils/version-gen.sh
-make %{?_smp_mflags} -C tools/power/cpupower CPUFREQ_BENCH=false
-%ifarch %{ix86}
- cd tools/power/cpupower/debug/i386
- make %{?_smp_mflags} centrino-decode powernow-k8-decode
- cd -
-%endif
-%ifarch x86_64
- cd tools/power/cpupower/debug/x86_64
- make %{?_smp_mflags} centrino-decode powernow-k8-decode
- cd -
-%endif
-%endif
-%endif
-
-%if %{with_doc}
-# Make the HTML and man pages.
-make htmldocs mandocs || %{doc_build_fail}
-
-# sometimes non-world-readable files sneak into the kernel source tree
-chmod -R a=rX Documentation
-find Documentation -type d | xargs chmod u+w
-%endif
-
-###
-### Special hacks for debuginfo subpackages.
-###
-
-# This macro is used by %%install, so we must redefine it before that.
-%define debug_package %{nil}
-
-%if %{fancy_debuginfo}
-%define __debug_install_post \
- /usr/lib/rpm/find-debuginfo.sh %{debuginfo_args} %{_builddir}/%{?buildsubdir}\
-%{nil}
-%endif
-
-%if %{with_debuginfo}
-%ifnarch noarch
-%global __debug_package 1
-%files -f debugfiles.list debuginfo-common-%{_target_cpu}
-%defattr(-,root,root)
-%endif
-%endif
-
-###
-### install
-###
-
-%install
-
-cd linux-%{kversion}.%{_target_cpu}
-
-%if %{with_doc}
-docdir=$RPM_BUILD_ROOT%{_datadir}/doc/kernel-doc-%{rpmversion}
-man9dir=$RPM_BUILD_ROOT%{_datadir}/man/man9
-
-# copy the source over
-mkdir -p $docdir
-tar -f - --exclude=man --exclude='.*' -c Documentation | tar xf - -C $docdir
-
-# Install man pages for the kernel API.
-mkdir -p $man9dir
-find Documentation/DocBook/man -name '*.9.gz' -print0 |
-xargs -0 --no-run-if-empty %{__install} -m 444 -t $man9dir $m
-ls $man9dir | grep -q '' || > $man9dir/BROKEN
-%endif # with_doc
-
-# We have to do the headers install before the tools install because the
-# kernel headers_install will remove any header files in /usr/include that
-# it doesn't install itself.
-
-%if %{with_headers}
-# Install kernel headers
-make ARCH=%{hdrarch} INSTALL_HDR_PATH=$RPM_BUILD_ROOT/usr headers_install
-
-# Do headers_check but don't die if it fails.
-make ARCH=%{hdrarch} INSTALL_HDR_PATH=$RPM_BUILD_ROOT/usr headers_check \
- > hdrwarnings.txt || :
-if grep -q exist hdrwarnings.txt; then
- sed s:^$RPM_BUILD_ROOT/usr/include/:: hdrwarnings.txt
- # Temporarily cause a build failure if header inconsistencies.
- # exit 1
-fi
-
-find $RPM_BUILD_ROOT/usr/include \
- \( -name .install -o -name .check -o \
- -name ..install.cmd -o -name ..check.cmd \) | xargs rm -f
-
-# glibc provides scsi headers for itself, for now
-rm -rf $RPM_BUILD_ROOT/usr/include/scsi
-rm -f $RPM_BUILD_ROOT/usr/include/asm*/atomic.h
-rm -f $RPM_BUILD_ROOT/usr/include/asm*/io.h
-rm -f $RPM_BUILD_ROOT/usr/include/asm*/irq.h
-%endif
-
-%if %{with_tools}
-# perf tool binary and supporting scripts/binaries
-make -C tools/perf -s V=1 DESTDIR=$RPM_BUILD_ROOT HAVE_CPLUS_DEMANGLE=1 prefix=%{_prefix} install
-
-# perf man pages (note: implicit rpm magic compresses them later)
-make -C tools/perf -s V=1 DESTDIR=$RPM_BUILD_ROOT HAVE_CPLUS_DEMANGLE=1 prefix=%{_prefix} install-man || %{doc_build_fail}
-
-%ifarch %{cpupowerarchs}
-make -C tools/power/cpupower DESTDIR=$RPM_BUILD_ROOT libdir=%{_libdir} mandir=%{_mandir} CPUFREQ_BENCH=false install
-rm -f %{buildroot}%{_libdir}/*.{a,la}
-%find_lang cpupower
-mv cpupower.lang ../
-%ifarch %{ix86}
- cd tools/power/cpupower/debug/i386
- install -m755 centrino-decode %{buildroot}%{_bindir}/centrino-decode
- install -m755 powernow-k8-decode %{buildroot}%{_bindir}/powernow-k8-decode
- cd -
-%endif
-%ifarch x86_64
- cd tools/power/cpupower/debug/x86_64
- install -m755 centrino-decode %{buildroot}%{_bindir}/centrino-decode
- install -m755 powernow-k8-decode %{buildroot}%{_bindir}/powernow-k8-decode
- cd -
-%endif
-chmod 0755 %{buildroot}%{_libdir}/libcpupower.so*
-mkdir -p %{buildroot}%{_unitdir} %{buildroot}%{_sysconfdir}/sysconfig
-install -m644 %{SOURCE2000} %{buildroot}%{_unitdir}/cpupower.service
-install -m644 %{SOURCE2001} %{buildroot}%{_sysconfdir}/sysconfig/cpupower
-%endif
-
-%endif
-
-%if %{with_bootwrapper}
-make DESTDIR=$RPM_BUILD_ROOT bootwrapper_install WRAPPER_OBJDIR=%{_libdir}/kernel-wrapper WRAPPER_DTSDIR=%{_libdir}/kernel-wrapper/dts
-%endif
-
-
-###
-### clean
-###
-
-%clean
-rm -rf $RPM_BUILD_ROOT
-
-###
-### scripts
-###
-
-%if %{with_tools}
-%post -n kernel-tools
-/sbin/ldconfig
-
-%postun -n kernel-tools
-/sbin/ldconfig
-%endif
-
-#
-# This macro defines a %%post script for a kernel*-devel package.
-# %%kernel_devel_post [<subpackage>]
-#
-%define kernel_devel_post() \
-%{expand:%%post %{?1:%{1}-}devel}\
-if [ -f /etc/sysconfig/kernel ]\
-then\
- . /etc/sysconfig/kernel || exit $?\
-fi\
-if [ "$HARDLINK" != "no" -a -x /usr/sbin/hardlink ]\
-then\
- (cd /usr/src/kernels/%{KVERREL}%{?1:.%{1}} &&\
- /usr/bin/find . -type f | while read f; do\
- hardlink -c /usr/src/kernels/*.fc*.*/$f $f\
- done)\
-fi\
-%{nil}
-
-
-# This macro defines a %%posttrans script for a kernel package.
-# %%kernel_variant_posttrans [<subpackage>]
-# More text can follow to go at the end of this variant's %%post.
-#
-%define kernel_variant_posttrans() \
-%{expand:%%posttrans %{?1}}\
-/sbin/new-kernel-pkg --package kernel%{?-v:-%{-v*}} --mkinitrd --dracut --depmod --update %{KVERREL}%{?-v:.%{-v*}} || exit $?\
-/sbin/new-kernel-pkg --package kernel%{?1:-%{1}} --rpmposttrans %{KVERREL}%{?1:.%{1}} || exit $?\
-pushd /boot || exit $?\
-/bin/ln -sf config-%{KVERREL}%{?1:.%{1}} config || exit $?\
-/bin/ln -sf config-%{KVERREL}%{?1:.%{1}} configsmp || exit $?\
-/bin/ln -sf initrd-%{KVERREL}%{?1:.%{1}}.img initrd-boot || exit $?\
-/bin/ln -sf initrd-%{KVERREL}%{?1:.%{1}}.img initrd-bootsmp || exit $?\
-/bin/ln -sf vmlinuz-%{KVERREL}%{?1:.%{1}} kernel-boot || exit $?\
-/bin/ln -sf vmlinuz-%{KVERREL}%{?1:.%{1}} kernel-bootsmp || exit $?\
-popd || exit $?\
-/bin/mkdir -p /etc/planetlab || exit $?\
-/bin/touch /etc/planetlab/update-reboot || exit $?\
-%{nil}
-
-#
-# This macro defines a %%post script for a kernel package and its devel package.
-# %%kernel_variant_post [-v <subpackage>] [-r <replace>]
-# More text can follow to go at the end of this variant's %%post.
-#
-%define kernel_variant_post(v:r:) \
-%{expand:%%kernel_devel_post %{?-v*}}\
-%{expand:%%kernel_variant_posttrans %{?-v*}}\
-%{expand:%%post %{?-v*}}\
-%{-r:\
-if [ `uname -i` == "x86_64" -o `uname -i` == "i386" ] &&\
- [ -f /etc/sysconfig/kernel ]; then\
- /bin/sed -r -i -e 's/^DEFAULTKERNEL=%{-r*}$/DEFAULTKERNEL=kernel%{?-v:-%{-v*}}/' /etc/sysconfig/kernel || exit $?\
-fi}\
-%{expand:\
-/sbin/new-kernel-pkg --package kernel%{?-v:-%{-v*}} --install %{KVERREL}%{?-v:.%{-v*}} || exit $?\
-}\
-%{nil}
-
-#
-# This macro defines a %%preun script for a kernel package.
-# %%kernel_variant_preun <subpackage>
-#
-%define kernel_variant_preun() \
-%{expand:%%preun %{?1}}\
-/sbin/new-kernel-pkg --rminitrd --rmmoddep --remove %{KVERREL}%{?1:.%{1}} || exit $?\
-%{nil}
-
-%kernel_variant_preun
-%kernel_variant_post -r kernel-smp
-
-%kernel_variant_preun smp
-%kernel_variant_post -v smp
-
-%kernel_variant_preun PAE
-%kernel_variant_post -v PAE -r (kernel|kernel-smp)
-
-%kernel_variant_preun debug
-%kernel_variant_post -v debug
-
-%kernel_variant_post -v PAEdebug -r (kernel|kernel-smp)
-%kernel_variant_preun PAEdebug
-
-%kernel_variant_preun omap
-%kernel_variant_post -v omap
-
-%kernel_variant_preun tegra
-%kernel_variant_post -v tegra
-
-pushd /boot || exit $?
-/bin/ln -sf config-%{KVERREL}%{?1:.%{1}} config || exit $?
-/bin/ln -sf config-%{KVERREL}%{?1:.%{1}} configsmp || exit $?
-/bin/ln -sf initrd-%{KVERREL}%{?1:.%{1}}.img initrd-boot || exit $?
-/bin/ln -sf initrd-%{KVERREL}%{?1:.%{1}}.img initrd-bootsmp || exit $?
-/bin/ln -sf vmlinuz-%{KVERREL}%{?1:.%{1}} kernel-boot || exit $?
-/bin/ln -sf vmlinuz-%{KVERREL}%{?1:.%{1}} kernel-bootsmp || exit $?
-popd || exit $?
-/bin/mkdir -p /etc/planetlab || exit $?
-/bin/touch /etc/planetlab/update-reboot || exit $?
-
-if [ -x /sbin/ldconfig ]
-then
- /sbin/ldconfig -X || exit $?
-fi
-
-###
-### file lists
-###
-
-%if %{with_headers}
-%files headers
-%defattr(-,root,root)
-/usr/include/*
-%endif
-
-%if %{with_bootwrapper}
-%files bootwrapper
-%defattr(-,root,root)
-/usr/sbin/*
-%{_libdir}/kernel-wrapper
-%endif
-
-# only some architecture builds need kernel-doc
-%if %{with_doc}
-%files doc
-%defattr(-,root,root)
-%{_datadir}/doc/kernel-doc-%{rpmversion}/Documentation/*
-%dir %{_datadir}/doc/kernel-doc-%{rpmversion}/Documentation
-%dir %{_datadir}/doc/kernel-doc-%{rpmversion}
-%{_datadir}/man/man9/*
-%endif
-
-%if %{with_tools}
-%files -n kernel-tools -f cpupower.lang
-%defattr(-,root,root)
-%{_bindir}/perf
-%dir %{_libexecdir}/perf-core
-%{_libexecdir}/perf-core/*
-%{_mandir}/man[1-8]/*
-
-%ifarch %{cpupowerarchs}
-%{_bindir}/cpupower
-%ifarch %{ix86} x86_64
-%{_bindir}/centrino-decode
-%{_bindir}/powernow-k8-decode
-%endif
-%{_libdir}/libcpupower.so.0
-%{_libdir}/libcpupower.so.0.0.0
-%{_unitdir}/cpupower.service
-%config(noreplace) %{_sysconfdir}/sysconfig/cpupower
-%endif
-
-%if %{with_debuginfo}
-%files -f kernel-tools-debuginfo.list -n kernel-tools-debuginfo
-%defattr(-,root,root)
-%endif
-
-%ifarch %{cpupowerarchs}
-%files -n kernel-tools-devel
-%{_libdir}/libcpupower.so
-%{_includedir}/cpufreq.h
-%endif
-%endif
-
-# This is %%{image_install_path} on an arch where that includes ELF files,
-# or empty otherwise.
-%define elf_image_install_path %{?kernel_image_elf:%{image_install_path}}
-
-#
-# This macro defines the %%files sections for a kernel package
-# and its devel and debuginfo packages.
-# %%kernel_variant_files [-k vmlinux] <condition> <subpackage>
-#
-%define kernel_variant_files(k:) \
-%if %{1}\
-%{expand:%%files %{?2}}\
-%defattr(-,root,root)\
-/%{image_install_path}/%{?-k:%{-k*}}%{!?-k:vmlinuz}-%{KVERREL}%{?2:.%{2}}\
-%attr(600,root,root) /boot/System.map-%{KVERREL}%{?2:.%{2}}\
-/boot/config-%{KVERREL}%{?2:.%{2}}\
-%dir /lib/modules/%{KVERREL}%{?2:.%{2}}\
-/lib/modules/%{KVERREL}%{?2:.%{2}}/kernel\
-/lib/modules/%{KVERREL}%{?2:.%{2}}/build\
-/lib/modules/%{KVERREL}%{?2:.%{2}}/source\
-/lib/modules/%{KVERREL}%{?2:.%{2}}/extra\
-/lib/modules/%{KVERREL}%{?2:.%{2}}/updates\
-%ifarch %{vdso_arches}\
-/lib/modules/%{KVERREL}%{?2:.%{2}}/vdso\
-/etc/ld.so.conf.d/kernel-%{KVERREL}%{?2:.%{2}}.conf\
-%endif\
-/lib/modules/%{KVERREL}%{?2:.%{2}}/modules.*\
-%ghost /boot/initramfs-%{KVERREL}%{?2:.%{2}}.img\
-%{expand:%%files %{?2:%{2}-}devel}\
-%defattr(-,root,root)\
-/usr/src/kernels/%{KVERREL}%{?2:.%{2}}\
-%if %{with_debuginfo}\
-%ifnarch noarch\
-%if %{fancy_debuginfo}\
-%{expand:%%files -f debuginfo%{?2}.list %{?2:%{2}-}debuginfo}\
-%else\
-%{expand:%%files %{?2:%{2}-}debuginfo}\
-%endif\
-%defattr(-,root,root)\
-%if !%{fancy_debuginfo}\
-%if "%{elf_image_install_path}" != ""\
-%{debuginfodir}/%{elf_image_install_path}/*-%{KVERREL}%{?2:.%{2}}.debug\
-%endif\
-%{debuginfodir}/lib/modules/%{KVERREL}%{?2:.%{2}}\
-%{debuginfodir}/usr/src/kernels/%{KVERREL}%{?2:.%{2}}\
-%endif\
-%endif\
-%endif\
-%endif\
-%{nil}
-
-
-%kernel_variant_files %{with_up}
-%kernel_variant_files %{with_smp} smp
-%kernel_variant_files %{with_debug} debug
-%kernel_variant_files %{with_pae} PAE
-%kernel_variant_files %{with_pae_debug} PAEdebug
-%kernel_variant_files %{with_omap} omap
-%kernel_variant_files %{with_tegra} tegra
-
-# plz don't put in a version string unless you're going to tag
-# and build.
-
-%changelog
-* Tue Nov 1 2011 Josh Boyer <jwboyer@redhat.com> 3.1.0-7
-- Drop x86-efi-Calling-__pa-with-an-ioremap-address-is-invalid (rhbz 748516)
-
-* Mon Oct 31 2011 Josh Boyer <jwboyer@redhat.com>
-- CVE-2011-4097: oom_badness() integer overflow (rhbz 750402)
-
-* Fri Oct 28 2011 Josh Boyer <jwboyer@redhat.com>
-- Add patch to prevent tracebacks on a warning in floppy.c (rhbz 749887)
-
-* Wed Oct 26 2011 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 3.1.0-5
-- Rebuilt for glibc bug#747377
-
-* Wed Oct 26 2011 Josh Boyer <jwboyer@redhat.com>
-- CVE-2011-4077: xfs: potential buffer overflow in xfs_readlink() (rhbz 749166)
-
-* Tue Oct 25 2011 Josh Boyer <jwboyer@redhat.com>
-- CVE-2011-3347: be2net: promiscuous mode and non-member VLAN packets DoS (rhbz 748691)
-- CVE-2011-1083: excessive in kernel CPU consumption when creating large nested epoll structures (rhbz 748668)
-
-* Mon Oct 24 2011 Josh Boyer <jwboyer@redhat.com>
-- Backport 3 fixed from linux-next to fix dib0700 playback (rhbz 733827)
-
-* Mon Oct 24 2011 Chuck Ebbert <cebbert@redhat.com> 3.1.0-1
-- Linux 3.1
-
-* Fri Oct 21 2011 Chuck Ebbert <cebbert@redhat.com> 3.1.0-0.rc10.git1.1
-- Update to upstream HEAD (v3.1-rc10-42-g2efd7c0)
-
-* Fri Oct 21 2011 Dave Jones <davej@redhat.com>
-- Lower severity of Radeon lockup messages.
-
-* Wed Oct 19 2011 Dave Jones <davej@redhat.com>
-- Add Sony VGN-FW21E to nonvs blacklist. (rhbz 641789)
-
-* Wed Oct 19 2011 Chuck Ebbert <cebbert@redhat.com> 3.1.0-0.rc10.git0.1
-- Fix divide-by-zero in nouveau driver (rhbz #747129)
-
-* Tue Oct 18 2011 Chuck Ebbert <cebbert@redhat.com>
-- Fix lock inversion causing hangs in 3.1-rc9 (rhbz #746485)
-- Linux 3.1-rc10
-
-* Tue Oct 18 2011 Josh Boyer <jwboyer@redhat.com>
-- Add patch to fix invalid EFI remap calls from Matt Fleming
-
-* Mon Oct 17 2011 Josh Boyer <jwboyer@redhat.com>
-- Add two patches to fix stalls in khugepaged (rhbz 735946)
-
-* Thu Oct 13 2011 Josh Boyer <jwboyer@redhat.com>
-- Update usb-add-quirk-for-logitech-webcams.patch with C600 ID (rhbz 742010)
-
-* Thu Oct 13 2011 Adam Jackson <ajax@redhat.com>
-- drm/i915: Treat SDVO LVDS as digital when parsing EDID (#729882)
-
-* Thu Oct 13 2011 Josh Boyer <jwboyer@redhat.com>
-- Add patch from Stanislaw Gruszka to fix iwlagn NULL dereference (rhbz 744155)
-
-* Tue Oct 11 2011 Josh Boyer <jwboyer@redhat.com>
-- Disable CONFIG_XEN_BALLOON_MEMORY_HOTPLUG (rhbz 744408)
-
-* Thu Oct 06 2011 Josh Boyer <jwboyer@redhat.com>
-- Add patch to fix base frequency check for Ricoh e823 devices (rhbz 722509)
-
-* Thu Oct 06 2011 Dave Jones <davej@redhat.com>
-- Taint if virtualbox modules have been loaded.
-
-* Wed Oct 05 2011 Chuck Ebbert <cebbert@redhat.com> 3.1.0-0.rc9.git0.0
-- Linux 3.1-rc9
-
-* Mon Oct 03 2011 Chuck Ebbert <cebbert@redhat.com> 3.1.0-0.rc8.git0.1
-- block: Free queue resources at blk_release_queue()
-
-* Thu Sep 29 2011 Chuck Ebbert <cebbert@redhat.com>
-- Require grubby >= 8.3-1 so initrd line gets added (rhbz #725185)
-
-* Thu Sep 29 2011 Josh Boyer <jwboyer@redhat.com>
-- Update logitech USB quirk patch
-
-* Tue Sep 27 2011 Chuck Ebbert <cebbert@redhat.com> 3.1.0-0.rc8.git0.0
-- Linux 3.1-rc8
-- New option: CONFIG_ARM_ERRATA_764369 is not set
-- Fix up utrace.patch to apply after commit f9d81f61c
-
-* Thu Sep 22 2011 Dave Jones <davej@redhat.com>
-- Make CONFIG_XEN_PLATFORM_PCI=y (rhbz 740664)
-
-* Thu Sep 22 2011 Dennis Gilmore <dennis@ausil.us>
-- build vmlinux image for sparc64
-
-* Wed Sep 21 2011 Josh Boyer <jwboyer@redhat.com>
-- Linux 3.1-rc7
-
-* Tue Sep 20 2011 Dave Jones <davej@redhat.com>
-- Limit 32-bit x86 kernels to 32 processors.
-
-* Tue Sep 20 2011 Ben Skeggs <bskeggs@redhat.com> 3.1.0-0.rc6.git0.4.fc16
-- nouveau: patch in updates queued for 3.2, mostly new hw support (GF116/GF119)
-
-* Fri Sep 16 2011 Josh Boyer <jwboyer@redhat.com> 3.1.0-0.rc6.git0.3.fc16
-- Add patch to fix deadlock in ipw2x00 (rhbz 738387)
-- Fixup kernel-tools file section for ppc/ppc64
-
-* Thu Sep 15 2011 Josh Boyer <jwboyer@redhat.com>
-- CVE-2011-3191: cifs: fix possible memory corruption in CIFSFindNext
-
-* Wed Sep 14 2011 Josh Boyer <jwboyer@redhat.com>
-- Add patch to fix deadlock in ppc64 icswx (rhbz 737984)
-
-* Wed Sep 14 2011 Neil Horman <nhorman@redhat.com>
-- Enable CONFIG_IP_VS_IPV6 (bz 738194)
-
-* Wed Sep 14 2011 Josh Boyer <jwboyer@redhat.com>
-- Add support for Macbook Air 4,1 keyboard, trackpad, and bluetooth
-- Add patch to fix HVCS on ppc64 (rhbz 738096)
-- Add various ibmveth driver fixes (rhbz 733766)
-
-* Tue Sep 13 2011 Adam Jackson <ajax@redhat.com>
-- drm/i915: Shut the fbc messages up when drm.debug & 4
-
-* Mon Sep 12 2011 Josh Boyer <jwboyer@redhat.com> 3.1.0-0.rc6.git0.0
-- Linux 3.1-rc6 (contains the fix for 737076)
-- Disable debug builds
-
-* Fri Sep 09 2011 Josh Boyer <jwboyer@redhat.com>
-- Change to 64K page size for ppc64 kernels (rhbz 736751)
-
-* Fri Sep 09 2011 Josh Boyer <jwboyer@redhat.com> 3.1.0-0.rc5.git0.0
-- Linux 3.1-rc5
-
-* Wed Sep 07 2011 Josh Boyer <jwboyer@redhat.com>
-- Add patch to fix oops when linking entities in ucvideo (rhbz 735437)
-
-* Fri Sep 02 2011 Dave Jones <davej@redhat.com>
-- Apply patch to fix lockdep reports from ext4 (rhbz 732572)
-
-* Thu Sep 01 2011 Dave Jones <davej@redhat.com>
-- utrace: s390: fix the compile problem with traps.c (rhbz 735118)
-
-* Tue Aug 30 2011 Dave Jones <davej@redhat.com>
-- Revert "x86: Serialize EFI time accesses on rtc_lock" (rhbz 732755)
-
-* Tue Aug 30 2011 Josh Boyer <jwboyer@redhat.com>
-- Add patch to fix rhbz 606017
-
-* Mon Aug 29 2011 Josh Boyer <jwboyer@redhat.com>
-- Linux 3.1-rc4
-
-* Sat Aug 27 2011 Dave Jones <davej@redhat.com>
-- Fix get_gate_vma usage in i386 NX emulation
-- Bring back the 32bit mmap randomization patch for now.
- NX emulation is still too dependant upon it.
-
-* Fri Aug 26 2011 Dave Jones <davej@redhat.com>
-- Enable CONFIG_DETECT_HUNG_TASK for debug builds & rawhide.
-
-* Fri Aug 26 2011 Dave Jones <davej@redhat.com>
-- Drop linux-2.6-debug-vm-would-have-oomkilled.patch
- The oom-killer heuristics have improved enough that this should
- never be necessary (and it probably doesn't dtrt any more)
-
-* Fri Aug 26 2011 Dave Jones <davej@redhat.com>
-- Drop linux-2.6-32bit-mmap-exec-randomization.patch
- Outlived it's usefulness (and made of ugly)
-
-* Fri Aug 26 2011 Dave Jones <davej@redhat.com>
-- Drop acpi-ec-add-delay-before-write.patch (rhbz 733690)
-
-* Fri Aug 26 2011 Josh Boyer <jwboyer@redhat.com>
-- Linux 3.1-rc3-git5
-
-* Wed Aug 24 2011 Josh Boyer <jwboyer@redhat.com>
-- Revert 'iwlwifi: advertise max aggregate size'. (rhbz 708747)
-
-* Mon Aug 22 2011 Josh Boyer <jwboyer@redhat.com>
-- Linux 3.1-rc3
-- Add patch to fix duplicate backlight registration (rhbz 732202)
-
-* Mon Aug 22 2011 Dave Jones <davej@redhat.com>
-- Avoid false quiescent states in rcutree with CONFIG_RCU_FAST_NO_HZ. (rhbz 577968)
-
-* Sat Aug 20 2011 Josh Boyer <jwboyer@redhat.com>
-- Linux 3.1-rc2-git7
-- Add a provides/obsoletes for cpupowerutils-devel
-
-* Fri Aug 19 2011 Josh Boyer <jwboyer@redhat.com>
-- Add patch from upstream to fix 64-bit divide error in btrfs
-- Add BuildRequires on gettext for cpupowerutils translations
-
-* Fri Aug 19 2011 Josh Boyer <jwboyer@redhat.com>
-- Linux 3.1-rc2-git5
-- Change XHCI to builtin (rhbz 731706)
-- Add patch to fix race between cryptd and aesni (rhbz 721002)
-
-* Thu Aug 18 2011 Josh Boyer <jwboyer@redhat.com>
-- Adjust provides/obsoletes to replace the cpupowerutils package
-
-* Wed Aug 17 2011 Josh Boyer <jwboyer@redhat.com>
-- Create the kernel-tools subpackages based on a start by davej
-
-* Tue Aug 16 2011 Dave Jones <davej@redhat.com>
-- Prepare for packaging more of tools/ by renaming 'perf' subpackage
- to kernel-tools
-
-* Tue Aug 16 2011 Dennis Gilmore <dennis@ausil.us>
-- add config for arm tegra devices
-- setup kernel to build omap image (patch from David Marlin)
-- setup kernel to build tegra image based on omap work
-- add arm device tree patches
-
-* Sat Aug 13 2011 Dave Jones <davej@redhat.com>
-- CPU_FREQ drivers should now be built-in on x86-64.
-
-* Thu Aug 11 2011 Josh Boyer <jwboyer@redhat.com>
-- Add patch davej applied to f15 for rhbz 729340
-- Add munged together patch for rhbz 729269
-- Build ide_pmac as a module (rhbz 730039)
-
-* Tue Aug 09 2011 Josh Boyer <jwboyer@redhat.com>
-- Add Makefile.config and ARM config changes from David Marlin
-
-* Tue Aug 09 2011 Josh Boyer <jwboyer@redhat.com>
-- Add patch davej applied to f15 for rhbz 728872
-
-* Tue Aug 09 2011 Dave Jones <davej@redhat.com>
-- ptrace_report_syscall: check if TIF_SYSCALL_EMU is defined
-
-* Tue Aug 09 2011 Dave Jones <davej@redhat.com>
-- Enable CONFIG_SAMSUNG_LAPTOP (rhbz 729363)
-
-* Mon Aug 08 2011 Josh Boyer <jwboyer@redhat.com>
-- Bring in utrace fixes davej applied to f15. (rhbz 728379)
-
-* Fri Aug 05 2011 Josh Boyer <jwboyer@redhat.com>
-- Adjust Makefile munging for new 3.x numbering scheme
-
-* Fri Aug 05 2011 Dave Jones <davej@redhat.com>
-- Deselect CONFIG_DECNET. Unmaintained, and rubbish.
-
-* Fri Aug 05 2011 Josh Boyer <jwboyer@redhat.com>
-- 3.0.1
-
-* Fri Aug 05 2011 Josh Boyer <jwboyer@redhat.com>
-- Add patch for rhbz 726701 from Matthew Garrett
-
-* Thu Aug 04 2011 Dave Jones <davej@redhat.com>
-- Drop neuter_intel_microcode_load.patch (rhbz 690930)
-
-* Wed Aug 03 2011 John W. Linville <linville@redhat.com>
-- Disable CONFIG_BCMA since no driver currently uses it (rhbz 727796)
-
-* Wed Aug 03 2011 Josh Boyer <jwboyer@redhat.com>
-- Add patch to fix backtrace in cdc_ncm driver (rhbz 720128)
-- Add patch to fix backtrace in usm-realtek driver (rhbz 720054)
-
-* Tue Aug 02 2011 Josh Boyer <jwboyer@redhat.com>
-- Add patch to fix HFSPlus filesystem mounting (rhbz 720771)
-
-* Tue Aug 02 2011 Dave Jones <davej@redhat.com>
-- Change USB_SERIAL_OPTION back to modular. (rhbz 727680)
-
-* Tue Aug 02 2011 Josh Boyer <jwboyer@redhat.com>
-- Fix epoll recursive lockdep warnings (rhbz 722472)
-- Turn debug builds back on
-
-* Tue Aug 02 2011 Josh Boyer <jwboyer@redhat.com>
-- Add change from Yanko Kaneti to get the rt2x00 drivers in modules.networking
- (rhbz 708314)
-
-* Fri Jul 29 2011 Dave Jones <davej@redhat.com>
-- Fix scsi_dispatch_cmd oops (USB eject problems, etc).
-
-* Thu Jul 28 2011 Dave Jones <davej@redhat.com>
-- module-init-tools needs to be a prereq, not a conflict.
-
-* Thu Jul 28 2011 Josh Boyer <jwboyer@redhat.com>
-- Backport patch to correct udlfb removal events (rhbz 726163)
-
-* Wed Jul 27 2011 Dave Jones <davej@redhat.com>
-- Turn off debug builds.
-
-* Fri Jul 22 2011 Dave Jones <davej@redhat.com>
-- bootwrapper needs objcopy. Add it to requires: (wwoods)
-
-* Fri Jul 22 2011 Kyle McMartin <kmcmartin@redhat.com> 3.0.0-1
-- Linux 3.0, but really 3.0.0 (sigh)
-
-* Thu Jul 21 2011 Chuck Ebbert <cebbert@redhat.com> 3.0-0.rc7.git10.1
-- 3.0-rc7-git10
-- Use ext4 for ext2 and ext3 filesystems (CONFIG_EXT4_USE_FOR_EXT23=y)
-
-* Thu Jul 21 2011 Dave Jones <davej@redhat.com>
-- Switch BLK_DEV_RAM to be modular (rhbz 720833)
-
-* Wed Jul 20 2011 Chuck Ebbert <cebbert@redhat.com> 3.0-0.rc7.git8.1
-- 3.0-rc7-git8
-
-* Fri Jul 15 2011 Dave Jones <davej@redhat.com> 3.0-0.rc7.git3.1
-- 3.0-rc7-git3
-
-* Fri Jul 15 2011 Dave Jones <davej@redhat.com>
-- Bring back utrace until uprobes gets merged upstream.
-
-* Wed Jul 13 2011 Kyle McMartin <kmcmartin@redhat.com> 3.0-0.rc7.git1.1
-- Update to snapshot 3.0-rc7-git1 for intel drm fixes.
-
-* Tue Jul 12 2011 John W. Linville <linville@redhat.com>
-- zd1211rw: fix invalid signal values from device (rhbz 720093)
-
-* Tue Jul 12 2011 John W. Linville <linville@redhat.com>
-- rt2x00: Add device ID for RT539F device. (rhbz 720594)
-
-* Tue Jul 12 2011 Kyle McMartin <kmcmartin@redhat.com> 3.0-0.rc7.git0.1
-- Linux 3.0-rc7, hopefully the last before the Great Renumbering becomes
- official.
-
-* Mon Jul 11 2011 Dave Jones <davej@redhat.com>
-- Change BINFMT_MISC to be modular. (rhbz 695415)
-
-* Sun Jul 10 2011 Kyle McMartin <kmcmartin@redhat.com> 3.0-0.rc6.git6.1
-- Linux 3.0-rc6-git6
-- iwlagn-fix-dma-direction.patch: drop.
-- Revert CONFIG_X86_RESERVE_LOW=640, it breaks booting on x86_64.
-
-* Thu Jul 07 2011 Dave Jones <davej@redhat.com>
-- Centralise CPU_FREQ options into config-generic.
- Switch to using ondemand by default. (rhbz 713572)
-
-* Wed Jul 06 2011 Chuck Ebbert <cebbert@redhat.com>
-- Set CONFIG_X86_RESERVE_LOW=640 as requested by mjg
-
-* Mon Jul 04 2011 Kyle McMartin <kmcmartin@redhat.com> 3.0-0.rc6.git0.1
-- Linux 3.0-rc6
-- [generic] SCSI_ISCI=m, because why not
-
-* Sat Jul 02 2011 Kyle McMartin <kmcmartin@redhat.com> 3.0-0.rc5.git5.1
-- Linux 3.0-rc5-git5
-
-* Mon Jun 27 2011 Kyle McMartin <kmcmartin@redhat.com> 3.0-0.rc5.git0.1
-- Linux 3.0-rc5
-
-* Mon Jun 27 2011 Dave Jones <davej@redhat.com>
-- Disable CONFIG_CRYPTO_MANAGER_DISABLE_TESTS, as this also disables FIPS (rhbz 716942)
-
-* Thu Jun 23 2011 Kyle McMartin <kmcmartin@redhat.com> 3.0-0.rc4.git3.1
-- Linux 3.0-rc4-git3
-- Drop linux-3.0-fix-uts-release.patch, and instead just perl the Makefile
-- linux-2.6-silence-noise.patch: fix context
-- iwlagn-fix-dma-direction.patch: fix DMAR errors (for me at least)
-
-* Wed Jun 22 2011 Kyle McMartin <kmcmartin@redhat.com> 3.0-0.rc4.git0.2
-- Re-enable debuginfo generation. Thanks to Richard Jones for noticing... no
- wonder builds had been so quick lately.
-
-* Tue Jun 21 2011 Kyle McMartin <kmcmartin@redhat.com> 3.0-0.rc4.git0.1
-- Linux 3.0-rc4 (getting closer...)
-
-* Fri Jun 17 2011 Kyle McMartin <kmcmartin@redhat.com> 3.0-0.rc3.git6.1
-- Update to 3.0-rc3-git6
-
-* Fri Jun 17 2011 Dave Jones <davej@redhat.com>
-- drop qcserial 'compile fix' that was just duplicating an include.
-- drop struct sizeof debug patch. (no real value. not upstreamable)
-- drop linux-2.6-debug-always-inline-kzalloc.patch.
- Can't recall why this was added. Can easily re-add if deemed necessary.
-
-* Fri Jun 17 2011 Kyle McMartin <kmcmartin@redhat.com>
-- linux-2.6-defaults-pci_no_msi.patch: drop, haven't toggled the default
- in many moons.
-- linux-2.6-defaults-pci_use_crs.patch: ditto.
-- linux-2.6-selinux-mprotect-checks.patch: upstream a while ago.
-- drm-i915-gen4-has-non-power-of-two-strides.patch: drop buggy bugfix
-- drop some more unapplied crud.
-- We haven't applied firewire patches in a dogs age.
-
-* Fri Jun 17 2011 Kyle McMartin <kmcmartin@redhat.com> 3.0-0.rc3.git5.1
-- Try updating to a git snapshot for the first time in 3.0-rc,
- update to 3.0-rc3-git5
-- Fix a subtle bug I introduced in 3.0-rc1, "patch-3." is 9 letters, not 10.
-
-* Thu Jun 16 2011 Kyle McMartin <kmcmartin@redhat.com>
-- Disable mm patches which had been submitted against 2.6.39, as Rik reports
- they seem to aggravate a VM_BUG_ON. More investigation is necessary.
-
-* Wed Jun 15 2011 Kyle McMartin <kmcmartin@redhat.com>
-- Conflict with pre-3.2.1-5 versions of mdadm. (#710646)
-
-* Wed Jun 15 2011 Kyle McMartin <kmcmartin@redhat.com>
-- Build in aesni-intel on i686 for symmetry with 64-bit.
-
-* Tue Jun 14 2011 Kyle McMartin <kmcmartin@redhat.com> 3.0-0.rc3.git0.3
-- Fix libdm conflict (whose bright idea was it to give subpackages differing
- version numbers?)
-
-* Tue Jun 14 2011 Kyle McMartin <kmcmartin@redhat.com>
-- Update to 3.0-rc3, add another conflicts to deal with 2 digit
- versions (libdm.)
-- Simplify linux-3.0-fix-uts-release.patch now that SUBLEVEL is optional.
-- revert-ftrace-remove-unnecessary-disabling-of-irqs.patch: drop upstreamed
- patch.
-- drm-intel-eeebox-eb1007-quirk.patch: ditto.
-- ath5k-disable-fast-channel-switching-by-default.patch: ditto.
-
-* Thu Jun 09 2011 Kyle McMartin <kmcmartin@redhat.com>
-- ath5k-disable-fast-channel-switching-by-default.patch (rhbz#709122)
- (korgbz#34992) [a99168ee in wireless-next]
-
-* Thu Jun 09 2011 Kyle McMartin <kmcmartin@redhat.com> 3.0-0.rc2.git0.2
-- rhbz#710921: revert-ftrace-remove-unnecessary-disabling-of-irqs.patch
-
-* Wed Jun 08 2011 Kyle McMartin <kmcmartin@redhat.com> 3.0-0.rc2.git0.1
-- Update to 3.0-rc2, rebase utsname fix.
-- Build IPv6 into the kernel for a variety of reasons
- (http://lists.fedoraproject.org/pipermail/kernel/2011-June/003105.html)
-
-* Mon Jun 06 2011 Kyle McMartin <kmcmartin@redhat.com> 3.0-0.rc1.git0.3
-- Conflict with module-init-tools older than 3.13 to ensure the
- 3.0 transition is handled correctly.
-
-* Wed Jun 01 2011 Kyle McMartin <kmcmartin@redhat.com> 3.0-0.rc1.git0.2
-- Fix utsname for 3.0-rc1
-
-* Mon May 30 2011 Kyle McMartin <kmcmartin@redhat.com> 3.0-0.rc1.git0.1
-- Linux 3.0-rc1 (won't build until module-init-tools gets an update.)
-
-* Mon May 30 2011 Kyle McMartin <kyle@redhat.com>
-- Trimmed changelog, see fedpkg git for earlier history.
-
-###
-# The following Emacs magic makes C-c C-e use UTC dates.
-# Local Variables:
-# rpm-change-log-uses-utc: t
-# End:
-###
git://git.onelab.eu / linux-3.git / blobdiff