+# We have to override the new %%install behavior because, well... the kernel is special.
+%global __spec_install_pre %{___build_pre}
+
+Summary: The Linux kernel
+
+# For a stable, released kernel, released_kernel should be 1. For rawhide
+# and/or a kernel built from an rc or git snapshot, released_kernel should
+# be 0.
+%global released_kernel 1
+
+# Save original buildid for later if it's defined
+%if 0%{?buildid:1}
+%global orig_buildid %{buildid}
+%undefine buildid
+%endif
+
+###################################################################
+# Polite request for people who spin their own kernel rpms:
+# please modify the "buildid" define in a way that identifies
+# that the kernel isn't the stock distribution kernel, for example,
+# by setting the define to ".local" or ".bz123456". This will be
+# appended to the full kernel version.
+#
+# (Uncomment the '#' and both spaces below to set the buildid.)
+#
+%define buildid .planetlab
+###################################################################
+
+# The buildid can also be specified on the rpmbuild command line
+# by adding --define="buildid .whatever". If both the specfile and
+# the environment define a buildid they will be concatenated together.
+%if 0%{?orig_buildid:1}
+%if 0%{?buildid:1}
+%global srpm_buildid %{buildid}
+%define buildid %{srpm_buildid}%{orig_buildid}
+%else
+%define buildid %{orig_buildid}
+%endif
+%endif
+
+# baserelease defines which build revision of this kernel version we're
+# building. We used to call this fedora_build, but the magical name
+# baserelease is matched by the rpmdev-bumpspec tool, which you should use.
+#
+# We used to have some extra magic weirdness to bump this automatically,
+# but now we don't. Just use: rpmdev-bumpspec -c 'comment for changelog'
+# When changing base_sublevel below or going from rc to a final kernel,
+# reset this by hand to 1 (or to 0 and then use rpmdev-bumpspec).
+# scripts/rebase.sh should be made to do that for you, actually.
+#
+# For non-released -rc kernels, this will be prepended with "0.", so
+# for example a 3 here will become 0.3
+#
+%global baserelease 8
+%global fedora_build %{baserelease}
+
+# base_sublevel is the kernel version we're starting with and patching
+# on top of -- for example, 2.6.22-rc7-git1 starts with a 2.6.21 base,
+# which yields a base_sublevel of 21.
+%define base_sublevel 1
+
+## If this is a released kernel ##
+%if 0%{?released_kernel}
+
+# Do we have a -stable update to apply?
+%define stable_update 0
+# Is it a -stable RC?
+%define stable_rc 0
+# Set rpm version accordingly
+%if 0%{?stable_update}
+%define stablerev %{stable_update}
+%define stable_base %{stable_update}
+%if 0%{?stable_rc}
+# stable RCs are incremental patches, so we need the previous stable patch
+%define stable_base %(echo $((%{stable_update} - 1)))
+%endif
+%endif
+%define rpmversion 3.%{base_sublevel}.%{stable_update}
+
+## The not-released-kernel case ##
+%else
+# The next upstream release sublevel (base_sublevel+1)
+%define upstream_sublevel %(echo $((%{base_sublevel} + 1)))
+# The rc snapshot level
+%define rcrev 10
+# The git snapshot level
+%define gitrev 1
+# Set rpm version accordingly
+%define rpmversion 3.%{upstream_sublevel}.0
+%endif
+# Nb: The above rcrev and gitrev values automagically define Patch00 and Patch01 below.
+
+# What parts do we want to build? We must build at least one kernel.
+# These are the kernels that are built IF the architecture allows it.
+# All should default to 1 (enabled) and be flipped to 0 (disabled)
+# by later arch-specific checks.
+
+# The following build options are enabled by default.
+# Use either --without <opt> in your rpmbuild command or force values
+# to 0 in here to disable them.
+#
+# standard kernel
+%define with_up %{?_without_up: 0} %{?!_without_up: 1}
+# kernel-smp (only valid for ppc 32-bit)
+%define with_smp %{?_without_smp: 0} %{?!_without_smp: 1}
+# kernel-PAE (only valid for i686)
+%define with_pae %{?_without_pae: 0} %{?!_without_pae: 1}
+# kernel-debug
+%define with_debug %{?_without_debug: 0} %{?!_without_debug: 1}
+# kernel-doc
+%define with_doc %{?_without_doc: 0} %{?!_without_doc: 1}
+# kernel-headers
+%define with_headers %{?_without_headers: 0} %{?!_without_headers: 1}
+# tools
+%define with_tools %{?_without_tools: 0} %{?!_without_tools: 1}
+# kernel-debuginfo
+%define with_debuginfo %{?_without_debuginfo: 0} %{?!_without_debuginfo: 1}
+# kernel-bootwrapper (for creating zImages from kernel + initrd)
+%define with_bootwrapper %{?_without_bootwrapper: 0} %{?!_without_bootwrapper: 1}
+# Want to build a the vsdo directories installed
+%define with_vdso_install %{?_without_vdso_install: 0} %{?!_without_vdso_install: 1}
+# ARM OMAP (Beagle/Panda Board)
+%define with_omap %{?_without_omap: 0} %{?!_without_omap: 1}
+# kernel-tegra (only valid for arm)
+%define with_tegra %{?_without_tegra: 0} %{?!_without_tegra: 1}
+
+# Build the kernel-doc package, but don't fail the build if it botches.
+# Here "true" means "continue" and "false" means "fail the build".
+%if 0%{?released_kernel}
+%define doc_build_fail false
+%else
+%define doc_build_fail true
+%endif
+
+%define rawhide_skip_docs 0
+%if 0%{?rawhide_skip_docs}
+%define with_doc 0
+%define doc_build_fail true
+%endif
+
+# Additional options for user-friendly one-off kernel building:
+#
+# Only build the base kernel (--with baseonly):
+%define with_baseonly %{?_with_baseonly: 1} %{?!_with_baseonly: 0}
+# Only build the smp kernel (--with smponly):
+%define with_smponly %{?_with_smponly: 1} %{?!_with_smponly: 0}
+# Only build the pae kernel (--with paeonly):
+%define with_paeonly %{?_with_paeonly: 1} %{?!_with_paeonly: 0}
+# Only build the debug kernel (--with dbgonly):
+%define with_dbgonly %{?_with_dbgonly: 1} %{?!_with_dbgonly: 0}
+
+# should we do C=1 builds with sparse
+%define with_sparse %{?_with_sparse: 1} %{?!_with_sparse: 0}
+
+# Set debugbuildsenabled to 1 for production (build separate debug kernels)
+# and 0 for rawhide (all kernels are debug kernels).
+# See also 'make debug' and 'make release'.
+%define debugbuildsenabled 1
+
+# Want to build a vanilla kernel build without any non-upstream patches?
+%define with_vanilla %{?_with_vanilla: 1} %{?!_with_vanilla: 0}
+
+# pkg_release is what we'll fill in for the rpm Release: field
+%if 0%{?released_kernel}
+
+%if 0%{?stable_rc}
+%define stable_rctag .rc%{stable_rc}
+%endif
+%define pkg_release %{fedora_build}%{?stable_rctag}%{?buildid}%{?dist}
+
+%else
+
+# non-released_kernel
+%if 0%{?rcrev}
+%define rctag .rc%rcrev
+%else
+%define rctag .rc0
+%endif
+%if 0%{?gitrev}
+%define gittag .git%gitrev
+%else
+%define gittag .git0
+%endif
+%define pkg_release 0%{?rctag}%{?gittag}.%{fedora_build}%{?buildid}%{?dist}
+
+%endif
+
+# The kernel tarball/base version
+%define kversion 3.%{base_sublevel}
+
+%define make_target bzImage
+
+%define KVERREL %{version}-%{release}.%{_target_cpu}
+%define hdrarch %_target_cpu
+%define asmarch %_target_cpu
+
+%if 0%{!?nopatches:1}
+%define nopatches 0
+%endif
+
+%if %{with_vanilla}
+%define nopatches 1
+%endif
+
+%if %{nopatches}
+%define with_bootwrapper 0
+%define variant -vanilla
+%else
+%define variant_fedora -fedora
+%endif
+
+%define using_upstream_branch 0
+%if 0%{?upstream_branch:1}
+%define stable_update 0
+%define using_upstream_branch 1
+%define variant -%{upstream_branch}%{?variant_fedora}
+%define pkg_release 0.%{fedora_build}%{upstream_branch_tag}%{?buildid}%{?dist}
+%endif
+
+%if !%{debugbuildsenabled}
+%define with_debug 0
+%endif
+
+%if !%{with_debuginfo}
+%define _enable_debug_packages 0
+%endif
+%define debuginfodir /usr/lib/debug
+
+# kernel-PAE is only built on i686.
+%ifnarch i686
+%define with_pae 0
+%endif
+
+# kernel-tegra and omap is only built on armv7 hard and softfp
+%ifnarch armv7hl armv7l
+%define with_tegra 0
+%define with_omap 0
+%endif
+
+# if requested, only build base kernel
+%if %{with_baseonly}
+%define with_smp 0
+%define with_pae 0
+%define with_debug 0
+%endif
+
+# if requested, only build smp kernel
+%if %{with_smponly}
+%define with_up 0
+%define with_pae 0
+%define with_debug 0
+%endif
+
+# if requested, only build pae kernel
+%if %{with_paeonly}
+%define with_up 0
+%define with_smp 0
+%define with_debug 0
+%endif
+
+# if requested, only build debug kernel
+%if %{with_dbgonly}
+%if %{debugbuildsenabled}
+%define with_up 0
+%define with_pae 0
+%endif
+%define with_smp 0
+%define with_pae 0
+%define with_tools 0
+%endif
+
+%define all_x86 i386 i686
+
+%if %{with_vdso_install}
+# These arches install vdso/ directories.
+%define vdso_arches %{all_x86} x86_64 ppc ppc64
+%endif
+
+# Overrides for generic default options
+
+# only ppc and alphav56 need separate smp kernels
+%ifnarch ppc alphaev56
+%define with_smp 0
+%endif
+
+# don't do debug builds on anything but i686 and x86_64
+%ifnarch i686 x86_64
+%define with_debug 0
+%endif
+
+# only package docs noarch
+%ifnarch noarch
+%define with_doc 0
+%endif
+
+# don't build noarch kernels or headers (duh)
+%ifarch noarch
+%define with_up 0
+%define with_headers 0
+%define with_tools 0
+%define all_arch_configs kernel-%{version}-*.config
+%endif
+
+# bootwrapper is only on ppc
+%ifnarch ppc ppc64
+%define with_bootwrapper 0
+%endif
+
+# sparse blows up on ppc64 alpha and sparc64
+%ifarch ppc64 ppc alpha sparc64
+%define with_sparse 0
+%endif
+
+# Per-arch tweaks
+
+%ifarch %{all_x86}
+%define asmarch x86
+%define hdrarch i386
+%define all_arch_configs kernel-%{version}-i?86*.config
+%define image_install_path boot
+%define kernel_image arch/x86/boot/bzImage
+%endif
+
+%ifarch x86_64
+%define asmarch x86
+%define all_arch_configs kernel-%{version}-x86_64*.config
+%define image_install_path boot
+%define kernel_image arch/x86/boot/bzImage
+%endif
+
+%ifarch ppc64
+%define asmarch powerpc
+%define hdrarch powerpc
+%define all_arch_configs kernel-%{version}-ppc64*.config
+%define image_install_path boot
+%define make_target vmlinux
+%define kernel_image vmlinux
+%define kernel_image_elf 1
+%endif
+
+%ifarch s390x
+%define asmarch s390
+%define hdrarch s390
+%define all_arch_configs kernel-%{version}-s390x.config
+%define image_install_path boot
+%define make_target image
+%define kernel_image arch/s390/boot/image
+%define with_tools 0
+%endif
+
+%ifarch sparc64
+%define asmarch sparc
+%define all_arch_configs kernel-%{version}-sparc64*.config
+%define make_target vmlinux
+%define kernel_image vmlinux
+%define image_install_path boot
+%define with_tools 0
+%endif
+
+%ifarch sparcv9
+%define hdrarch sparc
+%endif
+
+%ifarch ppc
+%define asmarch powerpc
+%define hdrarch powerpc
+%define all_arch_configs kernel-%{version}-ppc{-,.}*config
+%define image_install_path boot
+%define make_target vmlinux
+%define kernel_image vmlinux
+%define kernel_image_elf 1
+%endif
+
+%ifarch ia64
+%define all_arch_configs kernel-%{version}-ia64*.config
+%define image_install_path boot/efi/EFI/redhat
+%define make_target compressed
+%define kernel_image vmlinux.gz
+%endif
+
+%ifarch alpha alphaev56
+%define all_arch_configs kernel-%{version}-alpha*.config
+%define image_install_path boot
+%define make_target vmlinux
+%define kernel_image vmlinux
+%endif
+
+%ifarch %{arm}
+%define all_arch_configs kernel-%{version}-arm*.config
+%define image_install_path boot
+%define asmarch arm
+%define hdrarch arm
+%define make_target bzImage
+%define kernel_image arch/arm/boot/zImage
+# we build a up kernel on armv5tel. its used for qemu.
+%ifnarch armv5tel
+%define with_up 0
+%endif
+# we only build headers on the base arm arches
+# just like we used to only build them on i386 for x86
+%ifnarch armv5tel armv7hl
+%define with_headers 0
+%endif
+%define with_perf 0
+%endif
+
+%if %{nopatches}
+# XXX temporary until last vdso patches are upstream
+%define vdso_arches ppc ppc64
+%endif
+
+# Should make listnewconfig fail if there's config options
+# printed out?
+%if %{nopatches}%{using_upstream_branch}
+%define listnewconfig_fail 0
+%else
+%define listnewconfig_fail 1
+%endif
+
+# To temporarily exclude an architecture from being built, add it to
+# %%nobuildarches. Do _NOT_ use the ExclusiveArch: line, because if we
+# don't build kernel-headers then the new build system will no longer let
+# us use the previous build of that package -- it'll just be completely AWOL.
+# Which is a BadThing(tm).
+
+# We only build kernel-headers on the following...
+%define nobuildarches i386 s390 sparc sparcv9
+
+%ifarch %nobuildarches
+%define with_up 0
+%define with_smp 0
+%define with_pae 0
+%define with_debuginfo 0
+%define with_tools 0
+%define _enable_debug_packages 0
+%endif
+
+%define with_pae_debug 0
+%if %{with_pae}
+%define with_pae_debug %{with_debug}
+%endif
+
+# Architectures we build tools/cpupower on
+%define cpupowerarchs %{ix86} x86_64 ppc ppc64
+#%define cpupowerarchs ppc ppc64
+
+#
+# Three sets of minimum package version requirements in the form of Conflicts:
+# to versions below the minimum
+#
+
+#
+# First the general kernel 2.6 required versions as per
+# Documentation/Changes
+#
+%define kernel_dot_org_conflicts ppp < 2.4.3-3, isdn4k-utils < 3.2-32, nfs-utils < 1.0.7-12, e2fsprogs < 1.37-4, util-linux < 2.12, jfsutils < 1.1.7-2, reiserfs-utils < 3.6.19-2, xfsprogs < 2.6.13-4, procps < 3.2.5-6.3, oprofile < 0.9.1-2, device-mapper-libs < 1.02.63-2, mdadm < 3.2.1-5
+
+#
+# Then a series of requirements that are distribution specific, either
+# because we add patches for something, or the older versions have
+# problems with the newer kernel or lack certain things that make
+# integration in the distro harder than needed.
+#
+%define package_conflicts initscripts < 7.23, udev < 063-6, iptables < 1.3.2-1, ipw2200-firmware < 2.4, iwl4965-firmware < 228.57.2, selinux-policy-targeted < 1.25.3-14, squashfs-tools < 4.0, wireless-tools < 29-3
+
+# We moved the drm include files into kernel-headers, make sure there's
+# a recent enough libdrm-devel on the system that doesn't have those.
+%define kernel_headers_conflicts libdrm-devel < 2.4.0-0.15
+
+#
+# Packages that need to be installed before the kernel is, because the %%post
+# scripts use them.
+#
+%define kernel_prereq fileutils, module-init-tools >= 3.11.1, initscripts >= 8.11.1-1, grubby >= 7.0.1
+%define initrd_prereq dracut >= 001-7
+
+#
+# This macro does requires, provides, conflicts, obsoletes for a kernel package.
+# %%kernel_reqprovconf <subpackage>
+# It uses any kernel_<subpackage>_conflicts and kernel_<subpackage>_obsoletes
+# macros defined above.
+#
+%define kernel_reqprovconf \
+Provides: kernel = %{rpmversion}-%{pkg_release}\
+Provides: kernel-%{_target_cpu} = %{rpmversion}-%{pkg_release}%{?1:.%{1}}\
+Provides: kernel-drm = 4.3.0\
+Provides: kernel-drm-nouveau = 16\
+Provides: kernel-modeset = 1\
+Provides: kernel-uname-r = %{KVERREL}%{?1:.%{1}}\
+Requires(pre): %{kernel_prereq}\
+Requires(pre): %{initrd_prereq}\
+Requires(post): /sbin/new-kernel-pkg\
+Requires(preun): /sbin/new-kernel-pkg\
+Conflicts: %{kernel_dot_org_conflicts}\
+Conflicts: %{package_conflicts}\
+%{expand:%%{?kernel%{?1:_%{1}}_conflicts:Conflicts: %%{kernel%{?1:_%{1}}_conflicts}}}\
+%{expand:%%{?kernel%{?1:_%{1}}_obsoletes:Obsoletes: %%{kernel%{?1:_%{1}}_obsoletes}}}\
+%{expand:%%{?kernel%{?1:_%{1}}_provides:Provides: %%{kernel%{?1:_%{1}}_provides}}}\
+# We can't let RPM do the dependencies automatic because it'll then pick up\
+# a correct but undesirable perl dependency from the module headers which\
+# isn't required for the kernel proper to function\
+AutoReq: no\
+AutoProv: yes\
+%{nil}
+
+Name: kernel%{?variant}
+Group: System Environment/Kernel
+License: GPLv2
+URL: http://www.kernel.org/
+Version: %{rpmversion}
+Release: %{pkg_release}
+# DO NOT CHANGE THE 'ExclusiveArch' LINE TO TEMPORARILY EXCLUDE AN ARCHITECTURE BUILD.
+# SET %%nobuildarches (ABOVE) INSTEAD
+ExclusiveArch: noarch %{all_x86} x86_64 ppc ppc64 ia64 %{sparc} s390 s390x alpha alphaev56 %{arm}
+ExclusiveOS: Linux
+
+%kernel_reqprovconf
+
+#
+# List the packages used during the kernel build
+#
+BuildRequires: module-init-tools, patch >= 2.5.4, bash >= 2.03, sh-utils, tar
+BuildRequires: bzip2, findutils, gzip, m4, perl, make >= 3.78, diffutils, gawk
+BuildRequires: gcc >= 3.4.2, binutils >= 2.12, redhat-rpm-config
+BuildRequires: net-tools
+BuildRequires: xmlto, asciidoc
+%if %{with_sparse}
+BuildRequires: sparse >= 0.4.1
+%endif
+%if %{with_tools}
+BuildRequires: elfutils-devel zlib-devel binutils-devel newt-devel python-devel perl(ExtUtils::Embed) pciutils-devel gettext
+%endif
+BuildConflicts: rhbuildsys(DiskFree) < 500Mb
+
+%define fancy_debuginfo 0
+%if %{with_debuginfo}
+%if 0%{?fedora} >= 8 || 0%{?rhel} >= 6
+%define fancy_debuginfo 1
+%endif
+%endif
+
+%if %{fancy_debuginfo}
+# Fancy new debuginfo generation introduced in Fedora 8.
+BuildRequires: rpm-build >= 4.4.2.1-4
+%define debuginfo_args --strict-build-id
+%endif
+
+Source0: ftp://ftp.kernel.org/pub/linux/kernel/v3.0/linux-%{kversion}.tar.bz2
+
+Source11: genkey
+Source14: find-provides
+Source15: merge.pl
+
+Source20: Makefile.config
+Source21: config-debug
+Source22: config-nodebug
+Source23: config-generic
+Source24: config-rhel-generic
+
+Source30: config-x86-generic
+Source31: config-i686-PAE
+Source32: config-x86-32-generic
+
+Source40: config-x86_64-generic
+
+Source50: config-powerpc-generic
+Source51: config-powerpc32-generic
+Source52: config-powerpc32-smp
+Source53: config-powerpc64
+
+Source60: config-ia64-generic
+
+Source70: config-s390x
+
+Source90: config-sparc64-generic
+
+Source100: config-arm-generic
+Source110: config-arm-omap-generic
+Source111: config-arm-tegra
+
+# This file is intentionally left empty in the stock kernel. Its a nicety
+# added for those wanting to do custom rebuilds with altered config opts.
+Source1000: config-local
+
+# Sources for kernel-tools
+Source2000: cpupower.service
+Source2001: cpupower.config
+
+# Here should be only the patches up to the upstream canonical Linus tree.
+
+# For a stable release kernel
+%if 0%{?stable_update}
+%if 0%{?stable_base}
+%define stable_patch_00 patch-3.%{base_sublevel}.%{stable_base}.bz2
+Patch00: %{stable_patch_00}
+%endif
+%if 0%{?stable_rc}
+%define stable_patch_01 patch-3.%{base_sublevel}.%{stable_update}-rc%{stable_rc}.bz2
+Patch01: %{stable_patch_01}
+%endif
+
+# non-released_kernel case
+# These are automagically defined by the rcrev and gitrev values set up
+# near the top of this spec file.
+%else
+%if 0%{?rcrev}
+Patch00: patch-3.%{upstream_sublevel}-rc%{rcrev}.bz2
+%if 0%{?gitrev}
+Patch01: patch-3.%{upstream_sublevel}-rc%{rcrev}-git%{gitrev}.bz2
+%endif
+%else
+# pre-{base_sublevel+1}-rc1 case
+%if 0%{?gitrev}
+Patch00: patch-3.%{base_sublevel}-git%{gitrev}.bz2
+%endif
+%endif
+%endif
+
+%if %{using_upstream_branch}
+### BRANCH PATCH ###
+%endif
+
+Patch02: git-linus.diff
+
+# we also need compile fixes for -vanilla
+Patch04: linux-2.6-compile-fixes.patch
+
+# build tweak for build ID magic, even for -vanilla
+Patch05: linux-2.6-makefile-after_link.patch
+
+%if !%{nopatches}
+
+
+# revert upstream patches we get via other methods
+Patch09: linux-2.6-upstream-reverts.patch
+# Git trees.
+
+# Standalone patches
+
+Patch100: taint-vbox.patch
+Patch160: linux-2.6-32bit-mmap-exec-randomization.patch
+Patch161: linux-2.6-i386-nx-emulation.patch
+
+Patch202: linux-2.6-debug-taint-vm.patch
+
+Patch383: linux-2.6-defaults-aspm.patch
+
+Patch390: linux-2.6-defaults-acpi-video.patch
+Patch391: linux-2.6-acpi-video-dos.patch
+Patch394: linux-2.6-acpi-debug-infinite-loop.patch
+Patch395: acpi-ensure-thermal-limits-match-cpu-freq.patch
+Patch396: acpi-sony-nonvs-blacklist.patch
+
+Patch450: linux-2.6-input-kill-stupid-messages.patch
+Patch452: linux-2.6.30-no-pcspkr-modalias.patch
+
+Patch460: linux-2.6-serial-460800.patch
+
+Patch470: die-floppy-die.patch
+Patch471: floppy-drop-disable_hlt-warning.patch
+
+Patch510: linux-2.6-silence-noise.patch
+Patch530: linux-2.6-silence-fbcon-logo.patch
+
+Patch700: linux-2.6-e1000-ich9-montevina.patch
+
+Patch800: linux-2.6-crash-driver.patch
+
+# crypto/
+
+# virt + ksm patches
+Patch1500: fix_xen_guest_on_old_EC2.patch
+
+# DRM
+
+# nouveau + drm fixes
+Patch1810: drm-nouveau-updates.patch
+# intel drm is all merged upstream
+Patch1824: drm-intel-next.patch
+# make sure the lvds comes back on lid open
+Patch1825: drm-intel-make-lvds-work.patch
+# hush the i915 fbc noise
+Patch1826: drm-i915-fbc-stfu.patch
+# rhbz#729882, https://bugs.freedesktop.org/attachment.cgi?id=49069
+Patch1827: drm-i915-sdvo-lvds-is-digital.patch
+
+Patch1850: drm-lower-severity-radeon-lockup.diff
+
+Patch1900: linux-2.6-intel-iommu-igfx.patch
+
+# Quiet boot fixes
+# silence the ACPI blacklist code
+Patch2802: linux-2.6-silence-acpi-blacklist.patch
+
+# media patches
+Patch2899: linux-2.6-v4l-dvb-fixes.patch
+Patch2900: linux-2.6-v4l-dvb-update.patch
+Patch2901: linux-2.6-v4l-dvb-experimental.patch
+Patch2902: linux-2.6-v4l-dvb-uvcvideo-update.patch
+
+Patch2903: media-DiBcom-protect-the-I2C-bufer-access.patch
+Patch2904: media-dib0700-protect-the-dib0700-buffer-access.patch
+Patch2905: media-dib0700-correct-error-message.patch
+
+Patch3000: rcutree-avoid-false-quiescent-states.patch
+
+# fs fixes
+
+# NFSv4
+
+# patches headed upstream
+Patch12010: add-appleir-usb-driver.patch
+
+Patch12016: disable-i8042-check-on-apple-mac.patch
+
+Patch12021: udlfb-bind-framebuffer-to-interface.patch
+
+Patch12023: ums-realtek-driver-uses-stack-memory-for-DMA.patch
+Patch12024: epoll-fix-spurious-lockdep-warnings.patch
+Patch12025: rcu-avoid-just-onlined-cpu-resched.patch
+Patch12026: block-stray-block-put-after-teardown.patch
+Patch12027: usb-add-quirk-for-logitech-webcams.patch
+Patch12029: crypto-register-cryptd-first.patch
+Patch12030: epoll-limit-paths.patch
+
+Patch12303: dmar-disable-when-ricoh-multifunction.patch
+
+Patch13002: revert-efi-rtclock.patch
+Patch13003: efi-dont-map-boot-services-on-32bit.patch
+
+Patch13007: add-macbookair41-keyboard.patch
+
+Patch13009: hvcs_pi_buf_alloc.patch
+
+Patch13013: powerpc-Fix-deadlock-in-icswx-code.patch
+
+Patch13014: iwlagn-fix-ht_params-NULL-pointer-dereference.patch
+
+Patch20000: utrace.patch
+
+# Flattened devicetree support
+Patch21000: arm-omap-dt-compat.patch
+Patch21001: arm-smsc-support-reading-mac-address-from-device-tree.patch
+
+#rhbz #722509
+Patch21002: mmc-Always-check-for-lower-base-frequency-quirk-for-.patch
+
+#rhbz #735946
+Patch21020: 0001-mm-vmscan-Limit-direct-reclaim-for-higher-order-allo.patch
+Patch21021: 0002-mm-Abort-reclaim-compaction-if-compaction-can-procee.patch
+
+#rhbz 748691
+Patch21030: be2net-non-member-vlan-pkts-not-received-in-promisco.patch
+Patch21031: benet-remove-bogus-unlikely-on-vlan-check.patch
+
+#rhbz 749166
+Patch21050: xfs-Fix-possible-memory-corruption-in-xfs_readlink.patch
+
+Patch21070: oom-fix-integer-overflow-of-points.patch
+
+%endif
+
+BuildRoot: %{_tmppath}/kernel-%{KVERREL}-root
+
+%description
+The kernel package contains the Linux kernel (vmlinuz), the core of any
+Linux operating system. The kernel handles the basic functions
+of the operating system: memory allocation, process allocation, device
+input and output, etc.
+
+
+%package doc
+Summary: Various documentation bits found in the kernel source
+Group: Documentation
+%description doc
+This package contains documentation files from the kernel
+source. Various bits of information about the Linux kernel and the
+device drivers shipped with it are documented in these files.
+
+You'll want to install this package if you need a reference to the
+options that can be passed to Linux kernel modules at load time.
+
+
+%package headers
+Summary: Header files for the Linux kernel for use by glibc
+Group: Development/System
+Obsoletes: glibc-kernheaders < 3.0-46
+Provides: glibc-kernheaders = 3.0-46
+%description headers
+Kernel-headers includes the C header files that specify the interface
+between the Linux kernel and userspace libraries and programs. The
+header files define structures and constants that are needed for
+building most standard programs and are also needed for rebuilding the
+glibc package.
+
+%package firmware
+Summary: Firmware files used by the Linux kernel
+Group: Development/System
+# This is... complicated.
+# Look at the WHENCE file.
+License: GPL+ and GPLv2+ and MIT and Redistributable, no modification permitted
+%if "x%{?variant}" != "x"
+Provides: kernel-firmware = %{rpmversion}-%{pkg_release}
+%endif
+%description firmware
+Kernel-firmware includes firmware files required for some devices to
+operate.
+
+%package bootwrapper
+Summary: Boot wrapper files for generating combined kernel + initrd images
+Group: Development/System
+Requires: gzip binutils
+%description bootwrapper
+Kernel-bootwrapper contains the wrapper code which makes bootable "zImage"
+files combining both kernel and initial ramdisk.
+
+%package debuginfo-common-%{_target_cpu}
+Summary: Kernel source files used by %{name}-debuginfo packages
+Group: Development/Debug
+%description debuginfo-common-%{_target_cpu}
+This package is required by %{name}-debuginfo subpackages.
+It provides the kernel source files common to all builds.
+
+%if %{with_tools}
+%package -n kernel-tools
+Summary: Assortment of tools for the Linux kernel
+Group: Development/System
+License: GPLv2
+Obsoletes: perf
+Provides: perf
+Provides: cpupowerutils = 1:009-0.6.p1
+Obsoletes: cpupowerutils < 1:009-0.6.p1
+Provides: cpufreq-utils = 1:009-0.6.p1
+Provides: cpufrequtils = 1:009-0.6.p1
+Obsoletes: cpufreq-utils < 1:009-0.6.p1
+Obsoletes: cpufrequtils < 1:009-0.6.p1
+Obsoletes: cpuspeed < 1:1.5-16
+%description -n kernel-tools
+This package contains the tools/ directory from the kernel source
+- the perf tool and the supporting documentation.
+
+%package -n kernel-tools-devel
+Summary: Assortment of tools for the Linux kernel
+Group: Development/System
+License: GPLv2
+Requires: kernel-tools = %{version}-%{release}
+Provides: cpupowerutils-devel = 1:009-0.6.p1
+Obsoletes: cpupowerutils-devel < 1:009-0.6.p1
+%description -n kernel-tools-devel
+This package contains the development files for the tools/ directory from
+the kernel source.
+
+%package -n kernel-tools-debuginfo
+Summary: Debug information for package kernel-tools
+Group: Development/Debug
+Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}
+AutoReqProv: no
+%description -n kernel-tools-debuginfo
+This package provides debug information for package kernel-tools.
+
+# Note that this pattern only works right to match the .build-id
+# symlinks because of the trailing nonmatching alternation and
+# the leading .*, because of find-debuginfo.sh's buggy handling
+# of matching the pattern against the symlinks file.
+%{expand:%%global debuginfo_args %{?debuginfo_args} -p '.*%%{_bindir}/perf(\.debug)?|.*%%{_libexecdir}/perf-core/.*|.*%%{_bindir}/centrino-decode(\.debug)?|.*%%{_bindir}/powernow-k8-decode(\.debug)?|.*%%{_bindir}/cpupower(\.debug)?|.*%%{_libdir}/libcpupower.*|XXX' -o kernel-tools-debuginfo.list}
+%endif
+
+
+#
+# This macro creates a kernel-<subpackage>-debuginfo package.
+# %%kernel_debuginfo_package <subpackage>
+#
+%define kernel_debuginfo_package() \
+%package %{?1:%{1}-}debuginfo\
+Summary: Debug information for package %{name}%{?1:-%{1}}\
+Group: Development/Debug\
+Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}\
+Provides: %{name}%{?1:-%{1}}-debuginfo-%{_target_cpu} = %{version}-%{release}\
+AutoReqProv: no\
+%description -n %{name}%{?1:-%{1}}-debuginfo\
+This package provides debug information for package %{name}%{?1:-%{1}}.\
+This is required to use SystemTap with %{name}%{?1:-%{1}}-%{KVERREL}.\
+%{expand:%%global debuginfo_args %{?debuginfo_args} -p '/.*/%%{KVERREL}%{?1:\.%{1}}/.*|/.*%%{KVERREL}%{?1:\.%{1}}(\.debug)?' -o debuginfo%{?1}.list}\
+%{nil}
+
+#
+# This macro creates a kernel-<subpackage>-devel package.
+# %%kernel_devel_package <subpackage> <pretty-name>
+#
+%define kernel_devel_package() \
+%package %{?1:%{1}-}devel\
+Summary: Development package for building kernel modules to match the %{?2:%{2} }kernel\
+Group: System Environment/Kernel\
+Provides: kernel%{?1:-%{1}}-devel-%{_target_cpu} = %{version}-%{release}\
+Provides: kernel-devel-%{_target_cpu} = %{version}-%{release}%{?1:.%{1}}\
+Provides: kernel-devel = %{version}-%{release}%{?1:.%{1}}\
+Provides: kernel-devel-uname-r = %{KVERREL}%{?1:.%{1}}\
+AutoReqProv: no\
+Requires(pre): /usr/bin/find\
+Requires: perl\
+%description -n kernel%{?variant}%{?1:-%{1}}-devel\
+This package provides kernel headers and makefiles sufficient to build modules\
+against the %{?2:%{2} }kernel package.\
+%{nil}
+
+#
+# This macro creates a kernel-<subpackage> and its -devel and -debuginfo too.
+# %%define variant_summary The Linux kernel compiled for <configuration>
+# %%kernel_variant_package [-n <pretty-name>] <subpackage>
+#
+%define kernel_variant_package(n:) \
+%package %1\
+Summary: %{variant_summary}\
+Group: System Environment/Kernel\
+%kernel_reqprovconf\
+%{expand:%%kernel_devel_package %1 %{!?-n:%1}%{?-n:%{-n*}}}\
+%{expand:%%kernel_debuginfo_package %1}\
+%{nil}
+
+
+# First the auxiliary packages of the main kernel package.
+%kernel_devel_package
+%kernel_debuginfo_package
+
+
+# Now, each variant package.
+
+%define variant_summary The Linux kernel compiled for SMP machines
+%kernel_variant_package -n SMP smp
+%description smp
+This package includes a SMP version of the Linux kernel. It is
+required only on machines with two or more CPUs as well as machines with
+hyperthreading technology.
+
+Install the kernel-smp package if your machine uses two or more CPUs.
+
+
+%define variant_summary The Linux kernel compiled for PAE capable machines
+%kernel_variant_package PAE
+%description PAE
+This package includes a version of the Linux kernel with support for up to
+64GB of high memory. It requires a CPU with Physical Address Extensions (PAE).
+The non-PAE kernel can only address up to 4GB of memory.
+Install the kernel-PAE package if your machine has more than 4GB of memory.
+
+
+%define variant_summary The Linux kernel compiled with extra debugging enabled for PAE capable machines
+%kernel_variant_package PAEdebug
+Obsoletes: kernel-PAE-debug
+%description PAEdebug
+This package includes a version of the Linux kernel with support for up to
+64GB of high memory. It requires a CPU with Physical Address Extensions (PAE).
+The non-PAE kernel can only address up to 4GB of memory.
+Install the kernel-PAE package if your machine has more than 4GB of memory.
+
+This variant of the kernel has numerous debugging options enabled.
+It should only be installed when trying to gather additional information
+on kernel bugs, as some of these options impact performance noticably.
+
+
+%define variant_summary The Linux kernel compiled with extra debugging enabled
+%kernel_variant_package debug
+%description debug
+The kernel package contains the Linux kernel (vmlinuz), the core of any
+Linux operating system. The kernel handles the basic functions
+of the operating system: memory allocation, process allocation, device
+input and output, etc.
+
+This variant of the kernel has numerous debugging options enabled.
+It should only be installed when trying to gather additional information
+on kernel bugs, as some of these options impact performance noticably.
+
+
+%define variant_summary The Linux kernel compiled for TI-OMAP boards
+%kernel_variant_package omap
+%description omap
+This package includes a version of the Linux kernel with support for
+TI-OMAP based systems, i.e., BeagleBoard-xM.
+
+%define variant_summary The Linux kernel compiled for tegra boards
+%kernel_variant_package tegra
+%description tegra
+This package includes a version of the Linux kernel with support for
+nvidia tegra based systems, i.e., trimslice, ac-100.
+
+
+%prep
+# do a few sanity-checks for --with *only builds
+%if %{with_baseonly}
+%if !%{with_up}%{with_pae}
+echo "Cannot build --with baseonly, up build is disabled"
+exit 1
+%endif
+%endif
+
+%if %{with_smponly}
+%if !%{with_smp}
+echo "Cannot build --with smponly, smp build is disabled"
+exit 1
+%endif
+%endif
+
+# more sanity checking; do it quietly
+if [ "%{patches}" != "%%{patches}" ] ; then
+ for patch in %{patches} ; do
+ if [ ! -f $patch ] ; then
+ echo "ERROR: Patch ${patch##/*/} listed in specfile but is missing"
+ exit 1
+ fi
+ done
+fi 2>/dev/null
+
+patch_command='patch -p1 -F1 -s'
+ApplyPatch()
+{
+ local patch=$1
+ shift
+ if [ ! -f $RPM_SOURCE_DIR/$patch ]; then
+ exit 1
+ fi
+%if !%{using_upstream_branch}
+ if ! grep -E "^Patch[0-9]+: $patch\$" %{_specdir}/${RPM_PACKAGE_NAME%%%%%{?variant}}.spec ; then
+ if [ "${patch:0:8}" != "patch-3." ] ; then
+ echo "ERROR: Patch $patch not listed as a source patch in specfile"
+ exit 1
+ fi
+ fi 2>/dev/null
+%endif
+ case "$patch" in
+ *.bz2) bunzip2 < "$RPM_SOURCE_DIR/$patch" | $patch_command ${1+"$@"} ;;
+ *.gz) gunzip < "$RPM_SOURCE_DIR/$patch" | $patch_command ${1+"$@"} ;;
+ *) $patch_command ${1+"$@"} < "$RPM_SOURCE_DIR/$patch" ;;
+ esac
+}
+
+# don't apply patch if it's empty
+ApplyOptionalPatch()
+{
+ local patch=$1
+ shift
+ if [ ! -f $RPM_SOURCE_DIR/$patch ]; then
+ exit 1
+ fi
+ local C=$(wc -l $RPM_SOURCE_DIR/$patch | awk '{print $1}')
+ if [ "$C" -gt 9 ]; then
+ ApplyPatch $patch ${1+"$@"}
+ fi
+}
+
+# we don't want a .config file when building firmware: it just confuses the build system
+%define build_firmware \
+ mv .config .config.firmware_save \
+ make INSTALL_FW_PATH=$RPM_BUILD_ROOT/lib/firmware firmware_install \
+ mv .config.firmware_save .config
+
+# First we unpack the kernel tarball.
+# If this isn't the first make prep, we use links to the existing clean tarball
+# which speeds things up quite a bit.
+
+# Update to latest upstream.
+%if 0%{?released_kernel}
+%define vanillaversion 3.%{base_sublevel}
+# non-released_kernel case
+%else
+%if 0%{?rcrev}
+%define vanillaversion 3.%{upstream_sublevel}-rc%{rcrev}
+%if 0%{?gitrev}
+%define vanillaversion 3.%{upstream_sublevel}-rc%{rcrev}-git%{gitrev}
+%endif
+%else
+# pre-{base_sublevel+1}-rc1 case
+%if 0%{?gitrev}
+%define vanillaversion 3.%{base_sublevel}-git%{gitrev}
+%else
+%define vanillaversion 3.%{base_sublevel}
+%endif
+%endif
+%endif
+
+# %%{vanillaversion} : the full version name, e.g. 2.6.35-rc6-git3
+# %%{kversion} : the base version, e.g. 2.6.34
+
+# Use kernel-%%{kversion}%%{?dist} as the top-level directory name
+# so we can prep different trees within a single git directory.
+
+# Build a list of the other top-level kernel tree directories.
+# This will be used to hardlink identical vanilla subdirs.
+sharedirs=$(find "$PWD" -maxdepth 1 -type d -name 'kernel-3.*' \
+ | grep -x -v "$PWD"/kernel-%{kversion}%{?dist}) ||:
+
+if [ ! -d kernel-%{kversion}%{?dist}/vanilla-%{vanillaversion} ]; then
+
+ if [ -d kernel-%{kversion}%{?dist}/vanilla-%{kversion} ]; then
+
+ # The base vanilla version already exists.
+ cd kernel-%{kversion}%{?dist}
+
+ # Any vanilla-* directories other than the base one are stale.
+ for dir in vanilla-*; do
+ [ "$dir" = vanilla-%{kversion} ] || rm -rf $dir &
+ done
+
+ else
+
+ rm -f pax_global_header
+ # Look for an identical base vanilla dir that can be hardlinked.
+ for sharedir in $sharedirs ; do
+ if [[ ! -z $sharedir && -d $sharedir/vanilla-%{kversion} ]] ; then
+ break
+ fi
+ done
+ if [[ ! -z $sharedir && -d $sharedir/vanilla-%{kversion} ]] ; then
+%setup -q -n kernel-%{kversion}%{?dist} -c -T
+ cp -rl $sharedir/vanilla-%{kversion} .
+ else
+%setup -q -n kernel-%{kversion}%{?dist} -c
+ mv linux-%{kversion} vanilla-%{kversion}
+ fi
+
+ fi
+
+%if "%{kversion}" != "%{vanillaversion}"
+
+ for sharedir in $sharedirs ; do
+ if [[ ! -z $sharedir && -d $sharedir/vanilla-%{vanillaversion} ]] ; then
+ break
+ fi
+ done
+ if [[ ! -z $sharedir && -d $sharedir/vanilla-%{vanillaversion} ]] ; then
+
+ cp -rl $sharedir/vanilla-%{vanillaversion} .
+
+ else
+
+ # Need to apply patches to the base vanilla version.
+ cp -rl vanilla-%{kversion} vanilla-%{vanillaversion}
+ cd vanilla-%{vanillaversion}
+
+# Update vanilla to the latest upstream.
+# (non-released_kernel case only)
+%if 0%{?rcrev}
+ ApplyPatch patch-3.%{upstream_sublevel}-rc%{rcrev}.bz2
+%if 0%{?gitrev}
+ ApplyPatch patch-3.%{upstream_sublevel}-rc%{rcrev}-git%{gitrev}.bz2
+%endif
+%else
+# pre-{base_sublevel+1}-rc1 case
+%if 0%{?gitrev}
+ ApplyPatch patch-3.%{base_sublevel}-git%{gitrev}.bz2
+%endif
+%endif
+
+ cd ..
+
+ fi
+
+%endif
+
+else
+
+ # We already have all vanilla dirs, just change to the top-level directory.
+ cd kernel-%{kversion}%{?dist}
+
+fi
+
+# Now build the fedora kernel tree.
+if [ -d linux-%{kversion}.%{_target_cpu} ]; then
+ # Just in case we ctrl-c'd a prep already
+ rm -rf deleteme.%{_target_cpu}
+ # Move away the stale away, and delete in background.
+ mv linux-%{kversion}.%{_target_cpu} deleteme.%{_target_cpu}
+ rm -rf deleteme.%{_target_cpu} &
+fi
+
+cp -rl vanilla-%{vanillaversion} linux-%{kversion}.%{_target_cpu}
+
+cd linux-%{kversion}.%{_target_cpu}
+
+# released_kernel with possible stable updates
+%if 0%{?stable_base}
+ApplyPatch %{stable_patch_00}
+%endif
+%if 0%{?stable_rc}
+ApplyPatch %{stable_patch_01}
+%endif
+
+%if %{using_upstream_branch}
+### BRANCH APPLY ###
+%endif
+
+# Drop some necessary files from the source dir into the buildroot
+cp $RPM_SOURCE_DIR/config-* .
+cp %{SOURCE15} .
+
+# Dynamically generate kernel .config files from config-* files
+make -f %{SOURCE20} VERSION=%{version} configs
+
+%if %{?all_arch_configs:1}%{!?all_arch_configs:0}
+#if a rhel kernel, apply the rhel config options
+%if 0%{?rhel}
+ for i in %{all_arch_configs}
+ do
+ mv $i $i.tmp
+ ./merge.pl config-rhel-generic $i.tmp > $i
+ rm $i.tmp
+ done
+%endif
+
+# Merge in any user-provided local config option changes
+for i in %{all_arch_configs}
+do
+ mv $i $i.tmp
+ ./merge.pl %{SOURCE1000} $i.tmp > $i
+ rm $i.tmp
+done
+%endif
+
+ApplyOptionalPatch git-linus.diff
+
+ApplyPatch linux-2.6-makefile-after_link.patch
+
+#
+# misc small stuff to make things compile
+#
+ApplyOptionalPatch linux-2.6-compile-fixes.patch
+
+%if !%{nopatches}
+
+# revert patches from upstream that conflict or that we get via other means
+ApplyOptionalPatch linux-2.6-upstream-reverts.patch -R
+
+
+# Architecture patches
+# x86(-64)
+
+#
+# ARM
+#
+ApplyPatch arm-omap-dt-compat.patch
+ApplyPatch arm-smsc-support-reading-mac-address-from-device-tree.patch
+
+ApplyPatch taint-vbox.patch
+#
+# NX Emulation
+#
+ApplyPatch linux-2.6-32bit-mmap-exec-randomization.patch
+ApplyPatch linux-2.6-i386-nx-emulation.patch
+
+#
+# bugfixes to drivers and filesystems
+#
+
+# ext4
+
+# xfs
+ApplyPatch xfs-Fix-possible-memory-corruption-in-xfs_readlink.patch
+
+# btrfs
+
+
+# eCryptfs
+
+# NFSv4
+
+# USB
+
+# WMI
+
+# ACPI
+ApplyPatch linux-2.6-defaults-acpi-video.patch
+ApplyPatch linux-2.6-acpi-video-dos.patch
+ApplyPatch linux-2.6-acpi-debug-infinite-loop.patch
+ApplyPatch acpi-ensure-thermal-limits-match-cpu-freq.patch
+ApplyPatch acpi-sony-nonvs-blacklist.patch
+
+# Various low-impact patches to aid debugging.
+ApplyPatch linux-2.6-debug-taint-vm.patch
+
+#
+# PCI
+#
+# enable ASPM by default on hardware we expect to work
+ApplyPatch linux-2.6-defaults-aspm.patch
+
+#
+# SCSI Bits.
+#
+
+# ACPI
+
+# ALSA
+
+# Networking
+
+
+# Misc fixes
+# The input layer spews crap no-one cares about.
+ApplyPatch linux-2.6-input-kill-stupid-messages.patch
+
+# stop floppy.ko from autoloading during udev...
+ApplyPatch die-floppy-die.patch
+ApplyPatch floppy-drop-disable_hlt-warning.patch
+
+ApplyPatch linux-2.6.30-no-pcspkr-modalias.patch
+
+# Allow to use 480600 baud on 16C950 UARTs
+ApplyPatch linux-2.6-serial-460800.patch
+
+# Silence some useless messages that still get printed with 'quiet'
+ApplyPatch linux-2.6-silence-noise.patch
+
+# Make fbcon not show the penguins with 'quiet'
+ApplyPatch linux-2.6-silence-fbcon-logo.patch
+
+# Changes to upstream defaults.
+
+
+# /dev/crash driver.
+ApplyPatch linux-2.6-crash-driver.patch
+
+# Hack e1000e to work on Montevina SDV
+ApplyPatch linux-2.6-e1000-ich9-montevina.patch
+
+# crypto/
+
+# Assorted Virt Fixes
+ApplyPatch fix_xen_guest_on_old_EC2.patch
+
+# DRM core
+
+# Nouveau DRM
+ApplyOptionalPatch drm-nouveau-updates.patch
+
+# Intel DRM
+ApplyOptionalPatch drm-intel-next.patch
+ApplyPatch drm-intel-make-lvds-work.patch
+ApplyPatch drm-i915-fbc-stfu.patch
+ApplyPatch drm-i915-sdvo-lvds-is-digital.patch
+
+ApplyPatch drm-lower-severity-radeon-lockup.diff
+
+ApplyPatch linux-2.6-intel-iommu-igfx.patch
+
+# silence the ACPI blacklist code
+ApplyPatch linux-2.6-silence-acpi-blacklist.patch
+
+# V4L/DVB updates/fixes/experimental drivers
+# apply if non-empty
+ApplyOptionalPatch linux-2.6-v4l-dvb-fixes.patch
+ApplyOptionalPatch linux-2.6-v4l-dvb-update.patch
+ApplyOptionalPatch linux-2.6-v4l-dvb-experimental.patch
+#ApplyPatch linux-2.6-v4l-dvb-uvcvideo-update.patch
+
+# Patches headed upstream
+ApplyPatch rcutree-avoid-false-quiescent-states.patch
+
+ApplyPatch disable-i8042-check-on-apple-mac.patch
+
+ApplyPatch add-appleir-usb-driver.patch
+
+ApplyPatch udlfb-bind-framebuffer-to-interface.patch
+ApplyPatch ums-realtek-driver-uses-stack-memory-for-DMA.patch
+ApplyPatch epoll-fix-spurious-lockdep-warnings.patch
+ApplyPatch epoll-limit-paths.patch
+ApplyPatch rcu-avoid-just-onlined-cpu-resched.patch
+ApplyPatch block-stray-block-put-after-teardown.patch
+ApplyPatch usb-add-quirk-for-logitech-webcams.patch
+
+ApplyPatch crypto-register-cryptd-first.patch
+
+# rhbz#605888
+ApplyPatch dmar-disable-when-ricoh-multifunction.patch
+
+ApplyPatch revert-efi-rtclock.patch
+ApplyPatch efi-dont-map-boot-services-on-32bit.patch
+
+ApplyPatch add-macbookair41-keyboard.patch
+
+ApplyPatch hvcs_pi_buf_alloc.patch
+
+ApplyPatch powerpc-Fix-deadlock-in-icswx-code.patch
+
+ApplyPatch iwlagn-fix-ht_params-NULL-pointer-dereference.patch
+
+#rhbz #722509
+ApplyPatch mmc-Always-check-for-lower-base-frequency-quirk-for-.patch
+
+ApplyPatch media-DiBcom-protect-the-I2C-bufer-access.patch
+ApplyPatch media-dib0700-protect-the-dib0700-buffer-access.patch
+ApplyPatch media-dib0700-correct-error-message.patch
+
+# utrace.
+ApplyPatch utrace.patch
+
+#rhbz #735946
+ApplyPatch 0001-mm-vmscan-Limit-direct-reclaim-for-higher-order-allo.patch
+ApplyPatch 0002-mm-Abort-reclaim-compaction-if-compaction-can-procee.patch
+
+#rhbz 748691
+ApplyPatch be2net-non-member-vlan-pkts-not-received-in-promisco.patch
+ApplyPatch benet-remove-bogus-unlikely-on-vlan-check.patch
+
+#rhbz 750402
+ApplyPatch oom-fix-integer-overflow-of-points.patch
+
+# END OF PATCH APPLICATIONS
+
+# BEGIN Planet-Lab Patches
+%(cat planetlab-patches.in)
+# END OF Planet-Lab Patches
+
+%endif
+
+# Any further pre-build tree manipulations happen here.
+
+chmod +x scripts/checkpatch.pl
+
+# This Prevents scripts/setlocalversion from mucking with our version numbers.
+touch .scmversion
+
+# only deal with configs if we are going to build for the arch
+%ifnarch %nobuildarches
+
+mkdir configs
+
+# Remove configs not for the buildarch
+for cfg in kernel-%{version}-*.config; do
+ if [ `echo %{all_arch_configs} | grep -c $cfg` -eq 0 ]; then
+ rm -f $cfg
+ fi
+done
+
+%if !%{debugbuildsenabled}
+rm -f kernel-%{version}-*debug.config
+%endif
+
+# now run oldconfig over all the config files
+for i in *.config
+do
+ mv $i .config
+ Arch=`head -1 .config | cut -b 3-`
+ make ARCH=$Arch listnewconfig | grep -E '^CONFIG_' >.newoptions || true
+%if %{listnewconfig_fail}
+ if [ -s .newoptions ]; then
+ cat .newoptions
+ exit 1
+ fi
+%endif
+ rm -f .newoptions
+ make ARCH=$Arch oldnoconfig
+ echo "# $Arch" > configs/$i
+ cat .config >> configs/$i
+done
+# end of kernel config
+%endif
+
+# get rid of unwanted files resulting from patch fuzz
+find . \( -name "*.orig" -o -name "*~" \) -exec rm -f {} \; >/dev/null
+
+# remove unnecessary SCM files
+find . -name .gitignore -exec rm -f {} \; >/dev/null
+
+cd ..
+
+###
+### build
+###
+%build
+
+%if %{with_sparse}
+%define sparse_mflags C=1
+%endif
+
+%if %{fancy_debuginfo}
+# This override tweaks the kernel makefiles so that we run debugedit on an
+# object before embedding it. When we later run find-debuginfo.sh, it will
+# run debugedit again. The edits it does change the build ID bits embedded
+# in the stripped object, but repeating debugedit is a no-op. We do it
+# beforehand to get the proper final build ID bits into the embedded image.
+# This affects the vDSO images in vmlinux, and the vmlinux image in bzImage.
+export AFTER_LINK=\
+'sh -xc "/usr/lib/rpm/debugedit -b $$RPM_BUILD_DIR -d /usr/src/debug \
+ -i $@ > $@.id"'
+%endif
+
+cp_vmlinux()
+{
+ eu-strip --remove-comment -o "$2" "$1"
+}
+
+BuildKernel() {
+ MakeTarget=$1
+ KernelImage=$2
+ Flavour=$3
+ InstallName=${4:-vmlinuz}
+
+ # Pick the right config file for the kernel we're building
+ Config=kernel-%{version}-%{_target_cpu}${Flavour:+-${Flavour}}.config
+ DevelDir=/usr/src/kernels/%{KVERREL}${Flavour:+.${Flavour}}
+
+ # When the bootable image is just the ELF kernel, strip it.
+ # We already copy the unstripped file into the debuginfo package.
+ if [ "$KernelImage" = vmlinux ]; then
+ CopyKernel=cp_vmlinux
+ else
+ CopyKernel=cp
+ fi
+
+ KernelVer=%{version}-%{release}.%{_target_cpu}${Flavour:+.${Flavour}}
+ echo BUILDING A KERNEL FOR ${Flavour} %{_target_cpu}...
+
+ %if 0%{?stable_update}
+ # make sure SUBLEVEL is incremented on a stable release. Sigh 3.x.
+ perl -p -i -e "s/^SUBLEVEL.*/SUBLEVEL = %{?stablerev}/" Makefile
+ %endif
+
+ # make sure EXTRAVERSION says what we want it to say
+ perl -p -i -e "s/^EXTRAVERSION.*/EXTRAVERSION = -%{release}.%{_target_cpu}${Flavour:+.${Flavour}}/" Makefile
+
+ # if pre-rc1 devel kernel, must fix up PATCHLEVEL for our versioning scheme
+ %if !0%{?rcrev}
+ %if 0%{?gitrev}
+ perl -p -i -e 's/^PATCHLEVEL.*/PATCHLEVEL = %{upstream_sublevel}/' Makefile
+ %endif
+ %endif
+
+ # and now to start the build process
+
+ make -s mrproper
+ cp configs/$Config .config
+
+ Arch=`head -1 .config | cut -b 3-`
+ echo USING ARCH=$Arch
+
+ make -s ARCH=$Arch oldnoconfig >/dev/null
+ make -s ARCH=$Arch V=1 %{?_smp_mflags} $MakeTarget %{?sparse_mflags}
+ make -s ARCH=$Arch V=1 %{?_smp_mflags} modules %{?sparse_mflags} || exit 1
+
+ # Start installing the results
+%if %{with_debuginfo}
+ mkdir -p $RPM_BUILD_ROOT%{debuginfodir}/boot
+ mkdir -p $RPM_BUILD_ROOT%{debuginfodir}/%{image_install_path}
+%endif
+ mkdir -p $RPM_BUILD_ROOT/%{image_install_path}
+ install -m 644 .config $RPM_BUILD_ROOT/boot/config-$KernelVer
+ install -m 644 System.map $RPM_BUILD_ROOT/boot/System.map-$KernelVer
+
+ # We estimate the size of the initramfs because rpm needs to take this size
+ # into consideration when performing disk space calculations. (See bz #530778)
+ dd if=/dev/zero of=$RPM_BUILD_ROOT/boot/initramfs-$KernelVer.img bs=1M count=20
+
+ if [ -f arch/$Arch/boot/zImage.stub ]; then
+ cp arch/$Arch/boot/zImage.stub $RPM_BUILD_ROOT/%{image_install_path}/zImage.stub-$KernelVer || :
+ fi
+ $CopyKernel $KernelImage \
+ $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer
+ chmod 755 $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer
+
+ mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer
+ # Override $(mod-fw) because we don't want it to install any firmware
+ # We'll do that ourselves with 'make firmware_install'
+ make -s ARCH=$Arch INSTALL_MOD_PATH=$RPM_BUILD_ROOT modules_install KERNELRELEASE=$KernelVer mod-fw=
+%ifarch %{vdso_arches}
+ make -s ARCH=$Arch INSTALL_MOD_PATH=$RPM_BUILD_ROOT vdso_install KERNELRELEASE=$KernelVer
+ if [ ! -s ldconfig-kernel.conf ]; then
+ echo > ldconfig-kernel.conf "\
+# Placeholder file, no vDSO hwcap entries used in this kernel."
+ fi
+ %{__install} -D -m 444 ldconfig-kernel.conf \
+ $RPM_BUILD_ROOT/etc/ld.so.conf.d/kernel-$KernelVer.conf
+%endif
+
+ # And save the headers/makefiles etc for building modules against
+ #
+ # This all looks scary, but the end result is supposed to be:
+ # * all arch relevant include/ files
+ # * all Makefile/Kconfig files
+ # * all script/ files
+
+ rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
+ rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/source
+ mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
+ (cd $RPM_BUILD_ROOT/lib/modules/$KernelVer ; ln -s build source)
+ # dirs for additional modules per module-init-tools, kbuild/modules.txt
+ mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/extra
+ mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/updates
+ # first copy everything
+ cp --parents `find -type f -name "Makefile*" -o -name "Kconfig*"` $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
+ cp Module.symvers $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
+ cp System.map $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
+ if [ -s Module.markers ]; then
+ cp Module.markers $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
+ fi
+ # then drop all but the needed Makefiles/Kconfig files
+ rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/Documentation
+ rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts
+ rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include
+ cp .config $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
+ cp -a scripts $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
+ if [ -d arch/$Arch/scripts ]; then
+ cp -a arch/$Arch/scripts $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/arch/%{_arch} || :
+ fi
+ if [ -f arch/$Arch/*lds ]; then
+ cp -a arch/$Arch/*lds $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/arch/%{_arch}/ || :
+ fi
+ rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts/*.o
+ rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts/*/*.o
+%ifarch ppc
+ cp -a --parents arch/powerpc/lib/crtsavres.[So] $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
+%endif
+ if [ -d arch/%{asmarch}/include ]; then
+ cp -a --parents arch/%{asmarch}/include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
+ fi
+ cp -a include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include
+
+ # Make sure the Makefile and version.h have a matching timestamp so that
+ # external modules can be built
+ touch -r $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/Makefile $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include/linux/version.h
+ touch -r $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/.config $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include/linux/autoconf.h
+ # Copy .config to include/config/auto.conf so "make prepare" is unnecessary.
+ cp $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/.config $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include/config/auto.conf
+
+%if %{fancy_debuginfo}
+ if test -s vmlinux.id; then
+ cp vmlinux.id $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/vmlinux.id
+ else
+ echo >&2 "*** ERROR *** no vmlinux build ID! ***"
+ exit 1
+ fi
+%endif
+
+ #
+ # save the vmlinux file for kernel debugging into the kernel-debuginfo rpm
+ #
+%if %{with_debuginfo}
+ mkdir -p $RPM_BUILD_ROOT%{debuginfodir}/lib/modules/$KernelVer
+ cp vmlinux $RPM_BUILD_ROOT%{debuginfodir}/lib/modules/$KernelVer
+%endif
+
+ find $RPM_BUILD_ROOT/lib/modules/$KernelVer -name "*.ko" -type f >modnames
+
+ # mark modules executable so that strip-to-file can strip them
+ xargs --no-run-if-empty chmod u+x < modnames
+
+ # Generate a list of modules for block and networking.
+
+ grep -F /drivers/ modnames | xargs --no-run-if-empty nm -upA |
+ sed -n 's,^.*/\([^/]*\.ko\): *U \(.*\)$,\1 \2,p' > drivers.undef
+
+ collect_modules_list()
+ {
+ sed -r -n -e "s/^([^ ]+) \\.?($2)\$/\\1/p" drivers.undef |
+ LC_ALL=C sort -u > $RPM_BUILD_ROOT/lib/modules/$KernelVer/modules.$1
+ }
+
+ collect_modules_list networking \
+ 'register_netdev|ieee80211_register_hw|usbnet_probe|phy_driver_register|rt2x00(pci|usb)_probe'
+ collect_modules_list block \
+ 'ata_scsi_ioctl|scsi_add_host|scsi_add_host_with_dma|blk_init_queue|register_mtd_blktrans|scsi_esp_register|scsi_register_device_handler'
+ collect_modules_list drm \
+ 'drm_open|drm_init'
+ collect_modules_list modesetting \
+ 'drm_crtc_init'
+
+ # detect missing or incorrect license tags
+ rm -f modinfo
+ while read i
+ do
+ echo -n "${i#$RPM_BUILD_ROOT/lib/modules/$KernelVer/} " >> modinfo
+ /sbin/modinfo -l $i >> modinfo
+ done < modnames
+
+ grep -E -v \
+ 'GPL( v2)?$|Dual BSD/GPL$|Dual MPL/GPL$|GPL and additional rights$' \
+ modinfo && exit 1
+
+ rm -f modinfo modnames
+
+ # remove files that will be auto generated by depmod at rpm -i time
+ for i in alias alias.bin builtin.bin ccwmap dep dep.bin ieee1394map inputmap isapnpmap ofmap pcimap seriomap symbols symbols.bin usbmap
+ do
+ rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/modules.$i
+ done
+
+ # Move the devel headers out of the root file system
+ mkdir -p $RPM_BUILD_ROOT/usr/src/kernels
+ mv $RPM_BUILD_ROOT/lib/modules/$KernelVer/build $RPM_BUILD_ROOT/$DevelDir
+ ln -sf ../../..$DevelDir $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
+
+ # prune junk from kernel-devel
+ find $RPM_BUILD_ROOT/usr/src/kernels -name ".*.cmd" -exec rm -f {} \;
+}
+
+###
+# DO it...
+###
+
+# prepare directories
+rm -rf $RPM_BUILD_ROOT
+mkdir -p $RPM_BUILD_ROOT/boot
+mkdir -p $RPM_BUILD_ROOT%{_libexecdir}
+
+cd linux-%{kversion}.%{_target_cpu}
+
+%if %{with_debug}
+BuildKernel %make_target %kernel_image debug
+%endif
+
+%if %{with_pae_debug}
+BuildKernel %make_target %kernel_image PAEdebug
+%endif
+
+%if %{with_pae}
+BuildKernel %make_target %kernel_image PAE
+%endif
+
+%if %{with_omap}
+BuildKernel %make_target %kernel_image omap
+%endif
+
+%if %{with_tegra}
+BuildKernel %make_target %kernel_image tegra
+%endif
+
+%if %{with_up}
+BuildKernel %make_target %kernel_image
+%endif
+
+%if %{with_smp}
+BuildKernel %make_target %kernel_image smp
+%endif
+
+%if %{with_tools}
+# perf
+make %{?_smp_mflags} -C tools/perf -s V=1 HAVE_CPLUS_DEMANGLE=1 prefix=%{_prefix} all
+make %{?_smp_mflags} -C tools/perf -s V=1 prefix=%{_prefix} man || %{doc_build_fail}
+
+%ifarch %{cpupowerarchs}
+# cpupower
+# make sure version-gen.sh is executable.
+chmod +x tools/power/cpupower/utils/version-gen.sh
+make %{?_smp_mflags} -C tools/power/cpupower CPUFREQ_BENCH=false
+%ifarch %{ix86}
+ cd tools/power/cpupower/debug/i386
+ make %{?_smp_mflags} centrino-decode powernow-k8-decode
+ cd -
+%endif
+%ifarch x86_64
+ cd tools/power/cpupower/debug/x86_64
+ make %{?_smp_mflags} centrino-decode powernow-k8-decode
+ cd -
+%endif
+%endif
+%endif
+
+%if %{with_doc}
+# Make the HTML and man pages.
+make htmldocs mandocs || %{doc_build_fail}
+
+# sometimes non-world-readable files sneak into the kernel source tree
+chmod -R a=rX Documentation
+find Documentation -type d | xargs chmod u+w
+%endif
+
+###
+### Special hacks for debuginfo subpackages.
+###
+
+# This macro is used by %%install, so we must redefine it before that.
+%define debug_package %{nil}
+
+%if %{fancy_debuginfo}
+%define __debug_install_post \
+ /usr/lib/rpm/find-debuginfo.sh %{debuginfo_args} %{_builddir}/%{?buildsubdir}\
+%{nil}
+%endif
+
+%if %{with_debuginfo}
+%ifnarch noarch
+%global __debug_package 1
+%files -f debugfiles.list debuginfo-common-%{_target_cpu}
+%defattr(-,root,root)
+%endif
+%endif
+
+###
+### install
+###
+
+%install
+
+cd linux-%{kversion}.%{_target_cpu}
+
+%if %{with_doc}
+docdir=$RPM_BUILD_ROOT%{_datadir}/doc/kernel-doc-%{rpmversion}
+man9dir=$RPM_BUILD_ROOT%{_datadir}/man/man9
+
+# copy the source over
+mkdir -p $docdir
+tar -f - --exclude=man --exclude='.*' -c Documentation | tar xf - -C $docdir
+
+# Install man pages for the kernel API.
+mkdir -p $man9dir
+find Documentation/DocBook/man -name '*.9.gz' -print0 |
+xargs -0 --no-run-if-empty %{__install} -m 444 -t $man9dir $m
+ls $man9dir | grep -q '' || > $man9dir/BROKEN
+%endif # with_doc
+
+# We have to do the headers install before the tools install because the
+# kernel headers_install will remove any header files in /usr/include that
+# it doesn't install itself.
+
+%if %{with_headers}
+# Install kernel headers
+make ARCH=%{hdrarch} INSTALL_HDR_PATH=$RPM_BUILD_ROOT/usr headers_install
+
+# Do headers_check but don't die if it fails.
+make ARCH=%{hdrarch} INSTALL_HDR_PATH=$RPM_BUILD_ROOT/usr headers_check \
+ > hdrwarnings.txt || :
+if grep -q exist hdrwarnings.txt; then
+ sed s:^$RPM_BUILD_ROOT/usr/include/:: hdrwarnings.txt
+ # Temporarily cause a build failure if header inconsistencies.
+ # exit 1
+fi
+
+find $RPM_BUILD_ROOT/usr/include \
+ \( -name .install -o -name .check -o \
+ -name ..install.cmd -o -name ..check.cmd \) | xargs rm -f
+
+# glibc provides scsi headers for itself, for now
+rm -rf $RPM_BUILD_ROOT/usr/include/scsi
+rm -f $RPM_BUILD_ROOT/usr/include/asm*/atomic.h
+rm -f $RPM_BUILD_ROOT/usr/include/asm*/io.h
+rm -f $RPM_BUILD_ROOT/usr/include/asm*/irq.h
+%endif
+
+%if %{with_tools}
+# perf tool binary and supporting scripts/binaries
+make -C tools/perf -s V=1 DESTDIR=$RPM_BUILD_ROOT HAVE_CPLUS_DEMANGLE=1 prefix=%{_prefix} install
+
+# perf man pages (note: implicit rpm magic compresses them later)
+make -C tools/perf -s V=1 DESTDIR=$RPM_BUILD_ROOT HAVE_CPLUS_DEMANGLE=1 prefix=%{_prefix} install-man || %{doc_build_fail}
+
+%ifarch %{cpupowerarchs}
+make -C tools/power/cpupower DESTDIR=$RPM_BUILD_ROOT libdir=%{_libdir} mandir=%{_mandir} CPUFREQ_BENCH=false install
+rm -f %{buildroot}%{_libdir}/*.{a,la}
+%find_lang cpupower
+mv cpupower.lang ../
+%ifarch %{ix86}
+ cd tools/power/cpupower/debug/i386
+ install -m755 centrino-decode %{buildroot}%{_bindir}/centrino-decode
+ install -m755 powernow-k8-decode %{buildroot}%{_bindir}/powernow-k8-decode
+ cd -
+%endif
+%ifarch x86_64
+ cd tools/power/cpupower/debug/x86_64
+ install -m755 centrino-decode %{buildroot}%{_bindir}/centrino-decode
+ install -m755 powernow-k8-decode %{buildroot}%{_bindir}/powernow-k8-decode
+ cd -
+%endif
+chmod 0755 %{buildroot}%{_libdir}/libcpupower.so*
+mkdir -p %{buildroot}%{_unitdir} %{buildroot}%{_sysconfdir}/sysconfig
+install -m644 %{SOURCE2000} %{buildroot}%{_unitdir}/cpupower.service
+install -m644 %{SOURCE2001} %{buildroot}%{_sysconfdir}/sysconfig/cpupower
+%endif
+
+%endif
+
+%if %{with_bootwrapper}
+make DESTDIR=$RPM_BUILD_ROOT bootwrapper_install WRAPPER_OBJDIR=%{_libdir}/kernel-wrapper WRAPPER_DTSDIR=%{_libdir}/kernel-wrapper/dts
+%endif
+
+
+###
+### clean
+###
+
+%clean
+rm -rf $RPM_BUILD_ROOT
+
+###
+### scripts
+###
+
+%if %{with_tools}
+%post -n kernel-tools
+/sbin/ldconfig
+
+%postun -n kernel-tools
+/sbin/ldconfig
+%endif
+
+#
+# This macro defines a %%post script for a kernel*-devel package.
+# %%kernel_devel_post [<subpackage>]
+#
+%define kernel_devel_post() \
+%{expand:%%post %{?1:%{1}-}devel}\
+if [ -f /etc/sysconfig/kernel ]\
+then\
+ . /etc/sysconfig/kernel || exit $?\
+fi\
+if [ "$HARDLINK" != "no" -a -x /usr/sbin/hardlink ]\
+then\
+ (cd /usr/src/kernels/%{KVERREL}%{?1:.%{1}} &&\
+ /usr/bin/find . -type f | while read f; do\
+ hardlink -c /usr/src/kernels/*.fc*.*/$f $f\
+ done)\
+fi\
+%{nil}
+
+
+# This macro defines a %%posttrans script for a kernel package.
+# %%kernel_variant_posttrans [<subpackage>]
+# More text can follow to go at the end of this variant's %%post.
+#
+%define kernel_variant_posttrans() \
+%{expand:%%posttrans %{?1}}\
+/sbin/new-kernel-pkg --package kernel%{?-v:-%{-v*}} --mkinitrd --dracut --depmod --update %{KVERREL}%{?-v:.%{-v*}} || exit $?\
+/sbin/new-kernel-pkg --package kernel%{?1:-%{1}} --rpmposttrans %{KVERREL}%{?1:.%{1}} || exit $?\
+pushd /boot || exit $?\
+/bin/ln -sf config-%{KVERREL}%{?1:.%{1}} config || exit $?\
+/bin/ln -sf config-%{KVERREL}%{?1:.%{1}} configsmp || exit $?\
+/bin/ln -sf initrd-%{KVERREL}%{?1:.%{1}}.img initrd-boot || exit $?\
+/bin/ln -sf initrd-%{KVERREL}%{?1:.%{1}}.img initrd-bootsmp || exit $?\
+/bin/ln -sf vmlinuz-%{KVERREL}%{?1:.%{1}} kernel-boot || exit $?\
+/bin/ln -sf vmlinuz-%{KVERREL}%{?1:.%{1}} kernel-bootsmp || exit $?\
+popd || exit $?\
+/bin/mkdir -p /etc/planetlab || exit $?\
+/bin/touch /etc/planetlab/update-reboot || exit $?\
+%{nil}
+
+#
+# This macro defines a %%post script for a kernel package and its devel package.
+# %%kernel_variant_post [-v <subpackage>] [-r <replace>]
+# More text can follow to go at the end of this variant's %%post.
+#
+%define kernel_variant_post(v:r:) \
+%{expand:%%kernel_devel_post %{?-v*}}\
+%{expand:%%kernel_variant_posttrans %{?-v*}}\
+%{expand:%%post %{?-v*}}\
+%{-r:\
+if [ `uname -i` == "x86_64" -o `uname -i` == "i386" ] &&\
+ [ -f /etc/sysconfig/kernel ]; then\
+ /bin/sed -r -i -e 's/^DEFAULTKERNEL=%{-r*}$/DEFAULTKERNEL=kernel%{?-v:-%{-v*}}/' /etc/sysconfig/kernel || exit $?\
+fi}\
+%{expand:\
+/sbin/new-kernel-pkg --package kernel%{?-v:-%{-v*}} --install %{KVERREL}%{?-v:.%{-v*}} || exit $?\
+}\
+%{nil}
+
+#
+# This macro defines a %%preun script for a kernel package.
+# %%kernel_variant_preun <subpackage>
+#
+%define kernel_variant_preun() \
+%{expand:%%preun %{?1}}\
+/sbin/new-kernel-pkg --rminitrd --rmmoddep --remove %{KVERREL}%{?1:.%{1}} || exit $?\
+%{nil}
+
+%kernel_variant_preun
+%kernel_variant_post -r kernel-smp
+
+%kernel_variant_preun smp
+%kernel_variant_post -v smp
+
+%kernel_variant_preun PAE
+%kernel_variant_post -v PAE -r (kernel|kernel-smp)
+
+%kernel_variant_preun debug
+%kernel_variant_post -v debug
+
+%kernel_variant_post -v PAEdebug -r (kernel|kernel-smp)
+%kernel_variant_preun PAEdebug
+
+%kernel_variant_preun omap
+%kernel_variant_post -v omap
+
+%kernel_variant_preun tegra
+%kernel_variant_post -v tegra
+
+pushd /boot || exit $?
+/bin/ln -sf config-%{KVERREL}%{?1:.%{1}} config || exit $?
+/bin/ln -sf config-%{KVERREL}%{?1:.%{1}} configsmp || exit $?
+/bin/ln -sf initrd-%{KVERREL}%{?1:.%{1}}.img initrd-boot || exit $?
+/bin/ln -sf initrd-%{KVERREL}%{?1:.%{1}}.img initrd-bootsmp || exit $?
+/bin/ln -sf vmlinuz-%{KVERREL}%{?1:.%{1}} kernel-boot || exit $?
+/bin/ln -sf vmlinuz-%{KVERREL}%{?1:.%{1}} kernel-bootsmp || exit $?
+popd || exit $?
+/bin/mkdir -p /etc/planetlab || exit $?
+/bin/touch /etc/planetlab/update-reboot || exit $?
+
+if [ -x /sbin/ldconfig ]
+then
+ /sbin/ldconfig -X || exit $?
+fi
+
+###
+### file lists
+###
+
+%if %{with_headers}
+%files headers
+%defattr(-,root,root)
+/usr/include/*
+%endif
+
+%if %{with_bootwrapper}
+%files bootwrapper
+%defattr(-,root,root)
+/usr/sbin/*
+%{_libdir}/kernel-wrapper
+%endif
+
+# only some architecture builds need kernel-doc
+%if %{with_doc}
+%files doc
+%defattr(-,root,root)
+%{_datadir}/doc/kernel-doc-%{rpmversion}/Documentation/*
+%dir %{_datadir}/doc/kernel-doc-%{rpmversion}/Documentation
+%dir %{_datadir}/doc/kernel-doc-%{rpmversion}
+%{_datadir}/man/man9/*
+%endif
+
+%if %{with_tools}
+%files -n kernel-tools -f cpupower.lang
+%defattr(-,root,root)
+%{_bindir}/perf
+%dir %{_libexecdir}/perf-core
+%{_libexecdir}/perf-core/*
+%{_mandir}/man[1-8]/*
+
+%ifarch %{cpupowerarchs}
+%{_bindir}/cpupower
+%ifarch %{ix86} x86_64
+%{_bindir}/centrino-decode
+%{_bindir}/powernow-k8-decode
+%endif
+%{_libdir}/libcpupower.so.0
+%{_libdir}/libcpupower.so.0.0.0
+%{_unitdir}/cpupower.service
+%config(noreplace) %{_sysconfdir}/sysconfig/cpupower
+%endif
+
+%if %{with_debuginfo}
+%files -f kernel-tools-debuginfo.list -n kernel-tools-debuginfo
+%defattr(-,root,root)
+%endif
+
+%ifarch %{cpupowerarchs}
+%files -n kernel-tools-devel
+%{_libdir}/libcpupower.so
+%{_includedir}/cpufreq.h
+%endif
+%endif
+
+# This is %%{image_install_path} on an arch where that includes ELF files,
+# or empty otherwise.
+%define elf_image_install_path %{?kernel_image_elf:%{image_install_path}}
+
+#
+# This macro defines the %%files sections for a kernel package
+# and its devel and debuginfo packages.
+# %%kernel_variant_files [-k vmlinux] <condition> <subpackage>
+#
+%define kernel_variant_files(k:) \
+%if %{1}\
+%{expand:%%files %{?2}}\
+%defattr(-,root,root)\
+/%{image_install_path}/%{?-k:%{-k*}}%{!?-k:vmlinuz}-%{KVERREL}%{?2:.%{2}}\
+%attr(600,root,root) /boot/System.map-%{KVERREL}%{?2:.%{2}}\
+/boot/config-%{KVERREL}%{?2:.%{2}}\
+%dir /lib/modules/%{KVERREL}%{?2:.%{2}}\
+/lib/modules/%{KVERREL}%{?2:.%{2}}/kernel\
+/lib/modules/%{KVERREL}%{?2:.%{2}}/build\
+/lib/modules/%{KVERREL}%{?2:.%{2}}/source\
+/lib/modules/%{KVERREL}%{?2:.%{2}}/extra\
+/lib/modules/%{KVERREL}%{?2:.%{2}}/updates\
+%ifarch %{vdso_arches}\
+/lib/modules/%{KVERREL}%{?2:.%{2}}/vdso\
+/etc/ld.so.conf.d/kernel-%{KVERREL}%{?2:.%{2}}.conf\
+%endif\
+/lib/modules/%{KVERREL}%{?2:.%{2}}/modules.*\
+%ghost /boot/initramfs-%{KVERREL}%{?2:.%{2}}.img\
+%{expand:%%files %{?2:%{2}-}devel}\
+%defattr(-,root,root)\
+/usr/src/kernels/%{KVERREL}%{?2:.%{2}}\
+%if %{with_debuginfo}\
+%ifnarch noarch\
+%if %{fancy_debuginfo}\
+%{expand:%%files -f debuginfo%{?2}.list %{?2:%{2}-}debuginfo}\
+%else\
+%{expand:%%files %{?2:%{2}-}debuginfo}\
+%endif\
+%defattr(-,root,root)\
+%if !%{fancy_debuginfo}\
+%if "%{elf_image_install_path}" != ""\
+%{debuginfodir}/%{elf_image_install_path}/*-%{KVERREL}%{?2:.%{2}}.debug\
+%endif\
+%{debuginfodir}/lib/modules/%{KVERREL}%{?2:.%{2}}\
+%{debuginfodir}/usr/src/kernels/%{KVERREL}%{?2:.%{2}}\
+%endif\
+%endif\
+%endif\
+%endif\
+%{nil}
+
+
+%kernel_variant_files %{with_up}
+%kernel_variant_files %{with_smp} smp
+%kernel_variant_files %{with_debug} debug
+%kernel_variant_files %{with_pae} PAE
+%kernel_variant_files %{with_pae_debug} PAEdebug
+%kernel_variant_files %{with_omap} omap
+%kernel_variant_files %{with_tegra} tegra
+
+# plz don't put in a version string unless you're going to tag
+# and build.
+
+%changelog
+* Tue Nov 1 2011 Josh Boyer <jwboyer@redhat.com> 3.1.0-7
+- Drop x86-efi-Calling-__pa-with-an-ioremap-address-is-invalid (rhbz 748516)
+
+* Mon Oct 31 2011 Josh Boyer <jwboyer@redhat.com>
+- CVE-2011-4097: oom_badness() integer overflow (rhbz 750402)
+
+* Fri Oct 28 2011 Josh Boyer <jwboyer@redhat.com>
+- Add patch to prevent tracebacks on a warning in floppy.c (rhbz 749887)
+
+* Wed Oct 26 2011 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 3.1.0-5
+- Rebuilt for glibc bug#747377
+
+* Wed Oct 26 2011 Josh Boyer <jwboyer@redhat.com>
+- CVE-2011-4077: xfs: potential buffer overflow in xfs_readlink() (rhbz 749166)
+
+* Tue Oct 25 2011 Josh Boyer <jwboyer@redhat.com>
+- CVE-2011-3347: be2net: promiscuous mode and non-member VLAN packets DoS (rhbz 748691)
+- CVE-2011-1083: excessive in kernel CPU consumption when creating large nested epoll structures (rhbz 748668)
+
+* Mon Oct 24 2011 Josh Boyer <jwboyer@redhat.com>
+- Backport 3 fixed from linux-next to fix dib0700 playback (rhbz 733827)
+
+* Mon Oct 24 2011 Chuck Ebbert <cebbert@redhat.com> 3.1.0-1
+- Linux 3.1
+
+* Fri Oct 21 2011 Chuck Ebbert <cebbert@redhat.com> 3.1.0-0.rc10.git1.1
+- Update to upstream HEAD (v3.1-rc10-42-g2efd7c0)
+
+* Fri Oct 21 2011 Dave Jones <davej@redhat.com>
+- Lower severity of Radeon lockup messages.
+
+* Wed Oct 19 2011 Dave Jones <davej@redhat.com>
+- Add Sony VGN-FW21E to nonvs blacklist. (rhbz 641789)
+
+* Wed Oct 19 2011 Chuck Ebbert <cebbert@redhat.com> 3.1.0-0.rc10.git0.1
+- Fix divide-by-zero in nouveau driver (rhbz #747129)
+
+* Tue Oct 18 2011 Chuck Ebbert <cebbert@redhat.com>
+- Fix lock inversion causing hangs in 3.1-rc9 (rhbz #746485)
+- Linux 3.1-rc10
+
+* Tue Oct 18 2011 Josh Boyer <jwboyer@redhat.com>
+- Add patch to fix invalid EFI remap calls from Matt Fleming
+
+* Mon Oct 17 2011 Josh Boyer <jwboyer@redhat.com>
+- Add two patches to fix stalls in khugepaged (rhbz 735946)
+
+* Thu Oct 13 2011 Josh Boyer <jwboyer@redhat.com>
+- Update usb-add-quirk-for-logitech-webcams.patch with C600 ID (rhbz 742010)
+
+* Thu Oct 13 2011 Adam Jackson <ajax@redhat.com>
+- drm/i915: Treat SDVO LVDS as digital when parsing EDID (#729882)
+
+* Thu Oct 13 2011 Josh Boyer <jwboyer@redhat.com>
+- Add patch from Stanislaw Gruszka to fix iwlagn NULL dereference (rhbz 744155)
+
+* Tue Oct 11 2011 Josh Boyer <jwboyer@redhat.com>
+- Disable CONFIG_XEN_BALLOON_MEMORY_HOTPLUG (rhbz 744408)
+
+* Thu Oct 06 2011 Josh Boyer <jwboyer@redhat.com>
+- Add patch to fix base frequency check for Ricoh e823 devices (rhbz 722509)
+
+* Thu Oct 06 2011 Dave Jones <davej@redhat.com>
+- Taint if virtualbox modules have been loaded.
+
+* Wed Oct 05 2011 Chuck Ebbert <cebbert@redhat.com> 3.1.0-0.rc9.git0.0
+- Linux 3.1-rc9
+
+* Mon Oct 03 2011 Chuck Ebbert <cebbert@redhat.com> 3.1.0-0.rc8.git0.1
+- block: Free queue resources at blk_release_queue()
+
+* Thu Sep 29 2011 Chuck Ebbert <cebbert@redhat.com>
+- Require grubby >= 8.3-1 so initrd line gets added (rhbz #725185)
+
+* Thu Sep 29 2011 Josh Boyer <jwboyer@redhat.com>
+- Update logitech USB quirk patch
+
+* Tue Sep 27 2011 Chuck Ebbert <cebbert@redhat.com> 3.1.0-0.rc8.git0.0
+- Linux 3.1-rc8
+- New option: CONFIG_ARM_ERRATA_764369 is not set
+- Fix up utrace.patch to apply after commit f9d81f61c
+
+* Thu Sep 22 2011 Dave Jones <davej@redhat.com>
+- Make CONFIG_XEN_PLATFORM_PCI=y (rhbz 740664)
+
+* Thu Sep 22 2011 Dennis Gilmore <dennis@ausil.us>
+- build vmlinux image for sparc64
+
+* Wed Sep 21 2011 Josh Boyer <jwboyer@redhat.com>
+- Linux 3.1-rc7
+
+* Tue Sep 20 2011 Dave Jones <davej@redhat.com>
+- Limit 32-bit x86 kernels to 32 processors.
+
+* Tue Sep 20 2011 Ben Skeggs <bskeggs@redhat.com> 3.1.0-0.rc6.git0.4.fc16
+- nouveau: patch in updates queued for 3.2, mostly new hw support (GF116/GF119)
+
+* Fri Sep 16 2011 Josh Boyer <jwboyer@redhat.com> 3.1.0-0.rc6.git0.3.fc16
+- Add patch to fix deadlock in ipw2x00 (rhbz 738387)
+- Fixup kernel-tools file section for ppc/ppc64
+
+* Thu Sep 15 2011 Josh Boyer <jwboyer@redhat.com>
+- CVE-2011-3191: cifs: fix possible memory corruption in CIFSFindNext
+
+* Wed Sep 14 2011 Josh Boyer <jwboyer@redhat.com>
+- Add patch to fix deadlock in ppc64 icswx (rhbz 737984)
+
+* Wed Sep 14 2011 Neil Horman <nhorman@redhat.com>
+- Enable CONFIG_IP_VS_IPV6 (bz 738194)
+
+* Wed Sep 14 2011 Josh Boyer <jwboyer@redhat.com>
+- Add support for Macbook Air 4,1 keyboard, trackpad, and bluetooth
+- Add patch to fix HVCS on ppc64 (rhbz 738096)
+- Add various ibmveth driver fixes (rhbz 733766)
+
+* Tue Sep 13 2011 Adam Jackson <ajax@redhat.com>
+- drm/i915: Shut the fbc messages up when drm.debug & 4
+
+* Mon Sep 12 2011 Josh Boyer <jwboyer@redhat.com> 3.1.0-0.rc6.git0.0
+- Linux 3.1-rc6 (contains the fix for 737076)
+- Disable debug builds
+
+* Fri Sep 09 2011 Josh Boyer <jwboyer@redhat.com>
+- Change to 64K page size for ppc64 kernels (rhbz 736751)
+
+* Fri Sep 09 2011 Josh Boyer <jwboyer@redhat.com> 3.1.0-0.rc5.git0.0
+- Linux 3.1-rc5
+
+* Wed Sep 07 2011 Josh Boyer <jwboyer@redhat.com>
+- Add patch to fix oops when linking entities in ucvideo (rhbz 735437)
+
+* Fri Sep 02 2011 Dave Jones <davej@redhat.com>
+- Apply patch to fix lockdep reports from ext4 (rhbz 732572)
+
+* Thu Sep 01 2011 Dave Jones <davej@redhat.com>
+- utrace: s390: fix the compile problem with traps.c (rhbz 735118)
+
+* Tue Aug 30 2011 Dave Jones <davej@redhat.com>
+- Revert "x86: Serialize EFI time accesses on rtc_lock" (rhbz 732755)
+
+* Tue Aug 30 2011 Josh Boyer <jwboyer@redhat.com>
+- Add patch to fix rhbz 606017
+
+* Mon Aug 29 2011 Josh Boyer <jwboyer@redhat.com>
+- Linux 3.1-rc4
+
+* Sat Aug 27 2011 Dave Jones <davej@redhat.com>
+- Fix get_gate_vma usage in i386 NX emulation
+- Bring back the 32bit mmap randomization patch for now.
+ NX emulation is still too dependant upon it.
+
+* Fri Aug 26 2011 Dave Jones <davej@redhat.com>
+- Enable CONFIG_DETECT_HUNG_TASK for debug builds & rawhide.
+
+* Fri Aug 26 2011 Dave Jones <davej@redhat.com>
+- Drop linux-2.6-debug-vm-would-have-oomkilled.patch
+ The oom-killer heuristics have improved enough that this should
+ never be necessary (and it probably doesn't dtrt any more)
+
+* Fri Aug 26 2011 Dave Jones <davej@redhat.com>
+- Drop linux-2.6-32bit-mmap-exec-randomization.patch
+ Outlived it's usefulness (and made of ugly)
+
+* Fri Aug 26 2011 Dave Jones <davej@redhat.com>
+- Drop acpi-ec-add-delay-before-write.patch (rhbz 733690)
+
+* Fri Aug 26 2011 Josh Boyer <jwboyer@redhat.com>
+- Linux 3.1-rc3-git5
+
+* Wed Aug 24 2011 Josh Boyer <jwboyer@redhat.com>
+- Revert 'iwlwifi: advertise max aggregate size'. (rhbz 708747)
+
+* Mon Aug 22 2011 Josh Boyer <jwboyer@redhat.com>
+- Linux 3.1-rc3
+- Add patch to fix duplicate backlight registration (rhbz 732202)
+
+* Mon Aug 22 2011 Dave Jones <davej@redhat.com>
+- Avoid false quiescent states in rcutree with CONFIG_RCU_FAST_NO_HZ. (rhbz 577968)
+
+* Sat Aug 20 2011 Josh Boyer <jwboyer@redhat.com>
+- Linux 3.1-rc2-git7
+- Add a provides/obsoletes for cpupowerutils-devel
+
+* Fri Aug 19 2011 Josh Boyer <jwboyer@redhat.com>
+- Add patch from upstream to fix 64-bit divide error in btrfs
+- Add BuildRequires on gettext for cpupowerutils translations
+
+* Fri Aug 19 2011 Josh Boyer <jwboyer@redhat.com>
+- Linux 3.1-rc2-git5
+- Change XHCI to builtin (rhbz 731706)
+- Add patch to fix race between cryptd and aesni (rhbz 721002)
+
+* Thu Aug 18 2011 Josh Boyer <jwboyer@redhat.com>
+- Adjust provides/obsoletes to replace the cpupowerutils package
+
+* Wed Aug 17 2011 Josh Boyer <jwboyer@redhat.com>
+- Create the kernel-tools subpackages based on a start by davej
+
+* Tue Aug 16 2011 Dave Jones <davej@redhat.com>
+- Prepare for packaging more of tools/ by renaming 'perf' subpackage
+ to kernel-tools
+
+* Tue Aug 16 2011 Dennis Gilmore <dennis@ausil.us>
+- add config for arm tegra devices
+- setup kernel to build omap image (patch from David Marlin)
+- setup kernel to build tegra image based on omap work
+- add arm device tree patches
+
+* Sat Aug 13 2011 Dave Jones <davej@redhat.com>
+- CPU_FREQ drivers should now be built-in on x86-64.
+
+* Thu Aug 11 2011 Josh Boyer <jwboyer@redhat.com>
+- Add patch davej applied to f15 for rhbz 729340
+- Add munged together patch for rhbz 729269
+- Build ide_pmac as a module (rhbz 730039)
+
+* Tue Aug 09 2011 Josh Boyer <jwboyer@redhat.com>
+- Add Makefile.config and ARM config changes from David Marlin
+
+* Tue Aug 09 2011 Josh Boyer <jwboyer@redhat.com>
+- Add patch davej applied to f15 for rhbz 728872
+
+* Tue Aug 09 2011 Dave Jones <davej@redhat.com>
+- ptrace_report_syscall: check if TIF_SYSCALL_EMU is defined
+
+* Tue Aug 09 2011 Dave Jones <davej@redhat.com>
+- Enable CONFIG_SAMSUNG_LAPTOP (rhbz 729363)
+
+* Mon Aug 08 2011 Josh Boyer <jwboyer@redhat.com>
+- Bring in utrace fixes davej applied to f15. (rhbz 728379)
+
+* Fri Aug 05 2011 Josh Boyer <jwboyer@redhat.com>
+- Adjust Makefile munging for new 3.x numbering scheme
+
+* Fri Aug 05 2011 Dave Jones <davej@redhat.com>
+- Deselect CONFIG_DECNET. Unmaintained, and rubbish.
+
+* Fri Aug 05 2011 Josh Boyer <jwboyer@redhat.com>
+- 3.0.1
+
+* Fri Aug 05 2011 Josh Boyer <jwboyer@redhat.com>
+- Add patch for rhbz 726701 from Matthew Garrett
+
+* Thu Aug 04 2011 Dave Jones <davej@redhat.com>
+- Drop neuter_intel_microcode_load.patch (rhbz 690930)
+
+* Wed Aug 03 2011 John W. Linville <linville@redhat.com>
+- Disable CONFIG_BCMA since no driver currently uses it (rhbz 727796)
+
+* Wed Aug 03 2011 Josh Boyer <jwboyer@redhat.com>
+- Add patch to fix backtrace in cdc_ncm driver (rhbz 720128)
+- Add patch to fix backtrace in usm-realtek driver (rhbz 720054)
+
+* Tue Aug 02 2011 Josh Boyer <jwboyer@redhat.com>
+- Add patch to fix HFSPlus filesystem mounting (rhbz 720771)
+
+* Tue Aug 02 2011 Dave Jones <davej@redhat.com>
+- Change USB_SERIAL_OPTION back to modular. (rhbz 727680)
+
+* Tue Aug 02 2011 Josh Boyer <jwboyer@redhat.com>
+- Fix epoll recursive lockdep warnings (rhbz 722472)
+- Turn debug builds back on
+
+* Tue Aug 02 2011 Josh Boyer <jwboyer@redhat.com>
+- Add change from Yanko Kaneti to get the rt2x00 drivers in modules.networking
+ (rhbz 708314)
+
+* Fri Jul 29 2011 Dave Jones <davej@redhat.com>
+- Fix scsi_dispatch_cmd oops (USB eject problems, etc).
+
+* Thu Jul 28 2011 Dave Jones <davej@redhat.com>
+- module-init-tools needs to be a prereq, not a conflict.
+
+* Thu Jul 28 2011 Josh Boyer <jwboyer@redhat.com>
+- Backport patch to correct udlfb removal events (rhbz 726163)
+
+* Wed Jul 27 2011 Dave Jones <davej@redhat.com>
+- Turn off debug builds.
+
+* Fri Jul 22 2011 Dave Jones <davej@redhat.com>
+- bootwrapper needs objcopy. Add it to requires: (wwoods)
+
+* Fri Jul 22 2011 Kyle McMartin <kmcmartin@redhat.com> 3.0.0-1
+- Linux 3.0, but really 3.0.0 (sigh)
+
+* Thu Jul 21 2011 Chuck Ebbert <cebbert@redhat.com> 3.0-0.rc7.git10.1
+- 3.0-rc7-git10
+- Use ext4 for ext2 and ext3 filesystems (CONFIG_EXT4_USE_FOR_EXT23=y)
+
+* Thu Jul 21 2011 Dave Jones <davej@redhat.com>
+- Switch BLK_DEV_RAM to be modular (rhbz 720833)
+
+* Wed Jul 20 2011 Chuck Ebbert <cebbert@redhat.com> 3.0-0.rc7.git8.1
+- 3.0-rc7-git8
+
+* Fri Jul 15 2011 Dave Jones <davej@redhat.com> 3.0-0.rc7.git3.1
+- 3.0-rc7-git3
+
+* Fri Jul 15 2011 Dave Jones <davej@redhat.com>
+- Bring back utrace until uprobes gets merged upstream.
+
+* Wed Jul 13 2011 Kyle McMartin <kmcmartin@redhat.com> 3.0-0.rc7.git1.1
+- Update to snapshot 3.0-rc7-git1 for intel drm fixes.
+
+* Tue Jul 12 2011 John W. Linville <linville@redhat.com>
+- zd1211rw: fix invalid signal values from device (rhbz 720093)
+
+* Tue Jul 12 2011 John W. Linville <linville@redhat.com>
+- rt2x00: Add device ID for RT539F device. (rhbz 720594)
+
+* Tue Jul 12 2011 Kyle McMartin <kmcmartin@redhat.com> 3.0-0.rc7.git0.1
+- Linux 3.0-rc7, hopefully the last before the Great Renumbering becomes
+ official.
+
+* Mon Jul 11 2011 Dave Jones <davej@redhat.com>
+- Change BINFMT_MISC to be modular. (rhbz 695415)
+
+* Sun Jul 10 2011 Kyle McMartin <kmcmartin@redhat.com> 3.0-0.rc6.git6.1
+- Linux 3.0-rc6-git6
+- iwlagn-fix-dma-direction.patch: drop.
+- Revert CONFIG_X86_RESERVE_LOW=640, it breaks booting on x86_64.
+
+* Thu Jul 07 2011 Dave Jones <davej@redhat.com>
+- Centralise CPU_FREQ options into config-generic.
+ Switch to using ondemand by default. (rhbz 713572)
+
+* Wed Jul 06 2011 Chuck Ebbert <cebbert@redhat.com>
+- Set CONFIG_X86_RESERVE_LOW=640 as requested by mjg
+
+* Mon Jul 04 2011 Kyle McMartin <kmcmartin@redhat.com> 3.0-0.rc6.git0.1
+- Linux 3.0-rc6
+- [generic] SCSI_ISCI=m, because why not
+
+* Sat Jul 02 2011 Kyle McMartin <kmcmartin@redhat.com> 3.0-0.rc5.git5.1
+- Linux 3.0-rc5-git5
+
+* Mon Jun 27 2011 Kyle McMartin <kmcmartin@redhat.com> 3.0-0.rc5.git0.1
+- Linux 3.0-rc5
+
+* Mon Jun 27 2011 Dave Jones <davej@redhat.com>
+- Disable CONFIG_CRYPTO_MANAGER_DISABLE_TESTS, as this also disables FIPS (rhbz 716942)
+
+* Thu Jun 23 2011 Kyle McMartin <kmcmartin@redhat.com> 3.0-0.rc4.git3.1
+- Linux 3.0-rc4-git3
+- Drop linux-3.0-fix-uts-release.patch, and instead just perl the Makefile
+- linux-2.6-silence-noise.patch: fix context
+- iwlagn-fix-dma-direction.patch: fix DMAR errors (for me at least)
+
+* Wed Jun 22 2011 Kyle McMartin <kmcmartin@redhat.com> 3.0-0.rc4.git0.2
+- Re-enable debuginfo generation. Thanks to Richard Jones for noticing... no
+ wonder builds had been so quick lately.
+
+* Tue Jun 21 2011 Kyle McMartin <kmcmartin@redhat.com> 3.0-0.rc4.git0.1
+- Linux 3.0-rc4 (getting closer...)
+
+* Fri Jun 17 2011 Kyle McMartin <kmcmartin@redhat.com> 3.0-0.rc3.git6.1
+- Update to 3.0-rc3-git6
+
+* Fri Jun 17 2011 Dave Jones <davej@redhat.com>
+- drop qcserial 'compile fix' that was just duplicating an include.
+- drop struct sizeof debug patch. (no real value. not upstreamable)
+- drop linux-2.6-debug-always-inline-kzalloc.patch.
+ Can't recall why this was added. Can easily re-add if deemed necessary.
+
+* Fri Jun 17 2011 Kyle McMartin <kmcmartin@redhat.com>
+- linux-2.6-defaults-pci_no_msi.patch: drop, haven't toggled the default
+ in many moons.
+- linux-2.6-defaults-pci_use_crs.patch: ditto.
+- linux-2.6-selinux-mprotect-checks.patch: upstream a while ago.
+- drm-i915-gen4-has-non-power-of-two-strides.patch: drop buggy bugfix
+- drop some more unapplied crud.
+- We haven't applied firewire patches in a dogs age.
+
+* Fri Jun 17 2011 Kyle McMartin <kmcmartin@redhat.com> 3.0-0.rc3.git5.1
+- Try updating to a git snapshot for the first time in 3.0-rc,
+ update to 3.0-rc3-git5
+- Fix a subtle bug I introduced in 3.0-rc1, "patch-3." is 9 letters, not 10.
+
+* Thu Jun 16 2011 Kyle McMartin <kmcmartin@redhat.com>
+- Disable mm patches which had been submitted against 2.6.39, as Rik reports
+ they seem to aggravate a VM_BUG_ON. More investigation is necessary.
+
+* Wed Jun 15 2011 Kyle McMartin <kmcmartin@redhat.com>
+- Conflict with pre-3.2.1-5 versions of mdadm. (#710646)
+
+* Wed Jun 15 2011 Kyle McMartin <kmcmartin@redhat.com>
+- Build in aesni-intel on i686 for symmetry with 64-bit.
+
+* Tue Jun 14 2011 Kyle McMartin <kmcmartin@redhat.com> 3.0-0.rc3.git0.3
+- Fix libdm conflict (whose bright idea was it to give subpackages differing
+ version numbers?)
+
+* Tue Jun 14 2011 Kyle McMartin <kmcmartin@redhat.com>
+- Update to 3.0-rc3, add another conflicts to deal with 2 digit
+ versions (libdm.)
+- Simplify linux-3.0-fix-uts-release.patch now that SUBLEVEL is optional.
+- revert-ftrace-remove-unnecessary-disabling-of-irqs.patch: drop upstreamed
+ patch.
+- drm-intel-eeebox-eb1007-quirk.patch: ditto.
+- ath5k-disable-fast-channel-switching-by-default.patch: ditto.
+
+* Thu Jun 09 2011 Kyle McMartin <kmcmartin@redhat.com>
+- ath5k-disable-fast-channel-switching-by-default.patch (rhbz#709122)
+ (korgbz#34992) [a99168ee in wireless-next]
+
+* Thu Jun 09 2011 Kyle McMartin <kmcmartin@redhat.com> 3.0-0.rc2.git0.2
+- rhbz#710921: revert-ftrace-remove-unnecessary-disabling-of-irqs.patch
+
+* Wed Jun 08 2011 Kyle McMartin <kmcmartin@redhat.com> 3.0-0.rc2.git0.1
+- Update to 3.0-rc2, rebase utsname fix.
+- Build IPv6 into the kernel for a variety of reasons
+ (http://lists.fedoraproject.org/pipermail/kernel/2011-June/003105.html)
+
+* Mon Jun 06 2011 Kyle McMartin <kmcmartin@redhat.com> 3.0-0.rc1.git0.3
+- Conflict with module-init-tools older than 3.13 to ensure the
+ 3.0 transition is handled correctly.
+
+* Wed Jun 01 2011 Kyle McMartin <kmcmartin@redhat.com> 3.0-0.rc1.git0.2
+- Fix utsname for 3.0-rc1
+
+* Mon May 30 2011 Kyle McMartin <kmcmartin@redhat.com> 3.0-0.rc1.git0.1
+- Linux 3.0-rc1 (won't build until module-init-tools gets an update.)
+
+* Mon May 30 2011 Kyle McMartin <kyle@redhat.com>
+- Trimmed changelog, see fedpkg git for earlier history.
+
+###
+# The following Emacs magic makes C-c C-e use UTC dates.
+# Local Variables:
+# rpm-change-log-uses-utc: t
+# End:
+###
git://git.onelab.eu / linux-3.git / commitdiff