# Mark Huang <mlhuang@cs.princeton.edu>
# Copyright (C) 2006 The Trustees of Princeton University
#
-# $Id: db-config,v 1.12 2006/12/12 16:33:45 thierry Exp $
+# $Id: db-config,v 1.21 2007/02/02 19:56:21 mlhuang Exp $
#
from plc_config import PLCConfiguration
'min_role_id': 10},
# Bandwidth limits
- {'name': "net_min",
- 'description': "Minimum bandwidth (bps)",
+ {'name': "net_min_rate",
+ 'description': "Minimum bandwidth (kbps)",
'min_role_id': 10},
- {'name': "net_max",
- 'description': "Maximum bandwidth (bps)",
+ {'name': "net_max_rate",
+ 'description': "Maximum bandwidth (kbps)",
'min_role_id': 10},
- {'name': "net_avg",
- 'description': "Average bandwidth (bps)",
+ {'name': "net_i2_min_rate",
+ 'description': "Minimum bandwidth over I2 routes (kbps)",
'min_role_id': 10},
- {'name': "net_share",
- 'description': "Number of bandwidth shares",
+ {'name': "net_i2_max_rate",
+ 'description': "Maximum bandwidth over I2 routes (kbps)",
'min_role_id': 10},
- {'name': "net2_min",
- 'description': "Minimum bandwidth over routes exempt from node bandwidth limits (bps)",
+ {'name': "net_max_kbyte",
+ 'description': "Maximum daily network Tx KByte limit.",
'min_role_id': 10},
- {'name': "net2_max",
- 'description': "Maximum bandwidth over routes exempt from node bandwidth limits (bps)",
+ {'name': "net_thresh_kbyte",
+ 'description': "KByte limit before warning and throttling.",
'min_role_id': 10},
- {'name': "net2_avg",
- 'description': "Average bandwidth over routes exempt from node bandwidth limits (bps)",
+ {'name': "net_i2_max_kbyte",
+ 'description': "Maximum daily network Tx KByte limit to I2 hosts.",
'min_role_id': 10},
- {'name': "net2_share",
- 'description': "Number of bandwidth shares over routes exempt from node bandwidth limits",
+ {'name': "net_i2_thresh_kbyte",
+ 'description': "KByte limit to I2 hosts before warning and throttling.",
'min_role_id': 10},
-
+ {'name': "net_share",
+ 'description': "Number of bandwidth shares",
+ 'min_role_id': 10},
+ {'name': "net_i2_share",
+ 'description': "Number of bandwidth shares over I2 routes",
+ 'min_role_id': 10},
+
# Disk quota
{'name': "disk_max",
'description': "Disk quota (1k disk blocks)",
else:
UpdateSliceAttributeType(default_attribute_type['name'], default_attribute_type)
- # Get contents of SSL public certificate used for signing slice tickets
- try:
- plc_ticket_pubkey = ""
- for line in file(plc_ma_sa['ca_ssl_key_pub']):
- # Skip comments
- if line[0:5] != "-----":
- # XXX The embedded newlines matter, do not strip()!
- plc_ticket_pubkey += line
- except:
- plc_ticket_pubkey = '%KEY%'
-
# Create/update system slices
legacy_slices = [
# XXX Required for old Node Manager
'expires': sys.maxint,
'attributes': [('plc_slice_type', "VServerSlice"),
('plc_agent_version', "1.0"),
- ('plc_ticket_pubkey', plc_ticket_pubkey)]},
+ ('plc_ticket_pubkey', "")]},
# XXX Required for old Node Manager
{'name': "pl_conf_vserverslice",
if (name, value) not in slice_attributes:
AddSliceAttribute(slice['name'], name, value)
- # Load default email templates
- email_templates = [
- {'message_id': 'JOIN_REQUEST_APPROVED',
- 'subject': "Your request to join PlanetLab has been approved",
- 'template': """
- Your request to join PlanetLab has been approved!
-
- At this point PI and tech contact accounts have been created
- and enabled. You will not be able to create slices until at
- least one node is up and running correctly. To use these
- accounts, you must first reset your password to obtain a
- new one. Once logged in, please change your password.
-
- Instructions for setting up your nodes can be found at:
- http://%s/consortium/setup_procedure.php
-
- Please direct any questions to PlanetLab Support, thank you!
-
- %s
- http://%s
- """
- },
- {'message_id': 'JOIN_REQUEST_APPROVED_PL',
- 'subject': "The join request for %s has been approved",
- 'template':"""
- The join request for %s has been approved.
-
- To view the details of this site, visit:
- https://%s/db/sites/detail.php?site_id=%d
- """
- },
- {'message_id': 'ACCOUNT_REGISTERED',
- 'subject': "New account registration from %s at %s",
- 'template': """
- %s has signed up for a new PlanetLab account at %s, but
- has not yet been enabled. The following roles have been
- requested:%s
-
- If this account includes a PI role, we require an email from
- the current PI at that site indicating this is acceptable.
- If this account includes Admin role, another PlanetLab administrator
- will have to enable the account. For User and Tech roles, any site PI
- can enable the account.
-
- If this account is registered at a site that does not have a PI,
- this email is also being sent to PlanetLab support for further
- followup.
-
- To view details and enable this account, visit:
- https://%s/db/accounts/detail.php?person_id=%s
-
- %s
- http://%s
- """
- },
- {'message_id': 'PASSWORD_RESET_INITIATE',
- 'subject': "PlanetLab password reset",
- 'template': """
- Someone initiated a password reset on your PlanetLab account. If this
- was you, you may continue with the reset, by visiting:
-
- https://%s/db/login/reset_passwd.php?key=%s&id=%s
-
- If this was not you, please contact PlanetLab support about this
- request. Please do not share the above link with anyone, as it can be
- used to gain access to your account. If responding to support, delete
- the link before sending. Thank you.
-
- %s
- http://%s
- """
- }
- ]
-
- for template in email_templates:
+ installfailed = """
+Once the node meets these requirements, please reinitiate the install
+by visiting:
+
+https://%(PLC_WWW_HOST)s:%(PLC_WWW_SSL_PORT)d/db/nodes/?id=%(node_id)d
+
+Click the Reinstall link, then reboot the node.
+
+If you have already performed this step and are still receiving this
+message, please reply so that we may investigate the problem.
+"""
+
+ # Load default message templates
+ message_templates = [
+ {'message_id': 'Verify account',
+ 'subject': "Verify account registration",
+ 'template': """
+Please verify that you registered for a %(PLC_NAME)s account with the
+username %(email)s by visiting:
+
+https://%(PLC_WWW_HOST)s:%(PLC_WWW_SSL_PORT)d/db/persons/register.php?id=%(person_id)d&key=%(verification_key)s
+
+If you did not register for a %(PLC_NAME)s account, please ignore this
+message, or contact %(PLC_NAME)s Support <%(PLC_MAIL_SUPPORT_ADDRESS)s>.
+"""
+ },
+
+ {'message_id': 'New PI account',
+ 'subject': "New PI account registration from %(first_name)s %(last_name)s <%(email)s> at %(site_name)s",
+ 'template': """
+%(first_name)s %(last_name)s <%(email)s> has signed up for a new
+%(PLC_NAME)s account at %(site_name)s and has requested a PI role. PIs
+are responsible for enabling user accounts, creating slices, and
+ensuring that all users abide by the %(PLC_NAME)s Acceptable Use
+Policy.
+
+Only %(PLC_NAME)s administrators may enable new PI accounts. If you
+are a PI at %(site_name)s, please respond and indicate whether this
+registration is acceptable.
+
+To view the request, visit:
+
+https://%(PLC_WWW_HOST)s:%(PLC_WWW_SSL_PORT)d/db/persons/index.php?id=%(person_id)d
+"""
+ },
+
+ {'message_id': 'New account',
+ 'subject': "New account registration from %(first_name)s %(last_name)s <%(email)s> at %(site_name)s",
+ 'template': """
+%(first_name)s %(last_name)s <%(email)s> has signed up for a new
+%(PLC_NAME)s account at %(site_name)s and has requested the following
+roles: %(roles)s.
+
+To deny the request or enable the account, visit:
+
+https://%(PLC_WWW_HOST)s:%(PLC_WWW_SSL_PORT)d/db/persons/index.php?id=%(person_id)d
+"""
+ },
+
+ {'message_id': 'Password reset requested',
+ 'subject': "Password reset requested",
+ 'template': """
+Someone has requested that the password of your %(PLC_NAME)s account
+%(email)s be reset. If this person was you, you may continue with the
+reset by visiting:
+
+https://%(PLC_WWW_HOST)s:%(PLC_WWW_SSL_PORT)d/db/persons/reset_password.php?id=%(person_id)d&key=%(verification_key)s
+
+If you did not request that your password be reset, please contact
+%(PLC_NAME)s Support <%(PLC_MAIL_SUPPORT_ADDRESS)s>. Do not quote or
+otherwise include any of this text in any correspondence.
+"""
+ },
+
+ {'message_id': 'Password reset',
+ 'subject': "Password reset",
+ 'template': """
+The password of your %(PLC_NAME)s account %(email)s has been
+temporarily reset to:
+
+%(password)s
+
+Please change it at as soon as possible by visiting:
+
+https://%(PLC_WWW_HOST)s:%(PLC_WWW_SSL_PORT)d/db/persons/index.php?id=%(person_id)d
+
+If you did not request that your password be reset, please contact
+%(PLC_NAME)s Support <%(PLC_MAIL_SUPPORT_ADDRESS)s>. Do not quote or
+otherwise include any of this text in any correspondence.
+"""
+ },
+
+ # Boot Manager messages
+ {'message_id': "installfinished",
+ 'subject': "%(hostname)s completed installation",
+ 'template': """
+%(hostname)s just completed installation.
+
+The node should be usable in a couple of minutes if installation was
+successful.
+"""
+ },
+
+ {'message_id': "insufficientdisk",
+ 'subject': "%(hostname)s does not have sufficient disk space",
+ 'template': """
+%(hostname)s failed to boot because it does not have sufficent disk
+space, or because its disk controller was not recognized.
+
+Please replace the current disk or disk controller or install
+additional disks to meet the current hardware requirements.
+""" + installfailed
+ },
+
+ {'message_id': "insufficientmemory",
+ 'subject': "%(hostname)s does not have sufficient memory",
+ 'template': """
+%(hostname)s failed to boot because it does not have sufficent
+memory.
+
+Please install additional memory to meet the current hardware
+requirements.
+""" + installfailed
+ },
+
+ {'message_id': "authfail",
+ 'subject': "%(hostname)s failed to authenticate",
+ 'template':
+"""
+%(hostname)s failed to authenticate for the following reason:
+
+%(fault)s
+
+The most common reason for authentication failure is that the
+authentication key stored in the node configuration file, does not
+match the key on record. Regenerate the node configuration file by
+visiting:
+
+https://%(PLC_WWW_HOST)s:%(PLC_WWW_SSL_PORT)d/db/nodes/?id=%(node_id)d
+
+Click the Configuration File link, and save the downloaded file as
+plnode.txt on either a floppy disk or a USB flash drive. Click the
+Boot link, then reboot the node.
+
+If you have already performed this step and are still receiving this
+message, please reply so that we may investigate the problem.
+"""
+ },
+
+ {'message_id': "notinstalled",
+ 'subject': "%(hostname)s is not installed",
+ 'template':
+"""
+%(hostname)s failed to boot because it has either never been
+installed, or the installation is corrupt.
+
+Please check if the hard drive has failed, and replace it if so. After
+doing so, visit:
+
+https://%(PLC_WWW_HOST)s:%(PLC_WWW_SSL_PORT)d/db/nodes/?id=%(node_id)d
+
+Click the Reinstall link, then reboot the node.
+
+If you have already performed this step and are still receiving this
+message, please reply so that we may investigate the problem.
+"""
+ },
+
+ {'message_id': "hostnamenotresolve",
+ 'subject': "%(hostname)s does not resolve",
+ 'template':
+"""
+%(hostname)s failed to boot because its hostname does not resolve, or
+does resolve but does not match its configured IP address.
+
+Please check the network settings for the node, especially its
+hostname, IP address, and DNS servers, by visiting:
+
+https://%(PLC_WWW_HOST)s:%(PLC_WWW_SSL_PORT)d/db/nodes/?id=%(node_id)d
+
+Correct any errors, click the Reinstall link, then reboot the node.
+
+If you have already performed this step and are still receiving this
+message, please reply so that we may investigate the problem.
+"""
+ },
+
+ # XXX N.B. I don't think these are necessary, since there's no
+ # way that the Boot Manager would even be able to contact the
+ # API to send these messages.
+
+ {'message_id': "noconfig",
+ 'subject': "%(hostname)s does not have a configuration file",
+ 'template': """
+%(hostname)s failed to boot because it could not find a PlanetLab
+configuration file. To create this file, visit:
+
+https://%(PLC_WWW_HOST)s:%(PLC_WWW_SSL_PORT)d/db/nodes/?id=%(node_id)d
+
+Click the Configuration File link, and save the downloaded file as
+plnode.txt on either a floppy disk or a USB flash drive. Click the
+Reinstall link, then reboot the node.
+
+If you have already performed this step and are still receiving this
+message, please reply so that we may investigate the problem.
+"""
+ },
+
+ {'message_id': "nodetectednetwork",
+ 'subject': "%(hostname)s has unsupported network hardware",
+ 'template':
+"""
+
+%(hostname)s failed to boot because it has network hardware that is
+unsupported by the current production kernel. If it has booted
+successfully in the past, please try re-installing it by visiting:
+
+https://%(PLC_WWW_HOST)s:%(PLC_WWW_SSL_PORT)d/db/nodes/?id=%(node_id)d
+
+Click the Reinstall link, then reboot the node.
+
+If you have already performed this step and are still receiving this
+message, please reply so that we may investigate the problem.
+"""
+ },
+ ]
+
+ for template in message_templates:
messages = GetMessages([template['message_id']])
if not messages:
- AddMessage(template)
-
+ AddMessage(template)
if __name__ == '__main__':
main()
git://git.onelab.eu / myplc.git / blobdiff