[sliver-openvswitch.git] / debian / changelog

openvswitch (2.1.90-1) unstable; urgency=low
   [ Open vSwitch team ]
   * New upstream version
    - Nothing yet!  Try NEWS...

 -- Open vSwitch team <dev@openvswitch.org>  Mon, 23 Dec 2013 18:07:18 -0700

openvswitch (2.1.0-1) unstable; urgency=low
   [ Open vSwitch team ]
   * New upstream version
   - Address prefix tracking support for flow tables.  New columns
     "prefixes" in OVS-DB table "Flow_Table" controls which packet
     header fields are used for address prefix tracking.  Prefix
     tracking allows the classifier to skip rules with longer than
     necessary prefixes, resulting in better wildcarding for datapath
     flows.  Default configuration is to not use any fields for prefix
     tracking.  However, if any flow tables contain both exact matches
     and masked matches for IP address fields, OVS performance may be
     increased by using this feature.
     * As of now, the fields for which prefix lookup can be enabled
       are: 'tun_id', 'tun_src', 'tun_dst', 'nw_src', 'nw_dst' (or
       aliases 'ip_src' and 'ip_dst'), 'ipv6_src', and 'ipv6_dst'.
       (Using this feature for 'tun_id' would only make sense if the
       tunnel IDs have prefix structure similar to IP addresses.)
     * There is a maximum number of fields that can be enabled for any
       one flow table.  Currently this limit is 3.
     * Examples:
       $ ovs-vsctl set Bridge br0 flow_tables:0=@N1 -- \
         --id=@N1 create Flow_Table name=table0
       $ ovs-vsctl set Bridge br0 flow_tables:1=@N1 -- \
         --id=@N1 create Flow_Table name=table1
       $ ovs-vsctl set Flow_Table table0 prefixes=ip_dst,ip_src
       $ ovs-vsctl set Flow_Table table1 prefixes=[]
   - TCP flags matching: OVS now supports matching of TCP flags.  This
     has an adverse performance impact when using OVS userspace 1.10
     or older (no megaflows support) together with the new OVS kernel
     module.  It is recommended that the kernel and userspace modules
     both are upgraded at the same time.
   - The default OpenFlow and OVSDB ports will change to
     IANA-assigned numbers in a future release.  Consider updating
     your installations to specify port numbers instead of using the
     defaults.
   - OpenFlow:
     * The OpenFlow 1.1+ "Write-Actions" instruction is now supported.
     * OVS limits the OpenFlow port numbers it assigns to port 32767 and
       below, leaving port numbers above that range free for assignment
       by the controller.
     * ovs-vswitchd now honors changes to the "ofport_request" column
       in the Interface table by changing the port's OpenFlow port
       number.
   - ovs-vswitchd.conf.db.5 man page will contain graphviz/dot
     diagram only if graphviz package was installed at the build time.
   - Support for Linux kernels up to 3.11
   - ovs-dpctl:
     The "show" command also displays mega flow mask stats.
   - ovs-ofctl:
     * New command "ofp-parse-pcap" to dump OpenFlow from PCAP files.
   - ovs-controller has been renamed test-controller.  It is no longer
     packaged or installed by default, because too many users assumed
     incorrectly that ovs-controller was a necessary or desirable part
     of an Open vSwitch deployment.
   - Added vlog option to export to a UDP syslog sink.
   - ovsdb-client:
     * The "monitor" command can now monitor all tables in a database,
       instead of being limited to a single table.
   - The flow-eviction-threshold has been replaced by the flow-limit which is a
     hard limit on the number of flows in the datapath.  It defaults to 200,000
     flows.  OVS automatically adjusts this number depending on network
     conditions.
   * The openvswitch-controller package has been removed, because too many
     users assumed incorrectly that ovs-controller was a necessary or
     desirable part of an Open vSwitch deployment.

 -- Open vSwitch team <dev@openvswitch.org>  Mon, 23 Dec 2013 18:07:18 -0700

openvswitch (2.0.0-1) unstable; urgency=low
   [ Open vSwitch team ]
   * New upstream version
    - The ovs-vswitchd process is no longer single-threaded.  Multiple
      threads are now used to handle flow set up and asynchronous
      logging.
    - OpenFlow:
      * Experimental support for OpenFlow 1.1 (in addition to 1.2 and
        1.3, which had experimental support in 1.10).
      * New support for matching outer source and destination IP address
        of tunneled packets, for tunnel ports configured with the newly
        added "remote_ip=flow" and "local_ip=flow" options.
      * Support for matching on metadata 'pkt_mark' for interacting with
        other system components. On Linux this corresponds to the skb
        mark.
      * Support matching, rewriting SCTP ports
    - The Interface table in the database has a new "ifindex" column to
      report the interface's OS-assigned ifindex.
    - New "check-oftest" Makefile target for running OFTest against Open
      vSwitch.  See README-OFTest for details.
    - The flow eviction threshold has been moved to the Open_vSwitch table.
    - Database names are now mandatory when specifying ovsdb-server options
      through database paths (e.g. Private key option with the database name
      should look like "--private-key=db:Open_vSwitch,SSL,private_key").
    - Added ovs-dev.py, a utility script helpful for Open vSwitch developers.
    - Support for Linux kernels up to 3.10
    - ovs-ofctl:
      * New "ofp-parse" for printing OpenFlow messages read from a file.
    - Added configurable flow caching support to IPFIX exporter.
    - Dropped support for Linux pre-2.6.32.
    - Log file timestamps and ovsdb commit timestamps are now reported
      with millisecond resolution.  (Previous versions only reported
      whole seconds.)

 -- Open vSwitch team <dev@openvswitch.org>  Tue, 15 Oct 2013 15:03:42 -0700

openvswitch (1.11.0-1) unstable; urgency=low
   [ Open vSwitch team ]
   * New upstream version
    - Support for megaflows, which allows wildcarding in the kernel (and
      any dpif implementation that supports wildcards).  Depending on
      the flow table and switch configuration, flow set up rates are
      close to the Linux bridge.
    - The "tutorial" directory contains a new tutorial for some advanced
      Open vSwitch features.
    - Stable bond mode has been removed.
    - The autopath action has been removed.
    - New support for the data encapsulation format of the LISP tunnel
      protocol (RFC 6830).  An external control plane or manual flow
      setup is required for EID-to-RLOC mapping.
    - OpenFlow:
      * The "dec_mpls_ttl" and "set_mpls_ttl" actions from OpenFlow
        1.1 and later are now implemented.
      * New "stack" extension for use in actions, to push and pop from
        NXM fields.
      * The "load" and "set_field" actions can now modify the "in_port".  (This
        allows one to enable output to a flow's input port by setting the
        in_port to some unused value, such as OFPP_NONE.)
    - ovs-dpctl:
      * New debugging commands "add-flow", "mod-flow", "del-flow".
    - In dpif-based bridges, cache action translations, which can improve
      flow set up performance by 80% with a complicated flow table.
    - New syslog format, prefixed with "ovs|", to be easier to filter.
    - RHEL: Removes the default firewall rule that allowed GRE traffic to
      pass through. Any users that relied on this automatic firewall hole
      will have to manually configure it. The ovs-ctl(8) manpage documents
      the "enable-protocol" command that can be used as an alternative.
    - New CFM demand mode which uses data traffic to indicate interface
      liveness.

 -- Open vSwitch team <dev@openvswitch.org>  Wed, 28 Aug 2013 14:31:44 -0700

openvswitch (1.10.0-1) unstable; urgency=low
   [ Open vSwitch team ]
   * New upstream version
    - Bridge compatibility support has been removed.  Any uses that
      rely on ovs-brcompatd will have to stick with Open vSwitch 1.9.x
      or adapt to native Open vSwitch support (e.g. use ovs-vsctl instead
      of brctl).
    - The maximum size of the MAC learning table is now configurable.
    - With the Linux datapath, packets for new flows are now queued
      separately on a per-port basis, so it should no longer be
      possible for a large number of new flows arriving on one port to
      prevent new flows from being processed on other ports.
    - Many "ovs-vsctl" database commands now accept an --if-exists option.
      Please refer to the ovs-vsctl manpage for details.
    - OpenFlow:
      - Experimental support for newer versions of OpenFlow.  See
        the "What versions of OpenFlow does Open vSwitch support?"
        question in the FAQ for more details.
      - The OpenFlow "dp_desc" may now be configured by setting the
        value of other-config:dp-desc in the Bridge table.
      - It is possible to request the OpenFlow port number with the
        "ofport_request" column in the Interface table.
    - Tunneling:
      - New support for the VXLAN tunnel protocol (see the IETF draft here:
        http://tools.ietf.org/html/draft-mahalingam-dutt-dcops-vxlan-03).
      - Tunneling requires the version of the kernel module paired with
        Open vSwitch 1.9.0 or later.
      - Inheritance of the Don't Fragment bit in IP tunnels (df_inherit)
        is no longer supported.
      - Path MTU discovery is no longer supported.
    - ovs-dpctl:
      - The "dump-flows" and "del-flows" no longer require an argument
        if only one datapath exists.
    - ovs-appctl:
      - New "vlog/disable-rate-limit" and "vlog/enable-rate-limit"
        commands available allow control over logging rate limits.
      - New "dpif/dump-dps", "dpif/show", and "dpif/dump-flows" command
        that mimic the equivalent ovs-dpctl commands.
    - The ofproto library is now responsible for assigning OpenFlow port
      numbers.  An ofproto implementation should assign them when
      port_construct() is called.
    - All dpif-based bridges of a particular type share a common
      datapath called "ovs-<type>", e.g. "ovs-system".  The ovs-dpctl
      commands will now return information on that shared datapath.  To
      get the equivalent bridge-specific information, use the new
      "ovs-appctl dpif/*" commands.
    - Backward-incompatible changes:
      - Earlier Open vSwitch versions treated ANY as a wildcard in flow
        syntax.  OpenFlow 1.1 adds a port named ANY, which introduces a
        conflict.  ANY was rarely used in flow syntax, so we chose to
        retire that meaning of ANY in favor of the OpenFlow 1.1 meaning.
    - Patch ports no longer require kernel support, so they now work
      with FreeBSD and the kernel module built into Linux 3.3 and later.

 -- Open vSwitch team <dev@openvswitch.org>  Wed, 01 May 2013 14:28:21 -0700

openvswitch (1.9.0-1) unstable; urgency=low
   [ Open vSwitch team ]
   * New upstream version
    - Datapath:
      - Support for ipv6 set action.
      - SKB mark matching and setting.
      - support for Linux kernels up to 3.8
    - FreeBSD is now a supported platform, thanks to code contributions from
      Gaetano Catalli, Ed Maste, and Giuseppe Lettieri.
    - ovs-bugtool: New --ovs option to report only OVS related information.
    - New %t and %T log escapes to identify the subprogram within a
      cooperating group of processes or threads that emitted a log message.
      The default log patterns now include this information.
    - OpenFlow:
      - Allow bitwise masking for SHA and THA fields in ARP, SLL and TLL
        fields in IPv6 neighbor discovery messages, and IPv6 flow label.
      - Adds support for writing to the metadata field for a flow.
    - Tunneling:
      - The tunneling code no longer assumes input and output keys are
        symmetric.  If they are not, PMTUD needs to be disabled for
        tunneling to work. Note this only applies to flow-based keys.
      - New support for a nonstandard form of GRE that supports a 64-bit key.
      - Tunnel Path MTU Discovery default value was set to 'disabled'.
        This feature is deprecated and will be removed soon.
      - Tunnel header caching removed.
    - ovs-ofctl:
      - Commands and actions that accept port numbers now also accept keywords
        that represent those ports (such as LOCAL, NONE, and ALL).  This is
        also the recommended way to specify these ports, for compatibility
        with OpenFlow 1.1 and later (which use the OpenFlow 1.0 numbers
        for these ports for different purposes).
    - ovs-dpctl:
      - Support requesting the port number with the "port_no" option in
        the "add-if" command.
    - ovs-pki: The "online PKI" features have been removed, along with
      the ovs-pki-cgi program that facilitated it, because of some
      alarmist insecurity claims.  We do not believe that these claims
      are true, but because we do not know of any users for this
      feature it seems better on balance to remove it.  (The ovs-pki-cgi
      program was not included in distribution packaging.)
    - ovsdb-server now enforces the immutability of immutable columns.  This
      was not enforced in earlier versions due to an oversight.
    - The following features are now deprecated.  They will be removed no
      earlier than February 2013.  Please email dev@openvswitch.org with
      concerns.
        - Bridge compatibility.
        - Stable bond mode.
        - The autopath action.
        - Interface type "null".
        - Numeric values for reserved ports (see "ovs-ofctl" note above).
        - Tunnel Path MTU Discovery.
        - CAPWAP tunnel support.
    - The data in the RARP packets can now be matched in the same way as the
      data in ARP packets.

 -- Open vSwitch team <dev@openvswitch.org>  Tue, 26 Feb 2013 11:23:19 -0700

openvswitch (1.8.0-1) unstable; urgency=low
   [ Open vSwitch team ]
   * New upstream version
    *** Internal only release ***
    - New FAQ.  Please send updates and additions!
    - Authors of controllers, please read the new section titled "Action
      Reproduction" in DESIGN, which describes an Open vSwitch change in
      behavior in corner cases that may affect some controllers.
    - ovs-l3ping:
        - A new test utility that can create L3 tunnel between two Open
          vSwitches and detect connectivity issues.
    - ovs-ofctl:
        - New --sort and --rsort options for "dump-flows" command.
        - "mod-port" command can now control all OpenFlow config flags.
    - OpenFlow:
      - Allow general bitwise masking for IPv4 and IPv6 addresses in
        IPv4, IPv6, and ARP packets.  (Previously, only CIDR masks
        were allowed.)
      - Allow support for arbitrary Ethernet masks.  (Previously, only
        the multicast bit in the destination address could be individually
        masked.)
      - New field OXM_OF_METADATA, to align with OpenFlow 1.1.
      - The OFPST_QUEUE request now reports an error if a specified port or
        queue does not exist, or for requests for a specific queue on all
        ports, if the specified queue does not exist on any port.  (Previous
        versions generally reported an empty set of results.)
      - New "flow monitor" feature to allow controllers to be notified of
        flow table changes as they happen.
    - Additional protocols are not mirrored and dropped when forward-bpdu is
      false.  For a full list, see the ovs-vswitchd.conf.db man page.
    - Open vSwitch now sends RARP packets in situations where it previously
      sent a custom protocol, making it consistent with behavior of QEMU and
      VMware.
    - All Open vSwitch programs and log files now show timestamps in UTC,
      instead the local timezone, by default.

 -- Open vSwitch team <dev@openvswitch.org>  Mon, 16 Jul 2012 16:44:52 +0900

openvswitch (1.7.0-1) unstable; urgency=low
  [ Open vSwitch team ]
  * New upstream version
    - kernel modules are renamed. openvswitch_mod.ko is now
      openvswitch.ko and brcompat_mod.ko is now brcompat.ko.
    - Increased the number of NXM registers to 8.
    - Added ability to configure dscp setting for manager and controller
      connections.  By default, these connections have a DSCP value of
      Internetwork Control (0xc0).
    - Added the granular link health statistics, 'cfm_health', to an
      interface.
    - OpenFlow:
        - Added support to mask nd_target for ICMPv6 neighbor discovery flows.
        - Added support for OpenFlow 1.3 port description (OFPMP_PORT_DESC)
          multipart messages.
    - ovs-ofctl:
        - Added the "dump-ports-desc" command to retrieve port
          information using the new port description multipart messages.
    - ovs-test:
        - Added support for spawning ovs-test server from the client.
        - Now ovs-test is able to automatically create test bridges and ports.
    - "ovs-dpctl dump-flows" now prints observed TCP flags in TCP flows.
    - Tripled flow setup performance.
    - The "coverage/log" command previously available through ovs-appctl
      has been replaced by "coverage/show".  The new command replies with
      coverage counter values, instead of logging them.

 -- Open vSwitch team <dev@openvswitch.org>  Mon, 30 Jul 2012 17:23:57 +0900

openvswitch (1.6.1-1) unstable; urgency=low
  [ Open vSwitch team ]
  * New upstream version
    - Allow OFPP_CONTROLLER as the in_port for packet-out messages.

 -- Open vSwitch team <dev@openvswitch.org>  Mon, 25 Jun 2012 13:52:17 +0900

openvswitch (1.6.0-1) unstable; urgency=low
  [ Open vSwitch team ]
  * New upstream version
    - bonding
        - LACP bonds no longer fall back to balance-slb when negotiations fail.
          Instead they drop traffic.
        - The default bond_mode changed from SLB to active-backup, to protect
          unsuspecting users from the significant risks of SLB bonds (which are
          documented in vswitchd/INTERNALS).
        - Load balancing can be disabled by setting the bond-rebalance-interval
          to zero.
    - OpenFlow:
        - Added support for bitwise matching on TCP and UDP ports.
          See ovs-ofctl(8) for more information.
        - NXM flow dumps now include times elapsed toward idle and hard
          timeouts.
        - Added an OpenFlow extension NXT_SET_ASYNC_CONFIG that allows
          controllers more precise control over which OpenFlow messages they
          receive asynchronously.
        - New "fin_timeout" action.
        - Added "fin_timeout" support to "learn" action.
    - The default MAC learning timeout has been increased from 60 seconds
      to 300 seconds.  The MAC learning timeout is now configurable.
    - When QoS settings for an interface do not configure a default queue
      (queue 0), Open vSwitch now uses a default configuration for that
      queue, instead of dropping all packets as in previous versions.
    - Logging to console and file will have UTC timestamp as a default for all
      the daemons. An example of the default format is 2012-01-27T16:35:17Z.
      ovs-appctl can be used to change the default format as before.
    - New support for limiting the number of flows in an OpenFlow flow
      table, with configurable policy for evicting flows upon
      overflow.  See the Flow_Table table in ovs-vswitch.conf.db(5)
      for more information.
    - New "enable-async-messages" column in the Controller table.  If set to
      false, OpenFlow connections to the controller will initially have all
      asynchronous messages disabled, overriding normal OpenFlow behavior.
    - ofproto-provider interface:
        - "struct rule" has a new member "used" that ofproto implementations
          should maintain by updating with ofproto_rule_update_used().
    - ovsdb-client:
        - The new option --timestamp causes the "monitor" command to print
          a timestamp with every update.
    - CFM module CCM broadcasts can now be tagged with an 802.1p priority.

 -- Open vSwitch team <dev@openvswitch.org>  Fri, 24 Feb 2012 11:12:48 +0900

openvswitch (1.5.0-1) unstable; urgency=low
  [ Open vSwitch team ]
  * New upstream version
    - OpenFlow:
        - Added support for querying, modifying, and deleting flows
          based on flow cookie when using NXM.
        - Added new NXM_PACKET_IN format.
    - ovs-ofctl:
        - Added daemonization support to the monitor and snoop commands.
    - ovs-vsctl:
        - The "find" command supports new set relational operators
          {=}, {!=}, {<}, {>}, {<=}, and {>=}.
    - ovsdb-tool now uses the typical database and schema installation
      directories as defaults.

 -- Open vSwitch team <dev@openvswitch.org>  Fri, 01 June 2012 13:06:00 +0900

openvswitch (1.4.0+git20120426-1) unstable; urgency=low

  * New upstream release fixing the following bugs:
    o Broken log rotation.
    o Use-after-free error when ports disappear.
    o Minor memory leaks.
    o Testsuite failures on big-endian architectures.

 -- Ben Pfaff <pfaffben@debian.org>  Thu, 26 Apr 2012 13:46:55 -0700

openvswitch (1.4.0+git20120321-1) unstable; urgency=low

  * New upstream version including:
    o Features:
      - ovs-vsctl: Allow "fake bridges" to be created for VLAN 0.
      - vswitchd: Make the MAC entry aging time configurable.
      - mac-learning: Increase MAC learning timeout to 300 seconds.
    o Bug fixes:
      - netdev-linux: Fix use-after-free when netdev_dump_queues() deletes
        queues.
      - netlink-socket: Increase Netlink socket receive buffer size.
      - ofproto: Fix code that keeps track of MTU.
      - ovs-monitor-ipsec: Detect correctly IPSEC configuration changes
      - bond: Incorrectly reported an error in appctl.
      - socket-util: Unlink Unix domain sockets that bind but fail to connect.
      - bridge: Remove unwanted ports at time of ofproto creation.
      - dpif-linux: Make dpif_linux_port_query_by_name() query only one
        datapath.
      - ofproto-dpif: Cleanup STP on ports when disabled on their bridge.
      - configure: Try to extract kernel source directory from build Makefile.
      - vswitchd: Always configure a default queue for QoS.
      - ofproto-dpif: Don't output to in_port even if in_port is OFPP_LOCAL.
      - sflow_agent: Use snprintf() in place of sprintf().
    o Packaging:
      - Move PKI directory to FHS-compliant location.  Closes: #661090.
        Thanks to Andreas Beckmann <debian@abeckmann.de> for reporting
        this bug.
      - Use a different way to avoid failing install without kernel module.
      - Avoid unit test failure when doing "unofficial" builds.
      - Bump standards-version to 3.9.3.
      - Remove some useless files from the dkms package.
      - Clean .pyc files in "clean" target.
      - Remove po-debconf build dependency.
      - Build-depend on python-all to pull in all Python versions.
      - Add missing ${python:Depends} to openvswitch-test package.
      - Improve long descriptions so as to better describe the packages.
      - Bump debhelper compat level to 8 and make build-depends consistent.
      - Fix exit status of openvswitch-switch init script "status" command.
      - Use provided kernel source dir instead of host kernel version.
      - Do not run "make" if "configure" fails during DKMS build.
      - Look in /lib/modules instead of /usr/src for DKMS kernel sources.
      - Fix dependencies for openvswitch-datapath-dkms package.
      - Don't install Python modules for obsolete Python versions.
      - Add dependency on ${misc:Depends} to openvswitch-test
    o Documentation improvements:
      - ovsdb-doc: Use minus sign in negative numbers in nroff output.
      - ovsdb-doc: Convert '-' preceding a number as a minus sign, not a
        hyphen.
      - ovsdb-doc: Put NAME section into generated manpage.
      - Fix typo in manpage.
      - vswitchd: Document behavior of 802.1p priorities with VLAN splinters.
      - netdev: Fix typo in error message.
      - INSTALL.Linux: minor typo

  * Many thanks to Thomas Goirand <zigo@debian.org> for contributing many
    of the packaging fixes listed above.

  * This version fixes most of the lintian errors described in bug
    #663051, but a few remain, so this upload does not close that bug.  I
    believe that this upload should be suitable for downgrading that bug's
    severity.

 -- Ben Pfaff <pfaffben@debian.org>  Wed, 21 Mar 2012 10:00:28 -0700

openvswitch (1.4.0-2+nmu1) unstable; urgency=low

  * Non maintainer upload.
  * Removes all patches in debian/patches, because they are patching stuff
  inconditionally in debian/*, and this should be applied by default.
  * Uses the correct ${kernel_source_dir} in debian/dkms.conf.in, so that
  the kernel module builds as expected (Closes: #659685).

 -- Thomas Goirand <zigo@debian.org>  Thu, 08 Mar 2012 08:46:24 +0000

openvswitch (1.4.0-2) unstable; urgency=low

  * Use explicit DKMS variable for kernel source directory
    - 0001-debian-Fix-dependencies-for-openvswitch-datapath-dkm.patch
    - 0002-debian-Look-in-lib-modules-instead-of-usr-src-for-DK.patch
    - 0001-debian-Use-provided-kernel-source-dir.patch
    - 0001-debian-Do-not-run-make-if-configure-fails-during-DKM.patch
    - (closes: #659685)
  * Don't install Python modules for obsolete Python versions
    - 0001-debian-Don-t-install-Python-modules-for-obsolete-Pyt.patch

 -- Simon Horman <horms@debian.org>  Tue, 14 Feb 2012 11:43:13 +0900

openvswitch (1.4.0-1) unstable; urgency=low
  [ Open vSwitch team ]
  * New upstream version
    - Compatible with Open vSwitch kernel module included in Linux 3.3.
    - New "VLAN splinters" feature to work around buggy device drivers
      in old Linux versions.  (This feature is deprecated.  When
      broken device drivers are no longer in widespread use, we will
      delete this feature.)  See ovs-vswitchd.conf.db(5) for more
      information.
    - OpenFlow:
       - Added ability to match on IPv6 flow label through NXM.
       - Added ability to match on ECN bits in IPv4 and IPv6 through NXM.
       - Added ability to match on TTL in IPv4 and IPv6 through NXM.
       - Added ability to modify ECN bits in IPv4.
       - Added ability to modify TTL in IPv4.
    - ovs-vswitchd:
       - Don't require the "normal" action to use mirrors.  Traffic will
         now be properly mirrored for any flows, regardless of their
         actions.
       - Track packet and byte statistics sent on mirrors.
    - ovs-appctl:
      - New "fdb/flush" command to flush bridge's MAC learning table.
    - ovs-test:
      - A new distributed testing tool that allows one to diagnose performance
        and connectivity issues. This tool currently is not included in RH or
        Xen packages.
    - RHEL packaging now supports integration with Red Hat network scripts.
    - Debian: Depend on python (>= 2.7) | python-argparse instead of
              python-argparse to avoid pulling in python2.6
              (closes: #653645)

 -- Open vSwitch team <dev@openvswitch.org>  Mon, 30 Jan 2012 23:36:00 +0000

openvswitch (1.3.0-1) unstable; urgency=low
  [ Open vSwitch team ]
  * New upstream version
    - OpenFlow:
      - Added an OpenFlow extension which allows the "output" action to accept
        NXM fields.
      - Added an OpenFlow extension for flexible learning.
      - Bumped number of NXM registers from four to five.
    - ovs-appctl:
      - New "version" command to determine version of running daemon.
      - If no argument is provided for "cfm/show", displays detailed
        information about all interfaces with CFM enabled.
      - If no argument is provided for "lacp/show", displays detailed
        information about all ports with LACP enabled.
    - ovs-vswitchd:
      - The software switch now supports 255 OpenFlow tables, instead
        of just one.  By default, only table 0 is consulted, but the
        new NXAST_RESUBMIT_TABLE action can look up in additional
        tables.  Tables 128 and above are reserved for use by the
        switch itself; please use only tables 0 through 127.
      - Add support for 802.1D spanning tree (STP).
    - Fragment handling extensions:
      - New OFPC_FRAG_NX_MATCH fragment handling mode, in which L4
        fields are made available for matching in fragments with
        offset 0.
      - New NXM_NX_IP_FRAG match field for matching IP fragments (usable
        via "ip_frag" in ovs-ofctl).
      - New ovs-ofctl "get-frags" and "set-frags" commands to get and set
        fragment handling policy.
    - CAPWAP tunneling now supports an extension to transport a 64-key.  By
      default it remains compatible with the old version and other
      standards-based implementations.
    - Flow setups are now processed in a round-robin manner across ports
      to prevent any single client from monopolizing the CPU and conducting
      a denial of service attack.
    - Added support for native VLAN tagging.  A new "vlan_mode"
      parameter can be set for "port". Possible values: "access",
      "trunk", "native-tagged" and "native-untagged".
    - test-openflowd has been removed.  Please use ovs-vswitchd instead.

 -- Open vSwitch team <dev@openvswitch.org>  Mon, 09 Dec 2011 23:36:00 +0000

openvswitch (1.2.0-1) unstable; urgency=low

  [ Open vSwitch team ]
  * New upstream version
    - New "ofproto" abstraction layer to ease porting to hardware
      switching ASICs.
    - Packaging for Red Hat Enterprise Linux 5.6 and 6.0.
    - Datapath support for Linux kernels up to 3.0.
    - OpenFlow:
      - New "bundle" and "bundle_load" action extensions.
    - Database:
      - Implement table unique constraints.
      - Support cooperative locking between callers.
    - ovs-dpctl:
      - New "-s" option for "show" command prints packet and byte
        counters for each port.
    - ovs-ofctl:
      - New "--readd" option for "replace-flows".
    - ovs-vsctl:
      - New "show" command to print an overview of configuration.
      - New "comment" command to add remark that explains intentions.
    - ovs-brcompatd has been rewritten to fix long-standing bugs.
    - ovs-openflowd has been renamed test-openflowd and moved into the
      tests directory.  Its presence confused too many users.  Please
      use ovs-vswitchd instead.
    - New ovs-benchmark utility to test flow setup performance.
    - A new log level "off" has been added.  Configuring a log facility
      "off" prevents any messages from being logged to it.  Previously,
      "emer" was effectively "off" because no messages were ever logged at
      level "emer".  Now, errors that cause a process to exit are logged
      at "emer" level.
    - "configure" option --with-l26 has been renamed --with-linux, and
      --with-l26-source has been renamed --with-linux-source.  The old
      names will be removed after the next release, so please update
      your scripts.
    - The "-2.6" suffix has been dropped from the datapath/linux-2.6 and
      datapath/linux-2.6/compat-2.6 directories.
    - Feature removals:
      - Dropped support for "tun_id_from_cookie" OpenFlow extension.
        Please use the extensible match extensions instead.
      - Removed the Maintenance_Point and Monitor tables in an effort
        to simplify 802.1ag configuration.
    - Performance and scalability improvements
    - Bug fixes

 -- Open vSwitch team <dev@openvswitch.org>  Wed, 03 Aug 2011 14:43:00 +0000

openvswitch (1.1.1-1) unstable; urgency=low

  [ Open vSwitch team ]
  * Bug fixes.

  [ Simon Horman ]
  * docs: Suppress warning marcro DD not defined
    (upstream commit 58f870d0)
  * debian: Make openvswitch depend on Python
    (upstream commit aa41cb61)
  * debian: Don't begin openvswitch-pki description with article.
    (upstream commit bc6bb66)
  * Debian: Add ${misc:Depends} dependency to python-openvswitch
  * Debian: Update standards version from 3.9.1 to 3.9.2
  * Debian: ${source:Version} dependency on python openvswitch
  * Debian: ${source:Version} dependency for python openvswitch
  * Switch to dpkg-source 3.0 (quilt) format
    - For local non-debian/ patches (above)

 -- Simon Horman <horms@debian.org>  Wed, 15 Jun 2011 10:46:15 +0900
    
openvswitch (1.1.0-1) unstable; urgency=low

  [ Open vSwitch team ]
  * New upstream version
    - Ability to define policies over IPv6
    - LACP
    - 802.1ag CCM
    - Support for extensible match extensions to OpenFlow
    - QoS:
      - Support for HFSC qdisc.
      - Queue used by in-band control can now be configured.
    - Kernel:
      - Kernel<->userspace interface has been reworked and should be
        close to a stable ABI now.
      - "Port group" concept has been dropped.
    - GRE over IPSEC tunnels
    - Bonding:
      - New active backup bonding mode.
      - New L4 hashing support when LACP is enabled.
      - Source MAC hash now includes VLAN field also.
      - miimon support.
    - Greatly improved handling of large flow tables
    - ovs-dpctl:
      - "show" command now prints full vport configuration.
      - "dump-groups" command removed since kernel support for
        port groups was dropped.
    - ovs-vsctl:
      - New commands for working with the new Managers table.
      - "list" command enhanced with new formatting options and --columns
        option.
      - "get" command now accepts new --id option.
      - New "find" command.
    - ovs-ofctl:
      - New "queue-stats" command for printing queue stats.
      - New commands "replace-flows" and "diff-flows".
      - Commands to add and remove flows can now read from files.
      - New --flow-format option to enable or disable NXM.
      - New --more option to increase OpenFlow message verbosity.
      - Removed "tun-cookie" command, which is no longer useful.
    - ovs-controller enhancements for testing various features.
    - New ovs-vlan-test command for testing for Linux kernel driver VLAN
      bugs.  New ovs-vlan-bug-workaround command for enabling and
      disabling a workaround for these driver bugs.
    - OpenFlow support:
      - "Resubmit" actions now update flow statistics. 
      - New "register" extension for use in matching and actions, via NXM.
      - New "multipath" experimental action extension.
      - New support for matching multicast Ethernet frames, via NXM.
      - New extension for OpenFlow vendor error codes.
      - New extension to set the QoS output queue without actually
        sending to an output port.
      - Open vSwitch now reports a single flow table, instead of
        separate hash and wildcard tables.  This better models the
        current implementation.
      - New experimental "note" action.
      - New "ofproto/trace" ovs-appctl command and associated utilities
        to ease debugging complex flow tables.
    - Database:
      - Schema documentation now includes an entity-relationship diagram.
      - The database is now garbage collected.  In most tables,
        unreferenced rows will be deleted automatically.
      - Many tables now include statistics updated periodically by
        ovs-vswitchd or ovsdb-server.
      - Every table now has an "external-ids" column for use by OVS
        integrators.
      - There is no default controller anymore.  Each bridge must have its
        controller individually specified.
      - The "fail-mode" is now a property of a Bridge instead of a Controller.
      - New versioning and checksum features.
      - New Managers table and manager_options column in Open_vSwitch table
        for specifying managers.  The old "managers" column in the
        Open_vSwitch table has been removed.
      - Many "name" columns are now immutable.
    - Feature removals:
      - Dropped support for XenServer pre-5.6.100.
      - Dropped support for Linux pre-2.6.18.
      - Dropped controller discovery support.
      - Dropped "ovs-ofctl status" and the OpenFlow extension that it used.
        Statistics reporting in the database is a rough equivalent.
      - Dropped the "corekeeper" package (now separate, at
        http://openvswitch.org/cgi-bin/gitweb.cgi?p=corekeeper).
    - Performance and scalability improvements
    - Bug fixes

  [ Simon Horman ]
  * Add the following fixes from upstream branch-1.1
    - 7f1aca9 dpif-linux: Avoid logging error on ENOENT in
              dpif_linux_is_internal_device().
    - 8996f83 dpif-linux: Avoid segfault on netdev_get_stats() without kernel
              module.
    - 002d4a3 vswitch: Improve schema documentation.
    - 58bd294 cfm: Fix broken fault logic.
    - c042664 bridge: Run once before configuring CFM.
   * Switch to dpkg-source 3.0 (quilt) format

 -- Simon Horman <horms@debian.org>  Wed, 27 Apr 2011 17:11:10 +0900

openvswitch (1.1.0~pre2.g2.ea763e0e-1) unstable; urgency=low

  * Git snapshot, including
    - tests: Fix Y2011 bug in testsuite
      (closes: #609506)

 -- Simon Horman <horms@debian.org>  Wed, 12 Jan 2011 08:34:35 +0900

openvswitch (1.1.0~pre2.g1.bbe8d06e-1) unstable; urgency=low

  * Git snaptshot

 -- Simon Horman <horms@debian.org>  Thu, 06 Jan 2011 11:11:55 +0900

openvswitch (1.1.0~pre2-5) unstable; urgency=low

  * Open vSwitch only works on Linux so set
    the Architecture of binary packages to linux-any accordingly

 -- Simon Horman <horms@debian.org>  Tue, 23 Nov 2010 07:55:19 +0900

openvswitch (1.1.0~pre2-4) unstable; urgency=low

  * Add procps to Build-Depends
    (closes: #602891)

 -- Simon Horman <horms@debian.org>  Tue, 16 Nov 2010 06:46:17 +0900

openvswitch (1.1.0~pre2-3) unstable; urgency=low

  * Remove the corekeeper package as it isn't strongly related
    to Open vSwitch. It has subsequently been broken off into
    a separate source repository and may be uploaded as its
    own debian source package.
    http://openvswitch.org/cgi-bin/gitweb.cgi?p=corekeeper;a=summary
    (closes: #602946)
  * Avoid the use of long socket names.
    (closes: #602891, closes: #602911)

 -- Simon Horman <horms@debian.org>  Thu, 11 Nov 2010 06:35:05 +0900

openvswitch (1.1.0~pre2-2) unstable; urgency=low

  * Clarify licensing of files in xenserver/

 -- Simon Horman <horms@debian.org>  Thu, 23 Sep 2010 10:56:18 +0900

openvswitch (1.1.0~pre2-1) unstable; urgency=low

  * New upstream version
    - Bug fixes

 -- Simon Horman <horms@debian.org>  Wed, 15 Sep 2010 18:28:59 +0900

openvswitch (1.1.0~pre1-1) unstable; urgency=low

  * New upstream version
    - OpenFlow 1.0 slicing (QoS) functionality
    - Python bindings for configuration database (no write support)
    - Performance and scalability improvements
    - Bug fixes

 -- Open vSwitch team <dev@openvswitch.org>  Tue, 31 Aug 2010 23:20:00 +0000

openvswitch (1.0.1-1) unstable; urgency=low

  * New upstream version.

 -- Open vSwitch team <dev@openvswitch.org>  Mon, 17 May 2010 10:36:00 +0000