9d8e67f3ad81968972deb914ac3df5c4e74883af
[sliver-openvswitch.git] / lib / netdev-provider.h
1 /*
2  * Copyright (c) 2009, 2010, 2011, 2012, 2013 Nicira, Inc.
3  *
4  * Licensed under the Apache License, Version 2.0 (the "License");
5  * you may not use this file except in compliance with the License.
6  * You may obtain a copy of the License at:
7  *
8  *     http://www.apache.org/licenses/LICENSE-2.0
9  *
10  * Unless required by applicable law or agreed to in writing, software
11  * distributed under the License is distributed on an "AS IS" BASIS,
12  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
13  * See the License for the specific language governing permissions and
14  * limitations under the License.
15  */
16
17 #ifndef NETDEV_PROVIDER_H
18 #define NETDEV_PROVIDER_H 1
19
20 /* Generic interface to network devices. */
21
22 #include "connectivity.h"
23 #include "netdev.h"
24 #include "list.h"
25 #include "seq.h"
26 #include "shash.h"
27 #include "smap.h"
28
29 #ifdef  __cplusplus
30 extern "C" {
31 #endif
32
33 /* A network device (e.g. an Ethernet device).
34  *
35  * Network device implementations may read these members but should not modify
36  * them. */
37 struct netdev {
38     /* The following do not change during the lifetime of a struct netdev. */
39     char *name;                         /* Name of network device. */
40     const struct netdev_class *netdev_class; /* Functions to control
41                                                 this device. */
42
43     /* A sequence number which indicates changes in one of 'netdev''s
44      * properties.   It must be nonzero so that users have a value which
45      * they may use as a reset when tracking 'netdev'.
46      *
47      * Minimally, the sequence number is required to change whenever
48      * 'netdev''s flags, features, ethernet address, or carrier changes. */
49     uint64_t change_seq;
50
51     /* The following are protected by 'netdev_mutex' (internal to netdev.c). */
52     int n_rxq;
53     int ref_cnt;                        /* Times this devices was opened. */
54     struct shash_node *node;            /* Pointer to element in global map. */
55     struct list saved_flags_list; /* Contains "struct netdev_saved_flags". */
56 };
57
58 static void
59 netdev_change_seq_changed(struct netdev *netdev)
60 {
61     seq_change(connectivity_seq_get());
62     netdev->change_seq++;
63     if (!netdev->change_seq) {
64         netdev->change_seq++;
65     }
66 }
67
68 const char *netdev_get_type(const struct netdev *);
69 const struct netdev_class *netdev_get_class(const struct netdev *);
70 const char *netdev_get_name(const struct netdev *);
71 struct netdev *netdev_from_name(const char *name);
72 void netdev_get_devices(const struct netdev_class *,
73                         struct shash *device_list);
74
75 /* A data structure for capturing packets received by a network device.
76  *
77  * Network device implementations may read these members but should not modify
78  * them.
79  *
80  * None of these members change during the lifetime of a struct netdev_rxq. */
81 struct netdev_rxq {
82     struct netdev *netdev;      /* Owns a reference to the netdev. */
83     int queue_id;
84 };
85
86 struct netdev *netdev_rxq_get_netdev(const struct netdev_rxq *);
87
88 /* Network device class structure, to be defined by each implementation of a
89  * network device.
90  *
91  * These functions return 0 if successful or a positive errno value on failure,
92  * except where otherwise noted.
93  *
94  *
95  * Data Structures
96  * ===============
97  *
98  * These functions work primarily with two different kinds of data structures:
99  *
100  *   - "struct netdev", which represents a network device.
101  *
102  *   - "struct netdev_rxq", which represents a handle for capturing packets
103  *     received on a network device
104  *
105  * Each of these data structures contains all of the implementation-independent
106  * generic state for the respective concept, called the "base" state.  None of
107  * them contains any extra space for implementations to use.  Instead, each
108  * implementation is expected to declare its own data structure that contains
109  * an instance of the generic data structure plus additional
110  * implementation-specific members, called the "derived" state.  The
111  * implementation can use casts or (preferably) the CONTAINER_OF macro to
112  * obtain access to derived state given only a pointer to the embedded generic
113  * data structure.
114  *
115  *
116  * Life Cycle
117  * ==========
118  *
119  * Four stylized functions accompany each of these data structures:
120  *
121  *            "alloc"          "construct"        "destruct"       "dealloc"
122  *            ------------   ----------------  ---------------  --------------
123  * netdev      ->alloc        ->construct        ->destruct        ->dealloc
124  * netdev_rxq  ->rxq_alloc    ->rxq_construct    ->rxq_destruct    ->rxq_dealloc
125  *
126  * Any instance of a given data structure goes through the following life
127  * cycle:
128  *
129  *   1. The client calls the "alloc" function to obtain raw memory.  If "alloc"
130  *      fails, skip all the other steps.
131  *
132  *   2. The client initializes all of the data structure's base state.  If this
133  *      fails, skip to step 7.
134  *
135  *   3. The client calls the "construct" function.  The implementation
136  *      initializes derived state.  It may refer to the already-initialized
137  *      base state.  If "construct" fails, skip to step 6.
138  *
139  *   4. The data structure is now initialized and in use.
140  *
141  *   5. When the data structure is no longer needed, the client calls the
142  *      "destruct" function.  The implementation uninitializes derived state.
143  *      The base state has not been uninitialized yet, so the implementation
144  *      may still refer to it.
145  *
146  *   6. The client uninitializes all of the data structure's base state.
147  *
148  *   7. The client calls the "dealloc" to free the raw memory.  The
149  *      implementation must not refer to base or derived state in the data
150  *      structure, because it has already been uninitialized.
151  *
152  * If netdev support multi-queue IO then netdev->construct should set initialize
153  * netdev->n_rxq to number of queues.
154  *
155  * Each "alloc" function allocates and returns a new instance of the respective
156  * data structure.  The "alloc" function is not given any information about the
157  * use of the new data structure, so it cannot perform much initialization.
158  * Its purpose is just to ensure that the new data structure has enough room
159  * for base and derived state.  It may return a null pointer if memory is not
160  * available, in which case none of the other functions is called.
161  *
162  * Each "construct" function initializes derived state in its respective data
163  * structure.  When "construct" is called, all of the base state has already
164  * been initialized, so the "construct" function may refer to it.  The
165  * "construct" function is allowed to fail, in which case the client calls the
166  * "dealloc" function (but not the "destruct" function).
167  *
168  * Each "destruct" function uninitializes and frees derived state in its
169  * respective data structure.  When "destruct" is called, the base state has
170  * not yet been uninitialized, so the "destruct" function may refer to it.  The
171  * "destruct" function is not allowed to fail.
172  *
173  * Each "dealloc" function frees raw memory that was allocated by the the
174  * "alloc" function.  The memory's base and derived members might not have ever
175  * been initialized (but if "construct" returned successfully, then it has been
176  * "destruct"ed already).  The "dealloc" function is not allowed to fail.
177  *
178  *
179  * Device Change Notification
180  * ==========================
181  *
182  * Minimally, implementations are required to report changes to netdev flags,
183  * features, ethernet address or carrier through connectivity_seq. Changes to
184  * other properties are allowed to cause notification through this interface,
185  * although implementations should try to avoid this. connectivity_seq_get()
186  * can be used to acquire a reference to the struct seq. The interface is
187  * described in detail in seq.h. */
188 struct netdev_class {
189     /* Type of netdevs in this class, e.g. "system", "tap", "gre", etc.
190      *
191      * One of the providers should supply a "system" type, since this is
192      * the type assumed if no type is specified when opening a netdev.
193      * The "system" type corresponds to an existing network device on
194      * the system. */
195     const char *type;
196
197 /* ## ------------------- ## */
198 /* ## Top-Level Functions ## */
199 /* ## ------------------- ## */
200
201     /* Called when the netdev provider is registered, typically at program
202      * startup.  Returning an error from this function will prevent any network
203      * device in this class from being opened.
204      *
205      * This function may be set to null if a network device class needs no
206      * initialization at registration time. */
207     int (*init)(void);
208
209     /* Performs periodic work needed by netdevs of this class.  May be null if
210      * no periodic work is necessary. */
211     void (*run)(void);
212
213     /* Arranges for poll_block() to wake up if the "run" member function needs
214      * to be called.  Implementations are additionally required to wake
215      * whenever something changes in any of its netdevs which would cause their
216      * ->change_seq() function to change its result.  May be null if nothing is
217      * needed here. */
218     void (*wait)(void);
219
220 /* ## ---------------- ## */
221 /* ## netdev Functions ## */
222 /* ## ---------------- ## */
223
224     /* Life-cycle functions for a netdev.  See the large comment above on
225      * struct netdev_class. */
226     struct netdev *(*alloc)(void);
227     int (*construct)(struct netdev *);
228     void (*destruct)(struct netdev *);
229     void (*dealloc)(struct netdev *);
230
231     /* Fetches the device 'netdev''s configuration, storing it in 'args'.
232      * The caller owns 'args' and pre-initializes it to an empty smap.
233      *
234      * If this netdev class does not have any configuration options, this may
235      * be a null pointer. */
236     int (*get_config)(const struct netdev *netdev, struct smap *args);
237
238     /* Changes the device 'netdev''s configuration to 'args'.
239      *
240      * If this netdev class does not support configuration, this may be a null
241      * pointer. */
242     int (*set_config)(struct netdev *netdev, const struct smap *args);
243
244     /* Returns the tunnel configuration of 'netdev'.  If 'netdev' is
245      * not a tunnel, returns null.
246      *
247      * If this function would always return null, it may be null instead. */
248     const struct netdev_tunnel_config *
249         (*get_tunnel_config)(const struct netdev *netdev);
250
251     /* Sends the buffer on 'netdev'.
252      * Returns 0 if successful, otherwise a positive errno value.  Returns
253      * EAGAIN without blocking if the packet cannot be queued immediately.
254      * Returns EMSGSIZE if a partial packet was transmitted or if the packet
255      * is too big or too small to transmit on the device.
256      *
257      * To retain ownership of 'buffer' caller can set may_steal to false.
258      *
259      * The network device is expected to maintain a packet transmission queue,
260      * so that the caller does not ordinarily have to do additional queuing of
261      * packets.
262      *
263      * May return EOPNOTSUPP if a network device does not implement packet
264      * transmission through this interface.  This function may be set to null
265      * if it would always return EOPNOTSUPP anyhow.  (This will prevent the
266      * network device from being usefully used by the netdev-based "userspace
267      * datapath".  It will also prevent the OVS implementation of bonding from
268      * working properly over 'netdev'.) */
269     int (*send)(struct netdev *netdev, struct ofpbuf *buffer, bool may_steal);
270
271     /* Registers with the poll loop to wake up from the next call to
272      * poll_block() when the packet transmission queue for 'netdev' has
273      * sufficient room to transmit a packet with netdev_send().
274      *
275      * The network device is expected to maintain a packet transmission queue,
276      * so that the caller does not ordinarily have to do additional queuing of
277      * packets.  Thus, this function is unlikely to ever be useful.
278      *
279      * May be null if not needed, such as for a network device that does not
280      * implement packet transmission through the 'send' member function. */
281     void (*send_wait)(struct netdev *netdev);
282
283     /* Sets 'netdev''s Ethernet address to 'mac' */
284     int (*set_etheraddr)(struct netdev *netdev, const uint8_t mac[6]);
285
286     /* Retrieves 'netdev''s Ethernet address into 'mac'.
287      *
288      * This address will be advertised as 'netdev''s MAC address through the
289      * OpenFlow protocol, among other uses. */
290     int (*get_etheraddr)(const struct netdev *netdev, uint8_t mac[6]);
291
292     /* Retrieves 'netdev''s MTU into '*mtup'.
293      *
294      * The MTU is the maximum size of transmitted (and received) packets, in
295      * bytes, not including the hardware header; thus, this is typically 1500
296      * bytes for Ethernet devices.
297      *
298      * If 'netdev' does not have an MTU (e.g. as some tunnels do not), then
299      * this function should return EOPNOTSUPP.  This function may be set to
300      * null if it would always return EOPNOTSUPP. */
301     int (*get_mtu)(const struct netdev *netdev, int *mtup);
302
303     /* Sets 'netdev''s MTU to 'mtu'.
304      *
305      * If 'netdev' does not have an MTU (e.g. as some tunnels do not), then
306      * this function should return EOPNOTSUPP.  This function may be set to
307      * null if it would always return EOPNOTSUPP. */
308     int (*set_mtu)(const struct netdev *netdev, int mtu);
309
310     /* Returns the ifindex of 'netdev', if successful, as a positive number.
311      * On failure, returns a negative errno value.
312      *
313      * The desired semantics of the ifindex value are a combination of those
314      * specified by POSIX for if_nametoindex() and by SNMP for ifIndex.  An
315      * ifindex value should be unique within a host and remain stable at least
316      * until reboot.  SNMP says an ifindex "ranges between 1 and the value of
317      * ifNumber" but many systems do not follow this rule anyhow.
318      *
319      * This function may be set to null if it would always return -EOPNOTSUPP.
320      */
321     int (*get_ifindex)(const struct netdev *netdev);
322
323     /* Sets 'carrier' to true if carrier is active (link light is on) on
324      * 'netdev'.
325      *
326      * May be null if device does not provide carrier status (will be always
327      * up as long as device is up).
328      */
329     int (*get_carrier)(const struct netdev *netdev, bool *carrier);
330
331     /* Returns the number of times 'netdev''s carrier has changed since being
332      * initialized.
333      *
334      * If null, callers will assume the number of carrier resets is zero. */
335     long long int (*get_carrier_resets)(const struct netdev *netdev);
336
337     /* Forces ->get_carrier() to poll 'netdev''s MII registers for link status
338      * instead of checking 'netdev''s carrier.  'netdev''s MII registers will
339      * be polled once ever 'interval' milliseconds.  If 'netdev' does not
340      * support MII, another method may be used as a fallback.  If 'interval' is
341      * less than or equal to zero, reverts ->get_carrier() to its normal
342      * behavior.
343      *
344      * Most network devices won't support this feature and will set this
345      * function pointer to NULL, which is equivalent to returning EOPNOTSUPP.
346      */
347     int (*set_miimon_interval)(struct netdev *netdev, long long int interval);
348
349     /* Retrieves current device stats for 'netdev' into 'stats'.
350      *
351      * A network device that supports some statistics but not others, it should
352      * set the values of the unsupported statistics to all-1-bits
353      * (UINT64_MAX). */
354     int (*get_stats)(const struct netdev *netdev, struct netdev_stats *);
355
356     /* Sets the device stats for 'netdev' to 'stats'.
357      *
358      * Most network devices won't support this feature and will set this
359      * function pointer to NULL, which is equivalent to returning EOPNOTSUPP.
360      *
361      * Some network devices might only allow setting their stats to 0. */
362     int (*set_stats)(struct netdev *netdev, const struct netdev_stats *);
363
364     /* Stores the features supported by 'netdev' into each of '*current',
365      * '*advertised', '*supported', and '*peer'.  Each value is a bitmap of
366      * NETDEV_F_* bits.
367      *
368      * This function may be set to null if it would always return EOPNOTSUPP.
369      */
370     int (*get_features)(const struct netdev *netdev,
371                         enum netdev_features *current,
372                         enum netdev_features *advertised,
373                         enum netdev_features *supported,
374                         enum netdev_features *peer);
375
376     /* Set the features advertised by 'netdev' to 'advertise', which is a
377      * set of NETDEV_F_* bits.
378      *
379      * This function may be set to null for a network device that does not
380      * support configuring advertisements. */
381     int (*set_advertisements)(struct netdev *netdev,
382                               enum netdev_features advertise);
383
384     /* Attempts to set input rate limiting (policing) policy, such that up to
385      * 'kbits_rate' kbps of traffic is accepted, with a maximum accumulative
386      * burst size of 'kbits' kb.
387      *
388      * This function may be set to null if policing is not supported. */
389     int (*set_policing)(struct netdev *netdev, unsigned int kbits_rate,
390                         unsigned int kbits_burst);
391
392     /* Adds to 'types' all of the forms of QoS supported by 'netdev', or leaves
393      * it empty if 'netdev' does not support QoS.  Any names added to 'types'
394      * should be documented as valid for the "type" column in the "QoS" table
395      * in vswitchd/vswitch.xml (which is built as ovs-vswitchd.conf.db(8)).
396      *
397      * Every network device must support disabling QoS with a type of "", but
398      * this function must not add "" to 'types'.
399      *
400      * The caller is responsible for initializing 'types' (e.g. with
401      * sset_init()) before calling this function.  The caller retains ownership
402      * of 'types'.
403      *
404      * May be NULL if 'netdev' does not support QoS at all. */
405     int (*get_qos_types)(const struct netdev *netdev, struct sset *types);
406
407     /* Queries 'netdev' for its capabilities regarding the specified 'type' of
408      * QoS.  On success, initializes 'caps' with the QoS capabilities.
409      *
410      * Should return EOPNOTSUPP if 'netdev' does not support 'type'.  May be
411      * NULL if 'netdev' does not support QoS at all. */
412     int (*get_qos_capabilities)(const struct netdev *netdev,
413                                 const char *type,
414                                 struct netdev_qos_capabilities *caps);
415
416     /* Queries 'netdev' about its currently configured form of QoS.  If
417      * successful, stores the name of the current form of QoS into '*typep'
418      * and any details of configuration as string key-value pairs in
419      * 'details'.
420      *
421      * A '*typep' of "" indicates that QoS is currently disabled on 'netdev'.
422      *
423      * The caller initializes 'details' before calling this function.  The
424      * caller takes ownership of the string key-values pairs added to
425      * 'details'.
426      *
427      * The netdev retains ownership of '*typep'.
428      *
429      * '*typep' will be one of the types returned by netdev_get_qos_types() for
430      * 'netdev'.  The contents of 'details' should be documented as valid for
431      * '*typep' in the "other_config" column in the "QoS" table in
432      * vswitchd/vswitch.xml (which is built as ovs-vswitchd.conf.db(8)).
433      *
434      * May be NULL if 'netdev' does not support QoS at all. */
435     int (*get_qos)(const struct netdev *netdev,
436                    const char **typep, struct smap *details);
437
438     /* Attempts to reconfigure QoS on 'netdev', changing the form of QoS to
439      * 'type' with details of configuration from 'details'.
440      *
441      * On error, the previous QoS configuration is retained.
442      *
443      * When this function changes the type of QoS (not just 'details'), this
444      * also resets all queue configuration for 'netdev' to their defaults
445      * (which depend on the specific type of QoS).  Otherwise, the queue
446      * configuration for 'netdev' is unchanged.
447      *
448      * 'type' should be "" (to disable QoS) or one of the types returned by
449      * netdev_get_qos_types() for 'netdev'.  The contents of 'details' should
450      * be documented as valid for the given 'type' in the "other_config" column
451      * in the "QoS" table in vswitchd/vswitch.xml (which is built as
452      * ovs-vswitchd.conf.db(8)).
453      *
454      * May be NULL if 'netdev' does not support QoS at all. */
455     int (*set_qos)(struct netdev *netdev,
456                    const char *type, const struct smap *details);
457
458     /* Queries 'netdev' for information about the queue numbered 'queue_id'.
459      * If successful, adds that information as string key-value pairs to
460      * 'details'.  Returns 0 if successful, otherwise a positive errno value.
461      *
462      * Should return EINVAL if 'queue_id' is greater than or equal to the
463      * number of supported queues (as reported in the 'n_queues' member of
464      * struct netdev_qos_capabilities by 'get_qos_capabilities').
465      *
466      * The caller initializes 'details' before calling this function.  The
467      * caller takes ownership of the string key-values pairs added to
468      * 'details'.
469      *
470      * The returned contents of 'details' should be documented as valid for the
471      * given 'type' in the "other_config" column in the "Queue" table in
472      * vswitchd/vswitch.xml (which is built as ovs-vswitchd.conf.db(8)).
473      */
474     int (*get_queue)(const struct netdev *netdev,
475                      unsigned int queue_id, struct smap *details);
476
477     /* Configures the queue numbered 'queue_id' on 'netdev' with the key-value
478      * string pairs in 'details'.  The contents of 'details' should be
479      * documented as valid for the given 'type' in the "other_config" column in
480      * the "Queue" table in vswitchd/vswitch.xml (which is built as
481      * ovs-vswitchd.conf.db(8)).  Returns 0 if successful, otherwise a positive
482      * errno value.  On failure, the given queue's configuration should be
483      * unmodified.
484      *
485      * Should return EINVAL if 'queue_id' is greater than or equal to the
486      * number of supported queues (as reported in the 'n_queues' member of
487      * struct netdev_qos_capabilities by 'get_qos_capabilities'), or if
488      * 'details' is invalid for the type of queue.
489      *
490      * This function does not modify 'details', and the caller retains
491      * ownership of it.
492      *
493      * May be NULL if 'netdev' does not support QoS at all. */
494     int (*set_queue)(struct netdev *netdev,
495                      unsigned int queue_id, const struct smap *details);
496
497     /* Attempts to delete the queue numbered 'queue_id' from 'netdev'.
498      *
499      * Should return EINVAL if 'queue_id' is greater than or equal to the
500      * number of supported queues (as reported in the 'n_queues' member of
501      * struct netdev_qos_capabilities by 'get_qos_capabilities').  Should
502      * return EOPNOTSUPP if 'queue_id' is valid but may not be deleted (e.g. if
503      * 'netdev' has a fixed set of queues with the current QoS mode).
504      *
505      * May be NULL if 'netdev' does not support QoS at all, or if all of its
506      * QoS modes have fixed sets of queues. */
507     int (*delete_queue)(struct netdev *netdev, unsigned int queue_id);
508
509     /* Obtains statistics about 'queue_id' on 'netdev'.  Fills 'stats' with the
510      * queue's statistics.  May set individual members of 'stats' to all-1-bits
511      * if the statistic is unavailable.
512      *
513      * May be NULL if 'netdev' does not support QoS at all. */
514     int (*get_queue_stats)(const struct netdev *netdev, unsigned int queue_id,
515                            struct netdev_queue_stats *stats);
516
517     /* Attempts to begin dumping the queues in 'netdev'.  On success, returns 0
518      * and initializes '*statep' with any data needed for iteration.  On
519      * failure, returns a positive errno value.
520      *
521      * May be NULL if 'netdev' does not support QoS at all. */
522     int (*queue_dump_start)(const struct netdev *netdev, void **statep);
523
524     /* Attempts to retrieve another queue from 'netdev' for 'state', which was
525      * initialized by a successful call to the 'queue_dump_start' function for
526      * 'netdev'.  On success, stores a queue ID into '*queue_id' and fills
527      * 'details' with the configuration of the queue with that ID.  Returns EOF
528      * if the last queue has been dumped, or a positive errno value on error.
529      * This function will not be called again once it returns nonzero once for
530      * a given iteration (but the 'queue_dump_done' function will be called
531      * afterward).
532      *
533      * The caller initializes and clears 'details' before calling this
534      * function.  The caller takes ownership of the string key-values pairs
535      * added to 'details'.
536      *
537      * The returned contents of 'details' should be documented as valid for the
538      * given 'type' in the "other_config" column in the "Queue" table in
539      * vswitchd/vswitch.xml (which is built as ovs-vswitchd.conf.db(8)).
540      *
541      * May be NULL if 'netdev' does not support QoS at all. */
542     int (*queue_dump_next)(const struct netdev *netdev, void *state,
543                            unsigned int *queue_id, struct smap *details);
544
545     /* Releases resources from 'netdev' for 'state', which was initialized by a
546      * successful call to the 'queue_dump_start' function for 'netdev'.
547      *
548      * May be NULL if 'netdev' does not support QoS at all. */
549     int (*queue_dump_done)(const struct netdev *netdev, void *state);
550
551     /* Iterates over all of 'netdev''s queues, calling 'cb' with the queue's
552      * ID, its statistics, and the 'aux' specified by the caller.  The order of
553      * iteration is unspecified, but (when successful) each queue must be
554      * visited exactly once.
555      *
556      * 'cb' will not modify or free the statistics passed in. */
557     int (*dump_queue_stats)(const struct netdev *netdev,
558                             void (*cb)(unsigned int queue_id,
559                                        struct netdev_queue_stats *,
560                                        void *aux),
561                             void *aux);
562
563     /* If 'netdev' has an assigned IPv4 address, sets '*address' to that
564      * address and '*netmask' to the associated netmask.
565      *
566      * The following error values have well-defined meanings:
567      *
568      *   - EADDRNOTAVAIL: 'netdev' has no assigned IPv4 address.
569      *
570      *   - EOPNOTSUPP: No IPv4 network stack attached to 'netdev'.
571      *
572      * This function may be set to null if it would always return EOPNOTSUPP
573      * anyhow. */
574     int (*get_in4)(const struct netdev *netdev, struct in_addr *address,
575                    struct in_addr *netmask);
576
577     /* Assigns 'addr' as 'netdev''s IPv4 address and 'mask' as its netmask.  If
578      * 'addr' is INADDR_ANY, 'netdev''s IPv4 address is cleared.
579      *
580      * This function may be set to null if it would always return EOPNOTSUPP
581      * anyhow. */
582     int (*set_in4)(struct netdev *netdev, struct in_addr addr,
583                    struct in_addr mask);
584
585     /* If 'netdev' has an assigned IPv6 address, sets '*in6' to that address.
586      *
587      * The following error values have well-defined meanings:
588      *
589      *   - EADDRNOTAVAIL: 'netdev' has no assigned IPv6 address.
590      *
591      *   - EOPNOTSUPP: No IPv6 network stack attached to 'netdev'.
592      *
593      * This function may be set to null if it would always return EOPNOTSUPP
594      * anyhow. */
595     int (*get_in6)(const struct netdev *netdev, struct in6_addr *in6);
596
597     /* Adds 'router' as a default IP gateway for the TCP/IP stack that
598      * corresponds to 'netdev'.
599      *
600      * This function may be set to null if it would always return EOPNOTSUPP
601      * anyhow. */
602     int (*add_router)(struct netdev *netdev, struct in_addr router);
603
604     /* Looks up the next hop for 'host'.  If successful, stores the next hop
605      * gateway's address (0 if 'host' is on a directly connected network) in
606      * '*next_hop' and a copy of the name of the device to reach 'host' in
607      * '*netdev_name', and returns 0.  The caller is responsible for freeing
608      * '*netdev_name' (by calling free()).
609      *
610      * This function may be set to null if it would always return EOPNOTSUPP
611      * anyhow. */
612     int (*get_next_hop)(const struct in_addr *host, struct in_addr *next_hop,
613                         char **netdev_name);
614
615     /* Retrieves driver information of the device.
616      *
617      * Populates 'smap' with key-value pairs representing the status of the
618      * device.  'smap' is a set of key-value string pairs representing netdev
619      * type specific information.  For more information see
620      * ovs-vswitchd.conf.db(5).
621      *
622      * The caller is responsible for destroying 'smap' and its data.
623      *
624      * This function may be set to null if it would always return EOPNOTSUPP
625      * anyhow. */
626     int (*get_status)(const struct netdev *netdev, struct smap *smap);
627
628     /* Looks up the ARP table entry for 'ip' on 'netdev' and stores the
629      * corresponding MAC address in 'mac'.  A return value of ENXIO, in
630      * particular, indicates that there is no ARP table entry for 'ip' on
631      * 'netdev'.
632      *
633      * This function may be set to null if it would always return EOPNOTSUPP
634      * anyhow. */
635     int (*arp_lookup)(const struct netdev *netdev, ovs_be32 ip,
636                       uint8_t mac[6]);
637
638     /* Retrieves the current set of flags on 'netdev' into '*old_flags'.  Then,
639      * turns off the flags that are set to 1 in 'off' and turns on the flags
640      * that are set to 1 in 'on'.  (No bit will be set to 1 in both 'off' and
641      * 'on'; that is, off & on == 0.)
642      *
643      * This function may be invoked from a signal handler.  Therefore, it
644      * should not do anything that is not signal-safe (such as logging). */
645     int (*update_flags)(struct netdev *netdev, enum netdev_flags off,
646                         enum netdev_flags on, enum netdev_flags *old_flags);
647
648 /* ## -------------------- ## */
649 /* ## netdev_rxq Functions ## */
650 /* ## -------------------- ## */
651
652 /* If a particular netdev class does not support receiving packets, all these
653  * function pointers must be NULL. */
654
655     /* Life-cycle functions for a netdev_rxq.  See the large comment above on
656      * struct netdev_class. */
657     struct netdev_rxq *(*rxq_alloc)(void);
658     int (*rxq_construct)(struct netdev_rxq *);
659     void (*rxq_destruct)(struct netdev_rxq *);
660     void (*rxq_dealloc)(struct netdev_rxq *);
661
662     /* Attempts to receive batch of packets from 'rx' and place array of pointers
663      * into '*pkt'. netdev is responsible for allocating buffers.
664      * '*cnt' points to packet count for given batch. Once packets are returned
665      * to caller, netdev should give up ownership of ofpbuf data.
666      *
667      * Implementations should allocate buffer with DP_NETDEV_HEADROOM headroom
668      * and add a VLAN header which is obtained out-of-band to the packet.
669      *
670      * Caller is expected to pass array of size MAX_RX_BATCH.
671      * This function may be set to null if it would always return EOPNOTSUPP
672      * anyhow. */
673     int (*rxq_recv)(struct netdev_rxq *rx, struct ofpbuf **pkt, int *cnt);
674
675     /* Registers with the poll loop to wake up from the next call to
676      * poll_block() when a packet is ready to be received with netdev_rxq_recv()
677      * on 'rx'. */
678     void (*rxq_wait)(struct netdev_rxq *rx);
679
680     /* Discards all packets waiting to be received from 'rx'. */
681     int (*rxq_drain)(struct netdev_rxq *rx);
682 };
683
684 int netdev_register_provider(const struct netdev_class *);
685 int netdev_unregister_provider(const char *type);
686
687 extern const struct netdev_class netdev_linux_class;
688 extern const struct netdev_class netdev_internal_class;
689 extern const struct netdev_class netdev_tap_class;
690 #if defined(__FreeBSD__) || defined(__NetBSD__)
691 extern const struct netdev_class netdev_bsd_class;
692 #endif
693
694 #ifdef  __cplusplus
695 }
696 #endif
697
698 #endif /* netdev.h */