tests/learn.at

   1 AT_BANNER([learning action])
   2
   3 AT_SETUP([learning action - parsing and formatting])
   4 AT_DATA([flows.txt], [[
   5 actions=learn()
   6 actions=learn(NXM_OF_VLAN_TCI[0..11], NXM_OF_ETH_DST[]=NXM_OF_ETH_SRC[], output:NXM_OF_IN_PORT[], load:10->NXM_NX_REG0[5..10])
   7 actions=learn(table=1,idle_timeout=10, hard_timeout=20, fin_idle_timeout=5, fin_hard_timeout=10, priority=10, cookie=0xfedcba9876543210, in_port=99,NXM_OF_ETH_DST[]=NXM_OF_ETH_SRC[],load:NXM_OF_IN_PORT[]->NXM_NX_REG1[16..31])
   8 ]])
   9 AT_CHECK([ovs-ofctl parse-flows flows.txt], [0],
  10 [[usable protocols: any
  11 chosen protocol: OpenFlow10-table_id
  12 OFPT_FLOW_MOD (xid=0x1): ADD actions=learn(table=1)
  13 OFPT_FLOW_MOD (xid=0x2): ADD actions=learn(table=1,NXM_OF_VLAN_TCI[0..11],NXM_OF_ETH_DST[]=NXM_OF_ETH_SRC[],output:NXM_OF_IN_PORT[],load:0xa->NXM_NX_REG0[5..10])
  14 OFPT_FLOW_MOD (xid=0x3): ADD actions=learn(table=1,idle_timeout=10,hard_timeout=20,fin_idle_timeout=5,fin_hard_timeout=10,priority=10,cookie=0xfedcba9876543210,in_port=99,NXM_OF_ETH_DST[]=NXM_OF_ETH_SRC[],load:NXM_OF_IN_PORT[]->NXM_NX_REG1[16..31])
  15 ]])
  16 AT_CLEANUP
  17
  18 AT_SETUP([learning action - examples])
  19 AT_DATA([flows.txt], [[
  20 # These are the examples from nicira-ext.h.
  21 actions=learn(in_port=99,NXM_OF_ETH_DST[]=NXM_OF_ETH_SRC[], load:NXM_OF_IN_PORT[]->NXM_NX_REG1[16..31])
  22 actions=learn(NXM_OF_VLAN_TCI[0..11], NXM_OF_ETH_DST[]=NXM_OF_ETH_SRC[],output:NXM_OF_IN_PORT[])
  23 table=0 actions=learn(table=1,hard_timeout=10, NXM_OF_VLAN_TCI[0..11],output:NXM_OF_IN_PORT[]), resubmit(,1)
  24 table=1 priority=0 actions=flood
  25 ]])
  26 AT_CHECK([ovs-ofctl parse-flows flows.txt], [0],
  27 [[usable protocols: OXM,OpenFlow10+table_id,NXM+table_id
  28 chosen protocol: OpenFlow10+table_id
  29 OFPT_FLOW_MOD (xid=0x1): ADD table:255 actions=learn(table=1,in_port=99,NXM_OF_ETH_DST[]=NXM_OF_ETH_SRC[],load:NXM_OF_IN_PORT[]->NXM_NX_REG1[16..31])
  30 OFPT_FLOW_MOD (xid=0x2): ADD table:255 actions=learn(table=1,NXM_OF_VLAN_TCI[0..11],NXM_OF_ETH_DST[]=NXM_OF_ETH_SRC[],output:NXM_OF_IN_PORT[])
  31 OFPT_FLOW_MOD (xid=0x3): ADD actions=learn(table=1,hard_timeout=10,NXM_OF_VLAN_TCI[0..11],output:NXM_OF_IN_PORT[]),resubmit(,1)
  32 OFPT_FLOW_MOD (xid=0x4): ADD table:1 priority=0 actions=FLOOD
  33 ]])
  34 AT_CLEANUP
  35
  36 AT_SETUP([learning action - satisfied prerequisites])
  37 AT_DATA([flows.txt],
  38 [[actions=learn(eth_type=0x800,load:5->NXM_OF_IP_DST[])
  39 ip,actions=learn(load:NXM_OF_IP_DST[]->NXM_NX_REG1[])
  40 ip,actions=learn(eth_type=0x800,OXM_OF_IPV4_DST[])
  41 ]])
  42 AT_CHECK([ovs-ofctl parse-flows flows.txt], [0],
  43 [[usable protocols: any
  44 chosen protocol: OpenFlow10-table_id
  45 OFPT_FLOW_MOD (xid=0x1): ADD actions=learn(table=1,eth_type=0x800,load:0x5->NXM_OF_IP_DST[])
  46 OFPT_FLOW_MOD (xid=0x2): ADD ip actions=learn(table=1,load:NXM_OF_IP_DST[]->NXM_NX_REG1[])
  47 OFPT_FLOW_MOD (xid=0x3): ADD ip actions=learn(table=1,eth_type=0x800,NXM_OF_IP_DST[])
  48 ]])
  49 AT_CLEANUP
  50
  51 AT_SETUP([learning action - invalid prerequisites])
  52 AT_CHECK([[ovs-ofctl parse-flow 'actions=learn(load:5->NXM_OF_IP_DST[])']],
  53   [1], [],
  54   [[ovs-ofctl: load:5->NXM_OF_IP_DST[]: cannot specify destination field ip_dst because prerequisites are not satisfied
  55 ]])
  56 AT_CHECK([[ovs-ofctl parse-flow 'actions=learn(load:NXM_OF_IP_DST[]->NXM_NX_REG1[])']],
  57   [1], [],
  58   [[ovs-ofctl: load:NXM_OF_IP_DST[]->NXM_NX_REG1[]: cannot specify source field ip_dst because prerequisites are not satisfied
  59 ]])
  60 AT_CLEANUP
  61
  62 AT_SETUP([learning action - standard VLAN+MAC learning])
  63 OVS_VSWITCHD_START(
  64   [add-port br0 p1 -- set Interface p1 type=dummy ofport_request=1 -- \
  65    add-port br0 p2 -- set Interface p2 type=dummy ofport_request=2 -- \
  66    add-port br0 p3 -- set Interface p3 type=dummy ofport_request=3])
  67 # Set up flow table for VLAN+MAC learning.
  68 AT_DATA([flows.txt], [[
  69 table=0 actions=learn(table=1, hard_timeout=60, NXM_OF_VLAN_TCI[0..11], NXM_OF_ETH_DST[]=NXM_OF_ETH_SRC[], output:NXM_OF_IN_PORT[]), resubmit(,1)
  70 table=1 priority=0 actions=flood
  71 ]])
  72 AT_CHECK([ovs-ofctl add-flows br0 flows.txt])
  73
  74 # Trace an ARP packet arriving on port 3, to create a MAC learning entry.
  75 flow="in_port(3),eth(src=50:54:00:00:00:05,dst=ff:ff:ff:ff:ff:ff),eth_type(0x0806),arp(sip=192.168.0.1,tip=192.168.0.2,op=1,sha=50:54:00:00:00:05,tha=00:00:00:00:00:00)"
  76 AT_CHECK([ovs-appctl ofproto/trace br0 "$flow" -generate], [0], [stdout])
  77 actual=`tail -1 stdout | sed 's/Datapath actions: //'`
  78
  79 expected="1,2,100"
  80 AT_CHECK([ovs-dpctl normalize-actions "$flow" "$expected"], [0], [stdout])
  81 mv stdout expout
  82 AT_CHECK([ovs-dpctl normalize-actions "$flow" "$actual"], [0], [expout])
  83
  84 # Check for the MAC learning entry.
  85 AT_CHECK([ovs-ofctl dump-flows br0 table=1 | ofctl_strip | sort], [0], [dnl
  86  table=1, hard_timeout=60, vlan_tci=0x0000/0x0fff,dl_dst=50:54:00:00:00:05 actions=output:3
  87  table=1, priority=0 actions=FLOOD
  88 NXST_FLOW reply:
  89 ])
  90
  91 # Trace a packet arrival destined for the learned MAC.
  92 # (This will also learn a MAC.)
  93 AT_CHECK([ovs-appctl ofproto/trace br0 'in_port(1),eth(src=50:54:00:00:00:06,dst=50:54:00:00:00:05),eth_type(0x0806),arp(sip=192.168.0.2,tip=192.168.0.1,op=2,sha=50:54:00:00:00:06,tha=50:54:00:00:00:05)' -generate], [0], [stdout])
  94 AT_CHECK([tail -1 stdout], [0], [Datapath actions: 3
  95 ])
  96
  97 # Check for both MAC learning entries.
  98 AT_CHECK([ovs-ofctl dump-flows br0 table=1 | ofctl_strip |sort], [0], [dnl
  99  table=1, hard_timeout=60, vlan_tci=0x0000/0x0fff,dl_dst=50:54:00:00:00:05 actions=output:3
 100  table=1, hard_timeout=60, vlan_tci=0x0000/0x0fff,dl_dst=50:54:00:00:00:06 actions=output:1
 101  table=1, priority=0 actions=FLOOD
 102 NXST_FLOW reply:
 103 ])
 104
 105 # Trace a packet arrival that updates the first learned MAC entry.
 106 flow="in_port(2),eth(src=50:54:00:00:00:05,dst=ff:ff:ff:ff:ff:ff),eth_type(0x0806),arp(sip=192.168.0.1,tip=192.168.0.2,op=1,sha=50:54:00:00:00:05,tha=00:00:00:00:00:00)"
 107 AT_CHECK([ovs-appctl ofproto/trace br0 "$flow" -generate], [0], [stdout])
 108 actual=`tail -1 stdout | sed 's/Datapath actions: //'`
 109
 110 expected="1,3,100"
 111 AT_CHECK([ovs-dpctl normalize-actions "$flow" "$expected"], [0], [stdout])
 112 mv stdout expout
 113 AT_CHECK([ovs-dpctl normalize-actions "$flow" "$actual"], [0], [expout])
 114
 115 # Check that the MAC learning entry was updated.
 116 AT_CHECK([ovs-ofctl dump-flows br0 table=1 | ofctl_strip | sort], [0], [dnl
 117  table=1, hard_timeout=60, vlan_tci=0x0000/0x0fff,dl_dst=50:54:00:00:00:05 actions=output:2
 118  table=1, hard_timeout=60, vlan_tci=0x0000/0x0fff,dl_dst=50:54:00:00:00:06 actions=output:1
 119  table=1, priority=0 actions=FLOOD
 120 NXST_FLOW reply:
 121 ])
 122 OVS_VSWITCHD_STOP
 123 AT_CLEANUP
 124
 125 AT_SETUP([learning action - TCPv4 port learning])
 126 OVS_VSWITCHD_START(
 127   [add-port br0 p1 -- set Interface p1 type=dummy -- \
 128    add-port br0 p2 -- set Interface p2 type=dummy -- \
 129    add-port br0 p3 -- set Interface p3 type=dummy])
 130 # Set up flow table for TCPv4 port learning.
 131 AT_CHECK([[ovs-ofctl add-flow br0 'table=0 tcp actions=learn(table=1, hard_timeout=60, eth_type=0x800, nw_proto=6, NXM_OF_IP_SRC[]=NXM_OF_IP_DST[], NXM_OF_IP_DST[]=NXM_OF_IP_SRC[], NXM_OF_TCP_SRC[]=NXM_OF_TCP_DST[], NXM_OF_TCP_DST[]=NXM_OF_TCP_SRC[]), flood']])
 132
 133 # Trace a TCPv4 packet arriving on port 3.
 134 flow="in_port(3),eth(src=50:54:00:00:00:05,dst=50:54:00:00:00:06),eth_type(0x0800),ipv4(src=192.168.0.2,dst=192.168.0.1,proto=6,tos=0,ttl=64,frag=no),tcp(src=40000,dst=80)"
 135 AT_CHECK([ovs-appctl ofproto/trace br0 "$flow" -generate], [0], [stdout])
 136 actual=`tail -1 stdout | sed 's/Datapath actions: //'`
 137
 138 expected="1,2,100"
 139 AT_CHECK([ovs-dpctl normalize-actions "$flow" "$expected"], [0], [stdout])
 140 mv stdout expout
 141 AT_CHECK([ovs-dpctl normalize-actions "$flow" "$actual"], [0], [expout])
 142
 143 # Check for the learning entry.
 144 AT_CHECK([ovs-ofctl dump-flows br0 table=1 | ofctl_strip | sort], [0], [dnl
 145  table=1, hard_timeout=60, tcp,nw_src=192.168.0.1,nw_dst=192.168.0.2,tp_src=80,tp_dst=40000 actions=drop
 146 NXST_FLOW reply:
 147 ])
 148 OVS_VSWITCHD_STOP
 149 AT_CLEANUP
 150
 151 AT_SETUP([learning action - TCPv6 port learning])
 152 OVS_VSWITCHD_START(
 153   [add-port br0 p1 -- set Interface p1 type=dummy -- \
 154    add-port br0 p2 -- set Interface p2 type=dummy -- \
 155    add-port br0 p3 -- set Interface p3 type=dummy])
 156 # Set up flow table for TCPv6 port learning.
 157 # Also add a 128-bit-wide "load" action and a 128-bit literal match to check
 158 # that they work.
 159 AT_CHECK([[ovs-ofctl add-flow br0 'table=0 tcp6 actions=learn(table=1, hard_timeout=60, eth_type=0x86dd, nw_proto=6, NXM_NX_IPV6_SRC[]=NXM_NX_IPV6_DST[], ipv6_dst=2001:0db8:85a3:0000:0000:8a2e:0370:7334, NXM_OF_TCP_SRC[]=NXM_OF_TCP_DST[], NXM_OF_TCP_DST[]=NXM_OF_TCP_SRC[], load(0x20010db885a308d313198a2e03707348->NXM_NX_IPV6_DST[])), flood']])
 160
 161 # Trace a TCPv6 packet arriving on port 3.
 162 flow="in_port(3),eth(src=50:54:00:00:00:05,dst=50:54:00:00:00:06),eth_type(0x86dd),ipv6(src=fec0::2,dst=fec0::1,label=0,proto=6,tclass=0,hlimit=255,frag=no),tcp(src=40000,dst=80)"
 163 AT_CHECK([ovs-appctl ofproto/trace br0 "$flow" -generate], [0], [stdout])
 164 actual=`tail -1 stdout | sed 's/Datapath actions: //'`
 165
 166 expected="1,2,100"
 167 AT_CHECK([ovs-dpctl normalize-actions "$flow" "$expected"], [0], [stdout])
 168 mv stdout expout
 169 AT_CHECK([ovs-dpctl normalize-actions "$flow" "$actual"], [0], [expout])
 170
 171 # Check for the learning entry.
 172 AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
 173  table=1, hard_timeout=60, tcp6,ipv6_src=fec0::1,ipv6_dst=2001:db8:85a3::8a2e:370:7334,tp_src=80,tp_dst=40000 actions=load:0x13198a2e03707348->NXM_NX_IPV6_DST[[0..63]],load:0x20010db885a308d3->NXM_NX_IPV6_DST[[64..127]]
 174  tcp6 actions=learn(table=1,hard_timeout=60,eth_type=0x86dd,nw_proto=6,NXM_NX_IPV6_SRC[[]]=NXM_NX_IPV6_DST[[]],ipv6_dst=2001:db8:85a3::8a2e:370:7334,NXM_OF_TCP_SRC[[]]=NXM_OF_TCP_DST[[]],NXM_OF_TCP_DST[[]]=NXM_OF_TCP_SRC[[]],load:0x20010db885a308d313198a2e03707348->NXM_NX_IPV6_DST[[]]),FLOOD
 175 NXST_FLOW reply:
 176 ])
 177 OVS_VSWITCHD_STOP
 178 AT_CLEANUP
 179
 180 AT_SETUP([learning action - fin_timeout feature])
 181 # This is a totally artificial use of the "learn" action.  The only purpose
 182 # is to check that specifying fin_idle_timeout or fin_hard_timeout causes
 183 # a corresponding fin_timeout action to end up in the learned flows.
 184 OVS_VSWITCHD_START(
 185     [add-port br0 p1 -- set Interface p1 type=dummy ofport_request=1])
 186 AT_CHECK([[ovs-ofctl add-flow br0 'actions=learn(fin_hard_timeout=10, fin_idle_timeout=5, NXM_OF_ETH_DST[]=NXM_OF_ETH_SRC[], output:NXM_OF_IN_PORT[])']])
 187 AT_CHECK([ovs-appctl ofproto/trace br0 'in_port(1),eth(src=50:54:00:00:00:05,dst=ff:ff:ff:ff:ff:ff),eth_type(0x0806),arp(sip=192.168.0.1,tip=192.168.0.2,op=1,sha=50:54:00:00:00:05,tha=00:00:00:00:00:00)' -generate], [0], [ignore])
 188 AT_CHECK([ovs-ofctl dump-flows br0 table=1 | ofctl_strip], [0],
 189 [NXST_FLOW reply:
 190  table=1, dl_dst=50:54:00:00:00:05 actions=fin_timeout(idle_timeout=5,hard_timeout=10),output:1
 191 ])
 192 OVS_VSWITCHD_STOP
 193 AT_CLEANUP