Global replace of Nicira Networks.
[sliver-openvswitch.git] / include / openflow / openflow.h
index 1d70aab..b2516c0 100644 (file)
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2008, 2009 Nicira Networks.
+ * Copyright (c) 2008, 2009, 2010, 2011, 2012 Nicira, Inc.
  *
  * Licensed under the Apache License, Version 2.0 (the "License");
  * you may not use this file except in compliance with the License.
  * limitations under the License.
  */
 
-/* OpenFlow: protocol between controller and datapath. */
-
 #ifndef OPENFLOW_OPENFLOW_H
 #define OPENFLOW_OPENFLOW_H 1
 
-#ifdef __KERNEL__
-#include <linux/types.h>
-#else
-#include <stdint.h>
-#endif
-
-#ifdef SWIG
-#define OFP_ASSERT(EXPR)        /* SWIG can't handle OFP_ASSERT. */
-#elif !defined(__cplusplus)
-/* Build-time assertion for use in a declaration context. */
-#define OFP_ASSERT(EXPR)                                                \
-        extern int (*build_assert(void))[ sizeof(struct {               \
-                    unsigned int build_assert_failed : (EXPR) ? 1 : -1; })]
-#else /* __cplusplus */
-#include <boost/static_assert.hpp>
-#define OFP_ASSERT BOOST_STATIC_ASSERT
-#endif /* __cplusplus */
-
-#ifndef SWIG
-#define OFP_PACKED __attribute__((packed))
-#else
-#define OFP_PACKED              /* SWIG doesn't understand __attribute. */
-#endif
-
-/* The most significant bit being set in the version field indicates an
- * experimental OpenFlow version.  
- */
-#define OFP_VERSION   0x97
-
-#define OFP_MAX_TABLE_NAME_LEN 32
-#define OFP_MAX_PORT_NAME_LEN  16
-
-#define OFP_TCP_PORT  6633
-#define OFP_SSL_PORT  6633
-
-#define OFP_ETH_ALEN 6          /* Bytes in an Ethernet address. */
-
-/* Port numbering.  Physical ports are numbered starting from 0. */
-enum ofp_port {
-    /* Maximum number of physical switch ports. */
-    OFPP_MAX = 0xff00,
-
-    /* Fake output "ports". */
-    OFPP_IN_PORT    = 0xfff8,  /* Send the packet out the input port.  This 
-                                  virtual port must be explicitly used 
-                                  in order to send back out of the input 
-                                  port. */
-    OFPP_TABLE      = 0xfff9,  /* Perform actions in flow table.  
-                                  NB: This can only be the destination
-                                  port for packet-out messages. */
-    OFPP_NORMAL     = 0xfffa,  /* Process with normal L2/L3 switching. */
-    OFPP_FLOOD      = 0xfffb,  /* All physical ports except input port and 
-                                  those disabled by STP. */
-    OFPP_ALL        = 0xfffc,  /* All physical ports except input port. */
-    OFPP_CONTROLLER = 0xfffd,  /* Send to controller. */ 
-    OFPP_LOCAL      = 0xfffe,  /* Local openflow "port". */
-    OFPP_NONE       = 0xffff   /* Not associated with a physical port. */
-};
-
-enum ofp_type {
-    /* Immutable messages. */
-    OFPT_HELLO,               /* Symmetric message */
-    OFPT_ERROR,               /* Symmetric message */
-    OFPT_ECHO_REQUEST,        /* Symmetric message */
-    OFPT_ECHO_REPLY,          /* Symmetric message */
-    OFPT_VENDOR,              /* Symmetric message */
-
-    /* Switch configuration messages. */
-    OFPT_FEATURES_REQUEST,    /* Controller/switch message */
-    OFPT_FEATURES_REPLY,      /* Controller/switch message */
-    OFPT_GET_CONFIG_REQUEST,  /* Controller/switch message */
-    OFPT_GET_CONFIG_REPLY,    /* Controller/switch message */
-    OFPT_SET_CONFIG,          /* Controller/switch message */
-
-    /* Asynchronous messages. */
-    OFPT_PACKET_IN,           /* Async message */
-    OFPT_FLOW_EXPIRED,        /* Async message */
-    OFPT_PORT_STATUS,         /* Async message */
-
-    /* Controller command messages. */
-    OFPT_PACKET_OUT,          /* Controller/switch message */
-    OFPT_FLOW_MOD,            /* Controller/switch message */
-    OFPT_PORT_MOD,            /* Controller/switch message */
-
-    /* Statistics messages. */
-    OFPT_STATS_REQUEST,       /* Controller/switch message */
-    OFPT_STATS_REPLY          /* Controller/switch message */
-};
-
-/* Header on all OpenFlow packets. */
-struct ofp_header {
-    uint8_t version;    /* OFP_VERSION. */
-    uint8_t type;       /* One of the OFPT_ constants. */
-    uint16_t length;    /* Length including this ofp_header. */
-    uint32_t xid;       /* Transaction id associated with this packet.
-                           Replies use the same id as was in the request
-                           to facilitate pairing. */
-};
-OFP_ASSERT(sizeof(struct ofp_header) == 8);
-
-/* OFPT_HELLO.  This message has an empty body, but implementations must
- * ignore any data included in the body, to allow for future extensions. */
-struct ofp_hello {
-    struct ofp_header header;
-};
-
-#define OFP_DEFAULT_MISS_SEND_LEN   128
-
-enum ofp_config_flags {
-    /* Tells datapath to notify the controller of expired flow entries. */
-    OFPC_SEND_FLOW_EXP = 1 << 0,
-
-    /* Handling of IP fragments. */
-    OFPC_FRAG_NORMAL   = 0 << 1,  /* No special handling for fragments. */
-    OFPC_FRAG_DROP     = 1 << 1,  /* Drop fragments. */
-    OFPC_FRAG_REASM    = 2 << 1,  /* Reassemble (only if OFPC_IP_REASM set). */
-    OFPC_FRAG_MASK     = 3 << 1
-};
-
-/* Switch configuration. */
-struct ofp_switch_config {
-    struct ofp_header header;
-    uint16_t flags;             /* OFPC_* flags. */
-    uint16_t miss_send_len;     /* Max bytes of new flow that datapath should
-                                   send to the controller. */
-};
-OFP_ASSERT(sizeof(struct ofp_switch_config) == 12);
-
-/* Capabilities supported by the datapath. */
-enum ofp_capabilities {
-    OFPC_FLOW_STATS     = 1 << 0,  /* Flow statistics. */
-    OFPC_TABLE_STATS    = 1 << 1,  /* Table statistics. */
-    OFPC_PORT_STATS     = 1 << 2,  /* Port statistics. */
-    OFPC_STP            = 1 << 3,  /* 802.1d spanning tree. */
-    OFPC_MULTI_PHY_TX   = 1 << 4,  /* Supports transmitting through multiple
-                                      physical interfaces */
-    OFPC_IP_REASM       = 1 << 5   /* Can reassemble IP fragments. */
-};
-
-/* Flags to indicate behavior of the physical port.  These flags are
- * used in ofp_phy_port to describe the current configuration.  They are
- * used in the ofp_port_mod message to configure the port's behavior. 
- */
-enum ofp_port_config {
-    OFPPC_PORT_DOWN    = 1 << 0,  /* Port is administratively down. */
-
-    OFPPC_NO_STP       = 1 << 1,  /* Disable 802.1D spanning tree on port. */
-    OFPPC_NO_RECV      = 1 << 2,  /* Drop most packets received on port. */
-    OFPPC_NO_RECV_STP  = 1 << 3,  /* Drop received 802.1D STP packets. */
-    OFPPC_NO_FLOOD     = 1 << 4,  /* Do not include this port when flooding. */
-    OFPPC_NO_FWD       = 1 << 5,  /* Drop packets forwarded to port. */
-    OFPPC_NO_PACKET_IN = 1 << 6   /* Do not send packet-in msgs for port. */
-};
-
-/* Current state of the physical port.  These are not configurable from
- * the controller.
- */
-enum ofp_port_state {
-    OFPPS_LINK_DOWN   = 1 << 0, /* No physical link present. */
-
-    /* The OFPPS_STP_* bits have no effect on switch operation.  The
-     * controller must adjust OFPPC_NO_RECV, OFPPC_NO_FWD, and
-     * OFPPC_NO_PACKET_IN appropriately to fully implement an 802.1D spanning
-     * tree. */
-    OFPPS_STP_LISTEN  = 0 << 8, /* Not learning or relaying frames. */
-    OFPPS_STP_LEARN   = 1 << 8, /* Learning but not relaying frames. */
-    OFPPS_STP_FORWARD = 2 << 8, /* Learning and relaying frames. */
-    OFPPS_STP_BLOCK   = 3 << 8, /* Not part of spanning tree. */
-    OFPPS_STP_MASK    = 3 << 8  /* Bit mask for OFPPS_STP_* values. */
-};
-
-/* Features of physical ports available in a datapath. */
-enum ofp_port_features {
-    OFPPF_10MB_HD    = 1 << 0,  /* 10 Mb half-duplex rate support. */
-    OFPPF_10MB_FD    = 1 << 1,  /* 10 Mb full-duplex rate support. */
-    OFPPF_100MB_HD   = 1 << 2,  /* 100 Mb half-duplex rate support. */
-    OFPPF_100MB_FD   = 1 << 3,  /* 100 Mb full-duplex rate support. */
-    OFPPF_1GB_HD     = 1 << 4,  /* 1 Gb half-duplex rate support. */
-    OFPPF_1GB_FD     = 1 << 5,  /* 1 Gb full-duplex rate support. */
-    OFPPF_10GB_FD    = 1 << 6,  /* 10 Gb full-duplex rate support. */
-    OFPPF_COPPER     = 1 << 7,  /* Copper medium. */
-    OFPPF_FIBER      = 1 << 8,  /* Fiber medium. */
-    OFPPF_AUTONEG    = 1 << 9,  /* Auto-negotiation. */
-    OFPPF_PAUSE      = 1 << 10, /* Pause. */
-    OFPPF_PAUSE_ASYM = 1 << 11  /* Asymmetric pause. */
-};
-
-/* Description of a physical port */
-struct ofp_phy_port {
-    uint16_t port_no;
-    uint8_t hw_addr[OFP_ETH_ALEN];
-    uint8_t name[OFP_MAX_PORT_NAME_LEN]; /* Null-terminated */
-
-    uint32_t config;        /* Bitmap of OFPPC_* flags. */
-    uint32_t state;         /* Bitmap of OFPPS_* flags. */
-
-    /* Bitmaps of OFPPF_* that describe features.  All bits zeroed if
-     * unsupported or unavailable. */
-    uint32_t curr;          /* Current features. */
-    uint32_t advertised;    /* Features being advertised by the port. */
-    uint32_t supported;     /* Features supported by the port. */
-    uint32_t peer;          /* Features advertised by peer. */
-};
-OFP_ASSERT(sizeof(struct ofp_phy_port) == 48);
-
-/* Switch features. */
-struct ofp_switch_features {
-    struct ofp_header header;
-    uint64_t datapath_id;   /* Datapath unique ID.  Only the lower 48-bits
-                               are meaningful. */
-
-    uint32_t n_buffers;     /* Max packets buffered at once. */
-
-    uint8_t n_tables;       /* Number of tables supported by datapath. */
-    uint8_t pad[3];         /* Align to 64-bits. */
-
-    /* Features. */
-    uint32_t capabilities;  /* Bitmap of support "ofp_capabilities". */
-    uint32_t actions;       /* Bitmap of supported "ofp_action_type"s. */
-
-    /* Port info.*/
-    struct ofp_phy_port ports[0];  /* Port definitions.  The number of ports
-                                      is inferred from the length field in
-                                      the header. */
-};
-OFP_ASSERT(sizeof(struct ofp_switch_features) == 32);
-
-/* What changed about the physical port */
-enum ofp_port_reason {
-    OFPPR_ADD,              /* The port was added. */
-    OFPPR_DELETE,           /* The port was removed. */
-    OFPPR_MODIFY            /* Some attribute of the port has changed. */
-};
-
-/* A physical port has changed in the datapath */
-struct ofp_port_status {
-    struct ofp_header header;
-    uint8_t reason;          /* One of OFPPR_*. */
-    uint8_t pad[7];          /* Align to 64-bits. */
-    struct ofp_phy_port desc;
-};
-OFP_ASSERT(sizeof(struct ofp_port_status) == 64);
-
-/* Modify behavior of the physical port */
-struct ofp_port_mod {
-    struct ofp_header header;
-    uint16_t port_no;
-    uint8_t hw_addr[OFP_ETH_ALEN]; /* The hardware address is not 
-                                      configurable.  This is used to 
-                                      sanity-check the request, so it must 
-                                      be the same as returned in an
-                                      ofp_phy_port struct. */
-
-    uint32_t config;        /* Bitmap of OFPPC_* flags. */
-    uint32_t mask;          /* Bitmap of OFPPC_* flags to be changed. */
-
-    uint32_t advertise;     /* Bitmap of "ofp_port_features"s.  Zero all 
-                               bits to prevent any action taking place. */
-    uint8_t pad[4];         /* Pad to 64-bits. */
-};
-OFP_ASSERT(sizeof(struct ofp_port_mod) == 32);
-
-/* Why is this packet being sent to the controller? */
-enum ofp_packet_in_reason {
-    OFPR_NO_MATCH,          /* No matching flow. */
-    OFPR_ACTION             /* Action explicitly output to controller. */
-};
-
-/* Packet received on port (datapath -> controller). */
-struct ofp_packet_in {
-    struct ofp_header header;
-    uint32_t buffer_id;     /* ID assigned by datapath. */
-    uint16_t total_len;     /* Full length of frame. */
-    uint16_t in_port;       /* Port on which frame was received. */
-    uint8_t reason;         /* Reason packet is being sent (one of OFPR_*) */
-    uint8_t pad;
-    uint8_t data[0];        /* Ethernet frame, halfway through 32-bit word,
-                               so the IP header is 32-bit aligned.  The 
-                               amount of data is inferred from the length
-                               field in the header.  Because of padding,
-                               offsetof(struct ofp_packet_in, data) ==
-                               sizeof(struct ofp_packet_in) - 2. */
-};
-OFP_ASSERT(sizeof(struct ofp_packet_in) == 20);
-
-enum ofp_action_type {
-    OFPAT_OUTPUT,           /* Output to switch port. */
-    OFPAT_SET_VLAN_VID,     /* Set the 802.1q VLAN id. */
-    OFPAT_SET_VLAN_PCP,     /* Set the 802.1q priority. */
-    OFPAT_STRIP_VLAN,       /* Strip the 802.1q header. */
-    OFPAT_SET_DL_SRC,       /* Ethernet source address. */
-    OFPAT_SET_DL_DST,       /* Ethernet destination address. */
-    OFPAT_SET_NW_SRC,       /* IP source address. */
-    OFPAT_SET_NW_DST,       /* IP destination address. */
-    OFPAT_SET_TP_SRC,       /* TCP/UDP source port. */
-    OFPAT_SET_TP_DST,       /* TCP/UDP destination port. */
-    OFPAT_VENDOR = 0xffff
-};
-
-/* Action structure for OFPAT_OUTPUT, which sends packets out 'port'.  
- * When the 'port' is the OFPP_CONTROLLER, 'max_len' indicates the max 
- * number of bytes to send.  A 'max_len' of zero means no bytes of the
- * packet should be sent. */
-struct ofp_action_output {
-    uint16_t type;                  /* OFPAT_OUTPUT. */
-    uint16_t len;                   /* Length is 8. */
-    uint16_t port;                  /* Output port. */
-    uint16_t max_len;               /* Max length to send to controller. */
-};
-OFP_ASSERT(sizeof(struct ofp_action_output) == 8);
-
-/* The VLAN id is 12 bits, so we can use the entire 16 bits to indicate
- * special conditions.  All ones is used to match that no VLAN id was
- * set. */
-#define OFP_VLAN_NONE      0xffff
-
-/* Action structure for OFPAT_SET_VLAN_VID. */
-struct ofp_action_vlan_vid {
-    uint16_t type;                  /* OFPAT_SET_VLAN_VID. */
-    uint16_t len;                   /* Length is 8. */
-    uint16_t vlan_vid;              /* VLAN id. */
-    uint8_t pad[2];
-};
-OFP_ASSERT(sizeof(struct ofp_action_vlan_vid) == 8);
-
-/* Action structure for OFPAT_SET_VLAN_PCP. */
-struct ofp_action_vlan_pcp {
-    uint16_t type;                  /* OFPAT_SET_VLAN_PCP. */
-    uint16_t len;                   /* Length is 8. */
-    uint8_t vlan_pcp;               /* VLAN priority. */
-    uint8_t pad[3];
-};
-OFP_ASSERT(sizeof(struct ofp_action_vlan_vid) == 8);
-
-/* Action structure for OFPAT_SET_DL_SRC/DST. */
-struct ofp_action_dl_addr {
-    uint16_t type;                  /* OFPAT_SET_DL_SRC/DST. */
-    uint16_t len;                   /* Length is 16. */
-    uint8_t dl_addr[OFP_ETH_ALEN];  /* Ethernet address. */
-    uint8_t pad[6];
-};
-OFP_ASSERT(sizeof(struct ofp_action_dl_addr) == 16);
-
-/* Action structure for OFPAT_SET_NW_SRC/DST. */
-struct ofp_action_nw_addr {
-    uint16_t type;                  /* OFPAT_SET_TW_SRC/DST. */
-    uint16_t len;                   /* Length is 8. */
-    uint32_t nw_addr;               /* IP address. */
-};
-OFP_ASSERT(sizeof(struct ofp_action_nw_addr) == 8);
-
-/* Action structure for OFPAT_SET_TP_SRC/DST. */
-struct ofp_action_tp_port {
-    uint16_t type;                  /* OFPAT_SET_TP_SRC/DST. */
-    uint16_t len;                   /* Length is 8. */
-    uint16_t tp_port;               /* TCP/UDP port. */
-    uint8_t pad[2];
-};
-OFP_ASSERT(sizeof(struct ofp_action_tp_port) == 8);
-
-/* Action header for OFPAT_VENDOR. The rest of the body is vendor-defined. */
-struct ofp_action_vendor_header {
-    uint16_t type;                  /* OFPAT_VENDOR. */
-    uint16_t len;                   /* Length is a multiple of 8. */
-    uint32_t vendor;                /* Vendor ID, which takes the same form 
-                                       as in "struct ofp_vendor_header". */ 
-};
-OFP_ASSERT(sizeof(struct ofp_action_vendor_header) == 8);
-
-/* Action header that is common to all actions.  The length includes the 
- * header and any padding used to make the action 64-bit aligned.  
- * NB: The length of an action *must* always be a multiple of eight. */
-struct ofp_action_header {
-    uint16_t type;                  /* One of OFPAT_*. */
-    uint16_t len;                   /* Length of action, including this 
-                                       header.  This is the length of action, 
-                                       including any padding to make it 
-                                       64-bit aligned. */
-    uint8_t pad[4];
-};
-OFP_ASSERT(sizeof(struct ofp_action_header) == 8);
-
-union ofp_action {
-    uint16_t type;
-    struct ofp_action_header header;
-    struct ofp_action_vendor_header vendor;
-    struct ofp_action_output output;
-    struct ofp_action_vlan_vid vlan_vid;
-    struct ofp_action_vlan_pcp vlan_pcp;
-    struct ofp_action_nw_addr nw_addr;
-    struct ofp_action_tp_port tp_port;
-};
-OFP_ASSERT(sizeof(union ofp_action) == 8);
-
-/* Send packet (controller -> datapath). */
-struct ofp_packet_out {
-    struct ofp_header header;
-    uint32_t buffer_id;           /* ID assigned by datapath (-1 if none). */
-    uint16_t in_port;             /* Packet's input port (OFPP_NONE if none). */
-    uint16_t actions_len;         /* Size of action array in bytes. */
-    struct ofp_action_header actions[0]; /* Actions. */
-    /* uint8_t data[0]; */        /* Packet data.  The length is inferred 
-                                     from the length field in the header.  
-                                     (Only meaningful if buffer_id == -1.) */
-};
-OFP_ASSERT(sizeof(struct ofp_packet_out) == 16);
-
-enum ofp_flow_mod_command {
-    OFPFC_ADD,              /* New flow. */
-    OFPFC_MODIFY,           /* Modify all matching flows. */
-    OFPFC_MODIFY_STRICT,    /* Modify entry strictly matching wildcards */
-    OFPFC_DELETE,           /* Delete all matching flows. */
-    OFPFC_DELETE_STRICT     /* Strictly match wildcards and priority. */
-};
-
-/* Flow wildcards. */
-enum ofp_flow_wildcards {
-    OFPFW_IN_PORT  = 1 << 0,  /* Switch input port. */
-    OFPFW_DL_VLAN  = 1 << 1,  /* VLAN. */
-    OFPFW_DL_SRC   = 1 << 2,  /* Ethernet source address. */
-    OFPFW_DL_DST   = 1 << 3,  /* Ethernet destination address. */
-    OFPFW_DL_TYPE  = 1 << 4,  /* Ethernet frame type. */
-    OFPFW_NW_PROTO = 1 << 5,  /* IP protocol. */
-    OFPFW_TP_SRC   = 1 << 6,  /* TCP/UDP source port. */
-    OFPFW_TP_DST   = 1 << 7,  /* TCP/UDP destination port. */
-
-    /* IP source address wildcard bit count.  0 is exact match, 1 ignores the
-     * LSB, 2 ignores the 2 least-significant bits, ..., 32 and higher wildcard
-     * the entire field.  This is the *opposite* of the usual convention where
-     * e.g. /24 indicates that 8 bits (not 24 bits) are wildcarded. */
-    OFPFW_NW_SRC_SHIFT = 8,
-    OFPFW_NW_SRC_BITS = 6,
-    OFPFW_NW_SRC_MASK = ((1 << OFPFW_NW_SRC_BITS) - 1) << OFPFW_NW_SRC_SHIFT,
-    OFPFW_NW_SRC_ALL = 32 << OFPFW_NW_SRC_SHIFT,
-
-    /* IP destination address wildcard bit count.  Same format as source. */
-    OFPFW_NW_DST_SHIFT = 14,
-    OFPFW_NW_DST_BITS = 6,
-    OFPFW_NW_DST_MASK = ((1 << OFPFW_NW_DST_BITS) - 1) << OFPFW_NW_DST_SHIFT,
-    OFPFW_NW_DST_ALL = 32 << OFPFW_NW_DST_SHIFT,
-
-    /* Wildcard all fields. */
-    OFPFW_ALL = ((1 << 20) - 1)
-};
-
-/* The wildcards for ICMP type and code fields use the transport source 
- * and destination port fields, respectively. */
-#define OFPFW_ICMP_TYPE OFPFW_TP_SRC
-#define OFPFW_ICMP_CODE OFPFW_TP_DST
-
-/* Values below this cutoff are 802.3 packets and the two bytes
- * following MAC addresses are used as a frame length.  Otherwise, the
- * two bytes are used as the Ethernet type.
- */
-#define OFP_DL_TYPE_ETH2_CUTOFF   0x0600
-
-/* Value of dl_type to indicate that the frame does not include an
- * Ethernet type.
- */
-#define OFP_DL_TYPE_NOT_ETH_TYPE  0x05ff
-
-/* The VLAN id is 12-bits, so we can use the entire 16 bits to indicate
- * special conditions.  All ones indicates that no VLAN id was set.
- */
-#define OFP_VLAN_NONE      0xffff
-
-/* Fields to match against flows */
-struct ofp_match {
-    uint32_t wildcards;        /* Wildcard fields. */
-    uint16_t in_port;          /* Input switch port. */
-    uint8_t dl_src[OFP_ETH_ALEN]; /* Ethernet source address. */
-    uint8_t dl_dst[OFP_ETH_ALEN]; /* Ethernet destination address. */
-    uint16_t dl_vlan;          /* Input VLAN. */
-    uint16_t dl_type;          /* Ethernet frame type. */
-    uint8_t nw_proto;          /* IP protocol. */
-    uint8_t pad;               /* Align to 32-bits. */
-    uint32_t nw_src;           /* IP source address. */
-    uint32_t nw_dst;           /* IP destination address. */
-    uint16_t tp_src;           /* TCP/UDP source port. */
-    uint16_t tp_dst;           /* TCP/UDP destination port. */
-};
-OFP_ASSERT(sizeof(struct ofp_match) == 36);
-
-/* The match fields for ICMP type and code use the transport source and 
- * destination port fields, respectively. */
-#define icmp_type tp_src
-#define icmp_code tp_dst
-
-/* Value used in "idle_timeout" and "hard_timeout" to indicate that the entry
- * is permanent. */
-#define OFP_FLOW_PERMANENT 0
-
-/* By default, choose a priority in the middle. */
-#define OFP_DEFAULT_PRIORITY 0x8000
-
-/* Flow setup and teardown (controller -> datapath). */
-struct ofp_flow_mod {
-    struct ofp_header header;
-    struct ofp_match match;      /* Fields to match */
-
-    /* Flow actions. */
-    uint16_t command;             /* One of OFPFC_*. */
-    uint16_t idle_timeout;        /* Idle time before discarding (seconds). */
-    uint16_t hard_timeout;        /* Max time before discarding (seconds). */
-    uint16_t priority;            /* Priority level of flow entry. */
-    uint32_t buffer_id;           /* Buffered packet to apply to (or -1). 
-                                     Not meaningful for OFPFC_DELETE*. */
-    uint16_t out_port;            /* For OFPFC_DELETE* commands, require 
-                                     matching entries to include this as an 
-                                     output port.  A value of OFPP_NONE 
-                                     indicates no restriction. */
-    uint8_t pad[2];               /* Align to 32-bits. */
-    uint32_t reserved;            /* Reserved for future use. */
-    struct ofp_action_header actions[0]; /* The action length is inferred 
-                                            from the length field in the 
-                                            header. */
-};
-OFP_ASSERT(sizeof(struct ofp_flow_mod) == 64);
-
-/* Why did this flow expire? */
-enum ofp_flow_expired_reason {
-    OFPER_IDLE_TIMEOUT,         /* Flow idle time exceeded idle_timeout. */
-    OFPER_HARD_TIMEOUT          /* Time exceeded hard_timeout. */
-};
-
-/* Flow expiration (datapath -> controller). */
-struct ofp_flow_expired {
-    struct ofp_header header;
-    struct ofp_match match;   /* Description of fields. */
-
-    uint16_t priority;        /* Priority level of flow entry. */
-    uint8_t reason;           /* One of OFPER_*. */
-    uint8_t pad[1];           /* Align to 32-bits. */
-
-    uint32_t duration;        /* Time flow was alive in seconds. */
-    uint8_t pad2[4];          /* Align to 64-bits. */
-    uint64_t packet_count;    
-    uint64_t byte_count;
-};
-OFP_ASSERT(sizeof(struct ofp_flow_expired) == 72);
-
-/* Values for 'type' in ofp_error_message.  These values are immutable: they
- * will not change in future versions of the protocol (although new values may
- * be added). */
-enum ofp_error_type {
-    OFPET_HELLO_FAILED,         /* Hello protocol failed. */
-    OFPET_BAD_REQUEST,          /* Request was not understood. */
-    OFPET_BAD_ACTION,           /* Error in action description. */
-    OFPET_FLOW_MOD_FAILED,      /* Problem modifying flow entry. */
-    OFPET_PORT_MOD_FAILED       /* OFPT_PORT_MOD failed. */
-};
-
-/* ofp_error_msg 'code' values for OFPET_HELLO_FAILED.  'data' contains an
- * ASCII text string that may give failure details. */
-enum ofp_hello_failed_code {
-    OFPHFC_INCOMPATIBLE         /* No compatible version. */
-};
-
-/* ofp_error_msg 'code' values for OFPET_BAD_REQUEST.  'data' contains at least
- * the first 64 bytes of the failed request. */
-enum ofp_bad_request_code {
-    OFPBRC_BAD_VERSION,         /* ofp_header.version not supported. */
-    OFPBRC_BAD_TYPE,            /* ofp_header.type not supported. */
-    OFPBRC_BAD_STAT,            /* ofp_stats_request.type not supported. */
-    OFPBRC_BAD_VENDOR,          /* Vendor not supported (in ofp_vendor_header 
-                                 * or ofp_stats_request or ofp_stats_reply). */
-    OFPBRC_BAD_SUBTYPE,         /* Vendor subtype not supported. */
-    OFPBRC_BAD_LENGTH,          /* Wrong request length for type. */
-    OFPBRC_BUFFER_EMPTY,        /* Specified buffer has already been used. */
-    OFPBRC_BAD_COOKIE           /* Specified buffer does not exist. */
-};
-
-/* ofp_error_msg 'code' values for OFPET_BAD_ACTION.  'data' contains at least 
- * the first 64 bytes of the failed request. */
-enum ofp_bad_action_code {
-    OFPBAC_BAD_TYPE,           /* Unknown action type. */
-    OFPBAC_BAD_LEN,            /* Length problem in actions. */
-    OFPBAC_BAD_VENDOR,         /* Unknown vendor id specified. */
-    OFPBAC_BAD_VENDOR_TYPE,    /* Unknown action type for vendor id. */
-    OFPBAC_BAD_OUT_PORT,       /* Problem validating output action. */
-    OFPBAC_BAD_ARGUMENT,       /* Bad action argument. */
-    OFPBAC_TOO_MANY            /* Can't handle this many actions. */
-};
-
-/* ofp_error_msg 'code' values for OFPET_FLOW_MOD_FAILED.  'data' contains 
- * at least the first 64 bytes of the failed request. */
-enum ofp_flow_mod_failed_code {
-    OFPFMFC_ALL_TABLES_FULL,    /* Flow not added because of full tables. */
-    OFPFMFC_BAD_COMMAND         /* Unknown command. */
-};
-
-/* ofp_error_msg 'code' values for OFPET_PORT_MOD_FAILED.  'data' contains
- * at least the first 64 bytes of the failed request. */
-enum ofp_port_mod_failed_code {
-    OFPPMFC_BAD_PORT,            /* Specified port does not exist. */
-    OFPPMFC_BAD_HW_ADDR,         /* Specified hardware address is wrong. */
-};
-
-/* OFPT_ERROR: Error message (datapath -> controller). */
-struct ofp_error_msg {
-    struct ofp_header header;
-
-    uint16_t type;
-    uint16_t code;
-    uint8_t data[0];          /* Variable-length data.  Interpreted based 
-                                 on the type and code. */
-};
-OFP_ASSERT(sizeof(struct ofp_error_msg) == 12);
-
-enum ofp_stats_types {
-    /* Description of this OpenFlow switch. 
-     * The request body is empty.
-     * The reply body is struct ofp_desc_stats. */
-    OFPST_DESC,
-
-    /* Individual flow statistics.
-     * The request body is struct ofp_flow_stats_request.
-     * The reply body is an array of struct ofp_flow_stats. */
-    OFPST_FLOW,
-
-    /* Aggregate flow statistics.
-     * The request body is struct ofp_aggregate_stats_request.
-     * The reply body is struct ofp_aggregate_stats_reply. */
-    OFPST_AGGREGATE,
-
-    /* Flow table statistics.
-     * The request body is empty.
-     * The reply body is an array of struct ofp_table_stats. */
-    OFPST_TABLE,
-
-    /* Physical port statistics.
-     * The request body is empty.
-     * The reply body is an array of struct ofp_port_stats. */
-    OFPST_PORT,
-
-    /* Vendor extension.
-     * The request and reply bodies begin with a 32-bit vendor ID, which takes
-     * the same form as in "struct ofp_vendor_header".  The request and reply 
-     * bodies are otherwise vendor-defined. */
-    OFPST_VENDOR = 0xffff
-};
-
-struct ofp_stats_request {
-    struct ofp_header header;
-    uint16_t type;              /* One of the OFPST_* constants. */
-    uint16_t flags;             /* OFPSF_REQ_* flags (none yet defined). */
-    uint8_t body[0];            /* Body of the request. */
-};
-OFP_ASSERT(sizeof(struct ofp_stats_request) == 12);
-
-enum ofp_stats_reply_flags {
-    OFPSF_REPLY_MORE  = 1 << 0  /* More replies to follow. */
-};
-
-struct ofp_stats_reply {
-    struct ofp_header header;
-    uint16_t type;              /* One of the OFPST_* constants. */
-    uint16_t flags;             /* OFPSF_REPLY_* flags. */
-    uint8_t body[0];            /* Body of the reply. */
-};
-OFP_ASSERT(sizeof(struct ofp_stats_reply) == 12);
-
-#define DESC_STR_LEN   256
-#define SERIAL_NUM_LEN 32
-/* Body of reply to OFPST_DESC request.  Each entry is a NULL-terminated 
- * ASCII string. */
-struct ofp_desc_stats {
-    char mfr_desc[DESC_STR_LEN];       /* Manufacturer description. */
-    char hw_desc[DESC_STR_LEN];        /* Hardware description. */
-    char sw_desc[DESC_STR_LEN];        /* Software description. */
-    char serial_num[SERIAL_NUM_LEN];   /* Serial number. */
-};
-OFP_ASSERT(sizeof(struct ofp_desc_stats) == 800);
-
-/* Body for ofp_stats_request of type OFPST_FLOW. */
-struct ofp_flow_stats_request {
-    struct ofp_match match;   /* Fields to match. */
-    uint8_t table_id;         /* ID of table to read (from ofp_table_stats)
-                                 or 0xff for all tables. */
-    uint8_t pad;              /* Align to 32 bits. */
-    uint16_t out_port;        /* Require matching entries to include this 
-                                 as an output port.  A value of OFPP_NONE 
-                                 indicates no restriction. */
-};
-OFP_ASSERT(sizeof(struct ofp_flow_stats_request) == 40);
-
-/* Body of reply to OFPST_FLOW request. */
-struct ofp_flow_stats {
-    uint16_t length;          /* Length of this entry. */
-    uint8_t table_id;         /* ID of table flow came from. */
-    uint8_t pad;
-    struct ofp_match match;   /* Description of fields. */
-    uint32_t duration;        /* Time flow has been alive in seconds. */
-    uint16_t priority;        /* Priority of the entry. Only meaningful
-                                 when this is not an exact-match entry. */
-    uint16_t idle_timeout;    /* Number of seconds idle before expiration. */
-    uint16_t hard_timeout;    /* Number of seconds before expiration. */
-    uint16_t pad2[3];         /* Pad to 64 bits. */
-    uint64_t packet_count;    /* Number of packets in flow. */
-    uint64_t byte_count;      /* Number of bytes in flow. */
-    struct ofp_action_header actions[0]; /* Actions. */
-};
-OFP_ASSERT(sizeof(struct ofp_flow_stats) == 72);
-
-/* Body for ofp_stats_request of type OFPST_AGGREGATE. */
-struct ofp_aggregate_stats_request {
-    struct ofp_match match;   /* Fields to match. */
-    uint8_t table_id;         /* ID of table to read (from ofp_table_stats)
-                                 or 0xff for all tables. */
-    uint8_t pad;              /* Align to 32 bits. */
-    uint16_t out_port;        /* Require matching entries to include this 
-                                 as an output port.  A value of OFPP_NONE 
-                                 indicates no restriction. */
-};
-OFP_ASSERT(sizeof(struct ofp_aggregate_stats_request) == 40);
-
-/* Body of reply to OFPST_AGGREGATE request. */
-struct ofp_aggregate_stats_reply {
-    uint64_t packet_count;    /* Number of packets in flows. */
-    uint64_t byte_count;      /* Number of bytes in flows. */
-    uint32_t flow_count;      /* Number of flows. */
-    uint8_t pad[4];           /* Align to 64 bits. */
-};
-OFP_ASSERT(sizeof(struct ofp_aggregate_stats_reply) == 24);
-
-/* Body of reply to OFPST_TABLE request. */
-struct ofp_table_stats {
-    uint8_t table_id;        /* Identifier of table.  Lower numbered tables 
-                                are consulted first. */
-    uint8_t pad[3];          /* Align to 32-bits. */
-    char name[OFP_MAX_TABLE_NAME_LEN];
-    uint32_t wildcards;      /* Bitmap of OFPFW_* wildcards that are 
-                                supported by the table. */
-    uint32_t max_entries;    /* Max number of entries supported. */
-    uint32_t active_count;   /* Number of active entries. */
-    uint64_t lookup_count;   /* Number of packets looked up in table. */
-    uint64_t matched_count;  /* Number of packets that hit table. */
-};
-OFP_ASSERT(sizeof(struct ofp_table_stats) == 64);
-
-/* Body of reply to OFPST_PORT request. If a counter is unsupported, set
- * the field to all ones. */
-struct ofp_port_stats {
-    uint16_t port_no;
-    uint8_t pad[6];          /* Align to 64-bits. */
-    uint64_t rx_packets;     /* Number of received packets. */
-    uint64_t tx_packets;     /* Number of transmitted packets. */
-    uint64_t rx_bytes;       /* Number of received bytes. */
-    uint64_t tx_bytes;       /* Number of transmitted bytes. */
-    uint64_t rx_dropped;     /* Number of packets dropped by RX. */ 
-    uint64_t tx_dropped;     /* Number of packets dropped by TX. */ 
-    uint64_t rx_errors;      /* Number of receive errors.  This is a super-set
-                                of receive errors and should be great than or
-                                equal to the sum of all rx_*_err values. */
-    uint64_t tx_errors;      /* Number of transmit errors.  This is a super-set
-                                of transmit errors. */
-    uint64_t rx_frame_err;   /* Number of frame alignment errors. */ 
-    uint64_t rx_over_err;    /* Number of packets with RX overrun. */ 
-    uint64_t rx_crc_err;     /* Number of CRC errors. */ 
-    uint64_t collisions;     /* Number of collisions. */ 
-};
-OFP_ASSERT(sizeof(struct ofp_port_stats) == 104);
-
-/* Vendor extension. */
-struct ofp_vendor_header {
-    struct ofp_header header;   /* Type OFPT_VENDOR. */
-    uint32_t vendor;            /* Vendor ID:
-                                 * - MSB 0: low-order bytes are IEEE OUI.
-                                 * - MSB != 0: defined by OpenFlow
-                                 *   consortium. */
-    /* Vendor-defined arbitrary additional data. */
-};
-OFP_ASSERT(sizeof(struct ofp_vendor_header) == 12);
+#include "openflow/openflow-1.0.h"
+#include "openflow/openflow-1.1.h"
+#include "openflow/openflow-1.2.h"
 
 #endif /* openflow/openflow.h */